Produse pentru masini (203)

AILETTES POUR SOCS - MONOBLOC

Pistolet à arrêt manuel laiton nickelé Joint PTFE Orifice 1’’ F Débit 80 l/min ATEX:No GASKET:PTFE

DISQUES DE COVER-CROP - BOMBÉS CRÉNELÉS

Body: cast iron Mechanism: brass Waterproofing: graphite braid and Viton® flange O-ring, PTFE seal as an option (HL_-PTFE) NBR flange O-ring, Viton® or PTFE seal as an option ATEX:No MATERIALS:Cast-iron

Rigid spout without filter for metal jerrycans ATEX:No

PTFE seal Orifice: 1’’ Female BSP or 1’’ Male BSP Flow rate: 80 l/min ATEX:No GASKET:PTFE

BAGUES POUR DENTS DE FOURCHE - D’ADAPTATION - FILETÉES

DISQUES SPÉCIAUX

2” discharge kit for PE-A2: fire department fitting + 5 m of flat PVC Ø 50 hose + clamp ATEX:No

Body, flange, screw and shaft: stainless steel Couplings: stainless steel (nylon as an option with code -A) Membrane and valves: made of a hydrocarbon-resistant elastomer (perbunan) (Neoprene as an option with code -A) Lever: zinc-plated steel with a rubber handle, 1 metre in length Trolley-mounted pump with the CHAR version TECHNOLOGY:Membrane ATEX:No

Suction and discharge of nearly all corrosive chemical products: strong acids, solvents with high aromatic content, chlorinated or oxygenated solvents, aromatic hydrocarbons, etc. Electric properties: UPE pipe and conductive rubber coatings, R ≤ 1 MOhm/lg. ATEX:No

Gamme de métaux non ferreux et ferreux: Laiton Bronze Cuivre Alliage cuivreux Aciers étirés et lamines Titane Inox Aluminium ...

Special hydrocarbon PVC Nitrile hose reinforced with a rigid shockproof PVC spiral Smooth inner and outer surfaces High manoeuvrability characterised by its flexibility even at low temperatures ATEX:No

PIGNONS ET POULIES POUR CHAÎNES D'ÉPANDEURS

Trolley with vane pump Cartridge filter: 10 microns Suction and discharge kit: Oil: 10 to 500 cSt (mm2/s) Built-in and adjustable bypass Maximum suction lift: 5 metres Maximum temperature of the pumped liquid: 60°C Single-phase or three-phase motor Voltage: single-phase 230 (FiLTRO20, FiLTRO22) and three-phase 400 (FiLTRO21, FiLTRO23) Current: 4.6 (FiLTRO20), 2.2 (FiLTRO21), 7.8 (FiLTRO22), 5 (FiLTRO23) TECHNOLOGY:Vane ATEX:No

Plastic funnel with filter and straight stem STEM:Straight ATEX:No

Grease dispensing gun with an oval gear meter Pressure: 550 bars ORIFICE:1/4'' ATEX:No

NOIX POUR CHAÎNE MARINE D'ÉPANDEUR - À EMPREINTES

BAGUES POUR DENTS DE FOURCHE - D’ADAPTATION - PERCÉES

Level regulator with float INTENSITY:16 ATEX:No

DENTS DE HERSE - LOURDE

Déplacer des charges jusqu'à 100 tonnes (moules ou gros outillages) Charges et dimensions à la demande Précision et sécurité Large gamme

Once fixed to the outside of the tank, this device enables the detection of the lower (BO contact) and upper levels (NF contact). It is essential to verify that the chemical nature of the stored liquid is compatible with the immersed components of the level detector. INTENSITY:1 ATEX:No