Produse pentru masini (869)

Rebar shearing machine for fast bars cutting. Cutting antirepetitiveness system. Capacity 1 bar Ø 32 mm 90 cuts/minute Cuts per minute:30 Installed power:2.2 kW Machine's weight:330 kg (730 lb) Machine dimensions:53x92x72(h)cm (21"x36"x28"h)

Stirrup bender and bar shaping machine from coil with 2 bending heads, allows to produce stirrups and shaped wires with bends at both ends using wires up to Ø 25 mm (#8). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 160 m/min (525 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit Automatic motorized wire change Automatic adjustable wireguide Web Teleassistance Prestraightening Feeding Unit (Optional). Processed wire type:Coil Single strand:1 Ø 10÷25 mm (#8) Double strand:2 Ø 10÷20 mm (#6) Pulling speed:160 m/min (525 ft/min) Bending speed:585°/sec Average power consumption:10 kWh

FILTRO a 8 CARTUCCE "CS CF8" - MACCHINE Superficie filtrante m²:80 Portata aspiratore m³/ora:7000 Diametro cartuccia:325 mm Altezza cartuccia:600 mm

Coil Mover is a safe and compact clamp for unloading trucks and handling coils in the factory. Thanks to its innovative shape, it allows the hooking of the rewinded coils from the inside. Coil internal diameter:550÷900 mm (22"÷35") Max. lifting weight:5000 kg (11000 lb)

Rotor type wire straightening machine for the production of cuttosize wires up to Ø 8 mm (0.315 in.). Driven by digital electric servomotors. Max pulling speed 160 m/min (525 ft/min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm). Fixed cut with automatic backstop length for a maximum cutting flexibility (± 0.5 mm). Rotating cut system with automatic measurement via encoder for higher productivity (± 0.5 mm/m). Single strand:1 Ø 3÷8 mm (0.315 in.) Pulling speed:160 m/min (530 ft/min) Average power consumption:4 kWh

FILTRO a 8 MANICHE "CM" - MACCHINE Maniche (numero):d-200x1820 n° 8 Superficie filtrante m:9 c.a Portata m3/h:2.160

The rotor type wire straightening machine RI 12 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 4mm to Ø 12mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market. Available versions RI 12/ML The manual setting of the mechanical lengthstop will enable processing wires with a bar length accuracy of ±0,1 mm. This newly designed contactless lengthstop enables to action the cut without the conventional

Camera di granigliatura con rivestimento antiabrasivo; Porta automatica; Turbine; Valvole erogazione abrasivo; Elevatore a tazze; Separatore pulizia abrasivo pneumatico; Quadro elettrico; Impianto elettrico a bordo macchina; Impianto pneumatico; Barriera di fotocellule per le porte automatiche; n°6 ganci portata 500kg Giri turbina:2925 Potenza motore turbina:7,5 Passaggio utile per introduzione pezzi:900x1400 Potenza gruppo aspirazione polvere:5,5 Aspirazione necessaria:ca. 5000 Potenza totale installata:18.5 Portata ganci (nr.6):500

POSSIBILITA’ DI NOLEGGIO OPERATIVO FINALIZZATO ALL’ACQUISTO (“RENT TO BUY”): non crea una complicata gestione di cespiti patrimoniali e non impatta né sul ricalcolo IRAP né sugli studi di settore si hanno costi certi per tutta la durata contrattuale con possibile opzione di acquisto a prezzo prestabilito ora per allora non si hanno “esposizioni bancarie” in quanto il rapporto è di tipo commerciale privato tra fornitore e cliente Giri turbina:2910 Potenza motore turbina:15 Passaggio utile per introduzione pezzi:1600(l)x800(h) Potenza motore nastro:2,2 Potenza gruppo aspirazione polvere:15 Aspirazione necessaria:ca.16000 Potenza totale installata:ca.95

Ring bending machine for rings of unlimited radius (rib rings) and spirals. Driven by a variablespeed electric motor min 20; max 30 rpm. Adjustable bending radius from a minimum 15 cm (with small diameters) and over. For Ø 6 mm (#3) Ø 32 mm (#10) wires. Bending capacity:6÷32 mm (#3÷#10) Plate revolving speed:20-30 rpm Installed power:1.8 kW Machine's weight:320 kg (705 lb) Machine dimensions:80x70x94(h)cm (31"x28"x37"h)

Bidirectional automatic stirrup bender for the production of stirrups and shaped wires both from bars (up to Ø 22 mm #7) and from coils (up to Ø 16 mm #5). The lower bending unit performs downward bends. Driven by electric servomotors. These automatic stirrup benders are equipped with Max. pulling speed 100 m/min (330 ft/min) External and internal straightening unit Semiautomatic cycle for shaped wires with bends on both ends Barholding clamp for downward bends Virtual mandrel for the upper processing unit Web Teleassistance Processed wire type:Coil Pulling speed:100 m/min (330 ft/min) Bending speed:685°/sec Average power consumption:2 kWh

Stirrup bender and bar shaping machine from coil with 2 bending heads for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 16 mm (#5). Driven by electric servomotors. Also available HS version machine. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 140 m/min (460 ft/min) HS Version 200 m/min (660 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick AntiTwist electronic device (Optional) Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit (upper and lower) 4 pulling drive wheels Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance 3D version for the production of tridimensional pieces. Processed wire type:Coil Single strand:1 Ø 6÷16 mm (#5) Double strand:2 Ø 6÷13 mm (#4) Pulling speed:140 m/min (460 ft/min) Bending speed:1680°/sec Average power consumption:5 kWh

Automatic mesh bending machine, equipped with double gearmotor, fast fitting pins and switch for 3 mechanical programs. It is equipped with Reinforced framework; Bending pin holder; Adjustable mobile bending bar (minimum length 70 mm);

Four speed dualdirection bar bending machine. It doesn't pull the bars during bending operations. Driven by digital electric servomotors. Industrial PC equipped with touch screen graphic display 8'', which allows Programming stirrups and shapes with up to 30 bends; Adjusting bending angles; Storing up to 100 different shapes. Plate revolving speed:12 rpm Installed power:14 kW Machine's weight:1250 kg (2760 lb) Machine dimensions:157x104x87(h)cm (62"x41"x34"h)

The rotor type wire straightening machine RI 8 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 3mm to Ø 8mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market. Available versions RI 8/ML The manual setting of the mechanical lengthstop will enable processing wires with a bar length accuracy of ±0,1 mm. This newly designed contactless lengthstop enables to action the cut without the conventional

Stirrup bender and bar shaping machine from coil with 2 bending heads for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 20 mm (#6). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 140 m/min (460 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick AntiTwist electronic device (Optional) Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit (upper and lower) Pulling with 4 motors and 4 pulling drive wheels Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance Prestraightening Feeding Unit (Optional) Automatic motorized wire change (Optional) 3D version for the production of tridimensional pieces. Processed wire type:Coil Single strand:1 Ø 8÷20 mm (#6) Double strand:2 Ø 8÷16 mm (#5) Pulling speed:140 m/min (460 ft/min) Bending speed:840°/sec Average power consumption:8 kWh

FILTRO a 84 MANICHE PROMECO - MACCHINE Maniche (sezione & numero):d.190x2000 A-C - n° 84

Machine for the assembly of the (EPS) polystyrene sheet shaped to two external electrowelded mesh. The assembling machine welds the vertical connectors to the two external mesh, producing the prefabricated sandwich panel. This way it is possible to produce all types of insulated panels single panels, double panels and floor panels of different thicknesses, ideal for the construction of residential, commercial and industrial buildings.

Camera di granigliatura rivestimento antiabrasivo, Porte automatiche, Turbine, Valvole erogazione abrasivo, Elevatore a tazze, Vaglio rotante, Separatore pneumatico, Quadro elettrico, Impianto elettrico a bordo macchina, Impianto pneumatico Diametro massimo grappolo:2000 mm Altezza massima grappolo:2500 mm Portata massima ganci/paranchi:2000 kg Diametro turbine:360 Potenza motore turbine:11 kw Tipologia separatore:Pneumatico

Electromechanical mesh cutting machine. It cuts in two directions thanks to the two kW 3 cutting motors, a kW 0.75 press motor and a kW 0.55 feeding motor. It is equipped with Reinforced framework; Continuous shear cutting unit; Rubber inlaid meshpressing beam.

Rulliera motorizzata, coclee di recupero abrasivo, selezionatore rigenera abrasivo, soffiante, spazzolone, filtro depolveratore, quadro elettrico. Larghezza rulliera:3000 mm Altezza passaggio:650 mm Passo rullii:800 mm Potenza motore turbine:22 kW Potenza totale installata:202 kW

Electromechanical automatic bar cutting bench with 5 transfer roller tracks and a second additional rebar conveyor. Thanks to the second transfer track, parallel to the cutting unit, cutbars can be placed along the whole length of the roller track optimizing the use. This means that the same roller track can be used to store different orders. Basically, it is as if you had a much greater number of roller tracks allowing a better cutting optimization thus reducing the quantity of scraps. The bar cutting bench "OPTIBAT 5" represents the ideal solution for those working large numbers of smallsized orders and it is especially designed for civil housing. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance. Cuts per minute:30 Pulling Speed:115 m/min (380 ft/min) Pulling Speed (Brushless):160 m/min (530 ft/min) Average power consumption:3 kWh

FILTRO a 30 MANICHE "CS HF30" - MACCHINE Maniche (numero):d-120x1850 n° 30 Superficie filtrante m²:20 Portata m3/h:3000

Electromechanical automatic rebar cutting bench with 3 transfer roller conveyors. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance. Cuts per minute:30 Pulling Speed:115 m/min (380 ft/min) Pulling Speed (Brushless):160 m/min (530 ft/min) Average power consumption:3 kWh

Cage making machine for the production of cylindrical cages with variable pitch welded spiral wrap; max cage Ø 1100 mm. High productivity and flexibility is guaranteed by the configuration of the machine and by the fully automatic welding unit SAF 3000. With the machine to produce cylindrical poles CM PRO 1100 is also possible to produce on the machine square or rectangular cages and cages with the bars bent on the end (90 °bends, bottle necks and pointed). Min. cage Ø:200 mm (8") Max cage Ø:1100 mm (43") Max cage's weight:3 t (6600 lb) Max cage's length:16 m (52') Wire spiral Ø:6÷16 mm (#3÷#5) Spiral pitch:0÷500 mm (20") Longitudinal bars Ø:12÷32 mm (#3÷#10) Average power consumption:5 kW/h

Camera di granigliatura Rivestimento antiabrasivo Porta automatica Turbine Valvole erogazione abrasivo Coclea Elevatore a tazze Separatore pneumatico Gruppo girapezzi Piattaforma d'ispezione Ganci Quadro elettrico Impianto elettrico a bordo macchina Impianto pneumatico Inverter motori turbine Filtro atex con spegnimento automatico incendio a CO2 Insonorizzazione vano turbine Diametro massimo grappolo:1500 mm Altezza massima grappolo:2000 mm Portata massima ganci/paranchi:500 kg Diametro turbine:360 mm Potenza motore turbine:7.5 kW Potenza totale installata:45.6 kW Portata filtro:10000 m³/ora

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 36 mm (#11) Plate revolving speed 8 RPM Plate revolving speed:8 rpm Installed power:2.2 kW Machine's weight:387 kg (850 lb) Machine dimensions:80x89x86(h)cm (31"x35"x34"h)

Multirotor wire straightening machine using coils up to Ø 20mm for the production of straight bars. 4 wheel drive pulling unit driven by servomotors for high speed production; Maximum pulling speed 140 m/min; The straightening system uses rotors, each one dedicated to a single bar diameter which guarantees perfectly straight bars and wire diameter changes in just a few seconds; Servomotor driven cutting unit guarantees high speed and high cutting accuracy; Twin Version (Optional) with double cutter, double channel, double pulling unit it allows the processing of two bars simultaneously, doubling the productivity of the machine. Lista Bar wire straightening and cutting machine can be equipped with Bundle aligning device on the ground with vibrators (Optional); Indexing carriage for the automatic collection and sorting of the bars produced (Optional); Storage rack pneumatically operated (Optional). Single strand:1 Ø 6÷20 mm (#6) Pulling speed:140 m/min (460 ft/min) Average power consumption:15 kWh

Mesh welding machine for the production of electrowelded mesh fed by wires. The automatic wire mesh welding machine can manufacture electrowelded mesh from prestraightened wire, both longitudinal and transversal. The mesh maximum width is equal to 1250 mm, the length is variable between 2000 mm and 6000 mm. These electrowelded mesh are used for the production of prefabricated sandwich panels.

Filtro depolveratore a maniche a scuotimento meccanico, soffiante, rulliera di carico e rulliera di scarico Giri turbina:2940giri/minuto Potenza motore turbina:15kW cad Passaggio utile per introduzione pezzi:2200x750mm Potenza motore rulliera:3kW Potenza gruppo aspirazione polvere:11kW Aspirazione necessaria:14.500m3/h Potenza totale installata:102,5kW Portata rulliera:1000kg