Produse pentru masini (1998)

This chisel can be used for cultivating soil without needing any plough in the farm after harvest. Due to the structure of its legs, the plough crushes the lower layer and it is a suspension machine cultivating low-clod soil in arid summer months when ploughing cannot be performed. It is possible to perform deep soil cultivation through the chisel

12500 Kg Capacity Tandem Trailer. AOT 519 S trailer has 2 axles and 4 tires. The axle system is different compared to other trailers.Tandem axle system is used. It is offered as the leader of its class with its hydraulic front jack and powerful lift.Trailer axles are closed hub system and do not require lubrication for many years. The trailer is connected to the tractor from behind and pulled with the appropriate speed limit.

Both hydraulic and towed V type offset disc harrows are both hydraulic and towed type machines used for doubling and tripling the field, which is left to rest for one year after ploughing with a plow, for cutting plant residues (corn, sunflower, wheat, etc.) and weeds and breaking the duff layer after harvest. These machines prepare the field for direct sowing without using another agricultural machine by cultivating the soil without clods in the dry months when the plows cannot be used after.

Thanks to the Solid Fertilizer Distribution Trailer, the fertilizer is distributed more homogeneously over a wider area. Thus, it prevents soil compaction by providing less trampling of the soil, and our producer saves time and fuel. Wet manure, medium wet (moist) and solid manure can be thrown with the solid manure trailer. This saves labor and ensures that the appropriate fertilizer is applied according to the plant to be grown. This type Solid Fertilizer is designed to distribute fertilizer homogeneously between trees.

6000 Kg Capacity, 2 Axle, 3 Side Tipping Trailer. AOT 503 Y is 3-sided tipping and is the most useful trailer in its class.In low-height warehouses, you can unload your load by lifting to the right or left. Thus, you save time and labor. Trailer axles are closed hub system and do not require lubrication for many years. The trailer is connected to the tractor from behind and pulled with the appropriate speed limit.

It is specially produced for high stacking of square type bales between 250 and 500 kg. Together with the front loader, the skewer tip can stack up to 560 cm high.

X type mounted tandem disc harrow is used in farmland and orchard farming for preparing seed beds and seedling beds. It mixes the post-harvest stems and residues of the plants left on farmlands into the soil by crushing them. It crushes clods formed on the farmland after using machines such as plough, chisel and cultivator and breaks up the soil. Due to its three point linkage system which can be slided, it can be easily used in areas with trees.

The KM-100 and KM-200 baler is the result of rigorous work and technical research developed by competent engineers from KOM SILAJ. Designed mainly for the silage baler it also allows to treat other materials like; beet pulp, corn silage and all other fodder crops to facilitate the work of farmers.

With this type of attachment called bigbag, l oading and unloading of large sacks can be done easily.

It is used for loading and unloading cotton bales.

Casting rollers have an important place in seedbed preparation. They compress the top layer of the soil at approximate planting depth by keeping the moisture, as well as allowing the underlying moisture, which cannot used by the plants, to rise up. By this way, the seeds make better contact with the soil and germinate easily. Breaking and breaking the clods on the soil surface and smoothing the surface before planting ensures that the sowing machine works easily without clogging.

Together with the tractor front loader, it provides convenience in loading beets to a height of 450 cm.

Acrobat wheel rakes have respective raking widths from 2.50m. to 3.50m. They connect to tractor with 3 point hitch system. Also, springs system provides maximum performance in any condition. The rakes can be adjusted easily and quickly. the lowest cost rake type because there is no power take-off. (PTO) Strong and stable design Optimum ground adaptation

Desander+Desilter

3 different models, from 2.45 to 1.65m cutting widths, 3-point hitch mounting ADM series disc mowers, handles tough conditions while delivering clean cutting performance, maneuverability, durability and overall value. Automated spring system minimizes impact affects and helps to reduce all damages. The modular design of the discs allows you to replace them individually. When in transport, the mowers are folded to a vertical position well behind the tractor for safe transport. Enhanced frame Adjustable swath width Special designed cutterbar Spring system supports across the whole working width pressure in the field Adjustable transport position

The 3 rows independent maize chopper 2200 is specially designed for medium size enterprises, it capable of chopping 3 rows at the same time. Machine can be operated at the front side or rear side of the tractor. AMS-2200 has 12 specially designed and hardened knives placed on the flywheel. There are 2 feeding drums and 4 crushing drums in the machine that lead crops to flywheel. You can control the AMS-2200 using with just one finger, isn’t it perfect? We produce the hundred percent of our machines with our wide range of machine parkour. From its blades to the transmissions, all the parts are manufactured in our factory. As a matter of fact, the ability of our machine to operate with small horsepower tractors is reflected in the fuel. it operates with minimum fuel consumption and it is an another plus to our customers.

Alchemist single rotor rakes offer working widths of 3.30m. With the option of pivoting, fixed three-point linkage mounting to suit all your needs. The rakes have mechanical height adjustment via a crank, with the possibility of adjusting to the individual field conditions. For transport on the road, remove the arms and stow them on the space-saving holders. Designed for use on low horsepower tractors, but it still delivers considerable working width. Proves to be a popular choice among haymakers. Maintenance-friendly %100 domestic prodcution gearbox. Easy to adjust height Stronger arms Hydraulic design allows you to set the rake to different field conditions. Compact and light design that can be operated by smaller tractors

PL 2541 series modular belt has 0.4" (10mm) thickness.It has 37% open surface area with high permissible tensile streght.It has less product contact area and easy to clean with it's perforated surface.Produced POM,PPand PE.Preferred Application Areas;Sea food industries ;washing lines.Fruit and vegetables industries;inspection tables,washing conveyors and de-watering lines. Bakery industry including cooling lines,internal transport,metal detectors and packing lines.Less friction and product contact applications.Cooling and freezing conveyor applications