Produse pentru testează (86)

Maintenance-expertise Batteries - Aeronautics testing

YEARLY SUBSCRIPTION Receive monthly updates on your VT36 TPMS tool with the annual software subscription including the latest and greatest features and coverage. The latest software update subscription also includes new functionalities, corrections, vehicle coverage, sensor coverage and more New vehicle and OE/Aftermarket sensor coverage added each month Access to new features & functions Subscribe to receive a tech release email for each release Update the tool as many times as needed with the annual subscription PN:SW36-0001

SUMMER/WINTER TIRE TPMS RESET TOOL The ATEQ Quickset X TPMS Reset Tool is designed to scan vehicle sensors and reset the TPMS system. The Quickset X is the successor to the well-known Quickset TPMS reset tool. The tool can be used for swapping summer/winter tires, resetting a TPMS system after programming new sensors, or after rotating tires. The procedure is straightforward; simply select the vehicle’s make, model, and year, then scan each sensor in the wheel. Once all sensors are scanned, plug in the OBDII Quick Connector into the vehicle’s ECU and press OK. Reset TPMS systems in three easy steps Includes both OBDII and Manual relearn functionality Performs TPMS relearns via the OBD Quick Connector Easily swap summer and winter tires with a single tool Reset the TPMS system after installing new sensors or performing a tire rotation Improved designed with an icon-based, color screen Dedicated website for updates, videos, and support. (QUICKSETX.COM) PN:QUICKSET-X

On the basis of its well proven concept of production line QC Testers, ATEQ has developed a new leak tester designed for the specific requirements of high volume production of plastic parts. This instrument is used for the detection of localized moulding faults, insufficient membrane thickness, perforations, etc. This instrument has also proven to be effective on testing pouch battery cells. The IONIQ is based on discharge current measurement and is able to detect defects up to of 10µm. Battery pouch cells, plastic bottle caps, plastic packaging, plastic coverings The IONIQ measures the current flowing between a patented charged probe and a ground plate placed under the part to be tested. The IONIQ uses the % of the nominal voltage (which reflects the discharge current), measured on the part as PASS/FAIL level. In a PASS situation (fig 1) : No hole, no weak part, the IONIQ measures a high %. The measured voltage and the nominal voltage are virtually equal. Operating:+ 10°C at + 45°C Storage:0°C at + 60°C Dimensions:H x L x P = 136 x 250 x 255 mm Weight:8 kg

After 46 years, and 275,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its revolutionnary flow tester: D620. New electronic module, new measurement module, new interface, new accessories… All has been made to improve your quality control. And yet, inside can be found the latest leak testing technics and technology that will garantee you the fastest and most accurate leak testing cycle on the market. Automotive, domestic appliances, medical, aeronautic, defense, fluid and electrical components, food and cosmetic packaging Flow measurement in direct or indirect testing Continuous measuring mode Wide flow measurement range USA, S.I. and customer units Measurement in standard or customised conditions Recalculated flow at the nominal pressure Measurement element fully integrated into one module 128 programs Mechanical or electronic regulator from vacuum to 10 bar setting on line (via USB) 2 languages (English + other one) Weight:7 Kg Dimensions:(WxHxD) 250x150x360 mm Voltage:24 V DC/2A or 100 – 240 V AC/50W Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

The F28 LPV or vacuum decay instrument is the latest addition to ATEQ’s new range: F28. It’s a high peformance, low cost, quality leak tester. Its small packaging enables to mount it near the test part insuring the best measurement conditions. You can easily program and supervise it our super friendly interface : F28 Control. Packaging, blister, watch, mobilephone, pneumatic and hydraulic fittings Pressure decay leak measurement: vacuum Water leak detection by evaporation under strong vacuum Smart pressure regulation without regulator – auto fill (optional) Electronic regulation (optional) Units: Pa, Pa/s, sccm, μg/min of H2O Compact dimensions (overall (mm): h 141.5 x L 225 x D 97) Integrated fill and dump valves Ethernet network up to 50 modules (Modbus IP) DIN rail mounting Environment : ROHS standard Weight :around 3.5 Kg Voltage:24 V DC / 1.6 A Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

TPMS Diagnostic, Trigger, and Programming Tool As the successor to the VT36, the brand new VT37 is the ideal tool for DIYers, technicians and front counter workers. The tool is designed to activate, read and service all major OEM & aftermarket sensor brands, as well as perform vehicle-specific TPMS relearn procedures. Constant Live Sensor and quarterly updates allow for the newest TPMS sensors to be added to the tool effortlessly. Whether it’s stored in a glove compartment or toolbox, the VT37 is the perfect partner for servicing TPMS. Activate and display all sensor data in seconds: ID, tire pressure, tire temperature, and battery status etc. Comprehensive make, model, year specific relearn procedures, with instructions, built-in Activate, read and service all major OEM & aftermarket sensor brands Program over 20 aftermarket sensor brands Search TPMS sensor replacement part numbers Test vehicle keyfob signal strength/battery status PN:VT37-0000

Pressure? Check. The TPMS Sensor Check Box pressurizes a TPMS sensor to simulate in-tire condition before sensor installation or during bench testing. The box helps to identify gaps in readings between the tire filling gauge and the TPMS sensor. It is used in conjunction with a tire filling gauge. Test sensors for defects before mounting to the wheel For laboratory bench testing or check-up in workshop environment 1 - Place sensor into slot 2- Close lid, secured by latch 3 - Fill box with pressure 4 - Trigger sensor with a TPMS scan tool PN:VB01-0000

The ATEQ F5800 in its industrial format (19″ 3U) is the easiest leak detector to operate and integrate into manufacturing operations. Its comprehensive specifications, including ATEQ’s latest developments in pressure decay technology, make it an extremely versatile instrument. The F5800 offers a touchscreen graphical interface to combine great functionality with simplicity of use with simple and intuitive menu-driven operator controls. AUTOMOTIVE Shock absorbers, gearboxes, tank caps, carburettors, non return valves, cylinder heads, filters, radiators, seals, cylinders, engine oil and water circuits… DOMESTIC APPLIANCES Bottles, percolators, cookers, steam irons, ovens, washing machines… MEDICAL Catheters, dialysis equipment, micropipettes, plastic taps, drain bags, syringes, valves… PACKAGING Aerosol cans and valves, trigger pumps, ink cartridges, cosmestic bottles, food sachets Differential pressure decay leak measurement Large ranges of leak measurement (ΔP) F.S. : 50 Weight :15 Kg Dimensions:(WxHxD) 537x381x157 mm Operating:+ 5°C to + 45°C Storage:0°C to + 60°C

MULTI-RANGE LEAKAGE CALIBRATOR The CDF7000 allows you to check the calibration of leak and flow measurement instruments, as well as calibrated leaks and jets. This portable, compact and user-friendly instrument lets you adjust very accurately your leak or flow rate with a real time reading on the display. You can now guarantee the quality of your products, whilst also complying with the requirements of standards such as ISO 9001. Measurement in actual or standard conditions Different displays available (bargraph – curves) USA / SI units New ergonomy User-friendly interface Easy connection to the test instruments Time and date function Print out (USB or RS232) Improved resolution compared to previous CDF More than 8h battery lifetime Strong carry case Can be used for field as well as laboratory checks Weight:Approximately 5 kg Without handle (in mm):H 215 x D 170 x L 220 Operating:+5° C to +45°C Storage:0°C to +60°C

Handheld Industrial TPMS Tool The VT65 is a handheld industrial TPMS engineering tool for manufacturing facilities, on assembly lines and rework stations, or when preparing vehicles for export or domestic dispatch. Built to meet OEM specifications and requirements, it features TPMS sensor activation and TPMS sensor state manipulation functions, for production and testing. Wi-Fi or Bluetooth connectivity permits to wirelessly transmit TPMS sensor IDs to a local PC or to the factory network for central data processing. Data can also be transferred via OBD directly to the vehicle’s ECU. The VT65 can be configured with a LF Antenna Extension. Its ergonomic long nose design delivers easy access to all controls and outstanding operating comfort as it prevents bad postures, making technicians work easier and more efficiently. The interface is simple to use, to avoid any involuntary manipulation.

All-In-One TPMS & Tire Management Tool The VT56 is the all-in-one comprehensive TPMS tool with coverage for American, European, and Asian vehicles. Its advanced features and functions provide complete TPMS management. Thanks to frequent updates, it includes all new TPMS sensors and vehicles, immediately when introduced each year. Select make, model, year via VIN scan Comprehensive make, model, year specific relearn procedures Programs all leading aftermarket programmable sensors TPMS reset via OBD2 on more than 80% of car models Retrieve/Clear TPMS DTC codes Placard Adjustment Trailer TPMS Relearning TPMS sensor part number look-up (OE and aftermarket) ECU unlocking for Toyota family of vehicles Tire Tread Depth functionality (Accessory Sold Separately) PN:TS56-1000

YEARLY SUBSCRIPTION Receive monthly updates on your VT56 TPMS tool with the annual software subscription including the latest and greatest features and coverage. The latest software update subscription also includes new tool functionalities, procedures, corrections, vehicle coverage, sensor coverage and more. New vehicle and OE/Aftermarket sensor coverage added each month Access to new features & functions Subscribe to receive a tech release email for each release Update the tool as many times as needed with the annual subscription PN:SW56-0001

Without a doubt, the B28 is the smallest high-performance leak tester for battery cells and breathable membranes. One of the main advantages is that our B28 module can quickly test the cell’s insulation. To ensure the best measurement conditions, the B28 has the optional capability to control filling and dumping vacuum around the part to test in a specific enclosure. You can daisy chain up to 50 modules and monitor them with a touch screen panel and our user-friendly interface: B28 control. Leak measurement using air ionization method (I max<1 mA) Compact size External vacuum source Integrated fill and dump valves Ethernet network up to 50 modules (Modbus IP) DIN rail mounting Environment: ROHS standard A high voltage loaded sharp end is applied next to an earth connected base and in between lays the plastic part we test. Weight:approx.3.5 Kg Dimensions:(overall (mm): H 155.5 x L 97 x D 229.5 Operating:+ 5°C to + 45°C Storage:0°C to + 60°C Voltage:24 V DC / 1.6 A

F670LV is a breakthrough instrument able to leak test very large volumes using a new patented technology (Based on Pressure Decay) thanks to the high sensitivity of our latest pressure transducer. By using ATEQ’s F670LV Differential Pressure Decay leak Tester with DNC, it is now possible to detect pressure drops below 0.1 Pa/sec. Parts with very large volumes such as tanks, electrical car batteries… An EV battery housing is a great application for ATEQ’s new DNC leak testing technology since it is a large, flexible component that is easily affected by variations in background noise. 128 programs Large Flow Valves for fast management of the parts Fully integrated electronics and pneumatics Flexible communication format: RS232, USB Weight:35 Kg Dimensions:(WxHxD) H295*W520*D550 Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

Without any doubt the smallest high pressure leak detector on the market. The F600 HP is equiped with the technical innovations of the 6 series and allows high pressure leak testing at a very competitive price. Catheters, refrigeration parts, oil radiators, HP tubes and pipes, valves, hydraulic brakes Pressure decay leak testing from 5 to 1000 kPa Range of measurement from 20 to 175 bar 128 programs Mechanical regulation 2 MPa/ 5 MPa/ 10.0MPa/ 17.5 MPa Electronic regulation 4 MPa Flow units (sccm, mm3/s, cm3/s, cm3/min, cm3/h…) Desensitized Test and others, depending on your applications Weight :7 Kg Dimensions:(WxHxD) 250x150x360 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

ATEQ inovates in the measurement industry with this new instrument: the MF520. It associates speed with accuracy of leakage measurement through differential pressure drop measurement and flow measurement stability. Leak detection and flow control: valve seats, gear boxes, hydraulic components, motors, control of aerosols, injectors Measurement range: 2 / 20 / 200 ml/min Measurement units: SI, USA (SAE) and custom unit Indications of the ambiant temperature and atmospheric pressure Measurement element fully integrated into one module Normes ROHS RS232: printer, P.C. and memory modules RS232: intelligent RC5 remote control RS485: ATEQ network Weight:Approximately 7 Kg Dimensions:(WxHxD) 250x150x360 mm Operating:+10°C at + 45°C Storage:0°C at + 60°C

All-In-One TPMS & Tire Management Tool Introducing the all-new VT57 with a brand new touchscreen interface, 100% OEM sensor diagnostic coverage, 90% OBD coverage, tire tread depth capturing, “Sync-ID” OBD technology and much more. Constant Live Sensor updates and the ability to connect Wi-Fi to ensure that the VT57 has the latest coverage available. All-new updated user interface Touch-screen capability Comprehensive make, model, year specific relearn procedures Programs all leading aftermarket programmable sensors WiFi & real time updates, powered by Live Sensor™ TPMS reset via OBD2 on more than 90% of car models Retrieve/Clear TPMS DTC codes DOT Recording TPMS sensor part number look-up (OE and aftermarket) ECU unlocking for Toyota family of vehicles Tire Tread Depth functionality (Accessory Sold Separately) PN:TS57-1002 (w/OBDII)

CLICK HERE TO VIEW THE FULL INDUSTRIAL TPMS EQUIPMENT CATALOG

WIRELESS THERMAL PRINTING The wireless IR thermal printer allows the user to print detailed information about TPMS sensors and tire tread depth. This allows shops to print information for record keeping and/or for the customer. The printer charges within the docking station accessory for the VT56 tool. Print detailed information including: Customer and Vehicle Information TPMS Sensor IDs Tire Pressure Temperature Sensor Battery Life Tire Tread Measurements PN:PRIR-0000

λ/10 mirrors are used in the aerospace environment due to the vibration - Knight Optical can offer you stock and custom lambda/10 mirrors for use in government testing for aerospace, in a range of materials such as BK7 or equivalent, Zerodur, Quartz, UV Fused Silica and many more. Mirrors are made from low expansion glass for optimum stability to maintain the lambda/10 flatness. The mirrors help produce high quality images and can be coated with a variety of coatings to ensure that the perfect quality image in the wavelength you require is achieved: Enhanced aluminium 94%R for visible applications. 99.9% dielectric for laser use in visible applications. UV aluminium for UV applications down to 180nm. 98.5% dielectric for laser use in the NIR applications. Ion plated silver for NIR-2000nm applications. Protected gold for 750nm to far infra-red applications λ/10 mirrors are used in the aerospace environment due to the vibration, temperatures & pressure through which they are exposed. To Find out More read the PDF Material::Soda lime float glass Diameter::+0 / -0.2 mm Length/width::±0.1mm Thickness::+0.1 / -0.2mm Surface quality::<40:20 scratch/dig Flatness::λ/10 over 90% of mirror aperture (Rear is commercial polish)

Schrader Sensor Activation Tool The VT6 activates Schrader TPMS sensors to assist in resetting TPMS systems. The VT6 sends an RF signal to the TPMS sensor mounted to the vehicle’s wheel to “wake up” the sensor. Once the tool triggers the sensor, the sensor is ready to communicate with the vehicle’s ECU. While holding the tool over the valve stem, press the button to activate the sensor. The tool will blink during this process. Continue to hold the button down until successful signal transfer to the vehicle’s ECU or until the vehicle’s horn “beeps” PN:VT6

> Click on the "WEBSITE" link for more > Once our Transport Consulting Team have completed the preliminary planning for your heavy transport project, a test drive of the proposed abnormal load route can be undertaken. Used for wind turbine components and abnormal loads, these heavy transport test drives provide a detailed route analysis to show areas where route modifications are required to enable the passage of the proposed vehicle and load. The loaded vehicles simulate the correct dimensions of the abnormal loads, as would be required for the actual movement and any projections either in length, width or height are assembled to the trailer. All projections are designed to allow for easy modifications and reduction in size if required whilst on the public roads, this allows for quicker and smoother manoeuvrability reducing the impact on other road users.

After 46 years, and 275,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its new leak tester: F6CLASS. New electronic module, new measurement module, new interface, new accessories… All has been made to improve your quality control. And yet, inside can be found the latest leak testing technics and technology that will guarantee you the fastest and most accurate leak testing cycle on the market for an entry level tester. Automotive, domestic appliances, Medical, aeronautic, defense, Fluid and electrical components, food and cosmetic packaging, Mobile and wearable electronic devices Differential pressure decay leak measurement 16 programs Setting on line (via USB) 2 languages (English + other one) Manual calibration on front panel with calibrated leak Data storage on internal memory or USB key Weight:7 Kg Dimensions:(WxHxD) 254x150x170 mm Overall dimensions:(WxHxD) 254x150x256 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

The CDF60 calibrator checks the calibration of leak and flow ATEQ instruments as well as any other instrument. This light, compact and user friendly calibrator is essential for field or laboratory checks, when accuracy and repeatability cannot be compromised and large instrument are too bulky or too expensive. With the CDF60, you can now easily check and follow the requirements of ISO or other quality standards. Atmospheric pressure and temperature indicators Automatic sleep mode Print out (USB or RS232) Battery level check LCD display (4 x 20 characters) 1 year warranty Accessories: Carrying case, needle valve, soft case, protective holster Operating:+ 10°C at + 45°C Storage:0°C at + 60°C

TPMS Sensor Activation and Programming Tool The VT36 TPMS programming tool offers functionality and flexibility at an affordable price. Its rugged casing and durable rechargeable battery is designed for tough service station environments. Thanks to frequent updates, the newest TPMS sensors and vehicles are introduced each year. Comprehensive make, model, year look-up Displays TPMS sensor data (ID, tire pressure, tire temperature, battery status, frequency) Reads and activates all known TPMS sensors Programs all leading aftermarket programmable sensors TPMS sensor part number look-up (OE and aftermarket) Multi-lingual, 23+ languages Worldwide TPMS technical support PN:VT36-0000

After 46 years, and 275,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its revolutionnary valves tester ERD620. New electronic module, new measurement module, new interface, new accessories… All has been made to improve your quality control. The purpose of the instrument is to generate a pressure ramp and is waiting for an event as a flow appears (ex: valve opening). A ramp down can also detect when valve is closed. The instrument will display the event pressures and compare them to reject levels. As an option the flow event can be replaced by a dry contact event. FLOW CONTROL Opening valves, closing valves with flow detection… LEAK DETECTION Leaking levels with flow detection… CONTROL Pressure contact elements… Flow measurement in direct or indirect testing Wide flow measurement range USA, S.I. and customer units Measurement in standard or customised conditions Recalculated flow at the nominal pressure Measurement element fully integrated into one module Weight:8 Kg Dimensions:(WxHxD) 250x150x360 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

LIGHT TPMS RESET TOOL The Quickset Light TPMS Reset Tool is the ideal tool for the DIYer who wishes to reset the TPMS light himself, after having changed or rotated tires, or replaced a dead TPMS sensor. This simple TPMS relearn tool transfers the new TPMS sensor ID’s into the vehicle’s ECU (Electronic Control Unit). The Quickset TPMS reset tool can store two sets of wheels for each car (summer and winter tires) and is limited to four cars. Obtain wheel sensor ID’s from a TPMS tool such as a VT56 or VT37 or from a tool workshop. Switch summer and winter tires Print TPMS data for personal or customer use on PC Resets TPMS through OBDII Cable Fully updateable via PC PN:OBD3-0000

After 46 years, and 275,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its revolutionary leak tester : F610. This instrument is particularly suitable for polluted workplaces (dust, oil, etc.). New electronic module, new measurement module, new interface, new accessories… All has been made to improve your quality control. Inside is the latest leak testing technology that will guarantee you the fastest and most accurate leak testing cycle on the market. Automotive, domestic appliances, medical, aeronautic, defense, fluid and electrical components, food and cosmetic packaging… Differential pressure decay leak measurement. Use in pressure and vacuum Large range of leak measurement (ΔP) F.S. : 50 Pa, 500 Pa or 5000 Pa Mechanical or electronic regulator from vacuum to 20 bar 128 programs Setting on line (via USB) 2 languages (English + other one) Manual calibration on front panel with calibrated leak Data storage on internal memory or USB key Weight:10 Kg Dimensions:(WxHxD) 380 x 287 x 120 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C

After 47 years, and 275,000 testers installed in more than 5,000 customers worldwide, ATEQ presents its revolutionary leak tester range : the F6 series including a compact leak tester F620, a weatherproof leak tester F610 and the F670 in its 19″3U industrial format. New electronic module, new measurement module, new interface, new accessories… All has been made to improve your quality control. And yet, inside can be found the latest leak testing technics and technology that will garantee you the fastest and most accurate leak testing cycle on the market. Automotive, domestic appliances, medical, aeronautic, defense, fluid and electrical components, food and cosmetic packaging Differential pressure decay leak measurement Large range of leak measurement (∆P) F.S.: 20Pa, 50 Pa, 500 Pa or 5000 Pa Mechanical or electronic regulator from vacuum to 20 bar 128 programs Setting on line (via USB) 2 languages (English + other one) Weight:7 Kg Dimensions:(WxHxD) 250x150x360 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C