Produse pentru masini (1001)

TFBGZ-400 is the pumpkin seeds shelling machine with seed shelling, sorting and shells removing. The processing materials have high commodity are ensured by systematic shelling procedures, screw transportation, efficient de-huller and vibration separating sieve assembly. The production begins with raw materials being fed in the dehuller and then shelled materials, the kernels separate from covers through vibration sieve, and remove broken kernels. Then the shells are removed using cyclone, seeds and kernel fall into second layer of sieve and continue to be screening, kernels come to finished kernel outlet, at same time, secondary shelling for unshelled seeds from procedures. The equipment can be used with the assembly line, increasing production capacity and reducing production costs effectively.

Npack built two types of pick and place capping machine, one is the linear types and another is rotary intermittent bottle capper. No matter which types, it containes two main parts, one is the automatic pick cap device, and another one is the capping station. the rotary one, bottle working on a star wheels, for different size of bottle need changeover the star wheel, the changeover no tools required, takes less than 5 mins, we adapt flexiable slot, just take off the wheels than replace another new one. The linear type is more flexiable, no need any changeover parts except the capping heads, speed is more efficient than the rotary one. small vial less 100ml rotory one is more suitable, linear type is mostly application for daily checmicals, Food industry. Both of the two pick capper driven by servo motor, torque is adjustable. PLC control and also emotion controller for option for a high speed non stop working. Yield of cap:99.9%

NP-WF Linear type Bottle Rinser by water is widely used for rinsing the new glass bottle and jars before filling. The rinsing can choose pure hot water or normal temperature purified water. The water after cleaning the bottles and recycling into the water tank for purify and heating again to reduce the water comsuption.The ultronic device is for option to meet the high requirement, Servo system bottle rinser Servo motor driven the bottle clamper to turn up 180 degree, the turning speed is frequency converter control. The rinse spary head are specially designed for different types of containers, ensure 100% rinsing the inside of the bottles. Rinsing head will insert into the container for cleaning. The machine is frequency speed control, change bottles no need additional changeover parts. A high pressure water pump and a water recyling pump ensure the rinse pressure and recyling water in time Capacity:0~50b/m according to bottle size Bottle diameter:Φ10～120 subject to samples Bottle height:40~460mm Voltage:AC 220V　50Hz Power:1500W Weight:600kg

Fully Automatic Tracking Capping Machine Emotion Control is designed base on inline pick and place capping machine, it solve the low capacity of the inline pick and place capping machine, its movement is control by Motion Controller more efficient and accuracy than PLC, the capping heads are moving tracing with the bottles going when capping. it can be equipped with one or two capping heads, capacity is from 40b/m to 70b/m without thinking the size of the bottle and cap (base on 100ml to 5000ml bottle). This machine has the advantage of bottle non-stop working, so after the filling machine, even almost full of liquid inside, the liquid will not splash out when capping. It applies high efficient servo system, including the belt servo, horizontal moving servo, up and down moving servo, and servo capping head system Automatic gripping and capping are completed by the servo motor, and the movement is precise and the speed is fast. Capacity:50-55 bpm Cap diameter:15-120mm Bottle height:40-380mm Voltage:220VAC 50/60HZ Power:4000W Cap Sorter:Elevator storage around 1000 caps at a time Air Consumption:0.4-0.6MPA 0.5CBM

This fully automatic sleeve labeling machine is suitable for various kinds of bottles,like round bottles, square bottles,oval bottles,etc.This machine can automatically feed and cut film,and it can sleeve labels precisely,greatly saving labor and improving work efficiency.The machine can be widely used for beverage bottles,cosmetic bottles,shampoo bottles,etc. The touch screen control panel makes the working parameter is visual,the precise adjustment can be easily achieved according to operation Equipped with high quality electric eye,It can pull film automatically,it is more convenient and easier to operate the machine. The bottle separating component can help to separate bottle and adjust bottles distance,ensure the bottle can be labeled in order,improve the labeling effect. Rotary knobs are designed for adjusting the position of different mechanisms, make sure the machine can sleeve label precisely. Input Power:2.5KW Input voltage:∮3,380/220VAC Production Efficiengcy:Max150(Bottle/min) according to bottle and label size Size of Host Machine:L2100mm x W850mm x H2000mm Applicable Diameter of Bottle Body:Φ28mm-Φ125mm Applicable Length of Lable:30mm-250mm Applicable Thickness of Label:0.03mm-0.13mm Applicable Internal Diameter of Paper Tube:(Free Adjustment)

For some highly corrosive liquid products, this machine can adapt PTFE pump, PTFE hose and sealing material, so as to avoid the corrosive of the machine 2. The parts in contact with the liquid conform to the GMP standard. When filling, the filling head extends into the bottle and the bottle is sealed to ensure that the liquid does not foam and overflow, and the liquid level in the bottle is consistent. 3. The filling head has the function of sucking back, and there is no dripping phenomenon. The bottle is not in place and not filled, ensuring misoperation and keeping the work area clean. 4. This machine has only one filling pump, one top tank and one side stand tank which can be equipped with 2~20 filling heads, and the output and filling volume can be adjusted if need. More information: When filling, the filling head presses against Measurement precision:±0.5%-1% for 5L-1L Capacity:800b/h-7200b/h Voltage:220VAC 50/60hz Air pressure:4～6㎏/㎝² Air Consumption:1m³/min Power:1000w

The KT5-3000 sunflower seeds dehuller is our patented product with exclusive proprietary rights and has a higher market share of 80% of market share in China. The highest perfect keel rate and maximum yield capacity of sunflower and black oil sunflower seeds are ensured by systematic shelling assembly. The production begins with raw materials being fed in the dehuller and the procedures. vertical transportation. and efficient separating sieves shelled materials. The mixture consisting of keels, husks, and unshelled seeds is discharged to a suspended separator. At this stage, a cyclone sucks and then moves hulls. followed by the separation of hulled keels and unhulled seeds with vibrating screens. The unshelled seeds will be returned to the dehuller. After passing all of the stages, the finished kernel is ready and deposited in the hopper. This product adopts a bucket elevator to transport raw materials, which can avoid blockages effectively. Perfect kernel rate *Half of whole kernel belong to broken kernel:≥96% The content of kernel & seed in the shell:Black&oil sunflower seeds:1500-2500 Output(kg/h):Black&oil sunflower seeds:1000-1750 The content of shell in the kernel:≤3% Dimension(L * W * H)/m:7*3.2*5.7 Weight(t):4.8 Power(kW):26.7 Voltage:Voltage

it is widely application for the container pasting with two front and back labels, it is one type of self adhesive labeling machine, single and double side labeling is option, using for round container, square and flat container, also carton, boxes ,ect. It is automatic controlled by PLC easy operating. It can change specifications easily. It adopts servo motor, achieved closed loop control low malfunction rate. High efficiency. Double sides labeler we also call it as front and back labeling machine, for it is pasting two labels front and back. Advantages: 1. PLC CONTROL, Automatically check the length of labels 2. Equipped with warning device of insufficient labels, broken labels 3. No bottle, no labeling 4. No labels, no labeling 5.Servo motor control, stable labeling Output Speed:0-200 bottle/min Hight Label Object:30-280mm(according to customer samples) Width Label object:20-200mm Label Hight:5-150mm Label length:25-300mm Pastes the sign precision:±1mm Roll inside:76mm Roll Outside Diameter:380mm Power supply:110/220V 1.5HP 50/60HZ Air compressor:5Kg/c㎡

Process: In feed bottle → pre-position →label cutting → gluing → labeling → label by press out → finish Hot melt OPP glue labeling machine is widely used for different material of container . The label cost is comparatively lower, it can meet the requirements of those users who have diverse kinds of the containers. It is the most economical models in cost to make mass production and intergrated operating. The equipment has massively used modularization design concept to make it easy and simple for users to change the bottles. Whether from the replacement of star wheel, guide plate or manual speed adjustment to automatic speed control, for example changing the label is only needed to change the program, the products concept of that the equipment is designed for users is embodied in everywhere. Suitable bottle volume:500ml-2000ml Bottle shape:Round bottle Bottle diameter:55mm-100mm Label exact:2mm Applicable material of label:PAPER, PP, BOPP, PVC, PE, ETC Applicable material of bottle:PE, PET, Glass bottle, POP Can Power:308 VOLTS, 3 PHASE, 50-60 HZ, 9 -12 KW Air Consumption:4Mpa Weight:1500 Kg Dimension of machine:L5000 × W1800 × H2000 mm

Reasonable Design: Designed with a high-quality filling head Easy to Operate: Add the filling material to the hopper, adjust the filling volume, then use the handle switch to control and finish the filling. Standard filling nozzles with OD4MM and OD8 mm, suitable for most of the products specification. Comfortable handle which helps improve user more easy operation The filling volume is adjustable by a mechnical screw, easier and faster Parameters The filling system is piston volumetric and are operated by manual ,efficiently accurate filling with high speed. Filling speed: 10-50 times/min Filling Volume: 5ml to 50ml Hopper capacity: 10L Net weight: 10KG 304SS construction Filling speed:10-50 times/min Filling volume:5ml to 50ml Hopper capacity:10L

it is applicable for round, square & flat bottle it is used in many industries, such as cosmetic, food and pharmaceutical. The caps are round with diameter 12mm-120mm 1. Suit to various bottles and round caps. 2. No need to change parts, easy operation and adjust, low maintenance. 1. Linear structure which is flexible to run different size bottles without change parts. 2. Cap feeding system will be made according to cap sample( by vibrating bowl or cap elevator). Designed with auto cap-feeding, the top belt does online continuous cap pressing, meeting various high-speed cap pressing production requirement. 3. PLC control system and touch screen is available for your option. 4. Mainly made of SUS304 including frame & body, continuous working & highly automation ensuring highly efficiency. Model:NP-PC Applied bottle range:100ml-1000ml 1000ml-5000ml Applied cap size:Dia: 12-120mm Yield of capping:>99% Power supply:220V 50HZ Power consumption:<2KW Air pressure:0.4-0.6Mpa Weight:850kg Dimension(L*W*H):2000x1100x1800(mm)

An automatic detergent piston filling machine is a piece of equipment that is used to fill detergent products into bottles or containers. This machine operates by using a piston that pulls the product from a holding tank and then dispenses it into the containers. The process is automated, which means that the machine can fill a large number of containers quickly and efficiently. Feature: Nozzles Servo Piston VolumetricFilling Machine Filling Range: 0.5L- 5L adjustable on touch screen. Bottle Mouth: according to samples Driven and controlled system: Double Panasonic servo motor, one servo motor driven 6 pistons, TBI high precision screw lead, high precision piston. Accuracy: <+/-0.5% Capacity: 3000BPH for 2L Hopper: automatic liquid feeding system Container: suitable for 0.5-2L Plastic bottles Voltage: 220VAC 50/60Hz Power: 2000W Drop-proof filling nozzles: adapting vacuum sucking nozzles. Touch Screen Language: English and Chinese Output::20-120 bottles/min Numbers of Filling nozzles:2 to 20 nozzles Filling Accuracy:0.5% Power supply:220V 50/60Hz;110V,50/60hz Power:1.5KW to 3KW Dimension (L W H):3000mm*1100mm*1900mm with dust cover Weight:1000kg

Makinenin temel amacı; Ayçiçeği veya yağlık ayçiçeği tohumu (çekirdeği) için kabuk ile iç kısmın ayrıştırıl-ması için kullanılır. Yüksek verimli ve yüksek tonajlı bir makinedir. Makinenin çalışma prensibi; Çekirdekler (tohumlar) kabuklarından ayrıştırılmak için elevatör yardımı ile değir-menlere dökülür. Değirmenlerde kabukları kırılan ürünler eleme sistemine dökülür. Eleme sistemine aktarılırken aspratör yardımı ile kabuklar siglona çekirilir. Yatay eleme sistemine aktarılan ürün tırnak sistemli elekler yardımı ile iç kısımlar ve kabuklar ayrıştırılır. Yan kanallardan kalan kabuklar alınırken ön tarafa iç kısımlar çıkar. İç çıkarma ve kabuk ayırma işleminde yüksek tonaj ve yüksek verime sahip bir makinedir. Makinenin teknik özellikleri; Toplam 4 kırma değirmeni ve 4 eleme alanına sahiptir. Makinenin kapladığı alan 700x320x570 cm dir. Toplam motor gücü 26.7 kw dır. 380 volt ile çalışmaktadır.

Npack adapt cap elevator to sort the caps to the automatic bottle capper, lowest noize, and the elevator hopper can stroage around 1000 caps at a time.

The inline piston liquid filling machine is more flexiable, and suitable for a wide range of container size range from 100ml to 5000ml.It is has advantage of high filling speed, high accuracy and easy adjustment for different types of containers. Application It is application for any viscous liquid to thin liquid which is non corrosive the stanless steel, Piston filling machines are commonly used in industries such as food and beverage, pharmaceuticals, and cosmetics, where precise and consistent dosing is important. They can handle a wide range of products with varying viscosities, from thin liquids to pastes and creams Speed:20-120bottles/min Filling range:100-1000ml,350-2500ml,500-5000ml Measurement precision:±0.5% depends on the liquid Air pressure:6～8㎏/㎝² Power rate:1.5KW to 3KW for the main servo motor Net Weight:600Kg to 1000KG

The ROPP capper is the automatic capping machine which is designed to tighten pilfer proof cap for wine bottles, olive oil bottles, drinks bottles etc. It is suitable for φ12-55mm bottle caps (Equipment can be customized according to lid diameter). The automatic operation helps you save labor and reduce production error. The capping machine is a suitable equipment for roll-press-sealing the aluminum caps for the plastic bottle, pet bottle, as well as glass bottle. It processes the screw-press capping for the bottle under the rolling press from hobs, automatically feeding bottle, caps, removing the reverse caps. The capped bottle favors the characteristics like the stable capping effect, convenient uncapping, so that it function as conterfeit and anti-theft. Capacity:1500 b/h Suitable cap :metal ROPP cap Yield of cap :99% Power Consumption :0.8KW Dimension:2000x1000x1500mm Weight(kg) :350kgs

The Automatic pick and place capping machine is designed and manufactured by shanghai npack automation Equipment co.,ltd, solving the cap feeding problems and increasing the capper working efficient.The cap pick device can be driven by servo motor or a cam splitter for Synchronize working with the filling and capping. It is an ideal bottle capper for the caps which is specially and can not directly feeding on the bottles,such as the Anti-theft caps,Child Proof Caps,Sports Caps/Push-Pull Cap,Spray Caps,Pump caps etc.The whole machine was made with 304SS with dust cover, safety door, one or two capping heads are for optional, the two capping heads max speed can reach 80b/m. For different types of caps, the cap sorting device will be diffirent, we have the vibertor, centrifugal disc and elevator sorting feeder. And the bottle capper equiped with a cap storage hopper elevator for storage caps for long time working,standard one is around 0.5 cubic meters. Capacity:1800-2400b/h or 3600-4200b/h Suitable cap:Screw cap or snap cap Yield of cap:99% Capping head:1 head or 2 head Power consumption:2KW/3KW

The Vibration Impurity Separator is mainly used for sunflower seed & kernel, pumpkin seed & kernel and other finished materials processing in end of production line, which can remove broken materials generated in the upstream processing efficiently, and process final product kernel with higher complete kernel rate with higher product value. The equipment is composed of two layers of screen, with fish scale screen and double vibration motor to achieve the best separation effect. At the same time, the machine is equipped with a cyclone dust removal for impurities cleaning effect in some extent. The product has simple structure and excellent sorting effect, and it is an important part of seed and kernel product processing line. Dimension(L*W*H)/m:3.6*3*4.2 Sieve size(L*W) /m:1.24*2 Layer Amount:2 Capacity(kg/h):2000-3000 Weight(t):2.1 Power(kW):7.5 Voltage:380V

The chili selecting production line is the latest production line developed by our company. Its main function is to improve the quality of chilis through sorting and grading. This production line has a reasonable design, large production capacity, strong practicality, good selection effect, and other characteristics. Power (kW):25.6 Voltage (V):380 Capacity (kg/h):3000-4000 Selecting rate:80%-90% Broken rate:within 5%

Multiple sets of servo motors are used to control all the emotion movements of the screw capping head.Use servo control the torque without damaging the caps.

Automatic ionized air rinser/bottle cleaning machine is mainly used for clean the inside of the container , both for glass and plastic bottles, usging the pure filted ionized air and sunction the dust to ensure the containers are cleaning. This bottle air rinsing machine is a linear types, multy heads from 2 nozzles to 20 nozzles to meet the capacity demand, the diving nozzles driven by servo motor, and if choose the turn up types for cleaning, the turning arm will be also driven by a servo motor. The machine is universal for glass bottle and plastic bottle rinsing with air.. It blows inside of bottle with clean air and sucking the dust out of the bottle. The working principle is: when the bottle into the conveyor, the compressed air will be discharged high pressure air to clean the container, when blowing air meanwhile will suction the dust. Power supply voltage:220V/50HZ Power:1.5 KW Use air pressure:0.4-0.6Mpa Bottle Cleaning speed:1800-2000bottle / hour Use air source:clean compressed air Adapt to bottle type:Plastic and glass bottle Equipment weight:450kg Shape size:L1500 x W1000 x H1900mm

Automatic drum liquid weighing filling machines are designed to fill drums with liquids using weight sensors and speed control technology. Some of the features of these machines include: Accuracy: These machines use weight sensors to ensure the accurate and consistent filling of drums with liquids. Speed control technology: The machines are equipped with speed-control technology, which allows for the precise and efficient filling of drums with liquids. Ease of use: The machines are designed to be user-friendly, with easy-to-use controls and quick changeover times. Versatility: These machines can handle a wide range of liquids from oils, solvents, chemicals, and other high-value liquids. Safety: The machines have built-in safety features, such as emergency stop buttons and guarding, to ensure operator safety. Low maintenance: Automatic drum filling machines are often designed for low maintenance Fill Range:50-300kg Division:0.1/0.05kg Speed:150-180can/h Barrel:≤Φ600×h1000 Power:AC380/50Hz Air:0.4-0.8mpa

Speciality Brass Machine Screw manufactured by CNC turning Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Peristaltic pump liquid filling machine is one type of liquid filler which adapts the positive displacement pump as a dosing system.The pumps use the principle of peristalsis as the basis for their design. It is mostly application for filling small dosing liquid, for it is high GMP standard,and only the inner bore of the tube touches the fluid, it eliminate the risk of the pump contaminating the fluid, or the fluid contaminating the pump, so most of the phamarcy factories adapt this equipment for filling their liquid into small vial, such as eye drops, ear drops,phamarceuticals liquids, also some top cosmetics ,biology liquid also filling by the peristaltic pump. Feature Easy to install, simple to operate and inexpensive to maintain For different flavor liquids only change the tubes high filling accuracy for small dosing liquid, from 1ml to 100ml is the best filling range if consider both the filling accuracy and speed Servo motor driven, easy adjustable filling volume. Speed:10-30bottles/min for one filling heads Filling range:1-100ml ideal Measurement precision:±0.5% depends on the liquid Working power:0.45KW for one pump Air pressure:4～6㎏/㎝² Air consumption:1m³/min according to the working situation Power rate:220V Other devices power rate: less 7.5kw（air compressor） Net weight:500Kg

Machinable Glass Ceramic has a continuous use temperature of 800ºC and a peak temperature of 1000ºC. Its coefficient of thermal expansion readily matches most metals and sealing glasses.It processes good machinability and can be lathed, milled, planed, ground, bored, incised and threaded. It also has the advantages of insulation, pore-free, high/low-temperature resistant, acid and alkali resistant and thermal impact resistant.

A pail liquid weighing filling machine is a type of equipment used in the packaging industry to accurately fill liquid products, such as chemicals, lubricants, and food ingredients, into pails or containers. This machine uses a weighing mechanism to ensure that the desired amount of product is delivered to each container. Application It is application for Food and chemical industries,quantitative filling of coating, solvent, chemical raw material Features: The system uses PLC, touch screen, safe and reliable Filling nozzle and pipe use quick coupling, convenient for removing and washing Automatic 2-shift filling with high accuracy The nozzle automatically lifts when reaching the target filling amount Gross or net filling mode is available Be able to set and store 30 groups of formula for use Free to set target filling amount in order to be convenient for different packing Filling with one button, easy to operate (manual operation mode available) Division:10g Filling Capacity:10~30kg Filling Accuracy:≤ 0.1% Filling Speed:120~240 Pail/hr Barrel Dimension:≤φ400×h500mm Air Pressure:0.4~0.8Mpa Filling Valve material:SUS304/316 Power:AC 110V/220V, 50/60Hz, 10A Operating Temperature:-10°C to 40°C

An automatic flowmeter filling machine is a type of equipment used in the packaging industry for accurately filling liquid products into bottles or containers. It uses a flowmeter to measure the volume of the liquid being filled and automatically stops the filling process once the desired volume is reached. Feature: It is PLC control the flowmeter open and shut off, servo motor driven the filling nozzles moving up and down. Capacity: The capacity of an automatic flowmeter filling machine can vary depending on the model, but typically ranges from 500 ml to 5 liters. Material: Most flowmeter filling machines are made from stainless steel or other food-grade materials to ensure the quality and safety of the product being filled. Speed: The speed of the filling process can be adjusted depending on the viscosity of the liquid and the desired fill volume. Cleaning: Flowmeter filling machines are designed to be easyto clean, with quick-release fittings and removable components Output::20B-60b/min No. of Filling nozzles :8 to 20 nozzles Precision: 0.5% Power Supply:220V 50/60Hz;110V,50/60hz Power:1.5KW Dimension (L W H):3000mm*1100mm*1900mm with dust cover Weight :1000kg

inner inlay tube size: end outer diameter 19.20 +0.04 mm, end inner diameter 19.00 + 0.04 mm height: 70 - 0.15 mm side hole diameter 11.70 - 0.05 mm 2 grooves width: 3.3 mm, 5.3 mm material: brass ASTM C28000 packing: individually placed in a plastic tray, then into carton manufactured by CNC turning and milling on sliding head multi-axis CNC lathe

BRAIDING MACHINE Model：DR31-1 Bobbin size (outer diameter * inner diameter * inner height)：48×18×142mm Spindles / group：31 Number of belts (root)：1 Dial speed(RPM)：300 Motor Power(kw)：0.75 Dimensions (L * W)：84×75cm Applicable ropes: Fancy belts and belts Brand:DURA Price:Discuss Port:Shanghai, Shenzhen,Ningbo Payment Terms:T/T, L/C, PAYPAL Delivery Time:10-25 days DR31-1 braiding machine:lace braiding machine Model:DR31-1 Bobbin size (outer diameter * inner diameter * inner height):48×18×142mm Spindles / group:31 Number of belts (root):1 Dial speed(RPM):300 Motor Power(kw):0.75 Dimensions (L * W):84×75cm Applicable ropes:Fancy belts and belts

The containers are picked up by the in feed star wheel and transferred to the container table. The container rotation begins when they are positioned between container plates and centering bells. The speed of the feed roller is adjusted to the required label length for continuous web tension. A standard threading unit ensures optimal film feed. In the cutting unit, the labels are precisely cut while a PLC command and servo-motor provide an exact cut-off point. Two narrow strips of hot melt glue the labels together, which are applied by a heated glue roller to the leading and trailing label edges. The label with the glue strip on its leading edge is transferred to the container. This glue strip ensures an exact label positioning and a positive bond. As the container is rotated during label transfer, labels are applied tightly. Gluing of the trailing edge ensures proper bonding. Process: In feed bottle → pre-position →label cutting → gluing → labeling → label by press out → finish Model:NP-HGL Bottle diameter:55mm-100mm Label exact:2mm Air Consumption:4Mpa Weight:1500 Kg Dimension of machine:L5000 × W1800 × H2000 mm