Produse pentru masini (744)

Automatic double bending machine for bars up to Ø 50 mm (#14). It works automatically and bends any kind of shapes, positive and negative bends included. Version with automatic feeding and discharging units, which fold away (Optional) they allow the minimum distance of 980 mm between the two bending mandrels. Automatic system for bars feeding and discharging Ejection cylinder pneumatic ejector for shapes and mandrels to remove the tools from the toothed part the positions of the clamps and guides on the kick off arms and their adjustment are motorized and automatic Operation by means of digital electric servomotors 4 adjustable bending speeds Bending speed:72°/sec Average power consumption:2 kWh

Bidirectional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cuttosize bars using wires up to Ø 32 mm (#10). Driven by digital electric servomotors. Bar Wiser 32 bar shaping machine are equipped with Max. pulling speed 180 m/min (600 ft/min) 2 bending units (upper and lower) Clamp for extraction of the end part of the bar Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) Processed wire type:Bar Single strand:1 Ø 10÷32 mm (#10) Double strand:2 Ø 10÷22 mm (#7) Pulling speed:180 m/min (600 ft/min) Bending speed:450°/sec Average power consumption:3 kWh

non crea una complicata gestione di cespiti patrimoniali e non impatta né sul ricalcolo IRAP né sugli studi di settore si hanno costi certi per tutta la durata contrattuale con possibile opzione di acquisto a prezzo prestabilito ora per allora non si hanno “esposizioni bancarie” in quanto il rapporto è di tipo commerciale privato tra fornitore e cliente Potenza motore nastro:1,1kW Potenza gruppo aspirazione polvere:3kW Aspirazione necessaria:ca.3000 Potenza totale installata:ca.15kW

Elevatore a tazze, Coclee di recupero abrasivo, Selezionatore rigenera abrasivo, Quadro elettrico Industria 4.0. Modello:BOMB8 Matricola:192/18 Anno:2018 N° Turbine:8 Potenza motore Turbine:15kW Totale potenza installata:130kW Velocità avanzamento bombole:1.5-9m/min Produzione oraria:300 bombole

non crea una complicata gestione di cespiti patrimoniali e non impatta né sul ricalcolo IRAP né sugli studi di settore si hanno costi certi per tutta la durata contrattuale con possibile opzione di acquisto a prezzo prestabilito ora per allora non si hanno “esposizioni bancarie” in quanto il rapporto è di tipo commerciale privato tra fornitore e cliente Giri turbina:2900rpm Passaggio utile per introduzione pezzi:1200(l)x500(h) Potenza motore nastro:1,5kW Potenza gruppo aspirazione polvere:15kW Aspirazione necessaria:12000m³/h Potenza totale installata:ca.125kW

Rulliera motorizzata, coclee di recupero abrasivo, selezionatore rigenera abrasivo, filtro depolveratore a cartucce, quadro elettrico. Larghezza bocca ingresso:1700 mm Altezza bocca ingresso:1350 mm Interasse rulli:600mm Lunghezza minaima pezzi:2500 mm Tipo Turbina:CS 380D Diametro turbine:380 mm Potenza motore turbine:7.5 kW Potenza totale installata:56 kW

FILTRO a 36 MANICHE "BANFI FSN/6" matr.3129 anno 1983 - MACCHINE Maniche (sezione & numero):d.125x1900 n° 36 Superficie filtrante:27 m2 Portata:3500 m3/h

Automatic dual directional stirrup bender for the production of stirrups from straight bars (up to Ø 22 mm #7) or coils (up to Ø 16 mm #5). Driven by electric servomotors. Bar Wiser 22N Multifeed automatic stirrup benders are equipped with Max. pulling speed 100 m/min (330 ft/min) External and internal straightening unit Virtual mandrel Web Teleassistance Processed wire type:Bar/Coil Pulling speed:100 m/min (330 ft/min) Bending speed:685°/sec Average power consumption:2 kWh

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 32 mm (#10) Plate revolving speed 9 RPM Plate revolving speed:9 rpm Installed power:1.5 kW Machine's weight:290 kg (640 lb) Machine dimensions:76x81x86(h)cm (30"x32"x34"h)

Machine used to reinforce the polystyrene insert (EPS) of the Reinforced Thermal Block. The machine inserts automatically the vertical wires and their connectors into the polystyrene core.

FILTRO a 120 MANICHE "CS HF120" - MACCHINE Maniche (numero):d-125x2540 n° 120 Aspiratore tipo:MZ tipo.RM500/R2

Electromechanical automatic rebar cutting bench equipped with 2 side folding pockets. MobiPocket allows the unloading and lateral discharge of bars greatly reducing the clutter. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance. Cuts per minute:30 Pulling Speed:115 m/min (380 ft/min) Pulling Speed (Brushless):160 m/min (530 ft/min) Average power consumption:3 kWh

Rebar cutting machine with safety cutting system apt to process steel in bars. Cutting antirepetitiveness system. Capacity 1 bar Ø 36 mm (#11) 15 cuts per minute Cuts per minute:15 Installed power:9.2 kW Machine's weight:600 kg (1320 lb) Machine dimensions:157x60x90(h)cm (62"x24"x35"h)

POSSIBILITA’ DI NOLEGGIO OPERATIVO FINALIZZATO ALL’ACQUISTO (“RENT TO BUY”): non crea una complicata gestione di cespiti patrimoniali e non impatta né sul ricalcolo IRAP né sugli studi di settore si hanno costi certi per tutta la durata contrattuale con possibile opzione di acquisto a prezzo prestabilito ora per allora non si hanno “esposizioni bancarie” in quanto il rapporto è di tipo commerciale privato tra fornitore e cliente Diametro massimo grappolo:1500 mm Altezza massima grappolo:2000 mm Modello turbine:CS330 Portata massima ganci/paranchi:500 kg Numero turbine:3 Diametro turbine:330 Numero palette per turbina:6 Potenza motore turbine:5,5 kw

Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 25 mm (#8). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces. Processed wire type:Bar Single strand:1 Ø 8÷25 mm (#8) Double strand:2 Ø 8÷16 mm (#5) Pulling speed:120 m/min (400 ft/min) Bending speed:840°/sec Average power consumption:2 kWh

Camera di granigliatura con rivestimento antiabrasivo; Porta automatica; Turbine; Valvole erogazione abrasivo; Elevatore a tazze; Separatore pulizia abrasivo pneumatico; Quadro elettrico; Impianto elettrico a bordo macchina; Impianto pneumatico; Benna di carico; Cancelli di sicurezza; Barriera di fotocellule per carico benna. Modello:CS SBC600 Matricola:160/14 Anno:2014 Potenza motore turbina:7,5kW Quantità di graniglia lanciata per turbina:100÷120kg/min Diametro tamburo:1200 mm Larghezza tamburo:1200 mm Peso massimo singolo pezzo:100/150 kg Peso massimo di carico:2 Potenza motori turbina (Cad):7,5kW Volume massimo:600 dm³ Potenza elettrica installata:21.3kW Peso circa:5500kg Graniglia necessaria per la prima carica:600÷700kg

Automatic rebar bending machine for bars up to Ø 40 mm. It works automatically and bends any kind of shapes, positive and negative bends included. Automatic system for bars feeding and discharging 2 adjustable bending speeds Bending speed:35-40°/sec Average power consumption:1.5 kWh

Electromechanical automatic mesh cutting and bending machine for the production of U, L, Zshaped mesh and sandwich panels. Mesh handling is guaranteed by clamps driven by electric servomotors. Max mesh width 1250 mm; Max mesh length 6000 mm.

Rebar cutting machine for fast bars cutting. Cutting antirepetitiveness system. Capacity 1 bar Ø 45 mm (#14) 50 cuts/minute Cuts per minute:50 Installed power:4 kW Machine's weight:850 kg (1874 lb) Machine dimensions:130x69x110(h)cm (51"x27"x43"h)

Camera di granigliatura rivestimento antiabrasivo, Porta manuale, Turbine, Valvole erogazione abrasivo, Elevatore a tazze, Separatore pneumatico, Quadro elettrico, Impianto elettrico a bordo macchina, Impianto pneumatico. Matricola:2306 Potenza motore turbina:7,5kW Graniglia lanciata per turbina:100 kg/min Diametro tavola:2300 mm Altezza massima pezzi:1000 mm Velocità rotazione tavola:0.76rpm Portata tavola:1000 kg Potenza totale installata:20 kW Peso circa:3800kg

POSSIBILITA’ DI NOLEGGIO OPERATIVO FINALIZZATO ALL’ACQUISTO (“RENT TO BUY”): non crea una complicata gestione di cespiti patrimoniali e non impatta né sul ricalcolo IRAP né sugli studi di settore si hanno costi certi per tutta la durata contrattuale con possibile opzione di acquisto a prezzo prestabilito ora per allora non si hanno “esposizioni bancarie” in quanto il rapporto è di tipo commerciale privato tra fornitore e cliente Diametro massimo grappolo:1100 mm Altezza massima grappolo:1600 mm Modello turbine:SG360 Portata massima ganci/paranchi:1000 kg Numero turbine:3 Diametro turbine:360 Numero palette per turbina:6 Potenza motore turbine:5,5 kw

Mesh Spider is the lifting equipment to move electrowelded mesh panels which, thanks to its innovative patented hiding guns, can hook mesh bundles from the inside. Due to its automatic hooking and releasing device Mesh Spider can move one or more mesh bundles in a fast and safe way resulting in room saving as the bundles can be stocked one next to the other. Thanks to its reduced dimensions, it can be used with both a crane or a forklift. Available version MESH SPIDER 46 m INT it is able to hook from the inside mesh bundles with 3 picking points. Max. lifting weight:6000 kg (13200 lb) Mesh length:4÷6m (13'÷20') Mesh bundle height:150÷700 mm (8"÷28") Min. Cross wires distance:150x150 mm (6"x6") Picking points:3

Bidirectional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cuttosize bars using wires up to Ø 28 mm (#8). Driven by digital electric servomotors. Bar Wiser 28 bar shaping machine is equipped with Max. pulling speed 180 m/min (600 ft/min) 2 bending units (upper and lower) Clamp for extraction of the end part of the bar Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) Bar Wiser 28 Pack 0 Storage rack pneumatically operated. Processed wire type:Bar Single strand:1 Ø 8÷28 mm (#8) Double strand:2 Ø 8÷20 mm (#6) Pulling speed:180 m/min (600 ft/min) Bending speed:574°/sec Average power consumption:3 kWh

Automatic bar bending machine for the production of shapes with positive bends (“L”, “C” and double “C”), up to Ø 40 mm (#11). Device for the production of "bottlenecks“. Automatic system for bars feeding and discharging. Bending speed:35-54°/sec Average power consumption:1 kWh

Stirrup bender and bar shaping machine from coil with disk bending system for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 16 mm (#5). Driven by electric servomotors. This automatic shaping and stirrup bender from coil is equipped with Max. pulling speed 140 m/min (460 ft/min) HS Version 200 m/min (660 ft/min); Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick; Disk bending unit; Cutting with Brushless motors; Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades; Web Teleassistance. The 'bridge' version (Opera 16 Bridge) is suitable for accepting an optional mobile carriage which allows collecting and classifying the manufactured stirrups and rebars. Processed wire type:Coil Single strand:1 Ø 6÷16 mm (#5) Double strand:2 Ø 6÷13 mm (#4) Pulling speed:140 m/min (460 ft/min) Bending speed:1900°/sec Average power consumption:9 kWh

non crea una complicata gestione di cespiti patrimoniali e non impatta né sul ricalcolo IRAP né sugli studi di settore si hanno costi certi per tutta la durata contrattuale con possibile opzione di acquisto a prezzo prestabilito ora per allora non si hanno “esposizioni bancarie” in quanto il rapporto è di tipo commerciale privato tra fornitore e cliente Diametro massimo grappolo:1000 mm Altezza massima grappolo:2000 mm Modello turbine:SG360 Portata massima ganci/paranchi:1000 kg Numero turbine:3 Diametro turbine:360 Numero palette per turbina:6 Potenza motore turbine:11 kw

Mesh Spider is the lifting equipment to move electrowelded mesh panels which can hook mesh bundles from the outside. Due to its automatic hooking and releasing device Mesh Spider can move one or more mesh bundles in a fast and safe way resulting in room saving as the bundles can be stocked one next to the other. Thanks to its reduced dimensions, it can be used with both a crane or a forklift. Available version MESH SPIDER 46 m EST it is able to hook from the outside mesh bundles with 3 picking points. Max. lifting weight:6000 kg (13200 lb) Mesh length:4÷6m (13'÷20') Mesh bundle height:150÷700 mm (8"÷28") Picking points:3

Electromechanical automatic rebar cutting bench with 6 transfer roller conveyors. The cutting bench 'BAT 6' represents the ideal solution for those working large numbers of smallsized orders and it is especially designed for civil housing. Thanks to 6 different chambers optimise processing of small orders even without the transfer unit. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance. Cuts per minute:30 Pulling Speed:115 m/min (380 ft/min) Pulling Speed (Brushless):160 m/min (530 ft/min) Average power consumption:3 kWh

Fast automatic wire straightening and cutting machine, with rollers, for the production of cuttosize wires up to Ø 16 mm (#5). Driven by digital electric servomotors. Max pulling speed 240 m/min (790 ft/min) Straighteners (horizontalvertical) with electronic setting Rollers for the extraction of the last part of the coil (Optional) Automatic 6inlets motorized wire change and insertion unit (Optional) Patented motorized horizontal wire change unit which allows to change the diameter and the coil in "Zero time" (Optional) Web Teleassistance Single strand:1Ø 8÷16 mm (#5) Double strand:2Ø 8÷13 mm (#4) (OPTIONAL) Pulling speed:up to 240 m/min (790 ft/min) Average power consumption:20 kWh

Caricatore pezzi Boldrin; Trasportatore scarico pezzi vibrante; Porta cassone ribaltabile automaticamente; Elevatore; Separatore pneumatico; Ciclone; Quadro elettrico con PLC e inverter di regolazione per turbine e azionamento tappeto; Filtro depolveratore a 6 cartucce ATEX Diametro tappeto continuo:400 mm Larghezza tappeto continuo:1000 mm Peso massimo singolo pezzo:8 kg Potenza installata:34kW Modello turbine:SG 350 Diametro turbine:350 mm Potenza motore turbine:11 kW Velocità di lancio abrasivo:80 m/sec Prima carica abrasivo:1000 kg