Produse pentru masini (116)

Punch tools to work aluminium profiles Customized Production Single or Chain tools Holes, notches, bending Tool size up to 1.200 mm Power up to 800 KN

Quick change tool system Hydropneumatic intensifier Foot valve operated Max. power at 10 bar = 90 KN Stroke = 40 mm 25 Double strokes / min. Max. daylight = 250 mm Working range: ram to back wall = 130 mm Working range with turn table: ram to back wall = 90 mm Working height 950 mm

Alternativ mit Hand- oder Fuß- Ein/Ausschalter Verstellbarer Schleifbandwiderstand Nassschliffeinrichtung komplett mit Elektropumpe Die Maschinen sind geeignet zum Schleifen von Rohren mit kreisförmigem und elliptischem Querschnitt. Das Besondere ist, dass selbst gebogene Rohre auf diesen Maschinen geschliffen werden können. Eine Übertragungsbewegung auf die Antriebsrollen Eine Drehbewegung um die Achse des zu schleifenden Rohres Durch dieses System ist garantiert, dass das Werkstück auf der ganzen Oberfläche seines Umfangs geschliffen wird. Das Schliffbild entspricht der Körnung des verwendeten Schleiffilms. Durch die Verwendung von Schleifbändern Korn 40 bis Korn 800 ist ein großer Spielraum von Schliffbildern möglich, die je nach Einsatzzweck und Verwendung des Werkstückes gewählt werden können. Sämtliche drehend gelagerten Teile sind in geschlossenen Kugellagern gelagert, mit Fett geschmiert und mit geprüften Schutzeinrichtungen versehen. Die Schleifbänder können einfach und...

Gezeigte Maschine mit Unterständer, für sitzende Arbeitsweise, Absaugtrichter verstellbar und Frequenzumformer für stufenlose Bandschnittgeschwindigkeit Schleifbandlänge 2.500 mm (Normalausführung) Schleifbandbreite 5 - 75 mm (Normalausführung) Antriebsmotor 1,6/2,6 kW Antriebsscheiben von 100 - 225 mm Ø = 7,5 - 34 m/sec. Bandgeschwindigkeit (Normalausführung) Bandspannung mechanisch (Normalausführung) 3-Rollen-Bandumlenkung gewährleistet gleiche Bandgeschwindigkeit bei jedem Kontaktscheibendurchmesser, exakte Bandführung und einfache Bandregulierung. Bei Bandriss sofort ohne Antrieb, daher Ausschaltung der Unfallgefahr Kontaktscheiben von 12 - 300 mm Durchmesser (Sonderzubehör), große Auswahl an Schleifvorsätzen für jede gewünschte Oberflächenbearbeitung (Sonderzubehör) Wartungsfreie, staubdichte Kontaktscheibenlagerung mit Dauerschmierung, sowie Kontaktscheibenwechsel in weniger als 1 Minute Sicherheits-Bandverkleidung, Absaugtrichter (Sonderzubehör)

Quick change tool system Hydraulic operated Foot valve operated Max. power at 200 bar = 160 KN Stroke = max. 80 mm adjustable via limiter switch 14 Double strokes / min. Max. daylight = 250 mm Working range: ram to back wall = 130 mm Working range with turn table: ram to back wall = 90 mm Table dimension: 280 x 200 mm

The small bar feeder Samsys Smart impresses with its high performance in a very small space. The bar feeder is manufactured in Germany with first-class materials and components. The Samsys Smart guarantees long-term reliability. It impresses with its service and environmentally friendly design. It is an electro-pneumatic magazine. This means the feed is servo-controlled and the reloading mechanism is pneumatic. Due to the easy access to all parts it is extremely user-friendly. This makes it very simple to understand and easy to use. Set-up and changeover is possible within 2-5 minutes due to the well thought-out design. Further features are the smooth material feed, an optimal control and monitoring of the material feed, as well as the exact positioning of the bar without mechanical stop. Due to its design, the Samsys Smart requires very little floor space. A shifting unit to gain easy access to the reduction tube is standard in X-direction. max. Bar length:1200 mm Bar diameter round:5 - 65 mm Bar diameter Hexagonal:6 - 56 mm Bar change:7 - 15 s Shifting Device X-Axis:ca. 340 mm

Quick change tool system Hydraulic operated Foot valve operated Max. power at 260 bar = 400 KN Stroke = max. 80mm adjustable via limiter switch 20 Double strokes / min. Max. daylight = 300 mm Working range: ram to back wall = 200 mm Table dimension: 600 x 400 mm Quick change tool system

The Mini Shaft Loader allows you to load short shafts. The loading is done automatically. Do you have remnants of long bar feeder and would you like to process them? Or do you want to load very short shafts automatically? The MSL is the ideal complement for the Multi-3000 to load short shafts. It has a multi-profile loading prism. So you can load round and hexagonal material and all this without changing channels. Special profiles are possible on request. Impact-free recharging thanks to the exclusive recharging cycle. The recharging cycle is based on the patented recharging mechanism of the Multi 3000. After fast and precise bar removal, the material is gently placed on the loading prism. The Mini Shaft Loader is connected to the bar feeder. This takes over the power supply and control of the loading system. The material is fed via the slide of the loading magazine. Round profile:Ø 5-65 mm Hexagonal material:Ø 5-56 mm Square material:Option Wave length:40-250 mm* Bar feed:servo motor of the existing bar feeder * max. standard length 140mm. :Other lengths available as an option on request.

With the robot camera Eyes from OnRobot, the provision of image processing for almost all collaborative applications becomes easy and cost-effective. Eyes is suitable for the sorting of a large number of objects. For example for CNC machines with metal parts defined by their outer shape and many other pick-and-place applications where alignment is important. Calibration and part recognition with only one single shot takes only a few minutes. Programming is intuitive and fast. And with Eyes’ advanced, affordable 2.5D vision, you benefit from depth perception and the ability to stack parts without adding complexity. The simple one-system setup for all leading robot manufacturers comes with software that is easy to install and program. Even employees without a technical background can perform the setup. Calibration and part recognition with a single shot. Simply take an image of the work surface to calibrate the camera view. One image for each part you want the system to detect. Type of vision system:2.5D Minimum part size:10 x 10 mm or 15 mm diameter Supported applications:Recognition, Sorting Supported mounting options:Robots and External Reconfigurability with Attachment to the robot:12 configurations (4 x 3) Around the robot flange:0 – 90 – 180 – 270 (degrees) Alignments and tilt angles:0 – 45 – 90 (degrees) Processing time Typicall:0.5 s Repeatability of detection:< 2 mm Detection accuracy External mounting:Typically: 2 mm Detection accuracy Mounting on robot:Typically: 2 mm

Unloading machine Multi-3000 remove The Multi-3000 remove is an electro-pneumatically controlled automatic unloading machine. It is the ideal complement to the bar feeder Multi 3000 or the Multi 3000SL. With the Multi 3000 remove it is possible to unload finished parts from sub- or main spindle. The bars are unloaded by unloading tube, pneumatic gripper or also by collet chuck. After unloading, the bars are placed on a prism. From the prism the parts are transported to a deposit. A light barrier monitors the unloading process. The coating of the depositing surfaces enables a particularly gentle handling of the finished parts. Even parts such as piston bars can be unloaded without a scratch. The unloading tube is made of POM material. This also ensures gentle handling. Loading can be done via the main spindle and unloading via the sub spindle. It is also possible to load via the sub spindle and unload via the main spindle. Compatible with almost all types of lathes. Round profile:Ø 10 to 102 mm Profile material enveloping circle:10 to 102 mm Bar length:150 up to 1,200 mm other lengths on request Protection class:IP 54 Power supply:200 to 415 VAC Control voltage:24/5 VDC Keyboard, display:4 lines of 20 characters, withLCD backlight Bar feed:Servodrive Feed rate:± 0.2 mm Textured colours:RAL 9010 Pure white Textured colours:RAL 7012 Basalt grey

Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 22,5° and 135°. Realized with cutting lenght of 4000 mm (7650 mm with accessories), 5000 mm (9650 mm with accessories), 6000 mm (11650 mm with accessories). It is equipped with the system EC 700x. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged to connect a motorised belt conveyor.

The mobile robot ER Work from EasyRobotics is a compact robot station which can be used for handling work or CNC assembly. The ER Work is most often used in combination with the ProFeeder Compact. Here the ProFeeder Compact serves as a kind of parts store. In this case the ER Work loads and unloads the machine. Of course, the ER Work can also do its work alone in front of a CNC machine. Dimensions:692 x 560 x 1002 mm Weight:45 kg (without robot)

Quick change tool system Hydropneumatic intensifier Foot valve operated Max. power at 10 bar = 50 KN Stroke = 37 mm Max. daylight = 200 mm Working range: ram to back wall = 110 mm Swiveling table to use tools to manufacture holes for sash bars

Double mitre saw with a fixed unit on the left and the other one movable. Manual positioning of the movable unit. Pneumatic tilting of the heads (90°, 45° or 22,5°). The intermediate degrees can be obtainedby manually setting mechanical stops. Realized with cutting lenght of 4000 mm, 5000 mm, 6000 mm. It is equipped with the system EC 601. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged to connect a motorised belt conveyor.

A double head mitre saw with disappearing blades specifically studied for the tubular steel shapes. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 45° and 135°. It is equipped with the system TS 690. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Speed of rotation of the blades, variable by means of a frequency converter (inverter). Automatic shifting of the support plates of the profile once over the cutting cycle. Dynamic protection guards for a total covering of the cutting area. Blade lubrication cooling system with electric pump. Coolant liquid vat with extractable pump for vat cleaning. Cutting deepth stop device. Intermediate workpiece support automatically operating Mobile roller conveyor with pneumatic clamp for section support Compressed air treatment unit (filter/reducer/lubricator)

Base with hardened guides Hydraulic device; Motor 4,0 kW, 400 V, 50 Hz Operation panel to switch on/off single or multy head mode Foot pedal controlled C-formed stand, working range – ram to back wall 120 mm Daylight 280 mm, quick tool change Distance punch head to punch head min. 245 mm Punching power 60 / 120 kN, stroke 50 mm – stroke adjustable optionally Carriage with linear guides for manual adjustment in X-direction, with pneumatic clamps and positioning scale

The basis of short bar loader Multi 3000SL was developed in Switzerland. It was specially designed for turning machine types with a large distance between machine cover and spindle end. The bar feeder is supplied as standard with a Z-axis sliding unit to ensure free access to the Spindle Liner. This makes it easy to change the spindle insert tube. The Bar Loading Magazine is manufactured in Germany with first-class materials and components. The MULTI-3000SL guarantees long-term reliability. It impresses with its service and environmentally friendly design. It is also a fully electric and servo-controlled magazine. Due to the easy access to all parts it is extremely user-friendly. It is very simple to understand and therefore easy to operate. Due to the well thought-out design, set-up and changeover is possible within 2-5 minutes. The patented lifting mechanism guarantees an impact-free and fast loading cycle.

Base 3000 mm, with hardened guides in x-direction, 3.000 – 8.000 mm Electric device – operation via 2-hand safety control, setting mode to adjust drilling depth – key switch Drilling units with stand and linear guides in X-direction, shafts for manual adjustment of drilling height, working range 125 mm (drill to back wall), Positioning in X and Y direction by scale, Profile height max. 200 mm Either toothed drill chucks or multy spindle heads available Drilling units, motor 1,5 KW, 400 V, 50 Hz, 3000 r.p.m., pneumatic down feed max. 200 mm, hydraulic damped Drilling performance up to Ø 16 mm Zero-stop for X-direction mounted on left side of machine, adjustable 0 – 100 mm Table with pneumatic horizontal profile clamps

The AutoSAM 3.26 is an automatic bar feeder with hydrodynamic bar guidance. It is particularly suitable for connection to sliding headstock lathes (Swiss-Type). Its field of application is in small, medium and large series. Its big brother is the bar loading magazine AutoSAM 3.51. The bar feeder has a calibration-free material clamping which is carried out by collets. This saves time for material change due to the automatic centric positioning. Four clamping jaws ensure maximum hold while the collet is being pulled onto the bar. The Mitsubishi PLC control system with PC board ensures extreme process reliability and simplifies communication with the lathe. Compatible with almost all types of lathes. For example Citizen, Star, Nomura, Mazak, Okuma, DMG Mori, SMEC, Doosan, Nakamura, CMZ, Takamaz and many more. Size Model 22:bar length 2200 mm Size Model 25:bar length 2500 mm Size Model 27:bar length 2700 mm Size Model 32:bar length 3200 mm Size Model 37:bar length 3700 mm Size Model 44:bar length 4400 mm Diameter model 12:Ø 3 – 12 mm Diameter model 16:Ø 3 – 16 mm Diameter model 20:Ø 3 – 20 mm Diameter model 23:Ø 3 – 23 mm Diameter model 26:Ø 3 – 26 mm Loading capacity Material Rack:260 mm Ø10 mm x 26 pcs/pc.

The AutoSAM 3.51 is an automatic bar feeder with hydrodynamic bar guidance. Its field of application is in small, medium and large series. Just like its little brother, the Bar loading magazine AutoSAM 3.26, it is well suited for connection to sliding headstock lathes (Swiss type). The bar feeder has a calibration-free material clamping which is carried out by collets. This saves time for material change due to the automatic centric positioning. The Mitsubishi PLC control system with PC board ensures extreme process reliability and simplifies communication with the lathe. Compatible with almost all types of lathes. For example Citizen, Star, Nomura, Mazak, Okuma, DMG Mori, SMEC, Doosan, Nakamura, CMZ, Takamaz and many more. The loading magazine has a control panel with function display, which is used for the settings of the machine. Multilingual menu navigation and error messages are included as standard in the display. Size Model 25:bar length 2500 mm Size Model 32:bar length 3200 mm Size Model 37:bar length 3700 mm Material diameter round:Ø 5 – 51 mm Loading capacity Material Rack:305 mm Ø10 mm x 30 pcs.

The short bar loading magazine Multi 3000 was developed in Switzerland. Manufactured in Germany with first-class materials and components. The MULTI-3000 guarantees long-term reliability. It impresses with its service and environmentally friendly design. It is also a fully electric and servo-controlled magazine. Easy access to all parts makes it extremely user-friendly. It is very simple to understand and therefore easy to operate. Set-up and changeover is possible within 2-5 minutes due to the well thought-out design. The patented lifting mechanism guarantees an impact-free and fast loading cycle. Further features are the smooth material feed, an optimal control and monitoring of the material feed, as well as the exact positioning of the bar without mechanical stop. Due to its design, the Multi 3000 does not require a shifting device to change the Spindle Liner. A shifting device is optionally available in X- and Z-axis and in different lengths. max. Bar length:1240 mm ; 1640 mm Bar diameter round:5 - 100 mm Bar diameter Hexagonal:5 - 85 mm Bar diameter square:optional Bar change:11 - 22 s

The spindle extension SamSpindle, has been specially designed for the extension of lathe spindles. Together with the bar feeder Multi 3000 it forms a safe, clean and efficient solution. The SamSpindle operates oil and air free. There is no mechanical connection to the lathe. Only a minimum of moving parts and masses. These are: the rotating bar, the guide rings and the inner cage of the ball bearings. The guide rings mounted in the roller bearings keep the bars in the centre of the SamSpindle cartridge. Thanks to this technique, round or test bars can be rotated at high speed, ensuring remarkably smooth running. You can turn drawn, round or profile bars, with correct straightness, at the maximum spindle speed of the lathe. This allows us to guarantee workpieces with high precision. The SamSpindle spindle extension offers maximum safety. It does not allow access to parts in motion. The moving parts are all enclosed in the SamSpindle cartridge, which is closed by a safety nut. Material diameter round:15 - 65 mm Material diameter hexagonal:13 - 56 mm

The cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agents from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil. height:88,90 cm Length:61,59 cm Depth:61,59 cm

PRÄZISIONSFLACHSTAHL MIT BEARBEITUNGSAUFMASS 505 mm TOLERANZ Dicke:+ 0,20 / 0 mm TOLERANZ Breite:+ 0,40 / 0 mm TOLERANZ Länge:+ 5 / 0 mm OBERFLÄCHE geschliffen:N7 Ra 1.6 OBERFLÄCHE vorgeschliffen, feingefräst:N8 Ra 3.2 OBERFLÄCHE gesägt:N15 Ra 25 Anlieferzustand:weichgeglüht 900N/mm² (280HB max.) Farbcode:1.3247 SILBER-ROT Erzielbare Härte:Hrc 67

PRÄZISIONSFLACHSTAHL MIT BEARBEITUNGSAUFMASS 1005-1030 mm TOLERANZ Dicke:+ 0,20 / 0 mm TOLERANZ Breite:+ 0,40 / 0 mm TOLERANZ Länge:+ 5 / 0 mm OBERFLÄCHE vorgeschliffen, feingefräst:N8 Ra 3.2 OBERFLÄCHE gesägt:N15 Ra 25 Anlieferzustand:weichgeglüht 9000N/mm² (265HB max.) Farbcode:1.4112ROSA Erzielbare Härte:Hrc 59

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container. height:approx. 112,6cm Diameter:approx. 56cm

Oil mist separator – extraction systems for vapours Oil mist separators are a must in order to ensure the extraction of oil mist from machine tools. With AOF filters we offer a whole series of extraction systems for effective extraction and filtration. The separator can filter emulsion mist, oil mist, smoke and odours. Oil mist filters can be installed on almost all turning machines– and milling machines and BAZ. In this way you can offer a healthy working environment for you and your employees. Heat and odours are effectively filtered and the emulsion separated from the exhaust air can be reused. The filters of the oil mist separators are equipped with multi-stage filtration. The elements are cleanable and reusable. Harmful emissions, dust and aerosols are removed from the air at almost 100%. Motor:0.2kW capacity:11 m³ /min (660 m³/h) Noise level:60 db (A) Air inlet:Ø 150 mm

PRÄZISIONSFLACHSTAHL MIT BEARBEITUNGSAUFMASS 1005-1030 mm TOLERANZ Dicke:+ 0,20 / 0 mm TOLERANZ Breite:+ 0,40 / 0 mm TOLERANZ Länge:+ 5 / 0 mm OBERFLÄCHE vorgeschliffen, feingefräst:N8 Ra 3,2 OBERFLÄCHE gesägt:N15 Ra 25 Anlieferzustand:weichgeglüht 835N/mm² (260HB max.) Farbcode:1.2767 BRAUN Erzielbare Härte:Hrc 54 - 58

PRÄZISIONSFLACHSTAHL MIT BEARBEITUNGSAUFMASS 1005-1030 mm TOLERANZ Dicke:+ 0,20 / 0 mm TOLERANZ Breite:+ 0,40 / 0 mm TOLERANZ Länge:+ 5 / 0 mm OBERFLÄCHE vorgeschliffen, feingefräst:N8 Ra 3.2 OBERFLÄCHE gesägt:N15 Ra 25 Anlieferzustand:weichgeglüht 640N/mm² (190HB max.) Farbcode:1.1730 ROT Erzielbare Härte:Hrc 56-57

4 axis CNC floor-type vertical spindle machining center. 4 axis (X, Y, Z, A) managed by CNC. By means of dedicated tools it’s suitable for working on 5 sides of aluminium, PVC and steel sections. The work pieces are held by means of 4 pneumatic vices on the mobile beam, that can be positioned on any angle between +125° and -125°. The rotation is directly managed by the control cycle. It offers a high programming functional capacity by using a three-dimensional graphics software. Electro-welded base designed to grant maximum rigidity and functional capacity of use. The axis slide on precision profile guides with ball recirculation and are driven by motors operated with digital systems. The vices slide on ball recirculation screws, and can be positioned manually by referring to a mm-scale and a laser pointer. By using the disc cutter it is possible to carry out end-milling operations on both the ends of the work piece (end-milling cycle). Milling operations can be performed with...