Produse pentru masini (145)

Technical Data Dimensions (mm): L250xD370xH190 VOLTS: 220 WATTS: 1500 Consumption hour 0.7 Kw Production 3 pcs. in about 2 minutes

At Officina Meccanica Ornago, we carry out high-precision mechanical work to make parts and produce technology for the packaging industry. Each machined component is subjected to accurate and dimensional checks, so that we can always ensure high quality and high precision.

The FM70 is the wrapping machine capable of wrapping multilayer bundles. The versatility of the machine and the high quality standards make it suitable to be connected to our cartoning machines. MIN (mm) MAX (mm) A 20 60 B 20 160 C 50 250

This machine has been expressly designed to provide a sandblasting/shotpeening machine with reduced dimensions and costs for the treatment of small parts in contained quantity. This machine has very reduced dimensions and has been designed to be rested on a bench suitable for working even sat at a table. The working jet is obtained with the so-called "suction pressure" system. The machine is equipped with: • Centrifugal aspirator with 220 Volt single-phase feeding. • Filtering bag to collect the working powders. As an alternative, cartridge filter in compliance with EC regulations. • Dehumidifier for compressed air. • Pressure regulator with pressure gauge. • Sandblasting/shot-peening gun with trigger control and tungsten carbide nozzle (widia). • Parts blow gun. • Window with laminated glass. • Booth lamp, assembled inside the cap, externally to the working area. • Anti-abrasion gloves with integrated sleeve. • Left-hand side door. • Rest surface made of punched plate.

General features This category of machines is designed for binding small and medium-size packs with a single tight turn of 3 or 4-mm annealed wire. This hydraulic version of the LFF binding machine has been designed for application in a set of two or more units for wrapping sub bundles. The machine is configured on the basis of the production environment where it will be inserted, using customised solutions. As an alternative to the full standard structure, the machine can be provided with fixing plates to enable assembly in a fixed position or on runways and support frames, depending on customer requirements. Optional standard wire basket (coil wire dispenser) hydraulic bundle tightener (improves bundle shape) pneumatic knot press (presses the binding knot adapting it to the bundle) motorised carriage for forwards/backwards extraction (simplifies off-line maintenance) motorised carriage for side movement (enables binding span to be varied on modified or non-standard productions)

I componenti personalizzati in ottone stampati a caldo e lavorati con macchine transfer CNC rappresentano l'apice della precisione e della personalizzazione nel settore industriale. Questi componenti sono progettati per soddisfare le specifiche esigenze dei clienti, offrendo una combinazione di resistenza, durata e precisione. Grazie all'uso di macchine transfer CNC avanzate, ogni componente è realizzato con una precisione millimetrica, garantendo un adattamento perfetto e prestazioni ottimali in qualsiasi applicazione industriale. La possibilità di personalizzare questi componenti secondo il disegno del cliente li rende una scelta ideale per settori che richiedono soluzioni su misura e di alta qualità. La lavorazione con macchine transfer CNC non solo assicura un'elevata precisione, ma consente anche una produzione efficiente e rapida, riducendo i tempi di consegna e migliorando la produttività complessiva. Inoltre, l'uso di leghe di ottone, comprese quelle senza piombo, rende questi componenti ecologici e sicuri per l'ambiente. Le proprietà anticorrosive dell'ottone garantiscono una lunga durata, anche in condizioni operative difficili. Scegliere componenti personalizzati in ottone stampati a caldo e lavorati con macchine transfer CNC significa investire in qualità, affidabilità e innovazione per le proprie applicazioni industriali.

2 compact AUTOMATIC 565x577x520 6,0 L 47 Kg 2500 W 220-240 Vac 1N 50-60 Hz Automatic coffee and hot water portion control Bodywork all stainless steel, possibility of painted side panel (black / white / red) Stainless steel steam and water wands Coffee pre-infusion system and thermosiphon system Copper boiler (Cu 99.5) with anti-oxidation treatment The drip tray can be set on two different levels t

Si 25 lt. Detergente liquido concentrato a pH 9, ideale per il lavaggio di biancheria molto sporca. Grazie al suo pH neutro, non danneggia i tessuti e i colori, ma li rende più puliti e luminosi. Grazie ai suoi enzimi, è in grado di togliere lo sporco più pesante e resistente. È adatto per sporchi pesanti e per impianti automatici. Un detergente che ti garantisce una lavanderia impeccabile!

Innovazione e progresso Tecnologia costruita intorno alla ricerca Due sono i punti di forza che garantiscono l’elevato standard qualitativo di questo reparto di Meroni f.lli: da un lato, il personale, formato da persone esperte e appassionate, custodi di un vero tesoro di conoscenze accumulato in anni di operazioni, con un know-how altamente professionale che ha sempre permesso all’azienda di crescere; dall’altro, fiore all’occhiello di Meroni f.lli, è il parco macchine all’avanguardia, continuamente aggiornato e arricchito da investimenti importanti che mantengono l’azienda al vertice dell’innovazione nello stampaggio della lamiera e in tutti i processi di lavorazione correlati. Infatti in questo reparto è presente il taglio laser a fibra KW 2000,con caricatore automatico, piegatrici automatiche e punzonatrice.

Hai bisogno di lavorazioni meccaniche a Brescia e stai cercando un'azienda in grado di soddisfare tutte le tue richieste? Nella nostra sede a Nuvolento, i tecnici e gli esperti di Scaroni Domenico & C. forniscono assistenza e consulenza per diversi tipi di lavorazioni di carpenteria medio pesante, oltre a lavori specialistici come l’alesatura e la fresatura. Siamo specializzati in lavorazioni meccaniche a Brescia e in provincia e i nostri prodotti variano dalla fucinatura alla foratura dei metalli. Potete rivolgervi a noi anche per la fresatura CNC e per tutte le altre realizzazioni meccaniche. La nostra storia e i nostri clienti parlano per noi! Forniamo il meglio, garantendo assoluta efficienza e affidabilità.

ART. 4101 CERNIERE PIANE IN OTTONE FRESATO IN ORO SATINATO Confezione:24 Dimensioni (mm):60 x 50 x 2

E’ possibile realizzare palettature di ogni forma e tipo, inserendo punzonature simultanee e tranciatura di testa del tubo. Lo studio, i calcoli dimensionali della struttura e l’utilizzo di materiali di prima qualità, permettono di realizzare unità adatte a resistere agli sforzi richiesti da questo tipo di operazione.

La polpa da pizza Fiammante da 2500 grammi è un prodotto di alta qualità, ideale per chi cerca ingredienti freschi e autentici per la propria cucina. Realizzata con pomodori italiani selezionati, offre un gusto ricco e naturale, perfetto per la preparazione di salse per pizza. La confezione da 6 pezzi è ideale per la vendita all'ingrosso, garantendo una scorta sufficiente per pizzerie e ristoranti. Con una lunga scadenza fino al 31/08/27, questa polpa da pizza è un prodotto affidabile e versatile, adatto a una vasta gamma di ricette. Perfetta per chi ama la cucina italiana, è un ingrediente essenziale per chi desidera portare il sapore della tradizione nella propria cucina. Facile da usare e pronta all'uso, è la scelta ideale per chi cerca qualità e convenienza. SCADENZA 31/08/2026 confezione da 6, confezioni 54 =1 pallet Minimo d'ordine : 15 pallets

The flexible joint mounted on the encoder shaft grants a very good coupling, without parallel and angular mis-alignment, and avoids overloads, which can damage the bushings life. Elap measuring wheels are fit for the use in touch with metal, steel profiles, varnished surfaces, plastic materials, paper, cardboard, wood, fabrics and leather; they offer an excellent resistance to oil, fuels, ozone and environmental agents.

Brushing is an operation complementary to mechanical descaling, as it allows us to remove any residual mill scale from wire. After breaking the mill scale with the descaling machine, high-speed rotating brushes will remove any residuals from the wire. OMF's winning idea was to combine high-speed spinning brushes with an orbital rotation around the wire. This ensures the wire is cleaned uniformly, without causing any abrasion or material removal. A filtration system, connected to the brushing machine, will then cool the head and filter the brushing dust.

Spesso i Clienti si rivolgono a LIMA per l’esecuzione di lavorazioni meccaniche in conto lavoro, contando su parametri quali l’esperienza decennale del nostro personale, il rigoroso rispetto dei termini di consegna, il livello di qualità produttiva, la conoscenza dettagliata del comportamento delle materie plastiche e l’ampia gamma di tecnologie a nostra disposizione Il reparto produttivo di LIMA può contare su macchinari di varie tipologie che permettono di far fronte alle più svariate richieste da parte dei Clienti in termini di dimensioni, rispetto delle tolleranze a disegno e complessità geometrica. LIMA si struttura in tre linee produttive ben distinte.

Macchina ideale formare prodotti tipo coppe, pancette, etc. Macchina ideale formare prodotti tipo coppe, pancette, etc. Carico automatico con nastro. Ricette memorizzabili con cicli di massaggio adattabili. Funzionamento elettropneumatico. Modello:PF 50CS Dimensioni camera insacco:600 mm Dimensioni:140 x 300 x 210 (H) cm Potenza installata Kw:1 KW

Treccia semicerata utilizata per tutte le macchine per cucire mocassini, suole piane e a scatola, guardoli. Il particolare intreccio e la ceratura ben calibrata garantiscono un'ottima scorrevolezza senza scivolamento del punto e residui di sporco nella cucitrice.La speciale confezione su bobine flangiate assicura, con uno svolgimento regolare, una cucitura priva di difetti tecnici od estetici derivati da torsioni.

Made with a white sheet metal body, the control unit is used to control the 24 V devices positioned on the machine. Powered by 230 V alternating current, it is able to switch 24 V current to DC. The control unit is equipped with backup batteries inside that guarantee operation even in the event of a mains power failure.

Rectangular Waffle Maker Machine (Production of 2 pcs. in about 2 minutes) Technical Data Dimensions: L255xD410xH230 VOLTS: 200 WATTS: 1500 Hourly Consumption: 0.7 KW Weight: 10 KG It is available in double or triple mode upon request .

The CP02 is a versatile and compact case packer designed to insert single cartons and bundles into cases MIN (mm) MAX (mm) A 600 150 B 130 400 C 100 400

The MB60 is a small and compact wrapping machine designed to overwrap a single carton. MIN (mm) MAX (mm) A 120 25 B 15 90 C 50 250

Electric Manual Crêpès Machine Mod. C40-D Technical Data Dimensions: L850xD420xH160 VOLTS: 380/3/N WATTS: 5600 Weight: 26 KG Cast iron plates

The Box90 is an intermittent motion horizontal cartoner suitable for use in medium to high volume production lines. The Box90 is equipped with numerous accessories, including loading systems for different products such as tubes, bottles, jars, blisters, lipsticks, pencils, etc.setti, blister, etc.

-Single Machine (Prod. 60pcs/hour) Technical Data Dimensions: L255xD410xH230 VOLTS: 230 WATTS: 1500 -Double Machine (Prod. 120pcs/hour) Technical Data Dimensions: L560xD410xH230 VOLTS: 230 WATTS: 3000 -Triple Machine (Prod. 180pcs/hour) Technical Data Dimensions: L820xD410xH230 VOLTS: 400 WATTS: 3500

General features This category of machines is designed to wrap medium-size coils up to a height of 1.8 m, which are pressed first of all to make them less bulky, and then fastened using a traditional knot positioned on top of the reel. In this horizontal version, the coils must be moved using motorised C-hooks within the machine where they are pressed and bound with traditional knots using 4 binding heads. Once the cycle is complete, the coil is released and moved via the automatic conveyor system. When plants do not require a high-speed production cycle, the machine can also be equipped with just 2 binding heads with a 90° coil rotation system, with the application of the 4 binding steps in 2 time periods. The structure of the coil press consists of several units constructed with sturdy electro-welded steel sheets. All structural welds undergo thermal stress relief treatment and are then sandblasted to make the surface suitable for painting. The carriages travel along runners made of special steel on wheels with bearings. All mechanical components in contact with the binding wire are made of special hard-wearing steel and undergo thermal treatment suited to their use. The various features operate via hydraulic actuators, which are controlled by electronic valves and a hydraulic unit. The electrical and electronic control and management devices are made with components from leading international manufacturers to ensure maximum product reliability.

This category of machines is designed for binding large bundles of round bars in a fixed position with a single tight turn, double tight turn and double loose turn of wire rod. The machine base and structure are made of electro-welded structural steelwork and its compact shape makes it vibration-free. The carriage travels along runners made of special steel on wheels with bearings, and the various units operate via hydraulic actuators controlled by electronic valves and a hydraulic unit. The electrical, electronic and hydraulic components used to construct the binding machines come from leading international manufacturers. Optional standard wire basket (coil wire dispenser) motorised wire basket (coil wire dispenser with motorised wire rod recovery system) hydraulic bundle tightener (improves bundle shape) pneumatic knot press (presses the binding knot adapting it to the bundle) motorised carriage for forwards/backwards extraction (simplifies off-line maintenance)

General features The PGT-B bending machine is designed to bend large 2-tonne bundles in one work cycle along with the LQTE-Y-DG binding machine, which positions two bindings at the ends of the bundle once it has been bent. A gear motor moves the bending arm which, when lined up with runner tracks, processes the bundle with a 180° closure operation. Once bending has been completed, a clamping lever on the bundle enables the bending arm to be re-opened and at the same time the LQTE-Y-DG binding cycle commences. In this setup the system keeps production times to a minimum, which are approximately 23 seconds. The electrical, electronic and hydraulic components used to construct the machines come from leading international manufacturers.

General features This category of machines is designed for binding large bundles of round bars in a fixed position with a single tight turn of wire rod. The machine base and structure are made of electro-welded structural steelwork and its compact shape makes it vibration-free. The carriage travels along runners made of special steel on wheels with bearings, and the various units operate via hydraulic actuators controlled by electronic valves and a hydraulic unit. The electrical, electronic and hydraulic components used to construct the binding machines come from leading international manufacturers. Optional standard wire basket (coil wire dispenser) motorised wire basket (coil wire dispenser with motorised wire rod recovery system) hydraulic bundle tightener (improves bundle shape) pneumatic knot press (presses the binding knot adapting it to the bundle) motorised carriage for forwards/backwards extraction (simplifies off-line maintenance) motorised carriage for side movement (enables binding span to be varied on modified or non-standard productions)

General features The PGT bending machine and the LFP binding machine can be used together as required in a fully automated production cycle to bend and fasten bundles of round bars (with a maximum weight of 300 kg). The PGT bending machine receives the molten bars that will form the bundle for the rolling plant and clamps the material using a hook fixed on a chain operated by a gear motor. After conveyor operations, four levers controlled by cylinders implement the final bending operation. The LFP binding machine has three wire-guide which take the bundle from the bending machine, and two binding heads which bind the ends of the bent bundle when being moved towards the unloading position. A hydraulic unit provides the power to operate the hydraulic actuators for the binding cycle and movement is controlled by two gear motors. The machine cycle is fully automatic and managed by the PLC. The bundle unloading positions have special collection containers or systems for shaping and moving the master bundle. The electrical, electronic and hydraulic components used to construct the machines come from leading international manufacturers.