Produse pentru imagine (85)

Un diagnostic thermique pour les procédés continus métallurgie/plastique/verre - Images thermiques détaillées basées sur 40000 points de mesure par seconde Détection rapide et automatique des déplacements et des ondulations des bords, des trous et des déchirures Contrôle précis de la température du film pour une adhésion optimale sur le substrat Contrôle et archivage dans le cadre ISO 9000 Amélioration de la qualité et du rendement Réduction des rebus Surveillance automatique Visualisation par l‘ordinateur Communication Ethernet TCP/IP (sur l‘appareil) 3 sorties 4 – 20 mA Alarmes indépendantes du PC Modules de sorties analogiques ou numériques Serveur OPC pour intégration au système de contrôle de ligne Logiciel multi-langues APPLICATIONS Métal - Laminage, coulées continues, revêtement et peinture Plastique - Extrusion de feuilles et de film, stratification, transformation Verre - Bain & étenderie (verre flotté), production de laine de verre Papier - Revêtement, stratification, séchage des cartons ondulés Résolution optique:200:1 max (90 % énergie) Températures de mesure:20 à 1200 °C Angle de balayage:90° Points de mesure par ligne:1024 Fréquence de ligne:150 Hz max Température ambiante:0 à 50 °C, avec refroidissement par eau à 180 °C Interface:Ethernet TCP/IP (100 Mbit/s), OPC, DDE, module de sortie analogique/ numérique, RS485

IR-Zeilenscanner-Wärmebildsystem überwacht Extrusionsprozesse kontinuierlich - Das Wärmebildsystem für Extrusionsprozesse mit einer Düse basiert auf dem Infrarot-Zeilenscanner Raytek MP150. Erfassung aussagekräftiger Wärmebilder basierend auf 40.000 Messpunkten pro Sekunde Automatische Temperaturüberwachung Automatische Qualitätsüberwachung Bahntemperaturüberwachung Höherer Gewinn durch höhere Produktivität Weniger Ausschuss Schnelles Erkennen von „Kantenschlagen” und Löchern in der Schmelze Festlegung produktspezifischer Konfigurationen Automatische Analyse Visualisierung am PC Wiedergabe gespeicherter Wärmebilder als “Video” Mehrsprachige Software Integrierter OPC-Server für Fernsteuerung Ethernet-TCP/IP-Schnittstelle direkt am Zeilenscanner PC-unabhängiger Alarmausgang Analogausgänge 3 x 4 – 20mA Analoge/digitale Ausgabemodule Für Extrusionsprozesse mit mehreren Düsen, z. B. Folienextrusion, bietet Fluke Process Instruments das Wärmebildsystem Raytek ES150. Messtemperaturbereich:100 bis 350 °C Optische Auflösung:225:1 (50 % Energie) Genauigkeit:±3 °C Messpunkte pro Zeile:Bis zu 1024 Umgebungstemperatur:0 bis 50 °C mit Wasserkühlung 180 °C Reproduzierbarkeit:±1 °C Sichtfeld:90° Spannungsversorgung:24 VDC ± 25 %, 1 A Ethernet-Kommunikation:TCP/IP 10/100 Mbit/s Serielle Kommunikation:RS485 Analogausgänge:3 x 4 – 20 mA Alarmausgang:Relais, Kontakte: 30 V, 1 A

Wärmebildsystem zur Überwachung der Oberflächentemperatur von Drehrohröfen - Das System zur automatisierten Überwachung von Drehrohröfen erkennt Hot Spots, die auf fehlerhafte Ausmauerungen schließen lassen. Dadurch können Schäden am Drehrohrofen und kostenintensive Produktionsstopps vermieden werden. Ermittelt anormale Betriebsbedingungen Ermöglicht optimierte Wartung und längere Lebensdauer von Drehrohrofen und Ausmauerung Visualisierung am PC Ethernet-TCP/IP-Schnittstelle PC-unabhängiger Alarmausgang Analogausgänge 3 x 4 – 20mA 3D- und Refractory-Management-Software unterstützt bis zu 4 Linescanner Systemlösung mit OPC-Schnittstelle und leistungsstarker Datenbankfunktionalität Ofenbereiche, die die Linescanner nicht erfassen können, da sie zum Beispiel durch Laufringe verdeckt sind, können mit Punktpyrometern von Fluke Process Instruments überwacht werden. Die Temperaturdaten dieser Sensoren werden nahtlos in das Thermobild integriert. Zusätzlich lässt sich ein spezieller Sensor installieren, der die Brennzone im Drehrohrofen permanent überwacht. Messtemperaturbereich:100...650 °C (Brennzone 700...1800 °C) Temperaturauflösung:0,1 K Genauigkeit:±0,5 % vom Messwert oder ±3 °C Optische Auflösung (50%):450 : 1 (2,2 mrad) Messpunkte je Zeilenscanner:1024 pro Zeile ( 2048 für CS212) Umgebungstemperatur:-40...45 °C (kein direktes Sonnenlicht) Umgebungstemperatur - Positionsgeber:-25 ...230 ºC Alarmzonen:48 Software, 3 Hardware (PC unabhängig) Ofengeschwindigkeit:Bis 10 U/min Laufringmanagement (LRM):Unterstützt bis zu 6 Laufringe Lüftersteuerung:Bis zu 16 Lüfter pro Modul (48 insgesamt) Kommunikation:Ethernet TCP/IP Analogausgänge:3 x 4 – 20 mA Alarmausgang:Relais, Kontakte: 30 V, 1 A Spannungsversorgung:24 VDC ± 25 %, 1 A

Der Infrarot-Zeilenscanner Raytek MP150 ermöglicht die kontinuierliche Messung und Darstellung von Wärmebildern in bewegten Prozessen. — Echtzeitüberwachung von Bandprozessen und diskreten Prozessen — Bis zu 1024 Messpunkte pro Zeile — Abtastgeschwindigkeit von max. 150 Zeilen pro Sekunde — Optische Auflösung bis 200:1 — Eingebauter Linienlaser als Visierhilfe — Integrierte TCP/IP-Ethernet-Schnittstelle — Breite Modellpalette an Spektral- und Temperaturbereichen Die DataTemp DP Software erlaubt die Unterteilung der Wärmebilder in Sektoren oder Zonen. Zur Auswertung der Temperaturen in diesen Teilbereichen stehen umfangreiche Funktionen zur Verfügung (Max, Min, Mittelwert, ...). Bei Überschreitung der zulässigen Grenzwerte meldet die Software einen Alarm. Die Alarmbilder inklusive der zugehörigen Messdaten werden zwecks späterer Analyse automatisch gespeichert. Spektralbereich:1 µm...5 µm (modellabhängig) Messtemperaturbereich:20 °C...1200 °C (modellabhängig; Option bis 3000 °C auf Anfrage) Abtastgeschwindigkeit:Bis zu 150 Zeilen pro Sekunde Messpunkte pro Zeile:Bis 1024 Optische Auflösung:Bis 200:1 Schnittstellen:Ethernet TCP/IP (100 Mbit/s(, OPC, DDE, analoge/digitale Ausgabe, RS485 Schutzart:IP65 (NEMA4) Umgebungstemperatur:Bis 180 °C mit integrierter Wasserkühlung Abtastwinkel:90 °C Spannungsversorgung:24 VDC ± 25 %, 1 A

La série de systèmes à balayage ScanIR3 est une famille de scanners trés performants capables de fournir en temps réel des images thermiques précises dans un grand nombre d’applications industrielles que ce soit des procédés défilants ou discontinus. Intuitif et polyvalent, le logiciel ScanView Pro permet un paramétrage rapide et précis du capteur afin d‘obtenir une image ou un profil thermique de grande qualité sur un écran de PC. Caractéristiques: Fréquence de balayage jusqu‘à 150 lignes par seconde Jusqu‘à 1024 points de mesure par ligne Résolution optique jusqu‘à D.200 Entrées et sorties indépendantes d’un PC Communication Ethernet fiable (fibre optique en option) Boîtier solide et étanche avec laser de pointage intégré Moteur de balayage „Brushless“ : MTBF 40 000 h Fenêtre de visée interchangeable sur site Refroidissement et purge intégrés en standard Câble de liaison avec le scanner unique avec connecteur rapide Domaine spectral:1 µm...5 µm (selon modèle) Etendue de mesure:30 °C...1200 °C (selon modèle) (avec option à 3000°C sur demande) Vitesse de scrutation:Jusqu’à 150 lignes par seconde Points de mesure sur une même ligne:Jusqu’à 1024 Résolution optique:D/33 ...D/200 (selon modèle) Interface:Ethernet (fibre optique en option) TCP/IP 10/100 Mbit/s Protection environnementale:IP65 (IEC 60529) Température ambiante de fonctionnement:0 à 50 °C; avec refroidissement à eau intégré 180 °C; avec chauffage interne -40°C Champ de visée:90° Alimentation:100 à 240 Vca, 44 à 66 Hz Boîtiers de traitement:Analogiques, numériques, relais

• Images thermiques en temps réel – jusqu’à 300 balayages par seconde • Jusqu’à 1024 points de mesure par balayage • Large choix de réponses spectrales et de plages de température • Moteur sans balais de haute qualité (MTBF 40 000 h) • Communication Ethernet TCP/IP intégrée • Sortie alarme indépendante du PC • Interfaces 4-20 mA, indépendantes du PC (3 sorties) • Module d’entrée/sorties supportant jusqu’à 10 secteurs/zones (indépendant du PC) • Visée laser intégrée pour alignement précis • Boîtier industriel IP65 pour environnements difficiles • Soufflage d’air intégré pour protection de la fenêtre • Système de refroidissement intégré par eau (Tamb. jusqu’à 180°C) Industrie des métaux:Fonderie; Usine d’agglomération; Coulée continue; Laminage à chaud; Files et barres Matériaux de construction:Cimenterie – Contrôle continu des fours rotatifs; Plaques de plâtre (Placoplâtre); Asphalte Industrie du papier:Papeterie–Pâte à papier; Production de carton; Séchage du papier; Revêtement et pelliculage par extr Industrie des plastiques:Extrusion–Soufflage de films; - de feuille de plastique; Stratific. et embossage de films(feuilles) Industrie du verre:Verre plat–Verre flotté; Trempe de verre plat;Verre Automobile–Formage et feuilletage des parebrises

IR-linescanner-based thermal imaging system for extrusion / lamination processes - Thermal imaging system based on the Raytek MP150 infrared linescanner. Detailed web temperature profile based on 40,000 measurement points per second Automated temperature monitoring Automated quality monitoring for ISO9000 Ensures proper web temperatures for strong film-to-substrate adhesion Enables plant operators to reduce scrap and improve profitability and product quality Quick and automatic detection of “wavy” or “running” edges, gaps, and torn edges Define product-specific configurations (recipes) Automatically analyze “automatic sector” temperature distributions Visualisation on PC Playback stored files as “movie” Multiple language support Integrated OPC server for remote system control Ethernet TCP/IP interface integrated in the line scanning system PC-independent alarm output Analog outputs 3 x 4 – 20mA Analog or digital output modules For sheet extrusion see the Raytek ES150 system. Measured temperature range:100 to 350°C (212 to 662°F) System accuracy:±3°C (6°F) Repeatability ±1°C (2°F):±1°C (2°F) Optical resolution:225 :1 (50% energy) Ambient temperature:0 to 50°C (32 to 122°F); with water cooling 180°C (356°F) Field of view:90° Points per line:Up to 1024 Power supply:24 VDC ± 25 %, 1 A Ethernet communication:TCP/IP Protokoll 10/100 Mbit/s Serial communication:RS485 Analog outputs:3 x 4 – 20 mA Alarm output:Relay, contacts: 30 V, 1 A

Infrared line scanners for real-time thermal imaging in moving lines etc. - The IRCON ScanIR3 infrared linescanner provides real-time, thermal imaging of continuous sheet and web-based processes as well as discrete manufacturing processes. The robust housing includes built-in provisions for water-cooling and air-purge, and features built-in laser sighting. A rugged processor box provides universal input and output capabilities in the field without the need for an external computer. The versatile ScanView Pro software allows for custom configuration of operating parameters and display of thermal images and temperature profiles on a standard PC. Features: Fast scan speed up to 150 lines per second Up to 1024 measurement points per line High optical resolution up to 200:1 (allows for installation further from the measured process with excellent precision) Reliable Ethernet communication (optional fiber optics) Brushless scanning motor Field-replaceable window One bundled sensing head cable with one-click connector to the scanner Spectral range:1 µm...5 µm (dependent on model) Measured temperature range:30°C ... 1200°C (dependent on model) Optical scan rate:Up to 150Hz (256 points per line) Measurement points per line:Up to 1024 Optical resolution:Up to 200:1 Interfaces:Ethernet (optional fiber optics) TCP/IP 10/100 Mbit/s Environmental rating:IP65 (IEC 60529) Ambient operation temperature:0–50°C / 32–122°F; with integr. water-cooling up to 180°C/356°F; w. integr. heater min. -40°C/-40°F Field of view:90° Power supply:100 – 240VAC, 44/66Hz Serial communication:RS485 Processor boxes:analog, digital, relay

Thermal imaging system for metals/paper/plastics/glass production web processes - Thermal imaging system based on the Raytek MP150 infrared linescanner Automatic temperature and quality monitoring in continuous web processes Detect thermal problems early Faster product changes and reduced setup time Communicate with process control system via OPC Reduce scrap APPLICATIONS Plastics, metals, paper, and building industries, combustion prevention, hotspot detection, flat and float glass production, automotive, food processing and numerous other industrial applications FEATURES Onboard Ethernet TCP/IP communication Product specific configurations or “recipes” Custom measurement sectors Optional analog and digital outputs for each sector Analog outputs 3 x 4 – 20mA PC-independent alarm output Visualisation on PC Software supports English, German, French, Finnish, Dutch and Italian languages Optical resolution:Up to 200:1 (90% energy) Measured temperature range:20 – 1,200 °C Field of vision:90° Measurement points per line:Up to 1024 Line frequency:Up to 150 Hz Ambient temperature:0 – 50°C (with water cooling up to 180°C) Interfaces:Ethernet TCP/IP (100 Mbit/s), OPC, DDE, analog/digital output, RS485

ThermoView TV40 is a high-performance industrial thermal imaging system for fixed installation designed for factory automation applications. It integrates a visible-light camera and software for temperature control, monitoring, and data archiving. • Wide temperature range: -10 to 1200 °C (14 to 2192 °F) • Rugged aluminum housing, IP67 (NEMA 4) • Ambient temperatures to 200 °C (392 °F) with high-temperature enclosure • Air purge and accessories available • IR-Fusion technology: simultaneous thermal and visible sighting • Remote motorized focus • 320 x 240 and 640 x 480 focal plane array • 9 or 60 Hz models available • GigE Vision interface • LAN/Ethernet with PoE for communication with the camera provides access to Ethernet, Web server and ThermoView Software • Multiple field interchangeable lens options • 2-year warranty Measured temperature range:-10 to 1200 °C (14 to 2192 °F) Ambient temperatures:up to 200 °C (392 °F) with cooling enclosure Environmental protection:IP67 (NEMA 4) Spectral range:8-14 μm Accuracy:± 2 °C or ± 2% (reading) Frame rate:9 or 60 frames/sec Power supply:DC 12 to 26V, Power over Ethernet (PoE) Resolution:320 x 240px or 640 x 480px Field of view:Horizontal 34° x 25.5° Add-on lens options:0.75 wide lens , 2x lens, 4x lens, macro lens LED display:Power supply indication, system error codes Power Consumption:8 W (typical) 13 W (maximum) Accessories:Pan and Tilt

• Real-time thermal imaging, scan speed up to 300 Hz • Up to 1024 measurement points per line • Wide choice of spectral and temperature ranges • High-quality brushless motor (MTBF 40,000 h) • Built-in Ethernet TCP/IP communications • PC independent alarm output • PC independent 4-20 mA interfaces (3 outputs) • I/O module support for up to 10 sectors/zones (PC independent) • Internal Line Laser for accurate alignment • Rugged, waterproof IP65 enclosure • Air purge keeps window free of dirt and condensation • Built-in water cooling for ambient up to 180 °C (356 °F) Plastic Processing:Blown Film Extrusion; Cast Film Extrusion; Plastic Sheet Extrusion; Extrusion Coating; Thermoforming Metals Processing:Foundry Processing; Sinter Plant; Continuous Casting; Hot Rolling Mills; Rod and Wire Mills Construction Materials:Cement Processing; Gypsum Wallboard Production; Asphalt Production Glass Production:Float Glass Process; Flat Glass Tempering; Automotive Glass - Windshield Forming and Laminating Paper Processing:Paper Pulp Processing; Cardboard Production; Paper Drying; Extrusion Coating and Laminating

The ThermoView TV30 thermal imaging camera provides a rich feature set of automation and control capabilities along with the expected durability to meet the demanding industrial applications that FPI product need to survive in. TV30 can interface directly to factory automation equipment, 3rd party software such as Labview, or Fluke Process Instruments ThermoView software. By incorporating a built-in I/O for automation applications in a small foot print, you can expand your field of view by providing continuous infrared images, recording, and actionable analytics right at your fingertips. To meet the factory automation needs of today, TV30 cameras utilize edge technology to provide analytics calculations and on board I/O, multiple fieldbus protocol capabilities to interface to a variety of factory automation equipment, along with high-speed GigE vision capability for the most demanding applications.

— Minimisez les interventions des opérateurs grâce à une solution intégrée et entièrement automatisée — Collectez des données depuis des zones inaccessibles ou dangereuses pour préserver la sécurité de vos équipes — Surveillez les évolutions des signatures sonores en temps réel pour éviter les interventions de maintenance correctives Visualisez ce qui est inaudible et invisible grâce aux performances de l’imagerie acoustique. L’imageur acoustique fixe SV600 permet aux utilisateurs de détecter, localiser et visualiser en continu les fuites d’air et de gaz ou les évolutions des signatures sonores avant qu’elles ne deviennent des problèmes coûteux.

La caméra d’imagerie thermique ThermoView TV30 offre une gamme de fonctions étendue pour l’automatisation et le contrôle qui, alliés à la résistance renommée, permettent de satisfaire aux applications industrielles exigeantes auxquels les produits Fluke Process Instruments doivent survivre. La TV30 peut communiquer directement avec les équipements d’automatisation industriels, ainsi que les logiciels de tiers tels que Labview, et naturellement aussi avec le logiciel ThermoView de Fluke Process Instruments. In intégrant des E/S embarquées destinées aux applications d’automatisation dans un dispositif compact, vous pouvez étendre votre champ de vision et produire en un tour de main et en continu des images infrarouge, des enregistrements et des analyses activables.

Versandverpackungen einmal anders - mit Wooow-Effekt! Faszinierende Optik und tolle Haptik, die beeindrucken.

Versandverpackungen einmal anders - mit Wooow-Effekt! Faszinierende Optik und tolle Haptik, die beeindrucken.

By using an array of sophisticated sound sensors, the SV600 can be mounted close to any equipment or asset, to any area of the production line, or where human access is restricted or dangerous to ensure you can monitor the most important parts of your facility without interruption. As a fixed, automated solution, the SV600 integrates with your process and eliminates the need for lengthy fault-finding processes such as soapy water tests, when used as part of your product leak testing process. By continuously monitoring your environment, you can quickly detect and fix air leaks – reducing your consumption of compressed air and energy to help save your facility money. Key Features: High-end 24/7 acoustic monitoring 64-Digital MEMS microphones placed in a Sunflower Array Integrated visual light camera Powerful processor for onboard real time processing Sound classification Frequency filtering dB values and sound intensity mapping Event triggering Dimensions (L x W x D):170 x 170 x 65 mm (6.69 x 6.69 x 2.56 inch) Weight:0.85 kg (1.7 lbs) Integrated Visible Light:Included with fixed lens Resolution Video:640 x 480 Camera Field of View:65° ±3° Camera Resolution:720 p at 30 fps Type:MEMS, Digital Bottom Port SNR (A-weighted, at 1 kHz):64 dB for 94 dB SPL @ 1kHz Sensitivity:-26 dB FS +/-1.5 dB at 1 kHz, 94 dB SPL Acoustic Overload Point:120 dB SPL at 1 kHz, <10 % THD Ingress Protection:IP54 Operating Temperatures:-20 °C to 50 °C (4 °F to 122 °F) Audio:.wav (audio verification)

The TF Thermoforming Thermal Imaging System from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for thermoforming processes. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized applications and industrial environments. The TF Thermal Imaging System is ideal for applications reaching temperatures from 20 to 350°C (68 to 662°F). MP Linescanner With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field-of-view and up to 200:1 optics, each spot on the target surface is capable Temperature Range:20 to 350°C (68 to 662°F) System Accuracy:±2°C (4°F) Repeatability:±1°C (2°F) Optical Resolution:170:1 (90% energy) Field of View:90° Points per Line:up to 1024 pixels Scan Rate:up to 300 Hz

The TIP900 system is a comprehensive thermal imaging and noncontact profiling system designed to supervise the temperature of wallboards coming out of the oven. It uses an infrared thermal imager to continuously scan the entire board surface temperatures and allows the detection in real time of moisture and density variations inside each board. The powerful TIP900 software provides sophisticated data integration, visualization and event analysis, and offers users a complete solution of real-time monitoring, detection and traceability. It also analyzes and provides optimal oven dryer profile balance. The detailed wallboard quality maps, the historical temperature trend charts and the images can be seen locally at the operator workstation or remotely. All data is stored in the LogViewer database for complete process visibility and long term traceability. TIP900 System Software Detailed continuous board quality monitoring (100% of all board images are archived)

The ThermoView TV40 is a high-performance industrial fixed thermal imaging system that allows you to expand your understanding by providing continuous infrared and visual feeds to visualize temperature data. The TV40 offers a fully integrated temperature control, monitoring, and data archiving solution. With the ability to personalize your integration, the TV40 allows you to automate your process by programing unlimited "areas of interest," programable alarms, utilize advanced pass/fail logic, and perform safety or asset inspections. Feed the data to your PLC or view feeds remotely. Hardware The rugged TV40 thermal camera lets you visualize the temperature data you need anywhere in your process with reliable, high-quality 320x240 and 640x480 infrared resolution options. Several key features: IP67 (NEMA 4) housing that guarantees long-term thermal imaging in the harshest environments (air purge and other accessories available) Simultaneous infrared and visible sighting Measurement Accuracy:±2°C or ±2°% (reading) Models:9 or 60 Hz Field of View:Horizontal 34º x 25.5º Spectral range:8 - 14 μm Detector:Uncooled focal plane array Operating Temperature:-10 to 50°C (14 to 122°F) Storage Temperature:-20 to 50°C (-4 to 122°F) Humidity:10 to 95% non-condensing Environmental Protection:IP67 (NEMA 4) Weight:Approximately 1.08kg (2.38lbs)

The Extrusion Coating EC Thermal Imaging System from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for moving processes and product. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized extrusion coating, co-extrusion and laminating processes.The series also features dedicated hardware and software options, which have been created specifically for specialized extrusion coating, co-extrusion and laminating processes. MP Linescanner With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field Temperature Range:100 to 350°C (212 to 662°F) System Accuracy:±3°C (6°F) Repeatability:±1°C (2°F) Optical Resolution:225:1 (50% energy) Field of View:90° Scan Rate:up to 300 Hz

Building on the versatile, high-performance ThermoView TV40 Thermal Imager, the Pan and Tilt is a new integrated system and housing accessory designed for remote temperature monitoring in substations and electric utility applications. No aspect of modern society can function without power, so keeping the power distribution grid up and running is essential in order to maintain our day-to-day lives. As renewable energy sources continue to make headlines, traditional power utility companies are facing increased pressure to provide low-cost energy. This, paired with aging infrastructure, is putting additional stress on power generation facilities—which, if critical equipment fails, can ultimately disrupt power supplied to the grid. Now more than ever, power facilities must implement solid temperature monitoring solutions to that can help to identify possible equipment failures, perform preventative Wide temperature range:-10 to 1200°C (14 to 2192°F)

The GS Thermal Imaging System for Glass Processes from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for moving processes and low emissivity glass products. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized glass applications – such as glass bending, forming, annealing and tempering – and industrial environments. MP Linescanner With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field-of-view and up to 200:1 optics, each spot on the target surface is capable Temperature Range:100 to 950°C (212 to 1742°F) System Accuracy:±0.5°C or ±3°C (6°F) Repeatability:±1°C (2°F) Optical Resolution:170:1 (90% energy) Field of View:90° Points per Line:up to 1024 pixels Scan Rate:up to 300 Hz

Versandverpackungen einmal anders - mit Wooow-Effekt! Faszinierende Optik und tolle Haptik, die beeindrucken.

Verringern Sie die Suchzeit im Ihrem Lager durch Regalschilder mit echten Produktbildern. Die selbstklebenden oder magnetischen Schilder für Regale und Boxen sind frei individuell gestaltbar, z. B. mit unterschiedlichen Barcodes, Nummerierung, Größe etc.