Produse pentru imagine (43)

ThermoView TV40 is a high-performance industrial thermal imaging system for fixed installation designed for factory automation applications. It integrates a visible-light camera and software for temperature control, monitoring, and data archiving. • Wide temperature range: -10 to 1200 °C (14 to 2192 °F) • Rugged aluminum housing, IP67 (NEMA 4) • Ambient temperatures to 200 °C (392 °F) with high-temperature enclosure • Air purge and accessories available • IR-Fusion technology: simultaneous thermal and visible sighting • Remote motorized focus • 320 x 240 and 640 x 480 focal plane array • 9 or 60 Hz models available • GigE Vision interface • LAN/Ethernet with PoE for communication with the camera provides access to Ethernet, Web server and ThermoView Software • Multiple field interchangeable lens options • 2-year warranty Measured temperature range:-10 to 1200 °C (14 to 2192 °F) Ambient temperatures:up to 200 °C (392 °F) with cooling enclosure Environmental protection:IP67 (NEMA 4) Spectral range:8-14 μm Accuracy:± 2 °C or ± 2% (reading) Frame rate:9 or 60 frames/sec Power supply:DC 12 to 26V, Power over Ethernet (PoE) Resolution:320 x 240px or 640 x 480px Field of view:Horizontal 34° x 25.5° Add-on lens options:0.75 wide lens , 2x lens, 4x lens, macro lens LED display:Power supply indication, system error codes Power Consumption:8 W (typical) 13 W (maximum) Accessories:Pan and Tilt

• Real-time thermal imaging, scan speed up to 300 Hz • Up to 1024 measurement points per line • Wide choice of spectral and temperature ranges • High-quality brushless motor (MTBF 40,000 h) • Built-in Ethernet TCP/IP communications • PC independent alarm output • PC independent 4-20 mA interfaces (3 outputs) • I/O module support for up to 10 sectors/zones (PC independent) • Internal Line Laser for accurate alignment • Rugged, waterproof IP65 enclosure • Air purge keeps window free of dirt and condensation • Built-in water cooling for ambient up to 180 °C (356 °F) Plastic Processing:Blown Film Extrusion; Cast Film Extrusion; Plastic Sheet Extrusion; Extrusion Coating; Thermoforming Metals Processing:Foundry Processing; Sinter Plant; Continuous Casting; Hot Rolling Mills; Rod and Wire Mills Construction Materials:Cement Processing; Gypsum Wallboard Production; Asphalt Production Glass Production:Float Glass Process; Flat Glass Tempering; Automotive Glass - Windshield Forming and Laminating Paper Processing:Paper Pulp Processing; Cardboard Production; Paper Drying; Extrusion Coating and Laminating

The ThermoView TV30 thermal imaging camera provides a rich feature set of automation and control capabilities along with the expected durability to meet the demanding industrial applications that FPI product need to survive in. TV30 can interface directly to factory automation equipment, 3rd party software such as Labview, or Fluke Process Instruments ThermoView software. By incorporating a built-in I/O for automation applications in a small foot print, you can expand your field of view by providing continuous infrared images, recording, and actionable analytics right at your fingertips. To meet the factory automation needs of today, TV30 cameras utilize edge technology to provide analytics calculations and on board I/O, multiple fieldbus protocol capabilities to interface to a variety of factory automation equipment, along with high-speed GigE vision capability for the most demanding applications.

— Minimisez les interventions des opérateurs grâce à une solution intégrée et entièrement automatisée — Collectez des données depuis des zones inaccessibles ou dangereuses pour préserver la sécurité de vos équipes — Surveillez les évolutions des signatures sonores en temps réel pour éviter les interventions de maintenance correctives Visualisez ce qui est inaudible et invisible grâce aux performances de l’imagerie acoustique. L’imageur acoustique fixe SV600 permet aux utilisateurs de détecter, localiser et visualiser en continu les fuites d’air et de gaz ou les évolutions des signatures sonores avant qu’elles ne deviennent des problèmes coûteux.

La caméra d’imagerie thermique ThermoView TV30 offre une gamme de fonctions étendue pour l’automatisation et le contrôle qui, alliés à la résistance renommée, permettent de satisfaire aux applications industrielles exigeantes auxquels les produits Fluke Process Instruments doivent survivre. La TV30 peut communiquer directement avec les équipements d’automatisation industriels, ainsi que les logiciels de tiers tels que Labview, et naturellement aussi avec le logiciel ThermoView de Fluke Process Instruments. In intégrant des E/S embarquées destinées aux applications d’automatisation dans un dispositif compact, vous pouvez étendre votre champ de vision et produire en un tour de main et en continu des images infrarouge, des enregistrements et des analyses activables.

The ES Thermal Imaging System for Sheet Extrusion from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for moving processes and product. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized applications and industrial environments. The ES Thermal Imaging System is ideal for continuous web applications such as hot strip mills, continuous casting, glass wool production, laminating for both glass and plastics and more. MP Linescanner With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field Temperature Range:wide variety of temp ranges and spectral responses Optical Resolution:up to 200:1 (90% energy) Field of View:90° Points per Line:up to 1024 pixels Scan Rate:up to 300 Hz

By using an array of sophisticated sound sensors, the SV600 can be mounted close to any equipment or asset, to any area of the production line, or where human access is restricted or dangerous to ensure you can monitor the most important parts of your facility without interruption. As a fixed, automated solution, the SV600 integrates with your process and eliminates the need for lengthy fault-finding processes such as soapy water tests, when used as part of your product leak testing process. By continuously monitoring your environment, you can quickly detect and fix air leaks – reducing your consumption of compressed air and energy to help save your facility money. Key Features: High-end 24/7 acoustic monitoring 64-Digital MEMS microphones placed in a Sunflower Array Integrated visual light camera Powerful processor for onboard real time processing Sound classification Frequency filtering dB values and sound intensity mapping Event triggering Dimensions (L x W x D):170 x 170 x 65 mm (6.69 x 6.69 x 2.56 inch) Weight:0.85 kg (1.7 lbs) Integrated Visible Light:Included with fixed lens Resolution Video:640 x 480 Camera Field of View:65° ±3° Camera Resolution:720 p at 30 fps Type:MEMS, Digital Bottom Port SNR (A-weighted, at 1 kHz):64 dB for 94 dB SPL @ 1kHz Sensitivity:-26 dB FS +/-1.5 dB at 1 kHz, 94 dB SPL Acoustic Overload Point:120 dB SPL at 1 kHz, <10 % THD Ingress Protection:IP54 Operating Temperatures:-20 °C to 50 °C (4 °F to 122 °F) Audio:.wav (audio verification)

The TF Thermoforming Thermal Imaging System from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for thermoforming processes. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized applications and industrial environments. The TF Thermal Imaging System is ideal for applications reaching temperatures from 20 to 350°C (68 to 662°F). MP Linescanner With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field-of-view and up to 200:1 optics, each spot on the target surface is capable Temperature Range:20 to 350°C (68 to 662°F) System Accuracy:±2°C (4°F) Repeatability:±1°C (2°F) Optical Resolution:170:1 (90% energy) Field of View:90° Points per Line:up to 1024 pixels Scan Rate:up to 300 Hz

The TIP900 system is a comprehensive thermal imaging and noncontact profiling system designed to supervise the temperature of wallboards coming out of the oven. It uses an infrared thermal imager to continuously scan the entire board surface temperatures and allows the detection in real time of moisture and density variations inside each board. The powerful TIP900 software provides sophisticated data integration, visualization and event analysis, and offers users a complete solution of real-time monitoring, detection and traceability. It also analyzes and provides optimal oven dryer profile balance. The detailed wallboard quality maps, the historical temperature trend charts and the images can be seen locally at the operator workstation or remotely. All data is stored in the LogViewer database for complete process visibility and long term traceability. TIP900 System Software Detailed continuous board quality monitoring (100% of all board images are archived)

The ThermoView TV40 is a high-performance industrial fixed thermal imaging system that allows you to expand your understanding by providing continuous infrared and visual feeds to visualize temperature data. The TV40 offers a fully integrated temperature control, monitoring, and data archiving solution. With the ability to personalize your integration, the TV40 allows you to automate your process by programing unlimited "areas of interest," programable alarms, utilize advanced pass/fail logic, and perform safety or asset inspections. Feed the data to your PLC or view feeds remotely. Hardware The rugged TV40 thermal camera lets you visualize the temperature data you need anywhere in your process with reliable, high-quality 320x240 and 640x480 infrared resolution options. Several key features: IP67 (NEMA 4) housing that guarantees long-term thermal imaging in the harshest environments (air purge and other accessories available) Simultaneous infrared and visible sighting Measurement Accuracy:±2°C or ±2°% (reading) Models:9 or 60 Hz Field of View:Horizontal 34º x 25.5º Spectral range:8 - 14 μm Detector:Uncooled focal plane array Operating Temperature:-10 to 50°C (14 to 122°F) Storage Temperature:-20 to 50°C (-4 to 122°F) Humidity:10 to 95% non-condensing Environmental Protection:IP67 (NEMA 4) Weight:Approximately 1.08kg (2.38lbs)

The Extrusion Coating EC Thermal Imaging System from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for moving processes and product. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized extrusion coating, co-extrusion and laminating processes.The series also features dedicated hardware and software options, which have been created specifically for specialized extrusion coating, co-extrusion and laminating processes. MP Linescanner With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field Temperature Range:100 to 350°C (212 to 662°F) System Accuracy:±3°C (6°F) Repeatability:±1°C (2°F) Optical Resolution:225:1 (50% energy) Field of View:90° Scan Rate:up to 300 Hz

Building on the versatile, high-performance ThermoView TV40 Thermal Imager, the Pan and Tilt is a new integrated system and housing accessory designed for remote temperature monitoring in substations and electric utility applications. No aspect of modern society can function without power, so keeping the power distribution grid up and running is essential in order to maintain our day-to-day lives. As renewable energy sources continue to make headlines, traditional power utility companies are facing increased pressure to provide low-cost energy. This, paired with aging infrastructure, is putting additional stress on power generation facilities—which, if critical equipment fails, can ultimately disrupt power supplied to the grid. Now more than ever, power facilities must implement solid temperature monitoring solutions to that can help to identify possible equipment failures, perform preventative Wide temperature range:-10 to 1200°C (14 to 2192°F)

The GS Thermal Imaging System for Glass Processes from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for moving processes and low emissivity glass products. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized glass applications – such as glass bending, forming, annealing and tempering – and industrial environments. MP Linescanner With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field-of-view and up to 200:1 optics, each spot on the target surface is capable Temperature Range:100 to 950°C (212 to 1742°F) System Accuracy:±0.5°C or ±3°C (6°F) Repeatability:±1°C (2°F) Optical Resolution:170:1 (90% energy) Field of View:90° Points per Line:up to 1024 pixels Scan Rate:up to 300 Hz