Produse pentru mingoda (125)

Pied à rotule - Appuis et pieds de position Référence:02110 Rotule:acier de décolletage, cémenté Embase:Acier de décolletage Finition:Bruni

Housing anodised aluminium. Bearing surface Frelon (Teflon plus proprietary fillers). Virtually chemically inert. Selflubricating (no additional lubrication required). High temperature range (240 °C to +260 °C). Dampens vibrations. High static load capacity projected surface area x P (P = 1034 N/cm²) Suitable for food, pharmaceutical, medical and chemical applications. Insensitive to dirt. Reference:21495-01

These brackets are used to hang aluminium profiles for roller rails in a round profile. A mounting set is supplied. Reference:10448-51 Material:Steel Version:Electro zinc-plated

The cable clip is a fastening component for cables and hoses with a diameter up to 12 mm. The clip is mounted by inserting the Tkey into a Tslot and twisting through 90°. The cables are held in place by the stretched Oring. Form A with one channel. Form B with two separate channels. Reference:10454 Version:black

Housing washer, shaft washer and rolling elements, bearing steel. Cage, steel. Note Axial ball bearings accept high axial loads from one direction but may not be loaded radially. The bearings are separable. This means the bearing parts can be fitted independently of each other. The main dimensions of the axial ball bearing conform to ISO 104 and DIN 711. Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. These tolerance classes are standard and are well suited for most applications. Reference:23830 Temperature range:-30 °C to +150 °C

Aluminium outer ring and inner ring. Iglidur® J plastic slide elements. Stainless steel A2 screws. Version Anodised outer ring and inner ring. Note Aluminium plain bearings with replaceable, high performance material glide elements for rotary stages. Such a combination of materials guarantees absolutely lubricant and maintenancefree running. Simple assembly. High wear resistance. For high loads, high rigidity. Reference:21245-01 Temperature range:-50°C to +90°C

Insert trempé. Vis et insert brunis. Nota : Les vis de pression à insert bombé sont utilisées lorsqu'un point de pression ou de centrage est requis. Référence:07123

Ball lock pins are used for easy fastening or joining of components. The two balls are disengaged by pressing the push button and the pin can be slipped into holes in the workpieces. When the push button is released, the balls lock the connection securely. Shear force double shear (F) = S · τ aB max. The values given for the shear force are the theoretical breaking load. These are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been calculated in accordance with DIN 50141. Each user must determine individually whether the ball lock pin is suitable for the respective application. Different materials in which the ball lock pins are used, weather conditions and wear can influence the determined values. Ball lock pins with high shear strength are identified by a groove marking on the pin. Reference:03415

Fermeture rapide pour multiples possibilités d'utilisation, comme le maintien fermé de portes, de volets, de trappes et d'éléments similaires. La fermeture à billes se compose d'un corps et d‘une gâche qui s‘enclenche entre les deux billes. La gâche peut être insérée dans trois directions. La pression d'enclenchement est réglable. Référence:03075

Arbres cannelés selon DIN ISO 14 avec flancs droits parallèles. Un arbre à cannelures permet la transmission de couples élevés et un déplacement axial simultané. Les arbres cannelés sont étirés à froid. L'étirage à froid permet de ne pas interrompre le sens des fibres de la matière première. Les arbres cannelés présentent une résistance élevée. Tolérances Rectitude 0,8 mm/m. Torsion max. 0,5 mm/m. Référence:24010 Matière:Acier C45 ou Inox 1.4301 Finition:étiré à froid, naturel Sur demande:D’autres longueurs

The readytoinstall compact linear housing consists of extruded aluminium housing, installed linear ball bearing 2151102 and doublesided seal. Recommended shaft tolerance h6. Load rating according to specification of the linear ball bearing. With lubrication hole M8x1. Accessory Precision guide shafts 21595. Fastening screws 07160. Reference:21530-10 Material:Housing aluminium Version:Bright

These bushes are ideal for easy and quick positioning of ball lock pins and locking pins. Advantages: centred by the centring collar. easy and reliable installation. can be screwed into various materials. usable both sides Reference:03197 Material:Stainless steel 1.4305

Steel. Toothed pulleys without aluminium rim flanges. Version Steel phosphated. Aluminium bright. Note Standard HTD profile with metric pitch (halfround toothing). At least one belt pulley must have a rim flange. The toothed belt pulleys have a centre bore or a pilot hole (this can vary due to manufacturing methods). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore with which the toothed belt pulleys are supplied. This pilot/centre bore can be amended by the customer to produce a reamed bore, reamed bore with keyway or a tapped hole. Alternatively, customers can also use bushes to reduce the bore diameter. The pulleys may be recessed on the sides. Reference:22004

Les vis à tête cylindrique M4x35 pour fixer la partie inférieure sont comprises dans le matériel fourni.Les vis à tête cylindrique basse M5 pour fixer la partie supérieure ne sont pas comprises dans le matériel fourni. Nota : Cotes de montage pour une épaisseur de plaquettes de 6 mm. Les forces de serrage indiquées se réfèrent à une pression de service de 0,5 MPa ainsi qu'à une qualité de la surface de Ra 1,6 µm. La répétabilité est en l'occurrence d'env. ± 0,2 mm. Indication de dessin : 1) Position de « bridage » 2) Position de « débridage » 3) Plaque de fixation 4) Joint torique 5) Raccord de « bridage » 6) Raccord de « débridage » 7) Vis à tête cylindrique M4 8) Vis CHC à tête basse M5 9) Pièce Référence:03161-20 Finition:Inox poli

Housing hardened and black oxidised. Contact faces ground. Note: This positioning and clamping system is especially suitable for installation in fixtures (plates, clamping tower blocks, etc.) in all mounting positions. The modular design allows the number of and distance between the locating cylinders to be ideally adjusted to suit the clamping task. Due to the small diameters, the spacing between the locating cylinders can also be reduced. The 3 clamping balls are mechanically released through control of the locating cylinder with the "opening" connection. The 3 clamping balls move inward and the fixture can be changed quickly. For clamping, the air is taken from the "opening" connection and the "clamping" connection then receives air on the locating cylinder. The 3 clamping balls are mechanically driven outward again and the new fixture is clamped. To achieve optimal retaining force, the locating cylinder remains connected to the air. Reference:03161-02

Les 3 billes de serrage se débloquent sous l'effet de la pression de l'air. Elles sont entraînées vers l'intérieur, et l'outillage peut alors être remplacé. Lorsque l'air est évacué, les 3 billes de serrage sont chassées vers l'extérieur, permettant ainsi le serrage de l'outillage. Grâce à ce système rapide et fiable, les temps de changement d'outillage sont significativement réduits. Référence:03161 Matière:Acier de traitement Finition:Nickelé

Housing aluminium. Precision tube nickel plated steel. Trapezoidal thread spindle steel. Note The doubletube linear actuator can be operated manually or electrically. Due to the short duty cycle, the units can be adjusted several times a day at low speed and with high stability. Width, length and height adjustment possible. Reference:21250 Duty cycle:S3, 30% (at 60 min.) Temperature range:0° C to +60 °C

Ball end locating pins are specially designed to ease the locating process. The tendency to jam, caused by the locating hole not being at right angles to the pin or by the pushing force not being parallel to the pin axis, is minimized by the ball-end form (see illustration). Reference:03108

Roues dentées pour chaînes à rouleaux selon DIN ISO 606. Les roulements à billes possèdent un point de centrage ou sont prépercés (ceci peut varier en fonction du processus de fabrication). C'est la raison pour laquelle la dimension D3 max. indiquée dans le tableau correspond à la dimension maximale du perçage avec lequel les roulements à billes sont fournis. Ce préperçage / trou de centrage peut être pourvu d'un alésage, d'un alésage avec rainures ou d'un taraudage par le client. Le client peut également utiliser des douilles pour réduire son diamètre. Référence:22264 Matière:Acier doux Finition:Naturel, non trempé (non durcissable)

Carriage body zinc. Plastic bearing material iglidur® J. Rails anodised aluminium. Version Body chromed. Guide rail natural colour anodised. Note Miniature slide guides are maintenancefree and corrosion resistant. Very high speeds and accelerations are possible due to the low weight. Applicable temperature max. 80 °C. Miniature slide guides are insensitive to dust and are ideal for dry running. ** length L2 = 30 mm and * L = 1000 mm included L2 and L only available in full mm. Reference:21230

Corps en inox 1.4301. Palier en inox 1.4125. Joint en caoutchouc NBR. Le palier autoaligneur est composé d'un roulement à bille étanche à une rangée de billes avec une bague extérieure sphérique monté dans un boîtier. La surface sphérique du palier permet de compenser les défauts d'alignement de l'arbre. Les paliers sont fabriqués avec une tolérance positive. Cela se traduit par l'utilisation d'arbres à tolérances h ou coulissants. Les arbres sont fixés à l‘aide de 2 vis sans tête décalées de 120° sur la bague intérieure. Dans le cadre d'une utilisation normale, les paliers autoaligneurs ne nécessitent pas d'entretien grâce au dispositif de lubrification à vie intégré. Dans des conditions environnantes difficiles, le graisseur permet de lubrifier régulièrement le palier. Toutes les dimensions du boîtier sont des dimensions nominales pour lesquelles les tolérances de fonderie doivent être prises en compte. Référence:24240 Plage de température:-15 °C jusqu’à +100 °C Indication de dessin:Roulement à billes

Housing hardened and black oxidised. Contact faces ground. Note: Locating bushes are placed in a fixture or interchangeable subplate and form the counterpart to the locating cylinder. The locating bushes are centred in a reamed hole and then fastened with 4 screws. The balls of the locating cylinder engage in the groove in the locating bush, thereby forming a fast, secure and highly accurate changeover unit, and reducing setup and changeover times. Attention: Please observe installation notes of the locating bushes. Reference:03161-03 Material:Carbon steel

Polyethylene PEUHMW (ultrahigh molecular weight polyethylene). Glide rails for roller chains as defined in DIN ISO 606. These support and guide the roller chains on the return side, thus extending useful life by significantly reducing wear on the roller chains. They reduce vibrations and noise in the chain drive. These glide rails have high abrasion and wear resistance. They are maintenancefree, acidproof and have high chemical resistance. The additional C profiles are used for fastening to the system substructure and they protect the glide rails from lateral forces and torsion. Assembly The glide rails are pushed into the C profiles fastened to the system. The glide rails must be mounted so that the material is allowed to expand. A property of thermoplastic materials is that they expand or contract more than metals when there are temperature variations. Reference:22282-05 Version:Green Temperature range:-200 °C to +60 °C (briefly up to +80 °C)

Inner ring, outer ring and rolling elements, bearing steel. Cage sheet steel. Labyrinth seal sheet steel. Lip seal NBR. Version 2Z = sealed both sides with noncontact labyrinth seals. 2RSR = sealed both sides with contact lip seals. Note Deep groove ball bearings accept high radial and axial loads. Axial loads are absorbed in both directions. The versions 2Z and 2RSR are lubricated for life with a high quality grease. The main dimensions of the deep groove ball bearings conform to DIN 6251. Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. The radial internal clearance corresponds to the clearance CN acc. to DIN 6204. These tolerance classes are standard and well suited for most applications. Reference:23800 Temperature range:-30 °C to +110 °C

Broche traitée, bruni. Billes trempées, polies. Nota : Broche avec système de serrage rapide pour un gain de temps supplémentaire lors de l'équipement. Insérer la broche dans l'alésage et appuyer sur le bouton. Les trois billes sont ainsi chassées vers l'extérieur pour permettre le positionnement des composants. En tournant ensuite le bouton de commande d'un quart de tour à l'aide d'une clé à six pans, on obtient une tension ferme et sûre des composants. Référence:3153 Matière Broche:acier de traitement Matière Billes:acier à roulement

Locking pins are used for quick and easy fixating and joining of parts and workpieces. Shearing force double shear (F) = S · τ aB max. The locking pins with key ring represent a cost-effective alternative to other locking pins. Reference:03195

Ball lock pins are used for easy fastening or joining of components. The two balls are disengaged by pressing the push button and the pin can be slipped into holes in the workpieces. When the push button is released, the balls lock the connection securely. Shear force double shear (F) = S · τ aB max. The values given for the shear force are the theoretical breaking load. These are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been calculated in accordance with DIN 50141. Each user must determine individually whether the ball lock pin is suitable for the respective application. Different materials in which the ball lock pins are used, weather conditions and wear can influence the determined values. Reference:03420-10

Steel. Version: Ball thrust pins trivalent passivated. Ball seat and nuts electro zinc-plated. Note: Axial joint suitable for taking up tractive forces. The ball's movement can be controlled or fully locked in position using the clamping nut. Reference:27670

Corps en acier. Cage en plastique. Billes en acier. Les paliers linéaires à billes correspondent à la série 3 selon ISO 10285, avec joint d‘étanchéité des deux côtés. Les paliers linéaires à billes sont équipés d‘une cage en plastique. Cette cage garantit un fonctionnement silencieux et une qualité de roulement exceptionnelle. Avec bride pour un montage direct sur le corps. Les paliers linéaires à billes munis de joint d‘étanchéité des deux côtés doivent être graissés avant le montage. Les capacités de charge indiquées sont valables pour l‘utilisation d‘arbres trempés et rectifiés. Accessoires Arbres de guidage de précision 21595. Vis de fixation 07160. Référence:21518-01 Arbre:h6 Corps:H7 Plage de température:-20 °C jusqu’à +80 °C

Housing, stainless steel 1.4301. Bearing, stainless steel 1.4125. Seal, rubber NBR. Note Pillow block bearings consist of a sealed singlerow ball bearing with a spherical outer ring which is mounted in a housing. Because of the spherical outer surface of the bearing, shaft misalignment can be compensated for. The bearings are manufactured with a plus tolerance. This results in transition or press fits when using shafts with htolerances. The shaft is secured by grub screws on the inner ring. In normal applications, pillow block bearings are maintenancefree due to the lifetime lubrication. In difficult environmental conditions relubrication can be carried out over the grease nipple. All housing dimensions are nominal dimensions for which the usual casting tolerances must be taken into consideration. Reference:24240 Version:Bright Temperature range:-15 °C to +100 °C