Produse pentru testează (199)

Without a doubt, the B28 is the smallest high-performance leak tester for battery cells and breathable membranes. One of the main advantages is that our B28 module can quickly test the cell’s insulation. To ensure the best measurement conditions, the B28 has the optional capability to control filling and dumping vacuum around the part to test in a specific enclosure. You can daisy chain up to 50 modules and monitor them with a touch screen panel and our user-friendly interface: B28 control. Leak measurement using air ionization method (I max<1 mA) Compact size External vacuum source Integrated fill and dump valves Ethernet network up to 50 modules (Modbus IP) DIN rail mounting Environment: ROHS standard A high voltage loaded sharp end is applied next to an earth connected base and in between lays the plastic part we test. Weight:approx.3.5 Kg Dimensions:(overall (mm): H 155.5 x L 97 x D 229.5 Operating:+ 5°C to + 45°C Storage:0°C to + 60°C Voltage:24 V DC / 1.6 A

F670LV is a breakthrough instrument able to leak test very large volumes using a new patented technology (Based on Pressure Decay) thanks to the high sensitivity of our latest pressure transducer. By using ATEQ’s F670LV Differential Pressure Decay leak Tester with DNC, it is now possible to detect pressure drops below 0.1 Pa/sec. Parts with very large volumes such as tanks, electrical car batteries… An EV battery housing is a great application for ATEQ’s new DNC leak testing technology since it is a large, flexible component that is easily affected by variations in background noise. 128 programs Large Flow Valves for fast management of the parts Fully integrated electronics and pneumatics Flexible communication format: RS232, USB Weight:35 Kg Dimensions:(WxHxD) H295*W520*D550 Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

Without any doubt the smallest high pressure leak detector on the market. The F600 HP is equiped with the technical innovations of the 6 series and allows high pressure leak testing at a very competitive price. Catheters, refrigeration parts, oil radiators, HP tubes and pipes, valves, hydraulic brakes Pressure decay leak testing from 5 to 1000 kPa Range of measurement from 20 to 175 bar 128 programs Mechanical regulation 2 MPa/ 5 MPa/ 10.0MPa/ 17.5 MPa Electronic regulation 4 MPa Flow units (sccm, mm3/s, cm3/s, cm3/min, cm3/h…) Desensitized Test and others, depending on your applications Weight :7 Kg Dimensions:(WxHxD) 250x150x360 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

ATEQ inovates in the measurement industry with this new instrument: the MF520. It associates speed with accuracy of leakage measurement through differential pressure drop measurement and flow measurement stability. Leak detection and flow control: valve seats, gear boxes, hydraulic components, motors, control of aerosols, injectors Measurement range: 2 / 20 / 200 ml/min Measurement units: SI, USA (SAE) and custom unit Indications of the ambiant temperature and atmospheric pressure Measurement element fully integrated into one module Normes ROHS RS232: printer, P.C. and memory modules RS232: intelligent RC5 remote control RS485: ATEQ network Weight:Approximately 7 Kg Dimensions:(WxHxD) 250x150x360 mm Operating:+10°C at + 45°C Storage:0°C at + 60°C

All-In-One TPMS & Tire Management Tool Introducing the all-new VT57 with a brand new touchscreen interface, 100% OEM sensor diagnostic coverage, 90% OBD coverage, tire tread depth capturing, “Sync-ID” OBD technology and much more. Constant Live Sensor updates and the ability to connect Wi-Fi to ensure that the VT57 has the latest coverage available. All-new updated user interface Touch-screen capability Comprehensive make, model, year specific relearn procedures Programs all leading aftermarket programmable sensors WiFi & real time updates, powered by Live Sensor™ TPMS reset via OBD2 on more than 90% of car models Retrieve/Clear TPMS DTC codes DOT Recording TPMS sensor part number look-up (OE and aftermarket) ECU unlocking for Toyota family of vehicles Tire Tread Depth functionality (Accessory Sold Separately) PN:TS57-1002 (w/OBDII)

CLICK HERE TO VIEW THE FULL INDUSTRIAL TPMS EQUIPMENT CATALOG

WIRELESS THERMAL PRINTING The wireless IR thermal printer allows the user to print detailed information about TPMS sensors and tire tread depth. This allows shops to print information for record keeping and/or for the customer. The printer charges within the docking station accessory for the VT56 tool. Print detailed information including: Customer and Vehicle Information TPMS Sensor IDs Tire Pressure Temperature Sensor Battery Life Tire Tread Measurements PN:PRIR-0000

Schrader Sensor Activation Tool The VT6 activates Schrader TPMS sensors to assist in resetting TPMS systems. The VT6 sends an RF signal to the TPMS sensor mounted to the vehicle’s wheel to “wake up” the sensor. Once the tool triggers the sensor, the sensor is ready to communicate with the vehicle’s ECU. While holding the tool over the valve stem, press the button to activate the sensor. The tool will blink during this process. Continue to hold the button down until successful signal transfer to the vehicle’s ECU or until the vehicle’s horn “beeps” PN:VT6

After 46 years, and 275,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its new leak tester: F6CLASS. New electronic module, new measurement module, new interface, new accessories… All has been made to improve your quality control. And yet, inside can be found the latest leak testing technics and technology that will guarantee you the fastest and most accurate leak testing cycle on the market for an entry level tester. Automotive, domestic appliances, Medical, aeronautic, defense, Fluid and electrical components, food and cosmetic packaging, Mobile and wearable electronic devices Differential pressure decay leak measurement 16 programs Setting on line (via USB) 2 languages (English + other one) Manual calibration on front panel with calibrated leak Data storage on internal memory or USB key Weight:7 Kg Dimensions:(WxHxD) 254x150x170 mm Overall dimensions:(WxHxD) 254x150x256 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

The CDF60 calibrator checks the calibration of leak and flow ATEQ instruments as well as any other instrument. This light, compact and user friendly calibrator is essential for field or laboratory checks, when accuracy and repeatability cannot be compromised and large instrument are too bulky or too expensive. With the CDF60, you can now easily check and follow the requirements of ISO or other quality standards. Atmospheric pressure and temperature indicators Automatic sleep mode Print out (USB or RS232) Battery level check LCD display (4 x 20 characters) 1 year warranty Accessories: Carrying case, needle valve, soft case, protective holster Operating:+ 10°C at + 45°C Storage:0°C at + 60°C

TPMS Sensor Activation and Programming Tool The VT36 TPMS programming tool offers functionality and flexibility at an affordable price. Its rugged casing and durable rechargeable battery is designed for tough service station environments. Thanks to frequent updates, the newest TPMS sensors and vehicles are introduced each year. Comprehensive make, model, year look-up Displays TPMS sensor data (ID, tire pressure, tire temperature, battery status, frequency) Reads and activates all known TPMS sensors Programs all leading aftermarket programmable sensors TPMS sensor part number look-up (OE and aftermarket) Multi-lingual, 23+ languages Worldwide TPMS technical support PN:VT36-0000

After 46 years, and 275,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its revolutionnary valves tester ERD620. New electronic module, new measurement module, new interface, new accessories… All has been made to improve your quality control. The purpose of the instrument is to generate a pressure ramp and is waiting for an event as a flow appears (ex: valve opening). A ramp down can also detect when valve is closed. The instrument will display the event pressures and compare them to reject levels. As an option the flow event can be replaced by a dry contact event. FLOW CONTROL Opening valves, closing valves with flow detection… LEAK DETECTION Leaking levels with flow detection… CONTROL Pressure contact elements… Flow measurement in direct or indirect testing Wide flow measurement range USA, S.I. and customer units Measurement in standard or customised conditions Recalculated flow at the nominal pressure Measurement element fully integrated into one module Weight:8 Kg Dimensions:(WxHxD) 250x150x360 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

LIGHT TPMS RESET TOOL The Quickset Light TPMS Reset Tool is the ideal tool for the DIYer who wishes to reset the TPMS light himself, after having changed or rotated tires, or replaced a dead TPMS sensor. This simple TPMS relearn tool transfers the new TPMS sensor ID’s into the vehicle’s ECU (Electronic Control Unit). The Quickset TPMS reset tool can store two sets of wheels for each car (summer and winter tires) and is limited to four cars. Obtain wheel sensor ID’s from a TPMS tool such as a VT56 or VT37 or from a tool workshop. Switch summer and winter tires Print TPMS data for personal or customer use on PC Resets TPMS through OBDII Cable Fully updateable via PC PN:OBD3-0000

After 46 years, and 275,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its revolutionary leak tester : F610. This instrument is particularly suitable for polluted workplaces (dust, oil, etc.). New electronic module, new measurement module, new interface, new accessories… All has been made to improve your quality control. Inside is the latest leak testing technology that will guarantee you the fastest and most accurate leak testing cycle on the market. Automotive, domestic appliances, medical, aeronautic, defense, fluid and electrical components, food and cosmetic packaging… Differential pressure decay leak measurement. Use in pressure and vacuum Large range of leak measurement (ΔP) F.S. : 50 Pa, 500 Pa or 5000 Pa Mechanical or electronic regulator from vacuum to 20 bar 128 programs Setting on line (via USB) 2 languages (English + other one) Manual calibration on front panel with calibrated leak Data storage on internal memory or USB key Weight:10 Kg Dimensions:(WxHxD) 380 x 287 x 120 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

After 47 years, and 275,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its revolutionary leak tester range : the F6 series including a compact leak tester F620, a weatherproof leak tester F610 and the F670 in its 19″3U industrial format. New electronic module, new measurement module, new interface, new accessories… All has been made to improve your quality control. And yet, inside can be found the latest leak testing technics and technology that will garantee you the fastest and most accurate leak testing cycle on the market. Automotive, domestic appliances, medical, aeronautic, defense, fluid and electrical components, food and cosmetic packaging Differential pressure decay leak measurement Large range of leak measurement (∆P) F.S.: 20Pa, 50 Pa, 500 Pa or 5000 Pa Mechanical or electronic regulator from vacuum to 20 bar 128 programs Setting on line (via USB) 2 languages (English + other one) Weight:7 Kg Dimensions:(WxHxD) 250x150x360 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

After 46 years, and 275,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its revolutionnary leak tester: F670. New electronic module, new measurement module, new interface, new accessories… All has been made to improve your quality control. And yet, inside can be found the latest leak testing technics and technology that will garantee you the fastest and most accurate leak testing cycle on the market. Automotive, domestic appliances, medical, aeronautic, defense, fluid and electrical components, food and cosmetic packaging Differential pressure decay leak measurement Large range of leak measurement (∆P) F.S.: 50 Pa, 500 Pa or 5000 Pa Mechanical or electronic regulator from vacuum to 20 bar 128 programs Setting on line (via USB) 2 languages (English + other one) Manual calibration on front panel with calibrated leak Data storage on internal memory or USB key Weight :15 Kg Dimensions:(WxHxD) 537 x 157 x 381 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

TREAD MEASUREMENTS IN SECONDS The Tire Tread Depth Gauge is an add-on accessory for the VT56 OBD2 Diagnostic TPMS Tool. The accessory allows a technician to measure tire tread depth with high accuracy when checking TPMS sensors during routine service and maintenance checks. In one simple gesture, it can detect worn tires, tire damage and indicate poor alignment. A quick vehicle safety check An additional service and tire sales opportunity Ideal for tire management: records tire condition before and after storage Quickly captures 3 tire measurements (inner, center, outer) Measures with an accuracy of +/-1% + 0.0012 inches (0.03 mm) Measures 4 to 7 wheels per vehicle Green, yellow and red color codes on VT56 tool screen indicate wear Automatic calibration checks before every use PN:TD01-0000

Receive monthly updates on your VAS 741 099 TPMS tool with the annual software subscription including the latest and greatest features and coverage. The latest software update subscription also includes new tool functionalities, procedures, corrections, vehicle coverage, sensor coverage and more New vehicle and OE/Aftermarket sensor coverage added each month Access to new features & functions Subscribe to receive a tech release email for each release Update the tool as many times as needed with the annual subscription PN:SW56-0001

CHARGE & GO The VT56 docking station houses the VT56 tool, printer and optional sensor for testing. The accessory allows the user to charge the VT56 and printer wirelessly. The docking station can be mounted to a wall or service station for easy access. Houses and charges VT56 tool Slot for printing with optional Printer accessory Slot for TPMS sensor for sensor programming Wall mountable PN:T1006305 (w/Printer)

The Smart Charge 5 is a fully automatic, custom configurable evacuation and tracer gas backfill system with built-in gross leak test. The system is ideally suited for pre-charging of product with tracer gas, such as Helium, Hydrogen or others prior to the leak test processes. It can also be used with any gas charging application that requires evacuation and subsequent pressurization of a test product. Base unit performs evacuation (25″ Hg), vacuum decay test and tracer gas backfill to 700 psig. Units can be configured to perform evacuation to lower vacuum levels. Recipes to include up to 10 leak locations, with user configurable dwell at each site Serial printer output Data logging over Ethernet Graphical user interface witch color touch screen 2 inputs; 2 outputs available for external use such as for fixture clamping, etc. Password protection prevents unauthorized access Built-in gross leak test eliminates tracer gas saturation Dimensions (WxHxD):344 x 395 x 618 mm 13.5″ x 15.5″ x 24.4″ inches Power:Universal Voltage 110 vac or 220-Volt AC

Without any doubt the smallest high-performance continuous flow tester on the market. Specially adapted for automatic or semi-automatic test machines, the G620 has a full range of specifications at a very competitive price. Continuous flow tester may help operators find leak locations and repair them. Automotive, small volume parts, injection rails, filter caps, gaz industry, cookers, gas float, heat exchangers for boilers, taps Continuous flow leak detection 128 programs 2 flow measurement ranges full sacle : 100 or 1000 cm3.atm/h Measurement flow returned to standard conditions Calculation of the test part volume Setting on line (via USB) Automatic start 2 languages (English + other one) Manual calibration on front panel with calibrated leak Data storage on internal memory or USB key Weight:7 Kg / 14lbs Dimensions:(WxHxD) 250x150x360 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

On the basis of its well proven concept of production line QC Testers, ATEQ has developed a new leak tester designed for the specific requirements of high volume production of plastic parts. This instrument is used for the detection of localized moulding faults, insufficient membrane thickness, perforations, etc. This instrument has also proven to be effective on testing pouch battery cells. The IONIQ is based on discharge current measurement and is able to detect defects up to of 10µm. Battery pouch cells, plastic bottle caps, plastic packaging, plastic coveringsThe IONIQ measures the current flowing between a patented charged probe and a ground plate placed under the part to be tested. The IONIQ uses the % of the nominal voltage (which reflects the discharge current), measured on the part as PASS/FAIL level. In a PASS situation (fig 1) : No hole, no weak part, the IONIQ measures a high %. The measured voltage and the nominal voltage are virtually equal. Operating:+ 10°C at + 45°C Storage:0°C at + 60°C Single phase:50/60 Hz – 45 W Weight:9.4 kg Dimensions:H x L x P = 250 x 250 x 60 mm

The H6000, a new comer in the ATEQ range of leak detectors, is one of the finest gas tracer and hydrogen leak detectors on the market today. This gas is less expensive than Helium gas. Furthermore, it’s a volatile, non-toxic and non-poisonous gas with any environmental impact. The H6000 is equipped with all features for easy integration in industrial process and laboratory one. utomotive: leak localization, cooling systems, alloy wheel, … HVAC, Refrigeration and Automotive Leak Detection Domestic Appliances: compressor, … Generated Suction Flow control Internal memory: 2 Go Visual (red/green leds) and audible signal for results USB port Bag for H6000 H6000 fixed Voltage 60 W – 50/60 Hz – 90/260 V AC Relay board 5 inputs/ 7 outputs H6000 portable (autonomy 8 hour) lithium battery 12 VDC – 4400 mA/h Easy removable battery pack Supplied with 2 batteries Detection of leaking gas traces Range: 1.10-4 mbar l/s to 2.10-2 mbar l/s 128 programs IP 54 protection Weight:Approximately 3 Kg (H6000 + snifer) Dimensions:(in mm) – W 577 x H 157 x D 381 Operating:+ 10°C at + 45°C Storage:0°C at + 60°C

The F28 LP pressure decay or vaccum decay instrument is the latest addition to ATEQ’s new range : F28. It’s a high peformance, low cost, quality leak tester. Its small packaging enables to mount it near the test part insuring the best measurement conditions. You can easily program and supervise it our super friendly interface: F28 demo. Packaging, blister, watch, mobilephone, pneumatic and hydraulic fittings Pressure decay leak measurement: vacuum to 20 bar Smart pressure regulation without regulator – auto fill (optional) Electronic regulation (optional) Units: Pa, Pa/s, sccm Compact dimensions (overall (mm): h 141.5 x L 225 x D 97) Mechanical or electronic regulator from vacuum to 10 bar Integrated fill and dump valves Ethernet network up to 50 modules (Modbus IP) DIN rail mounting Environment: ROHS standard Weight :around 3.5 Kg Voltage:24 V DC / 1.6 A Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

Without any doubt, the smallest high-performance flow tester on the market (240 parts/min). Specially adapted for automatic and semi-automatic test machine, the D26 Speed has a full range of specifications at a very competitive price. Valves, lighter, pneumatic and hydraulic fitting Continuous flow measurement Flow rate 500 l/h – 2 bar (other range possible) Wide range of measurement 8 programs Set up on line via USB port Recalculated flow at the nominal pressure Air operation or in gas 0-10V analog output Controllable auto-zero I/O TOR Compact enclosure (h 163 x l 88 x P 85) Flexible mounting styles ROHS standard Weight :1.5 Kg Dimensions:(WxHxD) 163x88x85 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

After 46 years, and 275,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its revolutionnary flow tester: D6 Class. New electronic module, new measurement module, new interface, new accessories… All has been made to improve your quality control. And yet, inside can be found the latest leak testing technics and technology that will garantee you the fastest and most accurate leak testing cycle on the market. FLOW CONTROL cookers, ovens, valve, gas taps, gas burners, lighters… LEAK DETECTION Valve seats, gear boxes, hydraulic components, motors,,, CONTROL of aerosols, injectors Flow measurement in direct or indirect testing Continuous measuring mode Wide flow measurement range USA, S.I. and customer units Measurement in standard or customised conditions Recalculated flow at the nominal pressure Measurement element fully integrated into one module 128 programs Mechanical or electronic regulator from vacuum to 10 bar Weight :7 Kg Dimensions:(WxHxD) 250x150x360 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

Ideal for rework stations on EV vehicle production lines, the EVB 5100 Battery Module Balancing Machine uses the most efficient technologies to equalize voltage differences between modules. Its wide operating range and customization capabilities makes the EVB 5100 compatible with all EV/HEV batteries on the market. Battery balancing (charging, discharging) and temperature monitoring for EV/HEV modules Wide balancing range: In charge 60V-50A/150V-20A in discharge max 3000W Easily configurable target values, voltage and current thresholds Cloud-based platform for data collection, real-time monitoring and reporting Monitoring connectors perform voltage/temperature surveillance of each internal cell Integrated module database for easy reference selection Automated security checks for fully secure operation and shut down in case of anomaly Futureproof: exchangeable power charger modules and connectors Worldwide support through ATEQ subsidiaries and local agents in 37 countries Weight:145Kg Dimensions:(WxHxD) 310x1051x695 mm Voltage:100 – 240 V, 50/ 60 Hz Consumption:2kW Max. Operating:0°C to 40°C

TPMS Activation Tool for Trucks and Buses The ATEQ VT TRUCK offers functionalities specifically designed for maintenance of trucks and buses. With its sturdy and compact design, the tool can easily read sensors, even in twin wheels, and has the ability to manage up to 22 wheels. The tool is compatible with most truck and bus TPMS sensors and can be frequently updated with new heavy transport vehicles as soon as they are introduced. Ideal for fleet management and heavy vehicle maintenance Manages and stores up to 22 wheels Checks tire pressure to prevent under-inflation and reduce vehicle down-time Activates TPMS sensors of major truck and bus brands Displays all sensor data: ID, tire pressure, tire temperature, Displays all sensor data: ID, tire pressure, tire temperature, battery status etc. Identifies the sensor by vehicle, by sensor reference or simply scan all protocols to activate Provides easy access into the wheel arch and twin wheel configurations PN:VTTRUCK

The He-490S is the leader among portable tracer gas leak detectors. With a response time less than 0.5 seconds, sensitivity to 10-8 direct reading atm-cc/sec, and the ability to zero-out background, this is the most aggressive portable leak detector in the industry, with advanced features designed specifically for industrial applications. The He-490S can be integrated with our Smart Charge 5 evacuation and backfill station. Fastest response time in the industry (less than 0.5 seconds) Helium background suppression Maintenance free, dry pump Sensitivity to 5 x 10-8 atm cc/sec Less than 3 minutes total start-up time Fully automatic calibration sequence with built-in 10-5 atm cc/sec gas leak Front panel key lock-out Sealed membrane keypad Fully interactive system diagnostics with multilingual displays High output (110dB) adjustable audio alarm Sensitivity: Smallest detectable helium leak rate 5 x 10-8 atm cc/sec Measuring Scale: 7 decades Weight:70 lbs / 31.8 kg Dimensions:(WxHxD) 344 x 395 x 618 mm / 13.5″ x 15.5″ x 24.4″ Operating:32F to 115F / + 0°C to + 46°C Storage:32F to 140F / + 0°C to + 60°C

The CDP60 calibrator checks the pressure calibration of leak and flow measurement instruments as well as any other pressure measuring instrument. This light, compact and user friendly calibrator is essential for field or laboratory checks, when accuracy and repeatability cannot be compromised and large instrument are too bulky or too expensive. With the CDP, you can now easily check and follow the requirements of ISO or other quality standards. Pressure Calibration checking on Leak and Flow testers Checking of other types of pressure measuring instrument Automatic sleep mode Print out (USB or RS232) Battery level check LCD display (4 x20 characters) 1 year warranty Accessories : Carrying case, pressure generator (1000 Pa), pocket, protective holster. Operating:+ 10°C at + 45°C Storage:0°C at + 60°C