Produse pentru masini (727)

IDEA assembles cages by means of the patented 'Schnell System' (Patented). Using three thin longitudinal wires ,which may be welded to any point of the stirrup's exterior surface IDEA cage assembling machine is able to halfassemble lattice girders of stirrups of any shape and size. The halfassembled girder is now ready to be finished off by fixing the frame carrying bars. As the stirrups have already been welded at the correct distance, the carrying bars may be only tied every 5 or 6 stirrups. This means saving up to 60% on assembling costs; maximum flexibility girders may be assembled with stirrups of any shape and size; besides this system avoids all size restrictions and material waste involved with the use of electrowelded mesh; high quality standards the girders obtained with this system are far more precise and stiff than their traditional counterparts and they do not face any risk during transport. Minimum stirrup:150x150 mm (6"x6") Maximum stirrup:1500x1500 mm (5'x5') Wire Ø:6÷16 mm (#3÷#5) Pulling Speed:45 m/min (150 ft/min) Average power consumption:8 kWh

FILTRO a 6 CARTUCCE "CS CF6" - MACCHINE Superficie filtrante:60 m² Poortata aspiratore:3000 m³/ora N. di cartucce installate:06 Diametro cartuccia:325 mm Altezza cartuccia:600 mm

Stirrup bender and bar shaping machine from coil with disk bending system for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 14 mm (#4). Driven by electric servomotors. This automatic shaping and stirrup bender from coil is equipped with Max. pulling speed 150 m/min (500 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick Disk bending unit Cutting with Brushless motors Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance Processed wire type:Coil Single strand:1 Ø 6÷14 mm (#4) Double strand:2 Ø 6÷10 mm (#3) Pulling speed:150 m/min (500 ft/min) Bending speed:2345°/sec Average power consumption:4 kWh

Elevatore a tazze, coclee di recupero abrasivo, selezionatore rigenera abrasivo, filtro depolveratore, quadro elettrico. Max diametro bombola:400 mm Max altezza bombola:1250 mm Numero turbine:3 Diametro turbine:330 mm Potenza motore turbine:7.5 kW Potenza totale installata:26.85 kW

The rotor type wire straightening machine RI 6 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 2,5mm to Ø 6mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market

Automatic plant for the production of calendered bars from Ø 12mm to Ø 40mm. The bars are automatically selected, positioned, transferred to the calendering machine, calendered and then unloaded without the need for operator intervention. The calendering center COMPASS 40 guarantees the insertion of the bars always oriented in the same way; automatic control of the bending radius; an automatic manufacturing process; greater safety for the operator. COMPASS 40 can operate in 3 ways Automatic with single bar it allows automatic feeding of the bar and electronic check of the produced bar bending radius; Automatic with multiple bars it allows the automatic feeding of the bars without checking the bending radius; Manual with the same features of a CER40 calendering machine. Bars calendering is mainly used in the construction of foundations for wind turbines or tunnels (those not made with prefabricated elements). Plate revolving speed:13-42 rpm Calendering wheel height:80 mm (4 Ø 20 mm) Min. calendering radius:2000 mm

Machine to cut (EPS) polystyrene blocks in sheets, useful for the production of precast sandwich panels. The machine cuts the blocks horizontally and vertically and obtains polystyrene sheets of different thicknesses and shapes.

FILTRO a 30 MANICHE OMSG FA 30-1 - MACCHINE Numero maniche:30 Aspiratore tipo:Vebair tipo VBR500 Portata m3/h:9000

The Combidrive MO is a cold rolling line with single horizontal drawing capstan for the production of smooth and ribbed wires in bars from Ø 4 to Ø 12 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Wire is rolled to reduce the section and if necessary ribbed, then straightened and cut according to the different lengths scheduled. Rotating cut system to ensure continuous production Max. pulling speed (straight bars production) 6 m/s Max. pulling speed (coil production) 8 m/s Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s) Number of pitches:2 Maximum speed:8 m/s Out wire Ø:4÷12 mm

Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 22 mm (#7). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces. Processed wire type:Coil Straightening capacity:1 Ø 8÷22 mm (#7) Bending capacity:2 Ø 8÷16 mm (#5) Pulling speed:120 m/min (400 ft/min) Bending speed:840°/sec Average power consumption:2 kWh

Camera di granigliatura con rivestimento antiabrasivo; Porta manuale; Turbine; Valvole erogazione abrasivo; Elevatore a tazze; Selezionatore pulizia abrasivo pneumatico; Tubazioni di collegamento macchina/filtro; Quadro elettrico; Impianto elettrico a bordo macchina; Impianto pneumatico; Filtro depolveratore a cartucce; N° turbine:2 Tipo turbina:CSS1 Massimo diametro grappolo:800mm Massima altezza grappolo:1000mm N° ganci:2 Portata gancio:250 kg Aspirazione necessaria:2500÷3000m3/h Potenza totale installata:9,2 kW Produzione oraria:6-12 grappoli/ora

Cage making machine for the production of cylindrical cages with variable pitch welded spiral wrap; max cage Ø 2500 mm. High productivity and flexibility is guaranteed by the configuration of the machine and by the fully automatic welding unit SAF 3000. WIth the machine to produce cylindrical poles CM PRO 2500 it is also possible to produce on the machine square or rectangular cages and cages with the bars bent on the end (90 °bends, bottle necks and pointed).

COSER CS HM 1100x2000/3T - MACCHINE Diametro massimo grappolo:1100 mm Altezza massima grappolo:2000 mm Portata massima ganci/paranchi:500 kg Diametro turbine:330 Potenza motore turbine:7,5 kw Tipologia separatore:Pneumatico

Automatic double bending machine for bars up to Ø 50 mm (#14). It works automatically and bends any kind of shapes, positive and negative bends included. Version with automatic feeding and discharging units, which fold away (Optional) they allow the minimum distance of 980 mm between the two bending mandrels. Automatic system for bars feeding and discharging Ejection cylinder pneumatic ejector for shapes and mandrels to remove the tools from the toothed part the positions of the clamps and guides on the kick off arms and their adjustment are motorized and automatic Operation by means of digital electric servomotors 4 adjustable bending speeds Bending speed:72°/sec Average power consumption:2 kWh

Bidirectional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cuttosize bars using wires up to Ø 32 mm (#10). Driven by digital electric servomotors. Bar Wiser 32 bar shaping machine are equipped with Max. pulling speed 180 m/min (600 ft/min) 2 bending units (upper and lower) Clamp for extraction of the end part of the bar Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) Processed wire type:Bar Single strand:1 Ø 10÷32 mm (#10) Double strand:2 Ø 10÷22 mm (#7) Pulling speed:180 m/min (600 ft/min) Bending speed:450°/sec Average power consumption:3 kWh

non crea una complicata gestione di cespiti patrimoniali e non impatta né sul ricalcolo IRAP né sugli studi di settore si hanno costi certi per tutta la durata contrattuale con possibile opzione di acquisto a prezzo prestabilito ora per allora non si hanno “esposizioni bancarie” in quanto il rapporto è di tipo commerciale privato tra fornitore e cliente Potenza motore nastro:1,1kW Potenza gruppo aspirazione polvere:3kW Aspirazione necessaria:ca.3000 Potenza totale installata:ca.15kW

Elevatore a tazze, Coclee di recupero abrasivo, Selezionatore rigenera abrasivo, Quadro elettrico Industria 4.0. Modello:BOMB8 Matricola:192/18 Anno:2018 N° Turbine:8 Potenza motore Turbine:15kW Totale potenza installata:130kW Velocità avanzamento bombole:1.5-9m/min Produzione oraria:300 bombole

non crea una complicata gestione di cespiti patrimoniali e non impatta né sul ricalcolo IRAP né sugli studi di settore si hanno costi certi per tutta la durata contrattuale con possibile opzione di acquisto a prezzo prestabilito ora per allora non si hanno “esposizioni bancarie” in quanto il rapporto è di tipo commerciale privato tra fornitore e cliente Giri turbina:2900rpm Passaggio utile per introduzione pezzi:1200(l)x500(h) Potenza motore nastro:1,5kW Potenza gruppo aspirazione polvere:15kW Aspirazione necessaria:12000m³/h Potenza totale installata:ca.125kW

Rulliera motorizzata, coclee di recupero abrasivo, selezionatore rigenera abrasivo, filtro depolveratore a cartucce, quadro elettrico. Larghezza bocca ingresso:1700 mm Altezza bocca ingresso:1350 mm Interasse rulli:600mm Lunghezza minaima pezzi:2500 mm Tipo Turbina:CS 380D Diametro turbine:380 mm Potenza motore turbine:7.5 kW Potenza totale installata:56 kW

FILTRO a 36 MANICHE "BANFI FSN/6" matr.3129 anno 1983 - MACCHINE Maniche (sezione & numero):d.125x1900 n° 36 Superficie filtrante:27 m2 Portata:3500 m3/h

Automatic dual directional stirrup bender for the production of stirrups from straight bars (up to Ø 22 mm #7) or coils (up to Ø 16 mm #5). Driven by electric servomotors. Bar Wiser 22N Multifeed automatic stirrup benders are equipped with Max. pulling speed 100 m/min (330 ft/min) External and internal straightening unit Virtual mandrel Web Teleassistance Processed wire type:Bar/Coil Pulling speed:100 m/min (330 ft/min) Bending speed:685°/sec Average power consumption:2 kWh

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 32 mm (#10) Plate revolving speed 9 RPM Plate revolving speed:9 rpm Installed power:1.5 kW Machine's weight:290 kg (640 lb) Machine dimensions:76x81x86(h)cm (30"x32"x34"h)

Machine used to reinforce the polystyrene insert (EPS) of the Reinforced Thermal Block. The machine inserts automatically the vertical wires and their connectors into the polystyrene core.

FILTRO a 120 MANICHE "CS HF120" - MACCHINE Maniche (numero):d-125x2540 n° 120 Aspiratore tipo:MZ tipo.RM500/R2

Electromechanical automatic rebar cutting bench equipped with 2 side folding pockets. MobiPocket allows the unloading and lateral discharge of bars greatly reducing the clutter. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance. Cuts per minute:30 Pulling Speed:115 m/min (380 ft/min) Pulling Speed (Brushless):160 m/min (530 ft/min) Average power consumption:3 kWh

Rebar cutting machine with safety cutting system apt to process steel in bars. Cutting antirepetitiveness system. Capacity 1 bar Ø 36 mm (#11) 15 cuts per minute Cuts per minute:15 Installed power:9.2 kW Machine's weight:600 kg (1320 lb) Machine dimensions:157x60x90(h)cm (62"x24"x35"h)

POSSIBILITA’ DI NOLEGGIO OPERATIVO FINALIZZATO ALL’ACQUISTO (“RENT TO BUY”): non crea una complicata gestione di cespiti patrimoniali e non impatta né sul ricalcolo IRAP né sugli studi di settore si hanno costi certi per tutta la durata contrattuale con possibile opzione di acquisto a prezzo prestabilito ora per allora non si hanno “esposizioni bancarie” in quanto il rapporto è di tipo commerciale privato tra fornitore e cliente Diametro massimo grappolo:1500 mm Altezza massima grappolo:2000 mm Modello turbine:CS330 Portata massima ganci/paranchi:500 kg Numero turbine:3 Diametro turbine:330 Numero palette per turbina:6 Potenza motore turbine:5,5 kw

Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 25 mm (#8). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces. Processed wire type:Bar Single strand:1 Ø 8÷25 mm (#8) Double strand:2 Ø 8÷16 mm (#5) Pulling speed:120 m/min (400 ft/min) Bending speed:840°/sec Average power consumption:2 kWh

Camera di granigliatura con rivestimento antiabrasivo; Porta automatica; Turbine; Valvole erogazione abrasivo; Elevatore a tazze; Separatore pulizia abrasivo pneumatico; Quadro elettrico; Impianto elettrico a bordo macchina; Impianto pneumatico; Benna di carico; Cancelli di sicurezza; Barriera di fotocellule per carico benna. Modello:CS SBC600 Matricola:160/14 Anno:2014 Potenza motore turbina:7,5kW Quantità di graniglia lanciata per turbina:100÷120kg/min Diametro tamburo:1200 mm Larghezza tamburo:1200 mm Peso massimo singolo pezzo:100/150 kg Peso massimo di carico:2 Potenza motori turbina (Cad):7,5kW Volume massimo:600 dm³ Potenza elettrica installata:21.3kW Peso circa:5500kg Graniglia necessaria per la prima carica:600÷700kg

Automatic rebar bending machine for bars up to Ø 40 mm. It works automatically and bends any kind of shapes, positive and negative bends included. Automatic system for bars feeding and discharging 2 adjustable bending speeds Bending speed:35-40°/sec Average power consumption:1.5 kWh