Produse pentru tratare (209)

Producto a base de resina (melamina), luego granulado y clasificado en diferentes tamaños. Este abrasivo limpia superficies sin provocar asperezas ni alteración dimensional de las piezas. Dureza: 4 mohs Forma: angular Densidad: 1,45 - 1,52 g / cm3 Calidad: MIL-P-85891

The CS-TC suspended load shot blasting machine was developed for the surface treatment of medium and large parts. The turbines are placed on either side of the blasting chamber according to the optimal configuration to cover the parts to be treated. This shot blast machine can be installed in line with painting equipment.

Abrasivo vegetal extremamente macio, fabricado a partir de cascas de noz trituradas, obtendo-se várias granulometrias devidamente calibradas. Possui excelente durabilidade. > Aplicação industrial de abrasivos > Bem-Vindo à BLASQEM! O seu Especialista em Granalhas, Abrasivos e Equipamentos. Dureza:2,5 – 3,5 mohs Forma:angular Densidade:1,0 - 1,2g/cm3

Natural garnet sand is a non-active mineral abrasive which does not cause silicosis. It has high performance, ensuring efficiency and economical process with medium oxidation level. Its grains are microcrystalline, with more or less irregular rounded shapes. Hardness: 6-7.5 mohs Shape: irregular Density: 3.5-4.3 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Cette grenaille à haute dureté est particulièrement adaptée au grenaillage de surfaces métalliques dans les systèmes à air comprimé. Dureté: 57-67 HRC Forme: angulaire Densité: 7 g / cm3

Le sable grenat naturel est un abrasif minéral, non actif, qui ne provoque pas de silicose. Il a une haute performance, garantissant une efficacité et un processus économique avec un niveau d'oxydation moyen. Ses grains sont microcristallins, avec des formes arrondies plus ou moins irrégulières. Dureté: 6-7,5 mohs Forme: irrégulière Densité: 3,5-4,3 g / cm3

Gama de produtos fabricados maioritariamente nos EUA. Décadas de experiência no desenvolvimento e no fabrico de componentes e sistemas de corte por jato de água, permite-nos apresentar aos nossos clientes soluções de elevado desempenho com custos reduzidos.

Esta granalha é proveniente do corte de arame. Dependendo da matéria-prima usada, são obtidas diferentes durezas, sendo possível o fornecimento de diferentes esfericidades (G1, G2 e G3). > Aplicação industrial de abrasivos > Bem-Vindo à BLASQEM! O seu Especialista em Granalhas, Abrasivos e Equipamentos. Dureza:44 - 56 HRC Forma:cilíndrica ou esférica (G1,G2 ou G3) Densidade:7,4 g/cm3

La arena granate natural es un abrasivo mineral inactivo que no produce silicosis. Tiene un alto rendimiento, asegurando eficiencia y un proceso económico con un nivel de oxidación medio. Sus granos son microcristalinos, con formas redondeadas más o menos irregulares. Dureza: 6-7,5 mohs Forma: irregular Densidad: 3,5-4,3 g / cm3

This shot comes from cutting the wire. Depending on the raw material used, different hardnesses are obtained, making it possible to provide different sphericity (G1, G2 and G3). Hardness: 44-56 HRC Shape: cylindrical or spherical (G1, G2 or G3) Density: 7.4 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Esta granalha é proveniente do corte de arame de inox AISI304. Dependendo das características da matéria-prima usada, são obtidas diferentes durezas, sendo possível o fornecimento de diferentes esfericidades (G1, G2 e G3). > Aplicação industrial de abrasivos > Bem-Vindo à BLASQEM! O seu Especialista em Granalhas, Abrasivos e Equipamentos. Dureza:40 - 55 HRC Forma:cilíndrica ou esférica (G1,G2 ou G3) Densidade:7,8 g/cm3

Fabriqué à partir de résine (polycarbonate), granulée et classée en différentes dimensions. Cet abrasif nettoie les surfaces sans provoquer de rugosité ou d'altération dimensionnelle des pièces. Dureté: 120 HRR Forme: angulaire Densité: 1,20 g / cm3

Stainless steel chrome shot is more economical than chrome nickel; it has been specially developed for cleaning operations requiring less gloss or corrosion resistance. Hardness: ± 50 HRC Shape: irregular Density: 7.9 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

The NORMFINISH stripping cabinet, in suction, is equipped with a very efficient cyclone to guarantee the cleaning of the abrasive in order to prolong its life. This results in less wear on the equipment and better visibility of the operation. The suction guns with injector, as well as the mixing chamber, ensure a constant and optimized air / abrasive flow, which results in an efficient and fast blasting operation. Efficient abrasive cleaning thanks to the inclusion of cyclone Suitable for all types of abrasives Easy abrasive change Ergonomic construction. Dimensions of the blasting chamber (width x depth x height): DI12: 1100 x 800 x 740 mm DI14: 1370 x 890 x 810 mm

Developed to meet the highest quality parameters, its high quality components and a simple assembly system, allow it to operate in complete safety and ensure easy maintenance. With different capacities, this equipment is suitable for small interventions, or for operations that require a long working autonomy. Available with one or two chambers, with one or more outlets, the available models allow simple loading of the abrasive, as well as a smooth and uniform flow. Compact in design for easy handling and transport, the rugged valves and rubber coated fittings ensure operations with low maintenance costs. The pickling tanks allow different configurations, namely the use of different valves, suitable for different abrasives, as well as the inclusion in the supply of all the protective equipment necessary for the operation.

This shot is produced by cutting zinc or zinc / aluminum wire. Depending on the characteristics of the raw material used, different hardnesses are obtained, making it possible to provide different sphericity (G1, G2 and G3). Hardness: 30-55 HV0.1 Shape: cylindrical or spherical (G1, G2 or G3) Density: 6.7 - 7.5 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Produced from resin (acrylic), granulated and classified in different dimensions. This abrasive cleans surfaces without causing roughness or dimensional alteration of the parts. Hardness: 3.5 mohs Shape: angular Density: 1.10 - 1.20 g / cm3 Quality: MIL-P-85891 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Producido a partir de resina (urea), granulado y clasificado en diferentes tamaños. Este abrasivo limpia superficies sin provocar asperezas ni alteración dimensional de las piezas. Dureza: 3,5 mohs Forma: angular Densidad: 1,45 - 1,52 g / cm3 Calidad: MIL-P-85891

Producida a partir de resina (acrílica), granulada y clasificada en diferentes dimensiones. Este abrasivo limpia superficies sin provocar asperezas ni alteración dimensional de las piezas. Dureza: 3,5 mohs Forma: angular Densidad: 1,10 - 1,20 g / cm3 Calidad: MIL-P-85891

Granalla de Inoxidable Cr/Ni : el grano de cromo-níquel es un producto de alta calidad, utilizado en situaciones de alta demanda de protección contra la corrosión y brillo superficial, garantizando una larga duración en todas las operaciones de limpieza, con un producto no oxidante. Dureza: 7-7,5 mohs Forma: esférica Densidad: 3,8 g / cm3

A granalhadora de carga suspensa CS-TC foi desenvolvida para o tratamento superficial de peças de médio e grande porte. As turbinas são colocadas de ambos os lados da camara de jateamento de acordo com a configuração ótima para a cobertura das peças a tratar. Esta granalhadora pode ser instalada em linha com um equipamento de pintura.

Granalla de Acero : es adecuado para operaciones de limpieza más agresivas. Está disponible en tres tipos de dureza. Dureza: 40-61 HRC Forma: angular Densidad: 7,8 g / cm3

Produzido a partir de vidro transparente, a sua dureza e forma angular tornam este abrasivo ideal para aplicações de limpeza em metais não ferrosos. A granalha de vidro não cria oxidação nas superfícies tratadas, pelo facto de se tratar de um vidro que não reage quimicamente com outras substâncias. > Aplicação industrial de abrasivos > Bem-Vindo à BLASQEM! O seu Especialista em Granalhas, Abrasivos e Equipamentos. Dureza:6 mohs Forma:esférica Densidade:2,5 g/cm3

Chromium-nickel grain is a high quality product, used in situations of high demand for corrosion protection and surface shine, guaranteeing a long duration in all cleaning operations, with a non-oxidizing product. Hardness: 7 - 7.5 mohs Shape: spherical Density: 3.8 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Abrasif minéral synthétique de particules angulaires, sans silice libre. C'est un abrasif avec moins d'impact environnemental que le silicate de fer, car il contient un faible pourcentage de métaux lourds. Il permet d'obtenir des surfaces plus propres et une productivité élevée grâce à sa densité plus faible. Dureté: 6 mohs Forme: angulaire Densité: 2,4-2,6 g / cm3

Carboclean is a calcium carbonate, of very low hardness and high whiteness, suitable for dry and wet pickling, without damaging the treated surface. Hardness: 2.5 - 3 mohs Form: sub-angular Density: 2.5 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

El gabinete de decapado MISTRAL MI04 (Blast cabinets), en succión, está equipado con un ciclón muy eficiente para garantizar la limpieza del abrasivo con el fin de prolongar su vida. Esto se traduce en un menor desgaste del equipo y una mejor visibilidad de la operación. MISTRAL MI04 es un gabinete de sólida construcción, desarrollado con tecnología LEERING y una larga experiencia para obtener una cabina con una excelente relación calidad / precio. Pulido con chorro de arena rápido y eficaz Funcionamiento sin problemas Buena visibilidad gracias a una correcta circulación y filtración del aire. Construcción sólida y buen sellado. Dimensiones de la cámara de granallado (ancho x profundidad x altura): MI04: 1105 x 795 x 874 mm

Produits à partir de différentes résines, granulées et classés en différentes dimensions. Cet abrasif nettoie les surfaces sans provoquer de rugosité ou d'altération dimensionnelle des pièces. Dureté: 3,0 - 4,0 mohs Forme: angulaire Densité: 1,45 - 1,52 g / cm3 Qualité: industrielle

Produzido a partir de resina (polyamida), posteriormente granulada e classificadas em diferentes dimensões. Este abrasivo limpa as superfícies sem provocar rugosidade ou alteração dimensional das peças. > Aplicação industrial de abrasivos > Bem-Vindo à BLASQEM! O seu Especialista em Granalhas, Abrasivos e Equipamentos. Dureza:120 HRR Forma:angular Densidade:1,12 – 1,14 g/cm3

Su dureza y forma esférica permiten un acabado limpio, brillante y satinado, sin cambiar las dimensiones de las piezas. Las microesferas de vidrio no generan oxidación en las superficies tratadas, ya que es un vidrio que no reacciona químicamente con otras sustancias. Dureza: 6 mohs Forma: esférica Densidad: 2,5 g / cm3