Produse pentru alimente (737)

Dr. Paul Lohmann® offers LomaSalt 2.0 Basis as crystalline powder in food grade. Compared to conventional table salt, LomaSalt® contains 50 % less sodium and is therefore used to reduce the sodium content in nutrition.

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 32 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements Operating temperature:-45 °C → +135 °C Density (20 °C):0.83 g/ml Viscosity (40 °C):32 mm²/s

Sealing lubrication of sliding surfaces, e.g. ground-in parts such as taper plugs, dosing plungers, valves, beer taps etc. Maintenance lubrication of plastic and rubber parts, as well as stuffing boxes, lip seals and O-rings Rolling and friction bearing lubrication in slow-running areas, toothing or chains on filling and packaging machines, stirring and grinding mechanisms etc. Advantages and benefits Highly effective due to proven lubricant formula Fulfils most demanding hygienic requirements. Reduced maintenance and lubricant costs due to possible long-term lubrication Resistant to hot and cold water, water vapour, wateryalkaline and acidic disinfectants and cleaning agents Neither hard residues result, nor is there a tendency to soften or drip due to pasteurisation or sterilization Odour and taste-free, and does not affect the properties of beer foam Toxicologically harmless as defined in German LFGB Operating temperature:-10 °C → +140 °C NLGI grade:3 Base oil viscosity (40 °C):1,600 mm²/s

Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection Also available as spray version OKS 3571 MOSH/MOAH-free Operating temperature:-10 °C → +250 °C Density (20 °C):0.87 g/ml Viscosity (40 °C):300 mm²/s

Grease lubrication of friction and rolling bearings at low operating temperatures Grease lubrication of friction and rolling bearings at high speeds Grease lubrication of bearings with low coasting moments or low bearing play Advantages and benefits NSF H1 registered Low-viscosity, fully synthetic base oil ensures the functionality of the lubricating film up to -70°C Very good conveying capability in central lubricating systems also at low temperatures Clean the surfaces for optimal effect. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing Operating temperature:-45 °C → +120 °C NLGI grade:1 DN factor (dm x n):800,000 mm/min Base oil viscosity (40 °C):30 mm²/s

Grease lubrication of rolling and friction bearings, joints, linear drives and chains Lubrication of fittings, seals, moulded parts and elements of elastic rubber materials in the hot- and cold-water segment Lubrication of fittings or machines in dairies, breweries, bakeries, slaughterhouses, etc. Advantages and benefits NSF H1 registered Reduces wear Excellent resistance to oxidation and ageing Resistant to hot and cold water, water vapour, watery-alkaline and acidic disinfectants and cleaning agents Operating temperature:-30 °C → +110 °C NLGI grade:2 DN factor (dm x n):400,000 mm/min Base oil viscosity (40 °C):240 mm²/s Four-ball test rig (welding load):2,200 N

Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection MOSH/MOAH-free Operating temperature:-10 °C → +250 °C Density (20 °C):0,87 g/ml Viscosity (40 °C):300 mm²/s

Lubrication of valve seals, collars, O-rings, drives, piston rods and guides Lubrication of slides, slat-band and roller chains Lubrication of cutting knives as well as of needles and lifters of knitting machines Dismantling of rusted-in parts and removal of oil and greasy soiling Advantages and benefits NSF H1 registered Highly effective due to good creep properties Broad range of uses Displaces water OKS 370 is suitable for use with the OKS Airspray system Also available as spray version OKS 371 Clean the surfaces for optimal effect. Apply OKS 370 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system locations to be lubricated. Spray on evenly OKS 371 spray. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on the basis of the service conditions. Caution: Only mix with suitable lubricants. Operating temperature:-10 °C → +180 °C Density (20 °C):0.88 g/ml Viscosity (40 °C):14 mm²/s

For closed gear units and geared motors, plain and friction bearings even at higher rotating speeds, e.g. on filling and packaging machines For joints, propeller shafts and chains when grease lubrication is specified Advantages and benefits Toxicologically harmless as defined in German LFGB Formula in accordance the FDA guideline 21 CFR 178.3570 NSF H1 registered Long operating times due to good resistance to oxidation and ageing Reduced wear due to highly adhesive, load-bearing lubricating film Excellent corrosion protection Low dynamic viscosity enables use with minimal bearing play and gear unit spaces Good pumpability with central lubricating systems Very high resistance to hot and cold water, watery-alkaline and acidic disinfectants and cleaning agents Operating temperature:-45 °C → +120 °C NLGI grade:0-00 DN factor (dm x n):500,000 mm/min Base oil viscosity (40 °C):160 mm²/s

Lubrication of all kind of high stressed sliding areas, especially at low sliding speeds or oscillating movements, e.g. at threads, joints and bayonet nut connectors made of steel or non ferrous metals Assembling paste with corrosion protection for screws, bolts, spikes, bushings, flanges, spindles and fittings in the whole food stuff industry Separation of high temperature stressed screw joints, even after a long operation time Advantages and benefits Adheres good on metal surfaces, has a good water resistance and corrosion protection Good water resistance Prevents from tribo-corrosion Contains no metal pigments and is free of sulphurous materials Neutral to alloyed steels Formulation according to the FDA guideline 21CFR 178.3570 Registered by the NSF H1 MOSH/MOAH-free For optimal adhesion clean thread and sliding areas from dirt and other lubricants, first mechanically (e.g. with wire brush) and then with OKS 2610/OKS 2611 Universal Cleaner. Apply paste evenly in a sufficient amount Operating temperature:-30 °C → +160 °C/+1,200 °C (lubrication/separation) Press-fit:µ = 0.12 Thread friction (M10/8,8):µ total = 0.15

Lubrication of closed toothed gearing Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1 registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-30 °C → +120 °C Density (20 °C):0.85 g/ml Viscosity (40 °C):320 mm²/s FZG damage level:power level > 12

Doppelmembranpumpe DMP Modell 1/2" PURE für den Lebensmittel- und Pharmabereich - Die Doppelmembranpumpe ist für den Lebensmittel- und Pharmabereich sowie die Fass-, IBC- und Tankentleerung geeignet. * typische Anwendungen: flüssige Nahrungsmittel und Genussmittel, pharmazeutische Wirkstoffe und kosmetische Produkte * integrierter Schalldämpfer bis zur Modellgröße DMP 1" * FDA-konform Eigenschaften & Vorteile * hohe hydraulische Leistung * wartungsoptimierte Konstruktion und einfache Installation * selbstansaugend (auch in trockenem Zustand) * eisfreies Luftsystem * blockadefreier Betrieb * lebensmittelgerechte Anschlüsse * Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser.

La nueva B3 Battery es un motor de batería para aplicaciones de bombeo exigentes y eficientes. El rango de aplicación independiente de la corriente permite la mayor flexibilidad posible con el caudal más alto del mundo de una bomba de batería (hasta 180 l/m). Perfectamente adecuada para la extracción o transferencia de alimentos. * Unidad de bombeo equipada con volante manual Lutz Original Características y ventajas *motor BLDC sin desgaste y especialmente silencioso * vaciado optimizado del tambor * infinitamente variable * rendimiento extremadamente alto con poco peso * Mantenimiento sin herramientas especiales * Los módulos de sellado de la bomba sin sellado (DL) se pueden sustituir * larga vida útil

Lubrication of closed toothed gearing Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1 registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-25 °C → +120 °C Density (20 °C):0.86 g/ml Viscosity (40 °C):680 mm²/s FZG damage level:power level > 12

La bomba de doble membrana es adecuada para la industria alimentaria y farmacéutica, así como para el vaciado de bidones, IBC y depósitos. — aplicaciones típicas: alimentos líquidos y semilíquidos, sustancias farmacéuticas y productos cosméticos — silenciador integrado hasta el tamaño del modelo AODD 1 — Conforme a la FDA Características y ventajas — alto rendimiento hidráulico — diseño de mantenimiento optimizado e instalación sencilla — autocebado (incluso en seco) — sistema de aire sin hielo — Funcionamiento sin bloqueo — conexiones seguras para los alimentos —-- Traducción automática (ver el original en inglés)

Fully synthetic oil for use at permanently low temperatures in all areas of the food processing industry, for example in cold storage houses, shock freezers, etc. Chain lubrication at arctic temperatures Advantages and benefits NSF H1-registered MOSH/MOAH free Excellent low-temperature behaviour Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, as well as disinfectants and cleaning agents Long economic operating times Operating temperature:-60 °C → +135 °C Density (20 °C):0.80 g/ml Viscosity (40 °C):7.35 mm²/s

Das horizontale Pumpwerk ist geeignet für die Entleerung wässriger und fettiger Lebensmittel aus IBC Containern oder Tanks und ist die perfekte alternative zu den vertikalen Fasspumpen. Je nach Einsatzfall stehen Ihnen verschiedene Motore zur Verfügung, die Sie jederzeit mit dem Pumpwerk kombinieren können. Somit sind Sie jederzeit flexibel und schonen damit wichtige Ressourcen. * Horizontaler Anschluss am Bodenlauf des Containers * Pumpwerk ausgestattet mit Lutz Original Handrad * auch für alkoholhaltige Lebensmittel, Kosmetika und Pharmartikel sowie entzündbare Reinigungsmittel * Wahlweise mit Elektro- oder Druckluftantrieb * Geringer Verlust des Mediums bei Abkoppeln * Lebensmittelgerechte Anschlüsse * Zugelassen nach ATEX Richtlinie 2014/34/EU, Kategorie 1/2 * Zugelassen nach FDA und Verordnung (EG) 1935/2004 Der Wert der maximalen Fördermenge wird anhand fester Parameter und mit den immer gleichen Bedingungen ermittelt. Diese entnehmen Sie bitte unserer Webseite.

Das horizontale Pumpwerk ist geeignet für die Entleerung wässriger und fettiger Lebensmittel aus IBC Containern oder Tanks und ist die perfekte alternative zu den vertikalen Fasspumpen. Je nach Einsatzfall stehen Ihnen verschiedene Motore zur Verfügung, die Sie jederzeit mit dem Pumpwerk kombinieren können. Somit sind Sie jederzeit flexibel und schonen damit wichtige Ressourcen. * Horizontaler Anschluss am Bodenlauf des Containers * Pumpwerk ausgestattet mit Lutz Original Handrad * auch für alkoholhaltige Lebensmittel, Kosmetika und Pharmartikel sowie entzündbare Reinigungsmittel Eigenschaften & Vorteile * Wahlweise mit Elektro- oder Druckluftantrieb * Geringer Verlust des Mediums bei Abkoppeln * Lebensmittelgerechte Anschlüsse * Geringer Platzbedarf * Zugelassen nach FDA und Verordnung (EG) 1935/2004 * Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C.

The electric pump set is suitable for low to high viscosity media in the food & pharmaceutical sector and is perfect for dispensing or transferring foodstuffs. * Pump tube equipped with Lutz Original handwheel Features & advantages * optionally with electric or compressed air drive * lubricant-free: therefore no contamination of the pumped medium * facilitated and accelerated emptying processes * universally resistant ETFE shaft bearing * easy disassembly: maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced

Die Doppelmembranpumpe ist für den Lebensmittel- und Pharmabereich sowie die Fass-, IBC- und Tankentleerung geeignet. typische Anwendungen: * flüssige Nahrungsmittel und Genussmittel, pharmazeutische Wirkstoffe und kosmetische Produkte * integrierter Schalldämpfer bis zur Modellgröße DMP 1" * FDA-konform * hohe hydraulische Leistung * wartungsoptimierte Konstruktion und einfache Installation * selbstansaugend (auch in trockenem Zustand) * eisfreies Luftsystem * blockadefreier Betrieb * lebensmittelgerechte Anschlüsse * Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab.

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 46 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements Operating temperature:-40 °C → +135 °C Density (20 °C):0.84 g/ml Viscosity (40 °C):50 mm²/s

The horizontal pumping unit is suitable for emptying aqueous and fatty foodstuffs from IBC containers or tanks and is the perfect alternative to vertical drum pumps. Depending on the application, various motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources. * Horizontal connection at the bottom of the container * Also for alcoholic foodstuffs, cosmetics and pharmaceutical products as well as flammable cleaning agents * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Food-safe connections * Approved in accordance with ATEX Directive 2014/34/EU, category 1/2 * Approved according to FDA and Regulation (EC) 1935/2004 The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

Cleaning of bearings and machine parts Removal of aged and gummy oil and grease residues Dissolving of silicone and adhesive residues Preparation of surfaces for bonding Advantages and benefits High cleaning action through optimally matched mixture of active substances Rapid, residue-free evaporation of the cleaner NSF K1 K3 registered Good compatibility to common plastics such as polypropylene (PP), polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS), polyethylene terephthalate (PET), polystyrene (PS), polyoxymethylene ((POM), polyvinyl chloride (PVC), polyethylene (PE), polytetrafluoroethylene (PTFE) OKS 2670 is suitable for use with the OKS Airspray system Also available as spray version OKS 2671 Density: (20 °C):0.78 g/ml

Die Pure-Ausführung der Exzenterschneckenpumpe HD-E-SR überträgt die Vorteile der Fasspumpe auf hochviskose Medien. Mit leicht lösbarer Bauweise und einem Außendurchmesser von max. 41 mm ermöglicht sie das Abfüllen von viskosen Flüssigkeiten bis zu 30.000 mPas. Die Pumpe ist einfach zu demontieren und zu reinigen, kann mit Elektro- oder Druckluftmotoren kombiniert werden und sichert so das Entleeren der Flüssigkeiten, was wichtige Ressourcen schont. * auch in Sondertauchtiefen erhältlich * Medienbeispiele: viskose Kosmetik-Produkte, Lebensmittel und etc. * Wahlweise Antrieb durch Elektro- oder Druckluftmotoren * Leicht und vielseitig durch geringes Motorengewicht * Kontinuierliche, pulsationsarme Förderung von bis zu 15 Liter/min * Geringer Verschleiß * Leichte lösbares Außenrohr

Highly adhesive lubrication of moving parts, e.g. valve spindles, piston rods, wire cables, drag cables, drive and conveyor chains, hinges and guides, at highly corrosive conditions in food processing technology Temporary corrosion protection of ferrous and non-ferrous metals, in particular in highly corrosive atmospheres, such as industrial atmospheres, outdoor weathering under roofs of semi-finished products and finished products Shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions Advantages and benefits Highly adhesive oil with very good creep and lubrication properties Optimal corrosion protection through high effectiveness of the corrosion protection additive After the solvent has dried, forms a transparent, highly adhesive oil film Contains non-ferrous metal deactivator NSF H1-registered Also available as spray version OKS 3601 Operating temperature:-40 °C → +80 °C Density (20 °C):0.81 g/ml Viscosity (40 °C):> 21.5 mm²/s Salt spray test:> 100 h

El conjunto de bomba eléctrica es adecuado para medios de baja a alta viscosidad en el sector alimentario y farmacéutico, y perfecto para dispensar o decantar alimentos. * Unidad de bombeo equipada con volante manual Lutz Original Características y ventajas *opcionalmente con accionamiento eléctrico o por aire comprimido * sin lubricante: por tanto, no se contamina el medio bombeado * procesos de vaciado facilitados y acelerados * cojinete del eje de ETFE universalmente resistente * fácil desmontaje: mantenimiento sin herramientas especiales * Los módulos de sellado de la bomba sin sellado (DL) se pueden sustituir

Fully synthetic oil for use at permanently low temperatures in all areas of the food processing industry, for example in cold storage houses, shock freezers, etc. Chain lubrication at arctic temperatures Advantages and benefits NSF H1 registered MOSH-/MOAH-free Excellent low-temperature behaviour Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, as well as disinfectants and cleaning agents Long economic operating times Also available as spray version OKS 3711 Operating temperature:-60 °C → +135 °C Density (20 °C):0.80 g/ml Viscosity (40 °C):7.35 mm²/s

The Pure version of the progressive cavity pump HD-E-SR transfers the advantages of the drum pump to highly viscous media. With an easily detachable design and an outer diameter of max. 41 mm, it enables the filling of viscous liquids up to 30,000 mPas. The pump is easy to dismantle and clean, can be combined with electric or compressed air motors and thus ensures the emptying of liquids, which conserves important resources. * Also available in special immersion depths * Examples of media: viscous cosmetic products, foodstuffs, etc. * Optionally driven by electric or compressed air motors * Light and versatile due to low motor weight * Continuous, low-pulsation delivery of up to 15 litres/min * Low wear and tear * Easily detachable outer tube

Doppelmembranpumpe DMP 1 1/2" PEE PURE für den Lebensmittel- und Pharmabereich - Die Doppelmembranpumpe ist für den Lebensmittel- und Pharmabereich sowie große Fördermengen und höhere Viskositäten geeignet. * typische Anwendungen: flüssige Nahrungsmittel und Genussmittel, pharmazeutische Wirkstoffe und kosmetische Produkte * integrierter Schalldämpfer bis zur Modellgröße DMP 1" * FDA-konform * hohe hydraulische Leistung * wartungsoptimierte Konstruktion und einfache Installation * selbstansaugend (auch in trockenem Zustand) * eisfreies Luftsystem * blockadefreier Betrieb * lebensmittelgerechte Anschlüsse * Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab.

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 68 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements Operating temperature:-40 °C → +135 °C Density (20 °C):0.83 g/ml Viscosity (40 °C):66 mm²/s