Produse pentru fara (65)

Il panettone è un tradizionale dolce natalizio italiano, originario di Milano. Caratterizzato dalla sua forma alta e a cupola, è realizzato con un impasto lievitato dolce, arricchito con frutta candita, uvetta e scorza d’arancia. La sua preparazione richiede diversi giorni per la lavorazione e la lievitazione naturale, che conferisce al dolce la sua consistenza soffice e il sapore distintivo. Il panettone è spesso associato al periodo natalizio ed è apprezzato sia in Italia che a livello internazionale come simbolo della tradizione e dell’artigianalità italiana. confezioni da 12, 1 pallet = 10 confezioni, scadenza 30/04/25 Minimo ordine : 30 pallets

PRESA RUBINETTO FIL. 3/4"F CODICE:59.18 CONFEZIONE:BLISTER

Controllore adattivo da 7'' touch screen. Costruzione di tipo monoscocca. Costruzione interna ed esterna in acciaio inox AISI 304. Piedi in acciaio inox regolabili in altezza. Guarnizione porta resistente alle temperature minime di raggiungimento. Profili cella e Profili porta resistenti alle temperature minime di raggiungimento. Vano tecnico posto sotto la cella. Unità condensatrice posta nel vano tecnico, estraibile e facilmente ispezionabile. Quadro elettrico a connettori, estraibile e facilmente ispezionabile. Porta-teglie multilivello regolabile in acciaio inox AISI 304, adatto a contenere teglie GN 1/1 ed EN 60x40. Struttura facilmente removibile per operazioni di pulizia. Cella interna con angoli raggiati per facilitare le operazioni di pulizia. Isolamento in poliuretano ad alta densità senza CFC. Evaporatore con protezione antiruggine cataforesi. Cerniera porta lato sinistro. Perimetro porta riscaldato per evitare la formazione di brina. Resa frigorifera richiesta:4452 W Linea liquido:3/8" [10] mm Linea aspirazione:1/2" [12] mm Condensazione:remoto Gas refrigerante:R452A GWP:2141 Classe climatica:4 Alimentazione (Ph / Volts / Hz):220-240/1N/50 Max assorbimento elettrico cicli freddo:370 W - 1.94 A Capacità abbattimento (+90°C/+3 °C):45 kg

Con questo tipo di unità è possibile eseguire forature con entrata del punzone da un lato e uscita dal lato opposto dove una matrice temprata evita la deformazione, si possono eseguire due fori con entrata dei punzoni contrapposti o forature non passanti. E’ possibile la costruzione di unità che realizzano più fori contemporaneamente. In testa ai tubi è possibile eseguire forature senza deformazioni grazie all’utilizzo di anime interne.

Syntech Pavicrom SBV Colored two-component finish, permeable to water vapour, based on epoxy resins in water dispersion. Ideal for the pigmented coating of industrial floors and concrete constructions in general with residual humidity and without vapor barrier. Surfaces treated with Syntech Pavicrom SBV are easy to clean and guarantee excellent resistance to mechanical wear, as well as being highly resistant to water, alkaline solutions, detergents and hydrocarbons (petroleum, diesel, petrol, etc.) . Protective and decorative painting of concrete floors, restoration of the color of old resin floors, glazing of wall skirting boards, etc. Ideal for mechanical workshops, manufacturing industries, warehouses and factories in general where high chemical and mechanical resistance is required. It can be used both indoors and outdoors. Concrete The surfaces to be coated must be stable, clean and free of substances that could affect the adhesion of the coating. In case of restoration, use suitable mortars and products suitable for the system beforehand. Wait for the drying times before applying the next coat. The tensile strength must not be less than 1.5 N/mm². Existing paints, coatings or paints, cement grout residues, release agents, oils, greases, silicones, etc. they can be removed mechanically by sandblasting, blasting, hydroblasting or chemical removal. Cracks and fissures In case of static cracks, use Syntech Primer EP-W for sealing. The sealing of dynamic cracks or cracks larger than 4-5 mm must be assessed on site. Generally they can be grouted with elastomeric materials or act as expansion joints. Grouting and spot repairs Any holes or repairs to portions of concrete can be made with mortars from the REPAR line or by applying epoxy mortar made with Syntech Primer EP-W and quartz mastics. Apply a coat of Syntech Primer EP-W as a bonding primer, then proceed to seal and repair the damaged and broken concrete by applying the epoxy mortar. Any small filling of holes and cracks can be done by applying Syntech AS 21 epoxy mortar. Resin coatings The surfaces to be covered must be stable, clean and free of substances such as dirt, grease, oil, etc. which can affect the adhesion of the coating. Smooth the surface by mechanical sanding with diamond discs and vacuum. It is recommended to wash the surfaces and let them dry completely before applying the finish. Primer for concrete Syntech Pavicrom SBV can be applied directly to cementitious substrates as the product diluted with a maximum of 25% by weight of clean water acts as an anchoring primer. Resin coatings The application of Syntech Pavicrom SBV on resinous and multilayer systems must always be preceded by sanding the entire surface to promote and guarantee optimal adhesion of the product to the support. Combine the two components in the indicated mixing ratio. Add component B (hardener) to component A (base) and mix well until a completely homogeneous product is obtained. It is advisable to start mixing briefly with an electric drill at low speed and then intensify the stirring up to a maximum of 300-400 rpm. Leave the emulsion obtained to rest in the container, respecting the following induction times: at 15°C ~ 20 minutes at 25°C ~ 15 minutes at 30°C ~ 10 minutes The product can be applied uniformly using a spray gun or short-haired roller to avoid accumulations of material which could give rise to aesthetic defects. The application of the product must be carried out by crossing the passes and paying particular attention to the shots, regularly unloading the roller beyond the applied area to obtain a uniform film and eliminate any accumulations of product. Apply the first coat of Syntech Pavicrom SBV diluted with a maximum of 25% by weight of clean water as primer. The dilution must be carried out under mechanical stirring, adding the necessary quantity of water at the end of the induction time. Do not dilute the product further during application if it thickens it means that the use time has expired. Create a new emulsion with highly mixed material. Wait at least 12 hours, then apply the second one Colored finish diluted with a maximum of 20% weight of clean water, respecting the consumption and thicknesses indicated. It is possible to create non-slip finishes by adding quartz or hollow glass spheres. From 0.15 to 0.20 kg of Syntech Pavicrom SBV for each square meter of surface to be covered, for each coat. Pail 2.5 kg [A] - Pail 5 kg [A] - Pail 3 kg [B] - Pail 6 kg [B] - Kit: 1 Pail 2.5 kg [A] + 1 Pail 3 kg [B] - Kit: 1 Pail 5 kg [A] + 1 Pail 6 kg [B]

La scala con gabbia alla marinara è un elemento chiave quando si tratta di sicurezza. La gabbia di protezione è progettata per prevenire cadute accidentali durante la salita e la discesa, offrendo una sicurezza senza compromessi. Inoltre, i pioli antiscivolo sono realizzati per garantire una presa sicura in ogni condizione. Il nostro sistema è conforme alle normative:

Le confetture senza conservanti sono prodotti dolciari realizzati con frutta e zucchero, ma senza l'aggiunta di conservanti chimici o artificiali. In queste confetture, la conservazione del prodotto è garantita esclusivamente attraverso metodi naturali, come l'uso di zucchero, la corretta cottura della frutta, e il rispetto delle norme igieniche durante la preparazione e il confezionamento. La sterilizzazione del prodotto, che avviene attraverso la cottura e l'invasamento a caldo in contenitori sigillati ermeticamente, contribuisce a prevenire lo sviluppo di batteri e muffe, permettendo una conservazione sicura anche senza l'uso di conservanti aggiunti.

ART. 230 CERNIERE A NASTRO PESANTI IN ACCIAIO GREZZO, SENZA FORI Confezione:20 Dimensioni (mm):1980 x 40 x 1,5

Acquisizione Senza Titolo6944_grande

RUST, Conceptual Bitter est un bitter naturel obtenu par infusion à froid d'une grande quantité de baies de genièvre, de quinquina et de sureau, de fines écorces d'agrumes, de pulpe de figue, de plantes sauvages et médicinales du maquis méditerranéen, y compris la menthe et l'eucalyptus. L'infusion des plantes dans l'alcool repose dans l'obscurité pendant plusieurs mois. - À l'œil, elle apparaît de couleur ambrée - Au nez, elle est balsamique, herbacée ; les notes amères du quinquina se fondent dans les traces balsamiques de l'eucalyptus. - Le miel de sulla donne au goût une touche sophistiquée. - Fin de bouche persistante avec des notes épicées méditerranéennes douces. Le goût soyeux laisse le palais propre et équilibré. Goût enveloppant, agréable jusqu'à la fin. Capacité: 70cl - 30%vol avec coffre cadeau

This blend preserves the intense and deep taste of a real Italian espresso. Paranà Decaffeinated Coffee is highly digestible, has a reduced content of caffeine and it comprises high-quality Arabica coffee beans processed with one of the best decaffeination methods. The result is a dense and nutty cream, with a full-bodied caramel aroma, and hints of chocolate and vanilla.

DOP Genoese basil pesto without garlic. A version of our Pesto prepared without garlic. Apart from the absence of garlic, the recipe is the same as normal Pesto (the traditional recipe is however very delicate). Contains extra virgin olive oil, basil grown in Liguria (Basilico Genovese DOP), pine nuts and Grana Padano. Compared to homemade pesto, only citric acid (acidifier) ​​and ascorbic acid (antioxidant) are added. No cashews, wheat germ or other ingredients foreign to the Ligurian tradition. Calvi DOP Genoese basil pesto without garlic has an intense green color and is characterized by a fresh and delicate flavour. Product label In the 'Attachments' you will find the label with the nutritional data and other information about the product. Pairings Exceptional seasoning for first courses. Storage method Store in a dry and cool place, away from heat sources. Once opened, store in the refrigerator (+4°C) and consume within 5 days. Code:PESTO SA 180

One space high grounded-based bike conjuction rack in galvanized steel, silver color, without caps. Upper curve is a patented design by ANDRYS srl to set even the disk brake bikes. Projected to be the connection between Art.1203 B and Art. 1205 B, or between two or more SKU:Art. 1001 C-B Size:38.5 x 42 cm h 41 cm Weight:2,5 kg Dimensions:38,5 × 42 × 42 cm

Composition 100% Sangiovese Grosso grapes Place of origin The vineyards on the Abbadia Ardenga estate situated on the Sienese slope of the hill of Montalcino. South-west exposure Training System Spurred cordon Average Yield In Grapes 60 quintals/Ha Harvesting The grapes are hand-picked in early October Fermentation In controlled-temperature, stainless steel tanks. This is a highly innovative wine that follows the biological process of fermentation and adopts the principles of biodynamics to activate the yeasts, which are responsible for the first and most important process that transforms grapes into wine. The result is a superior product with characteristics that mark it out from common wines: the total absence of proteins or substances of animal origin, sulphur dioxide, chemical products or stabilisers, and no blending with other musts or wines. Fermentation Period 20/22 days Maturing Period 12 months in stainless steel tanks 12 months in the bottle . Organoleptic Characteristics Colour Ruby red Aroma Intense, distinctive and winy perfume, with scents of hazelnut and red fruits such as plums and sour black cherries Taste Full and balanced, persistent, very digestible, because the special fermentation process divides proteins and amino acids into simpler chains that are more easily assimilated. Even the alcohol is more easily broken down by the organism. Pairings All the savoury dishes of traditional cuisine, especially stews and ripe Pecorino cheese Serving Suggestions If possible, uncork the bottle a few hours before serving at a temperature of approx. 20°C. Serve in tasting glasses.

TUBO PU 98 SH 6x4x1 MM Materiale:PU Tipo:98 SH Diametro:6x4 Colore:Cristallo, Azzurro trasparente

Le buste idonea contatto per alimenti che forniamo, sono neutre senza stampa oppure personalizzabili con il vostro marchio, sono vendute in scatole di cartone, possono contenere alimenti conservati a temperatura ambiente oppure in cella freezer

Cable entry, diameter 20 Material:ABS - white color

Rete portaoggetti per sedili auto, confezionata in Nylon alta tenacità, tessitura senza nodo a maglia romboidale o esagonale, tinta a campione con coloranti solidi ed ecocompatibili, fornibile anche infilata su cordino elastico e montata su frame metallico.

MULTIFUNCTION WEIGHT INDICATORS FPDFWXP - IP65 Versatile, high-performance weight indicators. Equipped with a wide range of different modes and interfaces, they are suitable for any type of industrial or commercial application. CE-M homologable (OIML R-76 / EN 45501). Available in the following models: FPDFWXP: indicator with 5-key keypad with backlit LCD display. FPDFWKXP: indicator with 17-key keypad, with backlit LCD display. FPDFWKPXP: indicator with 17-key keyboard with integrated thermal printer and calendar clock, backlit LCD display. For more technical information, please visit the product page: https://www.fer-plast.com/en/product/handling-and-storage/weighing-systems/indicatori-di-peso/dfwxp-detail

Controllore adattivo da 7'' touch screen. Costruzione di tipo monoscocca. Costruzione interna ed esterna in acciaio inox AISI 304. Abbattitore di tipo Roll-out per l'inserimento di carrelli per teglie GN2/1 o EN 60x80 Guarnizione porta resistente alle temperature minime di raggiungimento. Profili cella e profili porta resistenti alle temperature minime di raggiungimento. Vano tecnico posto sopra la cella. Unità condensatrice posta nel vano tecnico, estraibile e facilmente ispezionabile dal retro. Quadro elettrico posto nel vano dietro al controllore facilmente apribile per ispezioni tecniche. Cella interna con angoli raggiati per facilitare le operazioni di pulizia. Isolamento in poliuretano ad alta densità senza CFC. Evaporatore con protezione antiruggine cataforesi. Cerniera porta lato sinistro. Perimetro porta riscaldato per evitare la formazione di brina. Resa frigorifera richiesta:17977 W Linea liquido:3/8" [10] mm Linea aspirazione:1/2" [12] mm Gas refrigerante:R452A GWP:2141

Controllore adattivo da 7'' touch screen. Costruzione di tipo monoscocca. Costruzione interna ed esterna in acciaio inox AISI 304. Piedi in acciaio inox regolabili in altezza. Guarnizione porta resistente alle temperature minime di raggiungimento. Profili cella e profili porta resistenti alle temperature minime di raggiungimento. Vano tecnico posto sopra la cella. Unità condensatrice posta nel vano tecnico, estraibile e facilmente ispezionabile. Quadro elettrico a connettori, estraibile e facilmente ispezionabile. Porta-teglie multilivello regolabile in acciaio inox AISI 304, adatto a contenere teglie GN 1/1 ed EN 60x40. Struttura facilmente removibile per operazioni di pulizia. Cella interna con angoli raggiati per facilitare le operazioni di pulizia. Isolamento in poliuretano ad alta densità senza CFC. Evaporatore con protezione antiruggine cataforesi. Cerniera porta lato sinistro. Perimetro porta riscaldato per evitare la formazione di brina. Resa frigorifera richiesta:7626 W Linea liquido :3/8" [10] mm Linea aspirazione:1/2" [12] mm Condensazione:remoto Gas refrigerante:R452A GWP:2141 Classe climatica:4 Alimentazione (Ph / Volts / Hz):220-240/1N/50 Max assorbimento elettrico cicli freddo:555 W - 2.96 A Capacità abbattimento (+90°C/+3 °C):80 kg

Controllore adattivo da 7'' touch screen. Costruzione interna ed esterna in acciaio inox AISI 304. Piedi in acciaio inox regolabili in altezza. Guarnizione porta resistente alle temperature massime e minime di raggiungimento. Vano tecnico posto sotto la cella. Unità condensatrice posta nel vano tecnico, estraibile e facilmente ispezionabile. Quadro elettrico a connettori, estraibile e facilmente ispezionabile. Porta-teglie multilivello regolabile in acciaio inox AISI 304, adatto a contenere teglie GN 1/1 ed EN 60x40. Struttura facilmente removibile per operazioni di pulizia. Cella interna con angoli raggiati per facilitare le operazioni di pulizia. Isolamento in poliuretano ad alta densità senza CFC. Evaporatore con protezione antiruggine cataforesi. Cerniera porta lato sinistro. Perimetro porta riscaldato per evitare la formazione di brinaCicli a sonda: la temperatura della sonda al cuore comanda il ciclo garantendo controllo e precisione. Resa frigorifera richiesta:4452 W Linea liquido:3/8" [10] mm Linea aspirazione:1/2" [12] mm Condensazione:remoto Gas refrigerante:R452A GWP:2141 Classe climatica:4 Alimentazione (Ph / Volts / Hz):220-240/1N/50 Max assorbimento elettrico cicli freddo:370 W - 1.94 A Max assorbimento elettrico cicli caldo (optional umidità):1240 W (1240 W)

Controllore adattivo da 7'' touch screen. Costruzione interna ed esterna in acciaio inox AISI 304. Piedi in acciaio inox regolabili in altezza. Guarnizione porta resistente alle temperature massime e minime di raggiungimento. Vano tecnico posto sotto la cella. Unità condensatrice posta nel vano tecnico, estraibile e facilmente ispezionabile. Quadro elettrico a connettori, estraibile e facilmente ispezionabile. Porta-teglie multilivello regolabile in acciaio inox AISI 304, adatto a contenere teglie GN 1/1 ed EN 60x40. Struttura facilmente removibile per operazioni di pulizia. Cella interna con angoli raggiati per facilitare le operazioni di pulizia. Isolamento in poliuretano ad alta densità senza CFC. Evaporatore con protezione antiruggine cataforesi. Cerniera porta lato sinistro. Perimetro porta riscaldato per evitare la formazione di brinaCicli a sonda: la temperatura della sonda al cuore comanda il ciclo garantendo controllo e precisione. Resa frigorifera (Evap. -10°C /Cond. 45°C):4452 W Condensazione:autonomo aria Gas refrigerante:R452A GWP:2141 Classe climatica:4 Alimentazione (Ph / Volts / Hz):380-420/3N/50 Max assorbimento elettrico cicli freddo:2576 W - 5.69 A Max assorbimento elettrico cicli caldo (optional umidità):1240 W (1240 W) Capacità abbattimento (+90°C/+3°C):45 kg Capacità surgelazione (+90°C/-18°C):34 kg

Syntech HAG Flex Mono-component semi-flexible, expanding (increases its initial volume of about 10 times) polyurethane resin, free from solvents, perfect for sealing small and large water leaks in the concrete or in solid masonry in general by injection. Perfect for filling and sealing small cavities, joints and discontinuities subject to movement. In contact with water, SYNTECH H.A.G. FLEX forms a flexible polyurethane foam. The product increases its initial volume by about 10 times in contact with fresh water. If used in environments with the presence of sea water, the expansion will take place in any case but slightly reduced in volume. Technically, it is a mono-component product which reacts spontaneously with the water present in the masonry to be sealed. The speed of reaction with just water, however, would be very slow relative to the construction site requirements. It is therefore essential to use an expansion accelerator, sold in combination with the same resin (component B). The polyurethane foam resulting from injection operations, will keep its volume stable once expanded. A good resistance to hydraulic pressure in the water flow after about 1-2 minutes from the time the reaction took place. The formation of CO₂, typical of the polyurethane reaction, will further pressurise the system, thus favouring the penetration of the resin in the cracks and cavities. In a free environment, SYNTECH H.A.G. FLEX expands to about 10 times its initial volume. Stop the infiltration of water in underground spaces. Perfect for waterproofing filling small cavities, cracks, fissures, static and dynamic joints in concrete and in solid masonry in general. The application surfaces should be clean, free of incrustations, crumbling and non-adhering parts, dust, moss, moulds, etc. Prepare the appropriate injectors, usually "staggered" (from one side to the other of the discontinuity to be sealed). Preliminarily inject abundant water in the discontinuity until saturation (if not already present). Pour 100 g of component B for each kilogram of component A (ideal and recommended dosage), in a bucket. Mix the two components thoroughly with a hand tool (do not use a mixer drill). Keep in mind that the resin could react even with the environmental humidity, therefore, to reduce the waste of material it is advisable to prepare a quantity of mixture strictly necessary for the intended use from time to time (2-3 kg of mixture at a time may be more that sufficient). The mixture of SYNTECH H.A.G. FLEX and its catalyst can be injected with a manual or electric pump for monocomponent resins, at pressures ranging between 40 and 200 bar. The reaction speed can easily be adjusted based on the accelerator (component B) quantity. Adding a greater quantity of catalyst, compared to the recommended 10%, reduces the reaction time. Always clean the pump used thoroughly at the end of the operations with Nitro thinner and the specific lubricant detergent SYNTECH H.A.G. CLEANER. The consumption of the product depends on the size of the vacuum volume to be filled and on the expansive reaction that occurs after mixing the two components in relation to the amount of water present. Can 25 kg [A] - Plastic can 2.3 kg [B] - Kit: 1 Can 25 kg [A] + 1 Plastic can 2.3 kg [B]

Syntech HAG Eco Mono-component, enabled for contact with drinking water, semi-flexible, expanding (increases its initial volume of about 20 times) polyurethane resin, free from solvents, perfect for sealing small and large water leaks in the concrete or in solid masonry in general by injection. Perfect for filling large voids and loose stone foundations inside the walls. In contact with water, SYNTECH H.A.G. ECO, forms a semi-flexible polyurethane foam. The product increases its initial volume by about 20 times in contact with fresh water. If used in environments with the presence of sea water, the expansion will take place in any case but slightly reduced in volume. Technically, it is a mono-component product which reacts spontaneously with the water present in the masonry to be sealed. The speed of reaction with just water, however, would be very slow relative to the construction site requirements. It is therefore essential to use an expansion accelerator, sold in combination with the same resin (component B). The polyurethane foam resulting from injection operations, will keep its volume stable once expanded. A good resistance to hydraulic pressure in the water flow after about 1-2 minutes from the time the reaction took place. The formation of CO₂, typical of the polyurethane reaction, will further pressurise the system, thus favouring the penetration of the resin in the cracks and cavities. In a free environment, SYNTECH H.A.G. ECO expands to about 20 times its initial volume. Stop the infiltration of water in underground spaces. Perfect for waterproofing filling large cavities or loose stone foundations in the concrete and in solid masonry in general. The application surfaces should be clean, free of incrustations, crumbling and non-adhering parts, dust, moss, moulds, etc. Prepare the appropriate injectors, usually "staggered" (from one side to the other of the discontinuity to be sealed). Preliminarily inject abundant water in the discontinuity until saturation (if not already present). Pour 100 g of component B for each kilogram of component A (ideal and recommended dosage), in a bucket. Mix the two components thoroughly with a hand tool (do not use a mixer drill). Keep in mind that the resin could react even with the environmental humidity, therefore, to reduce the waste of material it is advisable to prepare a quantity of mixture strictly necessary for the intended use from time to time (2-3 kg of mixture at a time may be more that sufficient). The mixture of SYNTECH H.A.G. ECO and its catalyst can be injected with a manual or electric pump for monocomponent resins, at pressures ranging between 40 and 200 bar. The reaction speed can easily be adjusted based on the accelerator (component B) quantity. Adding a greater quantity of catalyst, compared to the recommended 10%, reduces the reaction time. Always clean the pump used thoroughly at the end of the operations with Nitro thinner and the specific lubricant detergent SYNTECH H.A.G. CLEANER. The consumption of the product depends on the size of the vacuum volume to be filled and on the expansive reaction that occurs after mixing the two components in relation to the amount of water present. Can 25 kg [A] - Plastic can 2.3 kg [B] - Kit: 1 Can 25 kg [A] + 1 Plastic can 2.3 kg [B]

ART. 230 CERNIERE A NASTRO PESANTI IN ACCIAIO GREZZO, SENZA FORI Confezione:20 Dimensioni (mm):1980 x 50 x 1,5

ART. 230 CERNIERE A NASTRO PESANTI IN ACCIAIO GREZZO, SENZA FORI Confezione:10 Dimensioni (mm):1980 x 50 x 2,0

ART. 230 CERNIERE A NASTRO PESANTI IN ACCIAIO GREZZO, SENZA FORI Confezione:10 Dimensioni (mm):1980 x 60 x 2,0

Grout Garden Quick-setting cementitious mortar for assembling and fixing fence posts, rotating clothesline, etc…, in holes made in the ground… without mixing with a drill, whisk, cement mixer or other. Suitable for mounting and fixing fence posts, rotating clothesline, etc ..., in holes made in the ground without mixing with a drill, whisk, cement mixer or other. For the installation of the rapid mortar it is necessary to dig a sufficiently large hole or trench. The ground in which the hole will be made must be stable and well compacted. Before processing, the side and floor surfaces must be pre-wetted, avoiding the formation of puddles. The dry mix should be applied in layers of about 10-15 cm. With a hand watering can you can wet and compact the mortar with a trowel, considering a water requirement of about 3-3.5 liters for each 25 kg bag of Grout Garden. As soon as the water has completely penetrated into the mortar, we will proceed with the laying of another 10-15 cm layer, repeating the operation. Compact and smooth the surface of the mortar as well as possible. Depending on the temperature of the air and the environment, the hardening of the product will start after about 5 minutes. After about 1 hour, the hardened mortar can be drilled with a drill to fix any poles or signs. Complete hardening, like all cementitious materials, will be obtained after about 28 days. Approximately 19 kg / m² of Grout Garden for each centimeter of thickness to be created (approximately 1900 kg per cubic meter). Packaging: 25 kg bag Unit of Measure: €/kg

RUST, Conceptual Bitter est un amer naturel obtenu par infusion à froid d'une grande quantité de baies de genièvre, de quinquina et de sureau, de fines écorces d'agrumes, de pulpe de figue, de plantes sauvages et médicinales du maquis méditerranéen, y compris la menthe et l'eucalyptus. L'infusion des plantes dans l'alcool repose dans l'obscurité pendant plusieurs mois. - À l'œil, elle apparaît de couleur ambrée - Au nez, elle est balsamique, herbacée ; les notes amères du quinquina se fondent dans les traces balsamiques de l'eucalyptus. - Le miel de sulla donne au goût une touche sophistiquée. - Fin de bouche persistante avec des notes épicées méditerranéennes douces. Le goût soyeux laisse le palais propre et équilibré. Goût enveloppant, agréable jusqu'à la fin. RUST, une amertume conceptuelle, est sublime dans les boissons douces les plus classiques, même glacées, et elle est très performante dans les mélanges expérimentaux avec une douce amertume.