Produse pentru testează (609)

SOL - Manuelles Vision Messsystem Die SOL Messsysteme sind manuelle Vision Messgeräte für kleinere Teile. Die Micro-Vu Sol ist unser günstigstes optisches 3D-Koordinatenmessgerät mit hoher Genauigkeit. Mit ihrem manuell bewegten Messtisch und programmierbaren Motor-Zoom und Licht schließt sie die Lücke zwischen manuellen und automatischen Mess-Systemen. Die Teileprogrammkompatibilität mit unseren CNC-Modellen machen die Sol zum fortschrittlichsten Gerät seiner Klasse. Egal ob Längenmaße, Rundheiten, Positionsgenauigkeit oder Bohrungstiefen, mit der Micro-Vu Sol und der dazugehörigen InSpec Mess- und Auswertesoftware werden komplexe Prüfanforderungen nach Form und Lage zum Kinderspiel. Die grafische Visualisierung und der automatisierte Datenexport ersetzen Ihren Messschieber und Profilprojektor. Erhältlich in verschiedenen Größen. Messbereich XYZ (mm): 315 x 315 x 160

Wenn Chloridsalze vor dem Aufbringen der ersten Beschichtung auf der Oberfläche verbleiben, kann sich die Beschichtung durch Korrosion vorzeitig von der Oberfläche lösen. Um sicherzustellen, dass keine Chloridrückstände verbleiben, muss die Oberfläche vor dem Beschichten unbedingt geprüft werden. Elcometer 134S Testverfahren: Ein Latexbeutel wird mit Chlor*Rid- Extraktionslösung gefüllt und auf die Prüffläche angebracht, wo die Lösung zur Salzextraktion in die Oberfläche eingearbeitet wird. Die Bürette wird eingetaucht und die Ergebnisse können aufgezeichnet werden.

Das PTG8 ist das Spitzenmodell dieser Produktreihe und bietet sämtliche Merkmale und Funktionen zur präzisen Messung der Materialdicke an praktisch jedem Material.

4 Profilsemente pro Vergleichsscheibe Mit diesen extrem haltbaren Vergleichsscheiben lässt sich die Oberflächenrauheit von mit Kugeln oder mit Schrot bestrahlten Oberflächen annähernd bestimmen. Das Oberflächenprofil wird dabei mit den vier Referenzsegmenten der jeweiligen Elcometer 125 Oberflächenvergleichsscheibe verglichen. Profile werden in µm aufgezeichnet. 4 Profilsegmente pro Vergleichsscheibe. Beschreibung: schrotgestrahlte Oberfläche Segmentprofile: 25, 60, 100, 150 µm

Excel Multisensor-Messzentren sind zuverlässige und kostengünstige Messsysteme in der Gantry-Bauweise mit hoher Geschwindigkeit und Präzision.

The TorqueStar Pro is the most complete and fully equipped torque indicator and data collector in the new TorqueStar range. The TorqueStar Pro takes all of the features and benefits of the Plus model but with the addition of more advanced measurement modes, graphical analysis, statistics and connection capabilities. The TorqueStar Pro offers measurement modes including track, peak, pulse, click, audit, move-on, retighten and yield giving a complete range of data to measure and collect. The Pro offers the ability to add ‘jobs’ and ’rounds’; specific predefined tightening requirements for a series of fastening applications, in a specific assembly process. In addition, the TorqueStar Pro offers more advanced statistics and the ability to view and collect real-time torque traces which can be analysed and reviewed as they are recorded. Added RF communication capabilities also allow the TorqueStar Pro to connect to our series of WrenchStar Multi digital torque wrenches and our [...

Digitale Stromzange 400A AC TRMS mit Oberwellen, Leistungs- und Energiemessung

Digital Power Tool Tester with Pulse Counter Management of tightening screws begins on checking fastening tools. YET testers are designed for high precision torque control of mainly impulse type tightening tools. Also usable for angle nutrunners, screw drivers, ratchet wrenches etc. However impact wrenches can be tested also, you should not exceed approx. 2/3 of the testers rated capacity. Install the YET torque tester in a tool maintenance shop, test laboratory, or at production lines for effective control of fastening such as acceptance inspection, periodical check and torque adjustment. YET torque testers feature a parallel centronics printer port and a serial RS-232C computer interface enabling simultaneous protocol as well as external data recording. Key Features: High accuracy within R.O. ± 0.5 % (stat. Load) Large digital display (LED) Measuring time can be set by every 0.1 sec within 9.9 sec. Shut-off time can be set 1-2-3 sec.

Torque Readout with built-in Transducer. The basic, easy-to-use readouts include a built-in torque transducer and has a variety of measurement modes including track, peak, pulse and click. The ReadStar TT can be used as a portable device or fixed permanently using the mounting bars. The new and improved torque tester incorporates a bigger and clearer OLED screen display to view readings and results and the redesigned, easy to use keypad offers a familiar feel with simple function keys to effortlessly switch between modes and settings. The new internal memory now allows for a massive 999 readings to be stored and the addition of a new micro USB port allows for a wider range of connections for printing and exporting data. The new port also allows for additional power options. The ReadStar TT is supplied with a built-in transducer and a standard rundown adapter, and is available in 0.5Nm, 1Nm, 4Nm, 12Nm and 30Nm ranges. A premium joint kit is also available, sold seperately.

Messleitungssatz, farbig, 5 x 2m, beidseitig mit stapelbarem Sicherheitstecker Messleitungset: 5 Messleitungen je 2 m, beidseitig mit stapelbarem Stecker in den Farben schwarz, rot, blau, braun, grün-gelb, CAT IV 600 V, PVC, 1 mm², max. 20 A

Das FTBx-735C ist ein hochauflösendes OTDR-Modul, konzipiert für Tests an Metro- und Corenetzen und zur nahtlosen Charakterisierung von Splittern in FTTx- und MDU-Anwendungen von PON-Netzen. Leistungsmerkmale: - Dynamikbereich bis 42 dB - Ereignistotzone von 0,6 Meter und Dämpfungstotzone von 2,5 Meter - Test durch Splitter mit hoher Portzahl (bis 1x128) - Singlemode-Port für Fehlerdiagnose während des Betriebes mit integriertem 1490/1550 nm Leistungsmesser - Kompatibel mit EXFO Connect: Automatisches Ressourcen-Management über die Cloud mit dynamischer Datenbank - iOLM-ready zur vollautomatischen OTDR-Messung mit nur einem Klick, ja/nein-Resultate werden in einem überschaubaren visuellen Format präsentiert Einsatzgebiete: - FTTx/MDU Testanforderungen in PON-Netzen - Metro-Core-Netzwerk-Tests (P2P)

Digital torque wrench tester with manual loader. Ideal for torque wrench calibration and adjustment. Pole holder and plate are equipped on all models, which helps keep wrenches in optimal testing position. Peak/Run modes with 10 customizable hi/lo judgment patterns. Colour Judgement Display makes it easy to confirm readings are within your set parameters. Up to 1000 measurement data items can be stored in the memory. Global units of measure selection by keypad: cNm, NM, kgf.cm, kgf.m, lbf.in, lbf.ft. Sample quantity, maximum value (Hi), minimum value (Lo) and mean value can be displayed. Includes Calibration Certificate: ILAC MRA. CE markings applied for use in the EU. [...]

The TorqueStar Lite is the latest basic torque data collector in the revolutionary TorqueStar series, offering a simple and easy-to-use solution for the measurement and collection of torque data. The TorqueStar Lite is ideal for users who want a quick and straight-forward ‘plug-and-play’ product with the added precision that the Crane Electronics brand guarantees. The clear and sharp OLED screen on the TorqueStar Lite enables easy-to-view data and statistics. It also has an added screen-saving ability to ensure there is no screen burn-in damage. The easy-to-use function keys offer simple operation of the TorqueStar Lite, including ‘Measurement Modes’ to switch between the numerous measurement modes, ‘Statistics/Results’ to view all of the current collected data results, View to quick view the readings taken, ‘Delete’ to clear and remove selected results and data and ‘Settings’ to view and edit the TorqueStar Lite configurations.

The gateway to the finest in torque measurement tools! Sturtevant Richmont TT-QC series torque transducers are designed to work with System 8 Digital Torque Tester when used with ML 1000 and ML 2000 Mechanical Loaders. These transducers use Quick Connect baseplates that are a feature of the loader system. Features and Benefits: - Hex mounting flange style. - Can be mounted to ML 250 and ML 600 mechanical loaders. - All up to 250 lbf·ft capacity can be mounted to Quad Plate for multi-transducer mounting on the ML 250. - Smaller sizes (up to 300 lbf·in capacity) can be mounted to STMB or UMB brackets for use with a bench or table. - Larger sizes can be mounted on UMB L-bracket. - Requires detachable cable (P/N 10293) for attachment to Switch Box or directly to tester. Related Products: - Mechanical Loader ML - DTT System 8

Die ReelClean500 Reinigungskassette, mit dem Sie bequem Ihre Steckeroberflächen vor jeder neuen Verbindung reinigen können. 500+ Reinigungen. Reinigt SC, FC, ST, E2000, LC, MU, PC & APC, MPO Stecker. Leistungsmerkmale: - Ein Reinigungsgerät – geeignet für die meisten optischen Steckertypen - Kompakte Größe für eine bequeme Handbedienung - Beste Reinigungswirkung durch einmaliges Wischen - Reinigungszeit Speichern - Trockenreiniger aus speziellem antistatischem Microfasergewebe – Staub- und Lösungsmittelfrei - Einfacher Wechsel der Ersatzrolle - Befreit Steckeroberflächen von Staub, Öl, Partikel, Alkohol, etc. - Fenster zur Darstellung der verbleibenden Reinigungsvorgänge - Belastbares Reinigungspad - Erfüllt RoHS-Richtlinie

The performance of an assembly tool is highly dependent on the conditions of the actual production joint on which it is used, which is where joint kits come in. Joint kits are an essential accessory for accurate off-line testing of powered assembly tools. Tooling engineers are well aware of the "mean shift" term used to describe the different torque delivered by the same tool when applied to a soft or a hard joint as defined by ISO 5393. It is therefore essential in testing and setting up tools off the production line to allow for the joint conditions which the tool will experience on the job. Crane's joint kits satisfy this requirement by using a bolt and suitably configured disc washers allowing free running of the bolt and a subsequent torque gradient to closely match the production joint condition. [...]

Der MaxTester misst die optische Dämpfung (IL), Rückflussdämpfung (ORL) und die Faserlänge und liefert innerhalb von 5 Sekunden Ergebnisse durch vollautomatische bidirektionale FasTesT™ Analysen.

Transponder 125kHz, Taubenring 8mm mit Clipverschluss, (1VPE =100Stück) Weitere Modelle finden Sie auf der Homepage von HT Instruments.

Digitale Stromzange 600A AC mit mA Funktion, CAT IV 600V Die professionelle Stromzange HT9012 wurde entwickelt, um Wechselströme bis zu 600 A in der Überspannungskategorie CAT IV 600 V bzw. CAT III 1000 V zu messen und entsprechen den Vorgaben der IEC/EN 61010-1. Diese Stromzange ist mit einer großen Anzeige und einer Auto Power OFF Funktion ausgestattet, um die Batterien zu schonen.

Integriert in die leistungsstarke Testplattform FTB-1 Pro, sind die Module der FTB-700G V2 Serie eine Ethernet-, Multiservice und OTDR-Testlösung gleichzeitig.

This high-accuracy digital torque screwdriver tester with loading device eliminates measurement errors. The loading device keeps stable measuring conditions to avoid reading errors. Can also calibrate small capacity torque wrenches using optional TDTLA. The measuring range is wide and applicable for various types of torque drivers. Comes with Pass/Fail judgment feature. Judgment results are shown in three colors (white/red/blue), for easy result recognition. Key Features: - Bi-directional measuring – CW and CCW - Measuring modes: Peak, Run (Track) - Status indication in 3 colors (white/blue/red) - Accuracy ± 1% + 1 digit - Upper/Lower Limit: 10 settings - Statistical processing: samples, max, min, mean value - Memory for 1000 readings (99 in M99 mode) - RS232C / USB output for serial data transfer to printer or PC.

The CheckStar Multi is the latest generation of Crane Electronics market leading CheckStar in line rotary torque transducer. It raises the standard for dynamic torque and angle measurement of all continuous drive and impulse tools, with proven reliable performance in thousands of applications worldwide. If angle is specified, the CheckStar Multi rotary torque transducer will include an angle encoder giving 0.125° resolution (720 PPR). It also incorporates a light ring, giving the user visual feedback of the status of a tightening, when used with a Crane readout or data collector. The CheckStar Multi fits in line between the assembly tool and the fastener, measuring the actual torques applied and angular rotation of the fastener, under production conditions. Whatever the vibration and shock loads experienced, CheckStar Multi’s patented contact system ensures a connection is always maintained between the readout and the strain gauges. [...]

OMS Lite is our NEW and intuitive torque management software package, in a more compact and easy-to-use format. OMS Lite offers a new and updated interface, following our recognisable and user-friendly icon-based navigation system for faster speed of use, ideal for production process and quality verification as well as assembly tool auditing. The torque software is also quick and easy to install and simple to configure for users, making it our most efficient and uncomplicated torque software package to date. Used in conjunction with Crane’s existing portfolio of torque measurement products, OMS Lite is able to provide the perfect quality system for periodic sampling of both residual and dynamic torque and angle measurements. With features such as ‘Jobs’, ‘Rounds’, torque traces and reports, it’s the ideal software system to manage all of your critical assembly tool and quality audit data, in one place. [...]

Package contents (per box): -1 sterile swab -1 extraction tube with buffer solution integrated incl. drop caps -1 Test cassette (individually packed ) -1 EN Instructions for use Features: -Sampling methods:◦Nasopharyngeal (nose-throat). -High sensitivity ( 96.95% ) and specificity ( 98.99% ). -Easy to use:◦Quick and reliable test results in as little as 15 minutes. Approvals: -BfArM-AT number:AT120/20 -PEI evaluation -HSC common list (RAT-ID: 1870) -CE certification: CE0123 Note: * Specialty testing should only be used by professionals or trained staff. Product Name: Novel Coronavirus 2019- nCoV Antigen Test (Colloidal Gold) Manufacturer: Beijing Hotgen Biotech Co., Ltd.

Digital torque meter with data processing function. Tohnichi's TME3 is suitable for checking torque on bottle caps, starting torque test, strength test, and twisting test, etc. Designed to measure rotating torque of precision parts. Ideal for cap testing. Intuitive icons indicate modes: Run, Peak, 1st 2nd Double Peak, Data/Parameter Setting. The 1st and 2nd peaks holding function, especially for bottle cap measurement. Can detect primary peak opening torque (when cap begins turning) and secondary peak (when bridges break). The drop width required for peak detection can be set to prevent mistaken detection of the unstable region. Easy to read LC display gives reliable visibility. Special teardrop shaped poles allows chucking from a minimum diameter of 7 mm to maximum 190 mm. Pole anchors use a corotation prevention mechanism to grasp your work firmly. With the optionally available calibration equipment, the tester can be calibrated by the operator himself if required.

Messleitungs-Kabeltrommel 30m Verlängerungsleitung 30 m, grün, auf praktischer Kabeltrommel, doppelt isolierte Silikonleitung, ideal für die Isolationsmessung, sowie zur Messung von Schutz- und Potentialausgleichsleiter, Strombelastung max. 20 A, Anschluss: Ø 4 mm Sicherheitsprüfbuchse/-stecker

The gateway to the finest in torque measurement tools! TT-Series Torque Transducers are designed to work with Sturtevant Richmont Digital Torque Testers or the like. Features: - Integrated SR mounting flange - Can be mounted to ML 250 Mechanical Loader. - Can be Mounted to Quad Plate for multiple mounting on ML 250. - Smaller sizes (up to 400 in.oz.) can be mounted to SSMB, STMB, or UMB brackets. - Larger sizes (500 ft. lbs. and above) can be mounted on UMB L-bracket. Related Products: - Mechanical Loader ML - DTT System 8 Optional Components: - 10293 = Detachable Signal Cable ca. 1,20 m * - 10153 = Single Mounting L-Bracket UMB (500 ft.lb and above) - 10154 = Triple Mounting L-Bracket STMB (up tp 400 in.oz) - 10601 = Switchbox 4-Way - 870776 = Square Adapter 1/4"f x 3/8"m - 870777 = Square Adapter 3/8"f x 1/2"m - 870778 = Square Adapter 1/2"f x 3/4"m - 870779 = Square Adapter 3/4"f x 1/1"m

Digitales Multimeter (TRMS) für Spannungsmessungen bis 1500 V DC Das HT65 gehört zu unserer digitalen Multimeter-Serie TRMS CATIV 600V. Es zeichnet sich dadurch aus, dass es Gleichspannungen bis zu 1500 V messen kann. Das Modell ist auch in der Lage, die Temperatur über die K-Sonde, den AC / DC-Strom mit einem externen Wandler und den LoZ-Spannungseingang mit niedriger Impedanz zu messen. Wie die anderen Multimeter der Serie verfügt es über eine Autorange-Funktion und eine definierte hintergrundbeleuchtete Anzeige.

Package contents (per box): -1 sterile swab -1 extraction tube with buffer solution integrated incl. drop caps -1 Test cassette (individually packed ) -1 EN Instructions for use Features: -Sampling methods:◦Anterio-nasal swab (Nasal). -High sensitivity ( 99.52% ) and specificity ( 100.00% ). -Easy to use:◦Quick and reliable test results in only 15 minutes. Approvals: -BfArM listed (BfArM AT number: AT1332/21). -CE certification: CE1434 PZN: 17942166 Note: * Specialist tests may only be used by specialists or trained persons. Product Name: Rapid COVID-19 AntigenTest (colloidal Gold) Manufacturer: Anbio (Xiamen) Biotechnology Co.,Ltd.

Essential for direct reading and high-capacity torque wrench calibration! Mechanical loaders increase the accuracy ot torque test results while simultaneously reducing technician fatigue from pulling or pushing on torque wrenches during testing. A mechanical loader is the perfect accessory to increase the repeatability and productivity of the System 5 Digital Torque Tester. The drive system for each loader assures true 90-degree force application to eliminate force angle error in testing. In addition, the loaders mechanical advantage reduces technician effort and fatigue, particularly in high-capacity tool testing. SR Mechanical Loaders use the highest quality ball screws to assure smooth operation and extended service life. Welded steel frames and rigid transducer mounting plates assure torque load is properly resisted. Optimized gearing selection reduces physical effort to operate, enhancing productivity and ergonomic safety.