Produse pentru recuperare (123)

PMMA

PP Big Bags

PET white pellets

Expanded PS

PAN Film

Temperation of fluids Pillow plates are used everywhere where liquids must be temperated. In dependence of application the liquids can be cooled or heated. Cause of this wide range of applications pillow plates are used in the process industry, in the cooling industry and in a lot of other industries. Pillow plates are also know as heat exchanger plates, evaporator plates, cooling plates /sheets and thermo plates / sheets. Pillow plates as air-/water-heat exchanger Additionally to the temperation of liquids pillow plates are also used as air-/liquid heat exchangers. In case of polluted or wasted air and if there are high demands for cleaning, more and more pillow plates are used as air-/water-heat exchanger. The large exchange surface and the good possibilities for cleaning are important features for this type of heat exchanger.

Mix pieces

PE Rolls

The FLX-PLO-EPP-F plenum boxes are part of the FLX-REKU air distribution system designed for domestic mechanical ventilation systems, so-called the MVHR system, to which an air valve and FLX-HDPE / FLX-HDPE-A ducts with a diameter of Ø75 are mounted. Casing material:EPP Spigot material:ABS Duct diameter:Ø75 and Ø100 & Ø125 (air valve dia) Insulation Material:λ=0.039 Airtightness: class C

HRUWALLRC is a bidirectional ventilation unit, often described as decentralized or pushpull, with regenerative ceramic heat exchanger. It is intended for single room installation, usually installed in synchronised pairs. The heat exchanger material together with its unique honeycomb structure gives a maximal 82% thermal efficiency ratio (74% acc. to 1254/2014 EU Directive reference measuring point). The operating principle is analogous to HRUWALL unit is working in alternating flow mode, switches the air flow directions every 40120 seconds (pushpull) and it’s equipped with energy efficient EC fan (maximum power consumption is only 6 W for HRUWALLRC15060). The unit casing is made of ABS plastic. A remote controller with LCD display is included in the set. We recommend installing the devices in pairs

HRUWALL is a singleroom decentralized heat recovery unit for concealed installation. The unit comes with a ceramic heat exchanger which boasts a maximum heat recovery ratio of 90% (the nominal heat recovery ratio is η=74.3% as per EN 1314182011). The energyefficient EC fan changes the running direction every 70 seconds to alternate between air supply and air exhaust. Low energy consumption and extremely low operating noise make this heat recovery unit a recommended solution for nonstop operation. The heat recovery unit has three speed levels to choose from, depending on the size of the area and indoor demands. HRUWALL10025 provides a sufficient air change level in areas up to 19m2. HRUWALL15060 provides a sufficient air change level in areas up to 45m2. We recommend installing the devices in pairs.

Aluminum Dross Recycling System Remove the hot aluminum sIag from the meIting furnace to the hot slag pot. and send it to the frying pot with the forklift truck. Separate hot aluminum ash and aluminum which have different density by rotating blade. Convey the separated hot aluminum ash to cooling barrel automatically. Material:carbon steel, stainless steel, gray iron, ductile iron, copper Served Industry:Aluminum recycling Design:Available

ABS-PC

PS Aluminium

The HRUSlimAIR heat recovery unit is designed for residential buildings. The HRU has a capacity of 250 m3/h @ 100 Pa, generated by energyefficient EC fans. Thanks to a counterflow heat exchanger made of a plastic (PET), it achieves up to 90% heat recovery An ERV version with an enthalpy exchanger that recovers moisture is also available. Builtin electric preheater protects heat exchanger against freezing, wireless radio communication connects controllers and sensors, and all of it is enclosed inside a selfsupporting, insulating EPP casing. HRUSlimAIR can be installed in up to 3 positions, thanks to a special condensate drain system.

PE lumps

Ventiladores de teto para recuperação de calor estratificado no teto Ventiladores de teto com caixa de proteção DT podem ser usados ​​para recuperar o calor estratificado no telhado no inverno, usando o ventilador no inverno nos permite economizar energia até 30%. A sua utilização pode ser comercial e / ou industrial e a sua instalação pode ser em tectos de 4m a 9m de altura. Os ventiladores podem ser montados individualmente ou em grupos com o respectivo regulador de velocidade. Operação de verão: O sistema de resfriamento consiste em baixar o ar quente localizado na parte superior do teto com o qual os sistemas de ar condicionado têm um maior retorno de ar frio e aumentar o seu desempenho e em instalações onde Eles têm sistemas de ar condicionado que permitem uma ventilação uniforme equalizando o temperaturas e recebendo uma brisa de ar.

HRUWALLWI model ductless heat recovery unit comes equipped with a WiFi module. Its basic parameters, including max. heat recovery 82%, airflow rate 60 m3/h, and low sound power level 38 dB (A), are identical to those of the HRUWALL units. Methods for pairing devices and controlling them are different. With the addition of a WiFi module, the device can be connected to a local wireless network and controlled via a mobile app. Moreover, the app allows the pairing of devices by assigning two or more heat recovery units to a group. It is possible to have many groups so that 1 application can serve all HRV units in a building. A temperature sensor and relative humidity sensor are built into the HRUWALLWI, and the app displays their values.

Aluminum Dross Recovery Unit for secondary aluminum producer With unique design, our aluminum dross recycling system manage the hot dross very effectively , the oxidation and metal loss will be terminated in a very short time, in-house metal recovery could be 70-80%, much higher than any other solutions. The system covers the following equipment. Dross stirrer Dross cooler Crusher and screening machine Dust collector Conveyor Application:Secondary aluminum production Efficiency:high efficiency 70-80% OEM service:Available

Huan-Tai has been a supplier to the aluminum Industry for over 27 years providing dross pans and sow molds to almost every major aluminum producer in our industry. We supply Aluminum dross recycling unit ingot molds dross pans sow molds cooling slat cake black dross.

Ceiling fans for the recovery of stratified heat in the ceiling Ceiling fans with DT protection casing can be used to recover the stratified heat on the roof in winter, using the fan in winter allows us to save energy up to 30% Its use can be commercial and / or industrial and its installation can be on ceilings from 4m to 9m in height. The fans can be mounted individually or in groups with their corresponding speed regulator.

EPP manifold boxes are used for heat recovery ventilation (MVHR). Due to EPP's insulating properties, MVHR manifolds do not need to be insulated. Manifold boxes are intended to distribute 75mm ducting around the house. The number of connectors varies based on the specifications of the user: 4-18 spigots. main duct diameter:125-160 mm spigot diameter:63 mm casing material:expanded polypropylene (EPP) application:mechanical ventilation with heat recovery function:air distribution in MVHR system

RLT-Geräte mit integrierter Wärmerückgewinnung wie Kreislaufverbundsystem / Rotations- oder Plattenwärmeübertrager. Zur Innen- und Außenaufstellung, wenn gewünscht als Vollklimatisierung.

El derroche energético y el calentamiento de la tierra perjudican a la naturaleza y al medioambiente y amenazan nuestro futuro. Usted puede hacer mucho para evitarlo. Por ejemplo, con conceptos innovadores y soluciones de intercambiadores de calor para la recuperación energética gracias a los que podrá utilizar térmicamente, mediante la transmisión de calor, el agua, el agua residual, los líquidos de proceso y los vahos en el lugar de origen en los edificios, en la industria, en la canalización hacia las plantas depuradoras e incluso en las aguas superficiales. Además de los aspectos ecológicos, la inversión en el campo de las energías renovables es también rentable. Con KASAG como socio para la concepción, diseño, ingeniería y construcción de instalaciones de intercambio de calor para la recuperación energética del calor residual usted actuará de forma sostenible.

RLT-Geräte zur Innen- und Außenaufstellung, wenn gewünscht als Vollklimatisierung mit Regelung, Kälteanlage oder Wärmepumpe, Heizungsanlage und/oder Warmwasseraufbereitung.

Das Abwasser in der Kanalisation ist, in Kombination mit Wärmepumpen und Kältemaschinen, eine ideale Energiequelle zum Heizen und Kühlen von Gebäuden. Erfahrungsgemäss sind die Minimalanforderungen für eine solche Anlage: eine Abwassermenge von ca. 10 l/s ein Abwasser-Temperaturniveau von rund 10°C ein Leistungsbedarf ab 100kW (bei Heizen und Kühlen ab ca. 50kW). Auf dem Weg des Abwassers in der Kanalisation bis zur Kläranlage bestehen viele Möglichkeiten der Wärmeenergienutzung. Das Abwasser kann sogar mehrmals hintereinander als Energiequelle genutzt werden. Trotz neuen Zuflüssen, der Einmündung in grössere Sammler oder auch durch Wärmeeintrag aus Kühlsystemen, ist die Temperaturänderung des Abwassers meist marginal. Innovative Städte haben Energie-Richtpläne erarbeitet, anhand derer Sie sich orientieren können, ob in Ihrer näheren Umgebung (maximal ca. 200 m Entfernung) ein geeigneter Abwasserkanal durchführt. Kontaktieren Sie Ihre Stadtverwaltung!

Die Nutzung eines Energiepotentials am Ort der Entstehung ist optimal. Die Sicherstellung des Wärmeübergangs im Wärmetauscher ist dabei das entscheidende Kriterium und erfordert individuelle Lösungen. Schwallweiser Abwasseranfall in Gebäuden wird in einem Rückhaltevolumen gesammelt und mittels Wärmetauscher für Heizen und Kühlen energetisch genutzt. Bei kontinuierlichen Abflüssen und Prozesswärme ist kein Rückhaltevolumen erforderlich. Einsatzbereiche sind zum Beispiel Mehrfamilienhäuser, Wohnüberbauungen, kommunale Gebäude, Hotels, Thermalbäder, Schwimmbäder sowie verschiedene energieintensive Industrien wie in den Bereichen Nahrungsmittel, Chemie, Pharma.

L'acqua di scarico nelle fognature rappresenta, in abbinamento alle pompe di calore e alle macchine per la produzione del freddo, una fonte d'energia ideale per il riscaldamento ed il raffreddamento degli edifici. Per esperienza i requisiti minimi per un impianto di questo tipo sono: - Una portata dell'acqua di scarico di 10 l/s circa - Un intervallo termico dell'acqua di scarico di 10°C circa - Una potenza richiesta a partire da 100 kW (per il riscaldamento e per il raffreddamento da 50 kW circa). Lungo il percorso dell'acqua di scarico all'interno della fognatura fino all'impianto di depurazione sono presenti diverse possibilità di sfruttamento dell'energia termica. È possibile utilizzare l'acqua di scarico persino diverse volte di seguito come fonte di energia. Nonostante i nuovi afflussi e lo sbocco in raccoglitori di dimensioni superiori o anche per effetto dell'apporto termico dagli impianti di raffreddamento, la variazione termica dell'acqua di scarico

Waste water treatment plants and surface waters have enormous energy potential. A sewage treatment plant, for example with 90 million litres of wastewater daily, reducing the wastewater temperature by using heat exchanger by around 1°C, generates a power of about 4.3 MW. The comparative potential for energy recovery from the surface water is even higher. Environmental aspect Induced by humans, water temperatures of the surface and streams have steadily increased, not least owing to the inflows from sewage water treatment. This has serious consequences on the flora and fauna. If heat is extracted from purified water in the sewage treatment plant or from surface waters and from streams, and water temperature is thereby reduced, this will have a positive effect on the entire ecological system. With KASAG heat exchanger systems, on the one hand, the energy requirement of the sewage treatment plant can be covered and, on the other, buildings in near vicinity can be heated or cooled.

Prêle*, thé vert de Chine Sencha*, camomille*, ortie*, dent-de-lion*, arôme naturel, sureau*, romarin*, thym*, curcuma*, ananas*, fleurs de bleuet*, açai*. *Produit issu de l’agriculture biologique Référence:VRACRECUP