Produse pentru masini (1679)

The inverter allows the progressive adjustment of the rotary table, avoiding the immediate start that could cause possible damage to the products on the pallet. Wrapping machine with rotating table mod. FP ECO/A with photocell to height reading of the pallet, digital panel with 3 programs winding, inverter for soft start, manual lock/cut of the film and automatic wrapping cycle (Machine CE). Maximum load:Kg. 2000 Pallet max height:mm 2200 h (2400 mm with optional) Turntable diameter:mm. 1500 Height of turntable:mm. 75 Power supply:380V 50Hz. + T + N Installed electric power:Kw 0,4 Machine dimensions:mm. 1500 x 2150 x 2450 h Weight:Kg. 350

CJS 25 HI is an electronic dosing device with load cells for semi-automatic filling of bags with max weight 25 kg. Hopper capacity 300 l, bags weight 2-25 kg. The machine is suitable for the automatic dosage of granular products with a good flowability. The dispenser is mainly formed by a welded and painted tubular steel, stainless steel, loading hopper with pneumatic closing, fast discharge channel, slow discharge channel with vibrator to achieve the exact weight, weighing hopper installed on load cells, pneumatic device for locking the empty bag, PLC operator interface and user-friendly keyboard. The dispenser can be combined with a motorized conveyor for automatic loading of the product and to a free or motorized conveyor for unloading the full bag, it can also be combinated with an automatic packaging machine. All parts in contact with the product are made of stainless steel. Ideal for packaging of pellets, granulated foods, dried pasta (short), cereals, coffee, nuts, sugar, etc. Weighing range:2 - 25 Kg Weighing rate:8-10 / minute Tolerance:± 0,5% Weighing system:Load cells Compressed air supply:6 bar Hopper capacity:300 l

2 side sealing bars lenght 600 mm, vacuum pump 40 m3/h. Also available with MAP - Vacuum packaging machine with trolley and double lateral sealing bars, made of stainless steel (AISI 304). Equipped with digital panel and volumetric electronic sensor for the steady control of vacuum. Volume increased chamber and convex lid for a max eight of 250 mm. The vacuum pump of 40m3/h with three-phase 380V motor ensures high productivity. The two side bars with a length of 60 cm allow to pack more bags simultaneously (on one or both of the bars), reducing packing times. Is however possible to use it with a single bar. The DZ 600 2S packaging machine is also used for the vacuum seal and the jars of creams, jams, etc .. The vacuum chamber utilizes specific smooth envelopes for vacuum. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. Sealing bars length:mm 600 Number of bars:2 laterals Vacuum pumps:40 mc/h Work cycle:about 30 sec Useful width:mm 530 Useful lenght:mm 620 Useful heigth (chamber + lid):mm 160/250

The strapping machine with side head is recommended in all sectors in which, with traditional machines, processing residues such as grease, liquids, etc., cause operating problems. The SP92-E is suitable for products with minimum dimensions of 10x50x100 mm; uses strap with a width of 12 mm and a maximum thickness of 0.65 mm. Equipped with worktop with adjustable height and device for automatic shutdown, after 60 sec. of inactivity. Strap width:mm. 12 Strap thickness:mm. 0,6 - 0,65 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:140 Kg

Manual eyeleting machine suited to the insertion of the eyelets on boxes of pasta, biscuits and food in general. The eyelet is very used to attach the jumper on which are printed all product-related information. Usable eyelets:eyelets diameter mm. 7 and 9 Total Length:mm. 220

Automatic strapping machine mod. JN85-R with reduced welding plate (width mm. 27 instead of the standard mm. 60) for the automatic strapping of products with small size. Special machine designed to avoid issues in strap releasing in case of strapping of profiles, beams and small packages. The launch of the strap is operated with the foot control or the button. The strap is tighten, heat-welded and cut. The holding capacity of strap depends on material type and on strap choice. Strap width:mm. 9 – 12 – 15 Strap thickness:mm. 0,5 - 0,65 Reel internal diameter:mm. 200 Power supply:380 V 3 phase Weight:190 Kg

DOUBLE CHAMBER STAINLESS STEEL VACUUM MACHINE WITH TRANSLATING HOOD FPHVC 820G - WITH ATM AND 100 m³/h PUMP Large vacuum packaging machine with two stations equipped with front and rear sealing bars, translating bell equipped with a comfortable handle and springs for weight balancing. Construction in stainless steel (AISI 304) with rounded shapes for easy cleaning, digital panel, vacuum gauge for constant vacuum control and 100 m³/h vacuum pump for a high packaging speed. The opposing sealing bars have a length of mm. 820 and the distance between the front bars and the rear bars is 700 mm. The machine is equipped with a gas injection valve (packaging in MAP). Number of sealing bars:2+2 front-rear Sealing width:mm 3x2 (two 3 mm parallel seals) Length of sealing bars:mm 820 Chamber dimensions:mm 910x800x225 Useful chamber dimensions:mm 820x650x180H pump:100 m³/h Working cycle:25- 30 seconds

Wrapping Machine Mod. FP 15 SE/T with table cut for loading and unloading with pallet, and safety photocell, photocell height sensing pallet, digital panel with 3 programs winding, inverter for soft start, manual lock/cut of the film and automatic wrapping cycle (machine CE). NOTE: the machine is loaded from the side. When ordering, with a surcharge, it is possible to obtain the modification for the front load. UPON REQUEST WE CAN MAKE WITH WRAPPING MACHINES: Rotary table diameter mm. 1800 (pallets up to 1300x1300 mm)Place the pallets (EPAL) using a simple hand pallet truck, attach the film to the base of the pallet, select the wrapping program and press the start button. The machine automatically winding and stops. Cut the film manually. Attention: the pallet must not have the inner crosspieces on the side of the transpallet. Capacity:Kg. 1000 (1500 kg with optional) Turntable diameter:mm. 1500 Max dimensions pallet:mm. 1000 x 1200 Max height pallet:mm 2200 h (3000/3200 mm with optional) Turntable speed:4 - 7 rpm Turntable height:mm. 90 Power supply:380V three-phase 50Hz. + T + N Installed electrical power:Kw 0.6 Dimensions:mm. 1650x2520x2560 h Weight:Kg. 550

The labels are read by two sensors that, self-learning by the microprocessor, automatically identify the difference in transparency between the label and the backing paper, presenting the label on the peeler almost completely detached. Withdrawing the label the next pop-up automatically. The control board also allows to stop the rotation of the motor coil is completed, or in case of breakage paper signaling the anomaly with a sound signal. Label width:mm. 15-100 Label length:mm. 15-150 Power:30 W Dimensions:mm. 242x280x183 h weigth:Kg. 4

FP RWR is a series of reel-winders of self-adhesive labels in rolls built for industrial use, robust, completely made of steel, equipped with a large support base for a stable connection to the printer. Available in versions with a maximum width of 130 mm. or 230 mm. The expansion mandrel allows the use of internal cores from 40 to 110 mm. (76 mm for the BIG model) and rewind reels up to an external diameter of 300 mm (400 mm for the BIG model). An innovative dancer position detection system allows to perfectly follow the speed of the printer avoiding tears or continuous stops. It is possible to rewind in a clockwise or counter-clockwise direction and select the maximum speed range to be reached. Powered at 230V or on request 115V, it does not require a separate power supply. The microprocessor control board also allows to stop the rotation of the motor when the reel is finished or in case of paper breakage, signaling the anomaly with an audible signal. Example model:FP RWR 130 Max label width:mm. 130 mm. 130:mm. 300 Spindle diameter:mm. 40-110 Rewind speed:variable 0-25 m/m

PRATIKA 55 SMART: AUTOMATIC THERMORETRAIBLE PACKAGING MACHINE WITH INCORPORATED TUNNEL The new model of automatic shrink-wrapping machine Pratika 55 Smart comes from a careful attention to the needs, with the aim of offering a technologically advanced but flexible and extremely compact product. The included tunnel, revolutionary in the world of automatic machines, responds to the needs of space, but above all to reduce the labor costs to a minimum, thanks to the patented "come back" option to a single operator. Enhanced by a strong mechanical and electronic technological content, the new Pratika 55 Smart represents a perfect synthesis of reliability, versatility and safety, which once again evolves the way to conceive the compact automatic operation shrinkwrappers. Power supply:400 V 3 ph + N Max installed power (including tunnel):7.5 kW Hourly production:0-1200 pz/h Max. product size:mm. 400x420x120h Max. reel size:300 mm (diameter) Max. reel band size:600 mm (width) Worktable height:870 mm (h. infeed conveyor) machine size :2390x1190x1680h. Mm Usable films Polyolefins:9-38 microns machine weight:677 / 813 kg

PNEUMATIC SEALER SM 35/40A - WITH DATE PUNCHER Pneumatic sealer SM 35/40 A for closing bags in any material using an aluminum plate with a height of 5/7 mm. All parts in contact are made of AISI 304 stainless steel suitable for contact with food. The seal is obtained from a coil with high autonomy, cut to a length of 35/40 mm, wrapped around the neck of the bag and finally pressed to form a flat closure. Machine complete with date and a kit of numerical punches, practical, economical and safe. Example model:SM 35 A - 5 mm Machine power supply:Pneumatic Air consumption:50 liters/minute Operating pressure:6 bar Maximum closing speed:30 pz./min Aluminum seal dimensions:Width 5 mm Thickness 0,6 mm Lenght 35 mm

Horizontal ring wrappers with automatic hook/cut of the film and manual progress - Wrapping machines with rotating ring series RING BOX EVO with automatic hook/cut of the film automatic and manual advancement, for the packaging with stretch film of sections, bars, boards and products with elongated shape. Practical and economical, allow to lower operating costs thanks to low consumption of energy and materials. The introduction of the products to be packaged is manual and is made by sliding them on a idle roller conveyor. By a foot pedal, is carried out the winding of the film on the product to the desired time; at the end of the cycle, with a slight movement of the pack, is obtained the cold-cutting of the film. All operations are controlled by PLC. Example model:RING BOX EVO 70 Internal ring diameter:mm 700 Max. rectangular section:mm 550x300 Min. product lenght:mm 500 Max. product lenght:unlimited

HOOD PACKAGING MACHINES - FP 5540 – FP 7060 SERIES L-seal hood shrink packaging machine combines sealing with shrinking into one step. The operator places the product between the two layers of mono-fold film, then moves the package into the sealing area and lowers the hood. When the shrink time is completed, the hood is returned to the up position and the operator may remove the completed package . The transparent cover makes the process of sealing & cutting and shrinking be visible. Colours: dark gray or orange depending on availability. It suitable for PVC shrink films with max. thickness 30 my and POF shrink films with max. thickness 19 my. Two models are available with a support surface of mm. 500x400x250h - mm. 650x550x300h. The dimensions of the support surface are to be considered with the hood closed. The volume cannot be completely filled by the box or by the product to be packaged as space must always be left for the passage of hot air around the product. Example model:FP 5540 Sealing bars dimensions:550x440 Internal hood volume (mm):500x400x250 h Max film roll width (mm):580 Usable film:PVC max. thickness 30 my PPL max. thickness 19 my

Automatic strapping machine mod. TP 101, simple and reliable, is an excellent solution for strapping of packages handled by an operator. The positioning of the material to be strapped can be done manually or by means of an idle roller. The operator lunch the strapping by simply pressing the foot control or the start button. The strap is stretched, thermally welded and cut. The arch strap guide is in aluminum. The strapping tool is characterized by a new sealing blade for maximum effectiveness of the closure and an external knob to easily adjust the tension. Worktop with idle rollers. Operation with Mitsubishi PLC, the strapping machine turns off automatically after 60 seconds of inactivity. Strap width:mm. 9 – 12 – 15 Strap thickness:mm. 0,5 - 0,65 Reel internal diameter:mm. 200 Power supply:400 V. three-phase Weight:200 Kg

Manual clamp eyeleting machine for eyelets type 7-9-051 and type 31-80 on bags - The GIGA manual eyelet clamp, thanks to the long steel levers, allows the eyelets used for packaging to be applied with minimum effort. Furthermore, by changing only the punches, it is possible to apply the larger eyelets (like sail for towels and banners from VELA 31 to VELA 80) Eyelets used:Type 7-9-051 VL eyelets used: VL large eyelets from 31 to 50 VL and from 60 to 80 VL

The semi-automatic strapping machines are ideal for tying boxes, packages, bundles, etc. in warehouses, workshops, supermarkets and anywhere there safe packing is needed. The plastic strap helps to reinforce the packaging and ensure ligation. The printed strap is also available. If placed around the packaging, the strap is a valuable burglar resistant tool, if the package is opened it can not be closed with the same type of strap. Strap width:mm. 5 – 9 – 12 Strap thickness:mm. 0,5-0,6 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:100 Kg

Place the pallet on the platform, attach the film to the base, select the wrapping program and press the start button.The machine automatically winding and stops. Cut the film manually. On requrest we can produce wrapping machines with: Rotary table diameter mm. 1800 - 2000 Electronic balance with load cells Load/ Unload rollers STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. The type of films supplied by us is of premium quality and is suitable to be used on our machines. We recommend using only top quality film in that it significantly reduces packaging waste and failures due to the use of an unsuitable product Maximum load:Kg. 2000 Pallet max height:mm 2200 h (2700 mm with optional) Turntable diameter:mm. 1500 Height of turntable:mm. 75 Power supply:380V 50Hz. + T + N Installed electric power:0.75 kW Machine dimensions:1500 x 2500 x 2550h Weight:Kg. 500

Rotating platform Mod. FP T 1500 with recess for transpallet insertion, table diameter mm. 1500 and 90° load (only base without column). Following some modifications made to the machines it is no longer possible to have front loading. The pallet must not have the lower sleepers on the insertion side of the pallet truck. In the basic version, for safety reasons, the operator must always keep the button or the footswitch pressed during winding. Releasing it, the rotary table stops randomly, so you must manually align the platform to the unloading position. When ordering, it is possible to purchase the surcharge for the electrical system with PLC LOGO SIEMENS, complete with safety photocell on the pallet load, programming of the number of revolutions, variation of the table speed (inverter) and stop in the unloading position. With this modification the power supply of the table goes from 380V to 220V. MAX CAPACITY:Kg. 1000 (1500 with optional) Turntable diameter:mm. 1500 Max. pallet dimensions:mm. 1000 x 1200 Turntable speed:7 rpm Turntable height:mm. 90 Power supply:380V - 50Hz (220V with PLC optional) Installed power:Kw. 0,4 Dimensions:mm. 1650 x 2520 x 500 H Weight:Kg. 300

The robot stretch wrapping machine model. FP EASY ECO, battery-powered and automatic steering with overrunning side wheel (CE). Turning around the pallet automatically performs the film wrapping or network. Equipped with manual steering for driving forward and backward buttons, traction batteries maintenance-free gel, current transformer 24 V DC - 220 V AC, built-in charger, electric motors, three-phase inverter driving wheel height adjustment, front bumper security.Place the machine near the load to be wrapped Hook the film or the net to the load Select the wrapping program Press the start button The machine rotating around the load makes the winding and stops at end of cycle Cut the film manually Please note that the machine has a driving wheel side wheel to be placed in contact with the load, if the load surface or irregular shape must assess the suitability. Max height of load:mm 2000 Integrated charger:220V Autonomy:100 pallets Dimensions:mm 700 x 1500 x 2250 h Weight:Kg. 250

Special sealers ME 455/605 VAD with air suction system (max 80%) suitable for volume reduction and better preservation of products. The machine is equipped with a double sealing bar with a sealing width of 5 mm, an electric pedal drive and pneumatic cylinders, mobile nozzles for air intake, an adjustable timer for suction, sealing and cooling. The ME 4510/6010 VAG model with a ATM gas injection system is also available. This variant is equipped with a double sealing bar with a 10 mm sealing width, electric pedal drive, mobile nozzles for air intake and gas injection, adjustable timers for suction, intake, sealing and cooling. Max. seal length:mm. 450/mm. 600 Seal width:mm. 5 Sealable materials:PE-PP-AL/PE

Sealer machine with quick closing lever for sealing bags in plastic material heat-sealable, with impulse sealing (resistance heats in a few seconds) and timer for adjustment. The welding cycle is indicated by an indicator light. The double sealing bar (top and bottom) with welding of 10 mm allows the closing of envelopes with high thickness, coupled bags and bellows. Through a selector switch, you can choose whether to use one or two welds. The maximum thickness of weld is 0.25 mm x 4 (total 1 mm). Model:ME 3010 FH Max. seal length:mm. 310 Seal width:mm. 10 Dimensions:mm 420x370x270 h Weight:Kg. 12

New packaging system that creates air cushions on the spot. Fast, cheap and sile - The cushioning machine AIR BAG FP 600 G is compact and silent and allows you to create air cushions for packaging. It is suitable for use in the food, pharmaceutical, farm and wine industries and wherever it is necessary to pack fragile products such as glass jars, bottles and fragile products. Speed:0-20 m/min Cushions width:mm. 200-400 Film thickness:20 micron Sealing temperature:90-150°C Absorption:450W

The electric sewing machines for bags series FPGK are reliable and economical. Recommended for production up to about 400 to 500 bags per day, can be easily handled and transported to various sewing locations. Simple and compact, are equipped with a structure in aluminum alloy and plastic of high quality and mechanical parts in steel. Staplers are suitable to close sacks made of jute, paper, fabric, plastic and network for sewing fabrics, nets for agriculture, cartons, etc. The material you can sew, if different from those listed must be low density (to avoid breaking of the needles). The standard model comes with 220 Volt and is equipped with kits transformer 12V / 220V, backpack, batteries and chargers. The transformer 12 volt / 220 volt is oversized and equipped with all the safety measures necessary to the safe operation and long-lasting equipment. Safety devices include: battery alarm, battery low shutdown, overload and overheating. The backpack allows you to move comfortably. Example model:FPGK 2701 B Sewing speed:10 m/min Daily bags:400/500 Material thickness:up to 8 mm Sewing-border span:mm 55 Stitch lenght:mm 4-9 Transport:Reciprocating Point:chain

Skinpack packing machine at semiautomatic cycle to package objects of either small, medium or large size, between cardboard and transparent plastic film. The skinpack package allow immediate display of the product, possibility of both advertising in colour on the cardboard surfaces, practicality of the packaging, which can be hung in showcases. Safety protection with sensors. The cardboard support can be replaced with a sheet of bubble wrap (bubble polyethylene). CE-approved machine with low voltage controls, electrical panel with Siemens PLC, safety module (Pilz), safety protection on the work area with safety sensor (the movement of the frame descent only occurs with closed protection, the movement of ascent is driven by a dual control). The packaging machine mod. FP-390 has a limited energy consumption as the resistors are activated only at the time of packaging (on the other Skinpacks the resistances are always on) and there is no risk of overheating. Working surface sizes:mm. 540 x 390 Max. package height:mm. 140 Film roll width:mm. 450 Power max:Kw 6 Power supply:380 V 3PH machine size :mm.1500 x 600 xh1350

Automatic banding FP TZ 888 simple and inexpensive, using paper and polypropylene tapes 30 mm. width. Maximum useful sizes mm. 240x140 h. (lenght unlimited). Speed up to 25 cycles per minute. The tape's tension is adjustable by knob. Manual or automatic operation. The banding FP TZ 888 in addition to the classic use in graphic arts, binders, paper industries, is particularly suitable for the realization of multi-packs or for the matching of multiple products in sales promotions. Useful dimensions:- Width from 40 to 240 mm. - Height from 5 to 140 mm - Lenght from 50 mm. to unlimited Max speed:25 cycles/min. Tape width:mm 30 Electric Supply:220V - 50 Hz - 150W

Mechanical eyeletting machine with double heads for 9 mm eyelets, 7 mm, type 051 - Eyeleting with mechanical pedal, double head with automatic feeder and support frame, suitable for any process where it is required the simultaneous closing of the two eyelets. The eyeletting is applied in the paper converting industries, offices bank or post office, anywhere where there is a need to securely seal their products but use is higher in the food industry for sealing and the simultaneous application of cards printed on plastic bags. Steel painting base plate:mm. 360 x 500 Usable eyelets:type 7-9-050-051 Distance between heads:from mm. 40 to mm. 200

FP 15 SE STRETCH-WRAPPING MACHINE with electronic board and digital keyboard, inverter to control the progressive start and turntable rotation speed, 4 wrapping programs, electromagnetic clutch for film tension control, photocell for automatic reading of the pallet height, manual hook up/cutting of the film, and automatic wrapping cycle (CE-standard). Max load capacity:Kg. 2000 (3000 kg with optional) Turntable diameter:mm. 1500 Max pallet dimensions:mm. 1000 x 1200 Max pallet height:mm 2200 h (3000/3200 mm with optional) Turntable rotation speed:4 - 7 rpm Turntable height:mm. 75 Installed power:Kw 0.6 machine size :mm. 1500 x 2500 x 2550

Vacuum packaging machine large with two perpendicular sealing bars and stainless steel construction (AISI 304), with digital panel and volumetric electronic sensor for constant vacuum control. Using the short sealing bar can package products with lengths up to 820 mm. Instead using the long bar can be made more packages with a max lenght of 520 mm. The vacuum pump 40 m³/h. ensures a high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Number of bars :2 Sealing bars length:mm 500 + mm 760 Work cycle:about 30 sec Vacuum pumps:40 m³/h Useful width :mm 820 Useful lenght:mm 530 Useful height (chamber + lid):mm 120/190

D-FPWR BOTTLES - SEMI-AUTOMATIC LABELING MACHINES FOR ROUND PRODUCTS Semi-automatic applicator for rolls of self-adhesive labels with maximum width mm 200/300 on bottles and cylindrical products with a diameter of mm 20 to mm 130 Main features: - Sturdy construction in steel and aluminum - Motorization of the product rotation roller and the drawing of the labels by means of stepper motors with variable speed and electronically synchronized - Microprocessor management electronics with storage of 40 working formats - Possibility to apply a wraparound label or front/back label and also with a different size with adjustment of the distance between the two programs - Maximum label width mm 200/300, and maximum coil diameter 300 mm - Change of format extremely simple and fast Model:D-FPWR Roll diameter:300 mm Core diameter:38-110 mm Supply Voltage:230 Vac-50Hz Power consumption:200W Overall dimensions:800x500x400 (H) Weight:Kg 25