Produse pentru masini (16)

Starch molding machine is designed for production of fruit-jelly (including jelly candy), liqueur, fondant sweets and Korovka sweets by starch molding. The machine consists of a movable belt, a molding mechanism and a depositor mechanism. The tray is filled with starch which serves as a forming material. The confectionery mass is fed from the hopper to the dosing unit which performs deposition of sweets/molding the marmalade into molds formed in the starch layer.

A professional component spray washing unit with rotating basket or ramps and easy-to-open lid. Washing of parts effectively removes oil and grease contaminants, sand, dirt, dust. The unique Geyser Spray solution spraying system delivers a solution under pressure to the surfaces of items to be cleaned. The set of multidirectional nozzles allows the jets to penetrate into the most difficult-to-reach parts of the item. This guarantees high-quality cleaning. The efficient cleaning of surfaces that helps to remove a wide variety of contaminants is carried out with and alkaline cleaning solution heated to a predetermined temperature. Basket diameter :Min 550 mm, Max 1400 mm Washing space height:Min. 400 mm, Max 780 mm Capacity (maximum):400 kg

The machine being connected to the tractor is designed for self-loading, transportation and surface application of liquid organic fertilizers. The machine can be used to transport industrial water and other similar liquids. In all types of organic fertilizers, organic residues as well as several mechanical inclusions of no more than 30 mm are allowed. The moisture content of fertilizers shall be at least 92%. The machine is connected with tractors that have a power take-off shaft, and traction coupling device according to GOST 3481-79 (Russian State Standard). Such tractors shall have pneumatic equipment for brake gear and terminals for connecting electrical and hydraulic equipment of the machine. It is aggregated with a tractor of traction class:3.0-4.0 Tank capacity, m3, max:11.0 Drive of working units:Mechanical, hydraulic Pump characteristics: performance, m3 / h (l/min):360 Tank pressure, MPa: discharge, not less than / excessive, no more than:0.085 / 0.03 Tank filling time, min:10.0-13.0 Fertilizer application doses, t / ha:10-60 Maximum depth of liquid intake during self-loading, m, no more:4.0 Fertilizer application width, m:6.0-12.0 Performance, t / h:40 Transport speed, km / h, max:25 Opearing brake system:Pneumatic Parking brake system:Mechanical with manual drive Number of service personnel, no more:1 (tractor operator) Overall dimensions, mm, not more than: length * width * height:7500 * 2550 * 3100 Weight, kg, not more than:4000 Tire pressure, atm.:4.3 Reliability indicators:According to pump

Deep and effective cleaning of any surfaces - textiles, leather, plastic, rubber. Works due to a strong flow of compressed air coming under high pressure. Due to the spiral swirl of air, a "tornado" effect occurs, as a result of which the pile rises and dirt is knocked out, and all particles of dirt and dust settle on the inner surface of the funnel. Body, spiral hose, gun with funnel, chemical container, control cabinet, software. The compressor is supplied separately.

The Sura MK and Sura AMK candy forming machines are designed for forming endless bundles, as well as candy cases with and without filling of various shapes in cross-section: rectangular; trapezoidal; semicircular; round, etc. The Sura MK machine is equipped with a guillotine cutting unit, a conveyor and can be connected to glazing machines and cooling tunnels; The Sura AMK machine is used with cooling tunnels and deposits bundles or candy cases on the tunnel tape. For the production of candy cases, the Sura AMK machine is equipped with a string cutting unit.

Casting confectionery machine for the production of fudge (sweets) in correcs - SURA-OM confectionery casting machine for casting sweets fudge in the correction . The machine consists of a moving chain conveyor. The mass from the hopper enters the gear-type dosing head, which performs the casting of sweets into silicone, polycarbonate molds, etc.

The most efficient model of washing equipment designed for continuous processing of parts. It may include washing, rinsing and drying units. The washing unit is equipped with a conveyor, a control cabinet, an assembly compartment, an oil separator, tubular electric heating element, a temperature sensor and a solution level meter. The conveyor speed is individually adjustable and can reach several meters per minute. The unit is designed for surface treatment by high pressure water jets to remove oil and grease contaminants, fine chip, cooling mixtures, and coked-free sand and dust deposition. The installation fully meets modern requirements applicable to the parts, components and assemblies washing technology. The unit is intended for indoor use. Washing space length:Min 2500 mm, Max 5600 mm Washing space width:Min. 700 mm, Max 1000 mm Washing space height:Min 400 mm, Max 900 mm Conveyor speed:Min 0,5 m/min Max 5 m/min Capacity (maximum):70 kg/ sq.m.

Fully automated spray cleaning system equipped with upward-opening passage curtain. The unit is designed for cleaning large and heavy parts and assemblies. Parts are put on a movable bottom (trolley) and move inside the washing chamber. The part is processed by means of a gantry U-shaped ramp with multidirectional nozzles on all sides. The efficient cleaning of surfaces that helps to remove a wide variety of contaminants is carried out with an alkaline cleaning solution heated to a predetermined temperature. Washing space length:Min 2500 mm, Max 2500 mm Washing space width:Min 1000 mm, Max 1700 mm Washing space height:Min 1000 mm, Max 1400 mm Capacity (maximum):4000 kg/ sq.m.

It is designed for high-quality and uniform coating of various confectionery products with various types of glaze: chocolate fat sugar syrup, etc Due to the tank heating jacket and a mixing device, the glaze is heated to the operating temperature. The glaze is pumped into the glazing tank, and then the tank slide gates are opened and adjusted to obtain a straight, steady stream. The products to be glazed are placed on the feed conveyor and the conveyor is powered up. The products are transported on the large conveyor to the glazing area and then to the blowing area to remove excess glaze from the top. The bottom of the product is smoothed with the special rollers and then the products are transported to the cooling area. The glazing machine can be equipped with a decorator. Products can be glazed separately from the top, bottom or all sides. The machines for glazing with sugar syrup are manufactured considering some modifications necessary to operate the fast-hardening products.

Fully automated spray jet cleaning system with rotating ramps, upward-opening curtain and roll-out worktable. It may include several stages of cleaning: washing, rinsing, drying. All stages are performed in one chamber. The washer is designed for cleaning large parts weighing up to 1,5 ton starting from cooling mixtures, dust, shavings, composites, oil after stamping, conservation lubricants, polishing pastes, emulsions, oil products. The efficient cleaning of surfaces that helps to remove a wide variety of contaminants is carried out with an alkaline cleaning solution heated to a predetermined temperature. Washing space length:Min 1400 mm, Max 2200 mm Washing space width:Min. 1400 mm, Max 2200 mm Washing space height:Min 1000 mm, Max 1450 mm Capacity (maximum):1000 kg/ sq.m.

The machine is intended to knead various types of high viscosity dough at confectionery and bakery enterprises: •gingerbread dough; •dough for doughnut products; •dough for sugar cookies; •dumpling dough, etc. The dough dish overturns through 120 degrees to unload the dough. All dangerous points of the machine are guarded. When the cover is open, the vane drive motor is automatically shut off. The feature of the dough-mixer is its powerful Z-shaped blades of stainless steel that enable to knead the tight dough gently. A variable frequency drive is used for smooth change of the blade rotation speed that makes it possible to use the machine for kneading crumpet dough.

A washing unit with manual cleaning designated for complex cavities, soot dirt and carbon deposits. It is guaranteed to remove: cooling mixtures, dust, shavings, composites, oils after stamping, rust-preventing grease, polishing compounds, emulsions, oil products, sweat and grease deposits. The unit allows you to clean parts with complex cavities. A washing unit is equipped with a pneumatic drive for connecting a pneumatic brush and an air gun, as well as a flexible hose for supplying water under pressure. Basket diameter :Min 700 mm, Max 1400 mm Washing space height:Min. 400 mm, Max 780 mm Capacity (maximum):400 kg

The СУРА-СП forming machine is designed for molding sugar cookies onto a belt with a further transportation to a wire-mesh plate of tunnel oven. The forming drum is one of the main units of the forming machine. It is a part of this machine and used for forming one type of cookies that have defined shape and pattern. At the request of the Customer, we can manufacture any number of drums with any pattern and shape of cookies. The patterns and shapes are chosen according to the catalogue.

Slurry tanker LKT-V is intended for collection and transportation of waste. It is absolutely vitally important in agriculture, being light and efficient. Tank capacity: 2, 4, 5 m3 Chassis: tractor Availability: on order Colors: grey, green Delivery: our driver, the transportation company, pickup. Other delivery options Unit type:Semi-mounted Tank capacity, m3, not less than, useful capacity, not more than:4,0 Operative parts drive:Mechanical Pump characteristic: output, m3/h (l/min):240 (4000) Tank pressure, MPa expansion pressure, not less than / excess pressure, not more than:0,085 / 0,03 Tank filling time, min:6,0 Tank discharge time: gravity drainage/pressurized:7.0 / 5.0 Maximum suction depth, not more than, m:6,0 Travelling speed, km/h, not more than:25 Parking brake system:Mechanical hand driven Clearance, mm, not less than:400 Maintenance personnel, not more than:1 (tractor driver/operator) Dimensions, mm: length * width * height:4800 * 2200 * 2100 Weight, kg, not more than:1600 Reliability rate:According to pump

The control panel of the washing complex is made of polished stainless steel 2 mm thick. It has a decorative visor. The panel has 6 functions, 4 of which are basic (water, water with foam, foam and wax), and 2 additional ones - at the customer's choice (active dry cleaning for the body/disks, osmosis, mosquito, air blowing and vacuum cleaner). The panel also has a pause button, which, if desired, can be replaced with another function.

The control panel of the washing complex is made of stainless steel. The panel has 6 functions, 4 of which are basic (water, water with foam, foam and wax), and 2 additional ones - at the customer's choice (active dry cleaning for the body/disks, osmosis, mosquito, air blowing and vacuum cleaner). The panel also has a pause button, which, if desired, can be replaced with another function.