Produse pentru masini (869)

Macchina Caffe' B.ca-fap-fastback 802 Point

1 LEVETTA 450x460x450 2,5 L 29,5 Kg 1400 W 220-240 Vac 1N 50-60 Hz Manual portion control lever Bodywork all stainless steel or with painted iron – stainless steel water / steam wand Water tank capacity 3 L Possibility to be used with tank or be connected directly to a water supply Warning lack of water in the tank or boiler water level Thermosiphon system – volumetric pump with balanced bypass

3 AUTOMATIC 900x540x455 20,5 L 83 Kg 5000 W 220-240 Vac 1N 380-415 Vac 3N 50-60 Hz Manual portion control Side / back panel in stainless steel Stainless steel steam and water wands Copper boiler (Cu 99.5) with anti-oxidation treatment Compatible with tall cups (optional: support grid for espresso italiano cups)

2 compact AUTOMATIC 650x545x520 6,0 L 49 kg 2500 W 220-240 Vac 1N 50-60 Hz Automatic coffee and hot water portion control Bodywork all stainless steel with painted iron parts (black / white / red) Stainless steel steam and water wands Coffee pre-infusion system and thermosiphon system Copper boiler (Cu 99.5) with anti-oxidation treatment The drip tray can be set on two different levels to accommodate different size of cups / glasses

2 SEMIAUTOMATIC 725x545x520 13,5 L 60 kg 3000 W 220-240 Vac 1N 380-415 Vac 3N 50-60 Hz Automatic coffee and hot water portion control Bodywork all stainless steel with painted iron parts (black / white / red) Stainless steel steam and water wands Coffee pre-infusion system and thermosiphon system Copper boiler (Cu 99.5) with anti-oxidation treatment The drip tray can be set on two different levels to accommodate different size of cups / glasses

2 SEMIAUTOMATIC 4.725,00 € 725x540x455 13,5 L 67 Kg 3000 W 220-240 Vac 1N 380-415 Vac 3N 50-60 Hz Manual portion control Side / back panel in stainless steel Stainless steel steam and water wands Copper boiler (Cu 99.5) with anti-oxidation treatment Compatible with tall cups (optional: support grid for espresso italiano cups)

Macchina Caffe Vera 2 AUTOMATI 2 LEVETTA 900x620x500 11,5 L 68,0 Kg 3000W 220-240 Vac 1N 380-415 Vac 3N 50-60 Hz Automatic coffee and hot water portion control Display touch to manage all the machine functions Side panel in plexiglass with customizable colors / pictures Coffee pre-infusion system and thermosiphon system Copper boiler (Cu 99.5) with anti-oxidation treatment The drip tray can be set to four different high levels MULTIBOILER VERSION Services boiler (water / steam) in copper 10 L – 2000W Independent group temperature adjustment Independent copper boilers of 0.9 L on each group – 1100W each – driven by a P.I.D. thermostat which guarantees exceptional thermal stability in all working conditions and allows the operator to regulate the water temperature of each group independently, to achieve optimal extraction

2 LEVETTA 725x540x455 13,5 L 65 Kg 3000 W 220-240 Vac 1N 380-415 Vac 3N 50-60 Hz Manual coffee portion control lever Side / back panel in stainless steel Stainless steel steam and water wands Copper boiler (Cu 99.5) with anti-oxidation treatment Compatible with tall cups (optional: support grid for espresso italiano cups)

2 Multiboiler 795x575x560 10 L + 2 x 0.9 L 75 kg 2000 W +2200 W Automatic coffee and hot water portion control With display to view alarms, drinks and operative functions Painted iron side / back panel (WHITE or MATT BLACK) with stainless steel finishes Stainless steel steam and water wands Coffee pre-infusion system and thermosiphon system Copper boiler (Cu 99.5) with anti-oxidation treatment Compatible with tall cups (optional: support grid for espresso italiano cups)

1 LEVETTA 235x430x395 1,5 L 19 kg 1100 W 220-240 Vac 1N 50-60 Hz Manual portion control lever Bodywork all stainless steel or with painted iron - stainless steel water / steam wand Water tank capacity 2.2 L Warning lack of water in the tank or boiler water level Thermosiphon system

Stirrup bender and bar shaping machine from coil with disk bending system for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 14 mm (#4). Driven by electric servomotors. This automatic shaping and stirrup bender from coil is equipped with Max. pulling speed 150 m/min (500 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick Disk bending unit Cutting with Brushless motors Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance Processed wire type:Coil Single strand:1 Ø 6÷14 mm (#4) Double strand:2 Ø 6÷10 mm (#3) Pulling speed:150 m/min (500 ft/min) Bending speed:2345°/sec Average power consumption:4 kWh

The rotor type wire straightening machine RI 6 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 2,5mm to Ø 6mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market

Automatic plant for the production of calendered bars from Ø 12mm to Ø 40mm. The bars are automatically selected, positioned, transferred to the calendering machine, calendered and then unloaded without the need for operator intervention. The calendering center COMPASS 40 guarantees the insertion of the bars always oriented in the same way; automatic control of the bending radius; an automatic manufacturing process; greater safety for the operator. COMPASS 40 can operate in 3 ways Automatic with single bar it allows automatic feeding of the bar and electronic check of the produced bar bending radius; Automatic with multiple bars it allows the automatic feeding of the bars without checking the bending radius; Manual with the same features of a CER40 calendering machine. Bars calendering is mainly used in the construction of foundations for wind turbines or tunnels (those not made with prefabricated elements). Plate revolving speed:13-42 rpm Calendering wheel height:80 mm (4 Ø 20 mm) Min. calendering radius:2000 mm

Machine to cut (EPS) polystyrene blocks in sheets, useful for the production of precast sandwich panels. The machine cuts the blocks horizontally and vertically and obtains polystyrene sheets of different thicknesses and shapes.

The Combidrive MO is a cold rolling line with single horizontal drawing capstan for the production of smooth and ribbed wires in bars from Ø 4 to Ø 12 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Wire is rolled to reduce the section and if necessary ribbed, then straightened and cut according to the different lengths scheduled. Rotating cut system to ensure continuous production Max. pulling speed (straight bars production) 6 m/s Max. pulling speed (coil production) 8 m/s Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s) Number of pitches:2 Maximum speed:8 m/s Out wire Ø:4÷12 mm

Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 22 mm (#7). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces. Processed wire type:Coil Straightening capacity:1 Ø 8÷22 mm (#7) Bending capacity:2 Ø 8÷16 mm (#5) Pulling speed:120 m/min (400 ft/min) Bending speed:840°/sec Average power consumption:2 kWh

Cage making machine for the production of cylindrical cages with variable pitch welded spiral wrap; max cage Ø 2500 mm. High productivity and flexibility is guaranteed by the configuration of the machine and by the fully automatic welding unit SAF 3000. WIth the machine to produce cylindrical poles CM PRO 2500 it is also possible to produce on the machine square or rectangular cages and cages with the bars bent on the end (90 °bends, bottle necks and pointed).

COSER CS HM 1100x2000/3T - MACCHINE Diametro massimo grappolo:1100 mm Altezza massima grappolo:2000 mm Portata massima ganci/paranchi:500 kg Diametro turbine:330 Potenza motore turbine:7,5 kw Tipologia separatore:Pneumatico

Automatic double bending machine for bars up to Ø 50 mm (#14). It works automatically and bends any kind of shapes, positive and negative bends included. Version with automatic feeding and discharging units, which fold away (Optional) they allow the minimum distance of 980 mm between the two bending mandrels. Automatic system for bars feeding and discharging Ejection cylinder pneumatic ejector for shapes and mandrels to remove the tools from the toothed part the positions of the clamps and guides on the kick off arms and their adjustment are motorized and automatic Operation by means of digital electric servomotors 4 adjustable bending speeds Bending speed:72°/sec Average power consumption:2 kWh

Bidirectional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cuttosize bars using wires up to Ø 32 mm (#10). Driven by digital electric servomotors. Bar Wiser 32 bar shaping machine are equipped with Max. pulling speed 180 m/min (600 ft/min) 2 bending units (upper and lower) Clamp for extraction of the end part of the bar Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) Processed wire type:Bar Single strand:1 Ø 10÷32 mm (#10) Double strand:2 Ø 10÷22 mm (#7) Pulling speed:180 m/min (600 ft/min) Bending speed:450°/sec Average power consumption:3 kWh

non crea una complicata gestione di cespiti patrimoniali e non impatta né sul ricalcolo IRAP né sugli studi di settore si hanno costi certi per tutta la durata contrattuale con possibile opzione di acquisto a prezzo prestabilito ora per allora non si hanno “esposizioni bancarie” in quanto il rapporto è di tipo commerciale privato tra fornitore e cliente Potenza motore nastro:1,1kW Potenza gruppo aspirazione polvere:3kW Aspirazione necessaria:ca.3000 Potenza totale installata:ca.15kW

Elevatore a tazze, Coclee di recupero abrasivo, Selezionatore rigenera abrasivo, Quadro elettrico Industria 4.0. Modello:BOMB8 Matricola:192/18 Anno:2018 N° Turbine:8 Potenza motore Turbine:15kW Totale potenza installata:130kW Velocità avanzamento bombole:1.5-9m/min Produzione oraria:300 bombole

non crea una complicata gestione di cespiti patrimoniali e non impatta né sul ricalcolo IRAP né sugli studi di settore si hanno costi certi per tutta la durata contrattuale con possibile opzione di acquisto a prezzo prestabilito ora per allora non si hanno “esposizioni bancarie” in quanto il rapporto è di tipo commerciale privato tra fornitore e cliente Giri turbina:2900rpm Passaggio utile per introduzione pezzi:1200(l)x500(h) Potenza motore nastro:1,5kW Potenza gruppo aspirazione polvere:15kW Aspirazione necessaria:12000m³/h Potenza totale installata:ca.125kW

Rulliera motorizzata, coclee di recupero abrasivo, selezionatore rigenera abrasivo, filtro depolveratore a cartucce, quadro elettrico. Larghezza bocca ingresso:1700 mm Altezza bocca ingresso:1350 mm Interasse rulli:600mm Lunghezza minaima pezzi:2500 mm Tipo Turbina:CS 380D Diametro turbine:380 mm Potenza motore turbine:7.5 kW Potenza totale installata:56 kW

FILTRO a 36 MANICHE "BANFI FSN/6" matr.3129 anno 1983 - MACCHINE Maniche (sezione & numero):d.125x1900 n° 36 Superficie filtrante:27 m2 Portata:3500 m3/h

Automatic dual directional stirrup bender for the production of stirrups from straight bars (up to Ø 22 mm #7) or coils (up to Ø 16 mm #5). Driven by electric servomotors. Bar Wiser 22N Multifeed automatic stirrup benders are equipped with Max. pulling speed 100 m/min (330 ft/min) External and internal straightening unit Virtual mandrel Web Teleassistance Processed wire type:Bar/Coil Pulling speed:100 m/min (330 ft/min) Bending speed:685°/sec Average power consumption:2 kWh

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 32 mm (#10) Plate revolving speed 9 RPM Plate revolving speed:9 rpm Installed power:1.5 kW Machine's weight:290 kg (640 lb) Machine dimensions:76x81x86(h)cm (30"x32"x34"h)

Machine used to reinforce the polystyrene insert (EPS) of the Reinforced Thermal Block. The machine inserts automatically the vertical wires and their connectors into the polystyrene core.

FILTRO a 120 MANICHE "CS HF120" - MACCHINE Maniche (numero):d-125x2540 n° 120 Aspiratore tipo:MZ tipo.RM500/R2

Electromechanical automatic rebar cutting bench equipped with 2 side folding pockets. MobiPocket allows the unloading and lateral discharge of bars greatly reducing the clutter. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance. Cuts per minute:30 Pulling Speed:115 m/min (380 ft/min) Pulling Speed (Brushless):160 m/min (530 ft/min) Average power consumption:3 kWh