Produse pentru fara (4)

The pressure transducers of the 8L series have a compact, robust housing made of stainless steel, giving them excellent long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet. Pressure Ranges:0…0,2 to 0…200 bar Accuracy:±0,5 %FS Long Term Stability:±0,2 %FS Dimensions:⌀ 17 mm x 7 mm Temperature Range:-40…125 °C

These low-cost miniature pressure transducers have been specially developed for very rapid hydrodynamic and aerodynamic in situ pressure measurements. The 2Mi sensors are available in a variety of housing designs and can simply be stuck on at the desired location. Despite its miniature design, the sensor chip is protected against external influences by a steel housing and a silicone elastomer coating. It can also be used in liquids. Pressure Ranges:0…1 to 0…400 bar Accuracy:±0,5 %FS Pressure Connection:Elastomer coating Dimensions:⌀ 4,5 mm x 3 mm Temperature Range:-20…80 °C

These catheters are suitable for research and laboratory applications. Different sizes (4F to 8F) and modular design allow any sequence of sensor chips. Pressure Ranges:-0,5…0,5 bar Accuracy:±0,5 %FS Pressure Connection:4F / 5F / 6F / 8F Dimensions:⌀ 1,33…2,67 mm Temperature Range:20…40 °C

The miniature pressure transducer M5 takes its name from the fine M5 thread at the sensor head that makes it possible to take measurements in places which are difficult to access and in narrow pipelines. Together with its ability to measure media at temperatures of up to 180 °C in a dynamic range from 0 to 50 kHz, this makes it ideally suited to measurements on engine test benches. Pressure Ranges:0…3 to 0…30 bar Accuracy:±0,3 %FS Pressure Connection:M5 x 0.5 thread Dimensions:⌀ 6,2 mm x 40 mm Temperature Range:-50…180 °C