Produse pentru aplicatie (1097)

Gradi disponibili AISI 304/316/431 Fino a 2000 ore di resistenza alla corrosione NSS ISO 9227 Rating 9 ISO 10.289 Riporto di cromo standard ≥ 20µm Acciai disponibili:AISI 304/316/431

Choosing a breathable, durable polyurethane-coated base ticking for your support surface is just as important as choosing a stretchy, pressure redistributing top cover. Trellelborg Engineered Coated Fabrics’ range of base ticking materials work in harmony with our top covers to provide the ultimate support surface. HIGH SLIP Low friction coating designed for ease of support surface movement. Use for: • Fall prevention • Easy transfer Designed to work with standard hospital beds to allow ease of movement between support surface and bed frame when the bed is articulating. Easy to slide mattress on and off bed frame. Manufactured in the UK and USA, Trelleborg Engineered Coated Fabrics are: •PVC Free/Latex Free/Phthalate Free/Halogen Free FR •REACH & RoHS compliant •BS EN ISO 9001:2015 (FM 14842) certified •BS EN ISO 14001:2015 (SE006995) certified

The trak | uplift iQ battery is equipped with the trak | collect battery controller, which measures the battery status in real time to increase productivity and operational safety. The current status of the battery is always indicated by an LED display near the battery socket. trak | uplift iQ is Fleet Ready: The battery system communicates with the environment (e.g. charger, PC and vehicle) and transmits battery data for battery and fleet management. In addition, the Smart Charging function ensures high energy efficiency, minimized water and energy consumption. Trak | uplift iQ is the optimal system to reduce your operating costs and CO2 footprint.

Intense Pulsed Light Systems use not only use filters, that are used to filter out the UV wavelength range; and transmit between 400-1200nm for use within cosmetic lasers that are designed to remove unwanted hair, vascular treatment and even acne treatment. But they also use Homogenizing Rods to help evenly distribute light. The Light source will enter a light pipe at a variety of incident angles, which is designed to utilise its total internal reflection to channel the light from the entrance of the light pipe to the exit. The material’s refractive index is the only factor which affects the light pipes critical angle; this defines the angle of acceptance which the total internal reflection will occur at. All our Homogenizing Rods are fully inspected on their quality in our ISO 9001 certified, state-of-the-art Metrology laboratory, using our Trioptic’s PrismMaster, and Starrett AV300 Video Imaging System.. FOR MORE INFORMATION READ PDF..

Der elektronische Druckschalter DS 200 ist die gelungene Kombination aus — intelligentem Druckschalter — digitalem Anzeigegerät und ist für vielzählige Anwendungen in unterschiedlichen Industriebereichen konzipiert. Standardmäßig verfügt der DS 200 über einen PNP-Schaltausgang und ein drehbares Anzeigemodul mit 4-stelligem LED-Display. Optionale Eigenschaften wie z.B. eine eigensichere Ex-Ausführung, max. 4 Schaltpunkte sowie ein Analogausgang runden das Profil ab. Merkmale: — Nenndrücke: 0 ... 100 mbar bis 0 ... 600 bar — Genauigkeit:0,35 % (Opt. 0,25 %) FSO — Messwertanzeige auf 4-stelligem LED-Display — Anzeigemodul dreh-und konfigurierbar — 1, 2 oder 4 unabhängige PNP-Ausgänge, frei konfigurierbar — einstellbare Schaltpunkte (Ein- / Ausschaltpunkt, Hysterese / Fenstermodus, Ein- / Ausschaltverzögerung) Optionale Merkmale: — Ex-Ausführung Ex ia = eigensicher für Gase — verschweißter Druckanschluss — kundenspezifische Ausführungen

BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors detect when a filling level is exceeded or falls below a limit. Water-based liquids like coolants, AdBlue®, fresh water, waste water and oil-based liquids like motor oils, hydraulic oils, fuels and brake fluids can be monitored. Operating Principle The function of the sensor is based on the capacitive principle. It detects the change in capacitance that occurs when an electrode surrounded by air is immersed into a liquid medium. This change in capacitance at the electrode of the sensor excites an oscillator. This signal is processed by a microcontroller-based evaluation circuit which activates or deactivates an output stage. Types of Media The level monitoring sensors are designed for two different media types: For electrically conductive liquid media with relative permittivity within a range of εr 35 … 85 (water, coolant, water/glycol mixture) For electrically non-conductive liquid media

Neben dem Standardprogramm an Hochdruck-Plungerpumpen bieten wir auch eine große Auswahl von Edelstahlpumpen in unterschiedlichen Werkstoffen an, ebenso wird dem Bedarf für besondere Anwendungen Rechnung getragen. Eine Ausstattung mit Sonderdichtungen wie z.B. Viton, Teflon und FFKM o.ä. ist auf Kundenwunsch in der Regel möglich.

For listed buildings, there are regular new construction tasks. Often there are no adequate plans on the basis of which planning, modernization or renovation can be carried out. Due to the very high scan rate of more than 1 million measured values per second, range resolution in the millimeter range and a measuring accuracy in the mm range, even the capture of the finest structures and details is still possible with the 3D laser scanners from Zoller + Fröhlich. The 3D documentation is therefore the ideal prerequisite for reconstructions of, for example, design conditions or sensitive stucco work. The recorded inventories, damage, structures and details are recorded in databases and allow a faithful reconstruction of the entire object or of parts of the object at any later time.

Los tornillos para bridas de ESINSA son componentes esenciales para asegurar uniones seguras y duraderas en aplicaciones industriales. Fabricados con materiales de alta calidad, estos tornillos ofrecen una resistencia excepcional a la corrosión y al desgaste, garantizando un rendimiento confiable incluso en las condiciones más exigentes. Son ideales para industrias que requieren un alto nivel de seguridad y durabilidad en sus sistemas de unión. Con una amplia gama de tamaños y configuraciones disponibles, los tornillos para bridas de ESINSA se adaptan a cualquier necesidad específica. Además, ofrecemos un servicio de asesoramiento técnico para ayudarle a seleccionar los componentes adecuados para su aplicación. Al elegir ESINSA, puede estar seguro de que está optando por productos que cumplen con los más altos estándares de calidad y rendimiento, asegurando la integridad de sus sistemas.

The spring is a crucial spring component for agricultural machinery, providing essential tension and support. Priced at just 0.70 € + VAT, this spring is an affordable solution for maintaining your equipment. Its robust design ensures reliability and longevity, making it a smart investment for both professional and hobbyist users. By choosing the spring, you can ensure that your machinery operates smoothly and efficiently, allowing you to focus on your agricultural tasks without interruptions.

Macchina Industriale 3 in 1 per Taglio, Saldatura e Pulizia La macchina industriale 3 in 1 per taglio, saldatura e pulizia è un’attrezzatura versatile progettata per ottimizzare i processi di lavorazione nei settori della carpenteria e della lavorazione dei metalli. Questa soluzione integrata consente di eseguire tre operazioni fondamentali in un unico dispositivo, riducendo i tempi di ciclo e aumentando l'efficienza produttiva. Caratteristiche Principali: Funzioni Multiple: Combinando le operazioni di taglio, saldatura e pulizia, questa macchina elimina la necessità di attrezzature separate, ottimizzando lo spazio in officina e riducendo i costi di investimento. Taglio Preciso: Dotata di un sistema di taglio avanzato, la macchina è in grado di eseguire tagli netti e precisi su una vasta gamma di materiali come acciaio, alluminio ecc, garantendo risultati di alta qualità. Saldatura Efficiente: La sezione di saldatura utilizza tecnologie moderne, come la saldatura a MIG/MAG o TIG, per unire i materiali in modo rapido e robusto, producendo giunzioni resistenti e di alta qualità. Pulizia Integrata: Il sistema di pulizia è progettato per rimuovere scorie e residui dai pezzi lavorati, migliorando l'aspetto estetico e preparando le superfici per ulteriori trattamenti o finiture. Facilità d'Uso: L'interfaccia intuitiva e i controlli ergonomici consentono un’operazione semplice e rapida, riducendo i tempi di apprendimento per gli operatori e aumentando la produttività. Sicurezza e Affidabilità: La macchina è equipaggiata con sistemi di sicurezza avanzati per proteggere gli operatori e garantire un ambiente di lavoro sicuro, prevenendo incidenti durante le operazioni. Applicazioni: Questa macchina 3 in 1 è ideale per l'uso in diversi settori, tra cui: Carpenteria Metallica: Per la lavorazione di strutture metalliche. Industria Automotive: Nella produzione e riparazione di componenti automobilistici. Costruzione di Attrezzature: Per la realizzazione di macchinari e attrezzature industriali. Lavorazione di Metalli: Per applicazioni in fabbriche e officine meccaniche. In sintesi, la macchina industriale 3 in 1 per taglio, saldatura e pulizia rappresenta una soluzione completa per le aziende che desiderano migliorare l’efficienza operativa, ottimizzare gli spazi di lavoro e ridurre i costi associati all'acquisto di più attrezzature.

Syntech Pavicrom PU Two-component aliphatic polyurethane coating, resistant to UV rays, coloured, in a vehicle solvent, for the glossy finish of concrete, fiberglass and steel surfaces. Excellent mechanical and abrasion resistance Wide range of colors available Uniform gloss finish Low maintenance over time Excellent resistance to UV rays and yellowing Resistant to atmospheric agents Possible non-slip finish Wide range of transparent finishes available Excellent resistance in aggressive atmospheres. Smooth or non-slip finish and coating, resistant to UV rays, water-repellent, with excellent abrasion resistance, for concrete and cementitious supports subject to mechanical stress; smooth finish for fiberglass surfaces, polyurethane insulation and waterproofing systems; colored coating of multilayer systems; colored coating for industrial floors of car parks, ramps, warehouses, etc. o concrete infrastructures such as bridges, viaducts, silos, tanks, pylons, etc.; smooth or non-slip finish and coating, on ceramic, clinker and porcelain stoneware surfaces; Also suitable for steel supports, after appropriate preparation and priming of the support. Concrete The surfaces to be coated must be stable, clean and free of substances that could affect the adhesion of the coating, such as dirt, grease, oil, residues of coatings and surface treatments, etc. The weak parts must be removed before applying the product by mechanical sanding with diamond discs and vacuum cleaning. The tensile strength of the concrete must not be less than 1.5 N/mm². Wet supports In case of residual humidity, apply two or more coats (depending on the irregularities of the support) of Syntech Pavidamp three-component epoxy primer. All cracks in the substrate must be treated and sealed before applying the three-component primer. Resin coatings The surfaces to be covered must be stable, clean and free of substances such as dirt, grease, oil, etc. which can affect the adhesion of the coating. Smooth the surface by mechanical sanding with diamond discs and vacuum. It is recommended to wash the surfaces and let them dry completely before applying the finish. Steel It is necessary to remove solder residues and grind the joints. Sandblasting at Sa 2½ according to ISO8501-1. The surfaces to be coated must be free of dirt, oil, grease and impurities. Average degree of surface roughness RZ ≥ 50 μm. An anti-corrosion treatment is recommended before applying the coating. Ceramic coverings, glass mosaic, porcelain stoneware, clinker Wash the ceramic surfaces to be treated with specific detergents to remove smog, dust, salts, etc. which block the pores to facilitate better capillary penetration of the primer onto the support. Humidity control Before installing resin systems and coatings, always check the residual humidity content. Check for the presence of residual humidity with the plastic sheet method according to the ASTM D 4263 standard: fix a thick polyethylene sheet with a minimum size of 45x45 cm to the support with adhesive tape. 24 hours after installation, lift the sheet and check the presence of traces of humidity. When tested with a carbide hygrometer, the moisture content of the substrate should be < 4% by weight. Primers Concrete The application of SYNTECH PAVICROM PU must always be preceded by the application of a coat of epoxy anchoring primer SYNTECH PRIMER EP-S. Wait 8-12 hours before applying the finish. Resin coatings The application of SYNTECH PAVICROM PU must always be preceded by sanding the entire surface in order to promote and guarantee optimal adhesion of the product to the support. Ceramic surfaces, glass mosaic, porcelain stoneware, clinker The application of SYNTECH PAVICROM PU must always be preceded by the application of a coat of specific primer SYNTECH PRIMER. Wait at least 6-8 hours before applying the finish. Combine the two components in the indicated mixing ratio. Add component B (hardener) to component A (base) and mix well until a completely homogeneous product is obtained. It is advisable to start mixing briefly with an electric drill at low speed and then intensify the stirring up to a maximum of 300-400 rpm. The product can be applied uniformly using a spray gun or short-haired roller to avoid accumulations of material which could give rise to aesthetic defects. The application of the product must be carried out by crossing the passes and paying particular attention to the shots, regularly unloading the roller beyond the applied area to obtain a uniform film and eliminate any accumulations of product. Apply one or more coats of Syntech Pavicrom PU respecting the consumption and thickness indicated. Wait approximately 12 hours, then apply the second coat of colored finish. Approximately 0.15 - 0.20 kg of Syntech Pavicrom PU for each square meter of surface to be coated in two coats. Kit: 1 Can 6.7 kg [A] + 1 Can 3.3 kg [B] - Kit: 1 Can 3.3 kg [A] + 1 Can 1.7 kg [B] - Kit: 1 Can 13.4 kg [A] + 1 Can 6.6 kg [B]

Die MX Prototyping GmbH bietet hochwertige Laserkantteile, die sich durch Präzision und Flexibilität auszeichnen und für zahlreiche industrielle Anwendungen geeignet sind. Unsere Laserkantteile werden mit modernster Lasertechnologie gefertigt, die es ermöglicht, selbst die komplexesten Geometrien mit höchster Präzision zu schneiden. Die Verwendung von CO2-Lasern mit einer Strahlleistung von 4 Kilowatt gewährleistet eine schnelle und präzise Bearbeitung. Diese Laserkantteile sind ideal für Anwendungen in der Automobilindustrie, im Maschinenbau und in der Medizintechnik. Die Möglichkeit, in einem 2-Stationen-Modus zu arbeiten, reduziert die Rüstzeiten und erhöht die Effizienz der Produktion. Vorteile: Präzise Formgebung und exakte Maßhaltigkeit Flexible Fertigung in Prototypen und Serie Hohe Materialvielfalt und Geometrien Moderne Lasertechnologie für präzise Kantung Strenge Qualitätskontrolle für langlebige Ergebnisse

Axon' expertise in PTFE insulated wires and cables has enabled the company to offer different PTFE based products : tubes, rods, profiles, films, glass cloth impregnated with PTFE, desiccant bags, Celloflon® tapes, etc... They all take advantage of the mechanical, chemical, thermal and electrical characteristics of the PTFE (polytetrafluorethylen). Celloflon is an expanded PTFE material patented by AXON'CABLE Advantages Good temperature resistance (-200°C to +260°C) Low dielectric constant Non adhesive properties Non flammability Chemical resistance, … Biocompatibility Construction Tubes can be used as cable insulation, cannulae, tubes for liquids or hot gases (e.g assemblies for ink jet printing). Various versions : from ultra thin tubes to tubes with specific diameters Various colours : natural, black, yellow, red, orange, bicolour, spiral, … Tubes for micro-catheters with walls as thin as 10 µm PTFE multilumen tubing

Der IST AG P14 2FW Thermo wurde speziell für Taupunktapplikationen und Feuchtegeneratoren entwickelt. Die vorteilhafte One-Chip-Lösung besteht aus einem kapazitiven Feuchtesensor, basierend auf einem Standard P14 Sensor, und einem Heizer, welcher gleichzeitig als Pt100 Sensor funktioniert. Dank der optimalen thermischen Kopplung und der dadurch schnellen Erholungszeit, erzielt der Sensor eine hervorragende Messgenauigkeit. Durch die Heizfunktion des Pt100 wird die Feuchtigkeit schnell wieder abgegeben und ermöglicht somit schnelle Folgemessungen nach der Kondensation. Zusätzlich werden durch die Wärme Gase und Dämpfe aus dem Polymer getrieben, welche ansonsten Drift im Feuchtesignal verursachen könnten. Der Sensor hat einen Messbereich von 0 % RH bis 100 % RH (maximaler Taupunkt +85 °C) mit einer Kapazität von 150 pF ±50 pF (bei 30 % RH und +23 °C) und wird im Temperaturbereich von -50 °C bis +150 °C eingesetzt.

Format (in cm): Der Afrikanische Rote Marmor ist in verschiedenen Standardformaten erhältlich, darunter 60x30 cm, 60x60 cm, 120x60 cm sowie in großformatigen Platten von bis zu 200x100 cm. Sondergrößen sind ebenfalls auf Anfrage verfügbar. Menge (m²): Die verfügbare Menge richtet sich nach dem Projektbedarf. Kleinere Projekte können ab 50 m² beliefert werden, größere Projekte können mehr als 1000 m² umfassen. Teile: Platten (Slabs): Diese werden oft für Arbeitsplatten, Fassadenverkleidungen und luxuriöse Oberflächen im Innenbereich verwendet. Fliesen (Tiles): Die Fliesenformate eignen sich hervorragend für Bodenbeläge und Wandverkleidungen in Wohn- und Geschäftsräumen. Individuelle Zuschnitte: Auf Anfrage werden auch maßgeschneiderte Zuschnitte für spezielle Designanforderungen wie Treppen, Fensterbänke und andere architektonische Details angeboten.

Las distintas aplicaciones requieren diseños diferentes para un ajuste óptimo, por lo que proporcionamos intercambiadores de calor de carcasa y tubos con un diseño de tubo único con tubos aletados lisos altos y bajos, así como con haces tubulares de aletas compactos. El diseño de tubo liso es más adecuado si los medios tienen unas propiedades de transferencia de calor similares, mientras que el diseño aletado y compacto ofrece el mejor rendimiento posible si existe una diferencia sustancial en el grado de transferencia de calor, por ejemplo, en el intercambio de calor entre agua y aceite. La solución de tubo único aletado alto y bajo se encuentra entre los dos diseños anteriores para mejorar aún más el flujo, la caída de presión y las velocidades de los medios.

Notre Expertise en Filtration pour le Secteur de la Finition des Plastiques Depuis sa création en 1992, Technicis Filtration s’est imposée comme un leader dans la fabrication de filtres pour cabines de finition. Avec plus de 30 ans d’expérience, notre société a développé une expertise approfondie dans la filtration de l’air, en particulier dans le secteur de la finition et de la métallisation des plastiques. Que ce soit pour les ateliers de peinture, de métallisation ou de finition des plastiques, nous avons développé des solutions adaptées à chaque process. Les environnements de production nécessitent des systèmes de filtration efficaces pour garantir une qualité optimale de la finition, maintenir des conditions de travail propres et sûres, et optimiser les opérations de maintenance. La métallisation des plastiques peut se faire par voie galvanique (galvanoplastie) ou voie liquide.

URM bietet eine Reihe von hochwertigen Silikonschläuchen (gerade Form/Bogen/Faltenbalg) für Marineanwendungen. Alle Größen sind als gerade Form, gerade Reduzierstücke, 90°Bogen, 45°Bogen, 135°Bogen und 180° erhältlich. Gerne entwickeln wir auch individuelle Formen nach Ihren Anforderungen bzw. Ihrem Entwurf. Unten finden Sie die Druckstufen für den Shore Master

We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

Glass is a fragile material, and standard float glass has a low tolerance to impacts. By increasing the thickness of the glass, the impact tolerance increases, but this does not eliminate the risks associated with glass breakage. Laminated glass is a safety and protective glass. It is produced by combining two or more glass panels with an interlayer of polyvinyl butyral (PVB) under heat and pressure. If the glass breaks, most of the fragments remain adhered to the interlayer, thereby reducing the risk of injury caused by glass shards. Laminated glass "Şişecam" is the laminated glass brand of "Şişecam Flat Glass". The ultra-clear laminated glass "Şişecam" is the low-iron laminated glass brand, produced with low-iron float glass. The transparency of the ultra-clear laminated glass "Şişecam" is significantly higher, minimizing the distortion of the original colors of objects.

Améliorez vos produits grâce à RoFoam ! Notre mousse XPE haute performance est le matériau semi-fini idéal pour un large panel d’applications. RoFoam vous permet de créer de multiples solutions dans différents secteurs. Notre mousse de polyéthylène expansé à cellules fermées présente des propriétés exceptionnelles : - Absorption des chocs supérieure - Isolation thermique - Atténuation acoustique - Légèreté et souplesse - Résistance à l’eau - Durabilité RoFoam est disponible en différentes épaisseurs, densités et configurations. Contactez-nous dès à présent pour analyser vos souhaits et découvrez comment RoFoam peut améliorer vos produits et vos projets. R&D Notre équipe de recherche et développement est prête à collaborer avec vous ! N’hésitez pas à nous soumettre les défis uniques relatifs à l’application que vous rencontrez. Nous collaborerons étroitement avec vous pour concevoir une solution sur mesure à base de mousse XPE pour répondre à vos besoins spécifiques.

RAFIX Befehlsgeräte sind ideal für den Einsatz in den Branchen Elektrotechnik, Maschinen-, Anlagen- und Fahrzeugbau. Denn sie sind robust, unempfindlich gegenüber Umwelteinflüssen und bieten große Betätigungs- und Anzeigeflächen, so dass sie auch mit Handschuhen problemlos bedient werden können.

NUTRIEL incluye varias formulaciones de fertilizantes NPK para aplicación foliar y elaboradas con materias primas de alta calidad para tener una solubilidad total y baja salinidad. Las combinaciones de los elementos contenidos se han estudiado para proporcionar una nutrición equilibrada a los cultivos en diferentes fases fenológicas. Además de nitrógeno, fósforo y potasio, las formulaciones de NUTRIEL están enriquecidas con los microelementos esenciales (cobre, zinc, manganeso, hierro, boro, molibdeno) necesarios para prevenir y curar cualquier deficiencia de microelementos. Aspecto:Microcristales Aplicación:Foliar embalaje:1 Kg - 5 Kg - 25 Kg

The SEC 6100 is part of the Solar Technology by Atlas market approach offering integrated, ready-to-use test chambers for various solar and environmental applications. The SEC 6100 combines environmental simulation with metal halide lighting technology. It's a full function climatic chamber with additional simulation of the global sunlight spectra. Exposure volumes of 14m 3 are offered within the largest standard double door walk-in solar environmental chambers for e.g. multiple full PV modules testing. Test chamber capacity approx. 14,200L Radiation area approx. 48,000cm 2 Lamp: 6x MHG 4,000W Luminary Intensity: 800W ~ 1200W /m 2 (Adjustable) Wavelength: 280 ~ 3,000nm (Full Spectrum) -30℃ ~ +100 °C (W/O Radiation) -20℃ ~ +100 °C(W/ Radiation) 30% ~ 95%RH (W/O Radiation) 20% ~ 80%RH (W/ Radiation) 12.1" color touch screen Graphic User interface Intuitive control features and easy-to-use programming logic 6 Channel DAQ integrated for temperature sensors Multi-source temperature control pre-implemented and selectable in user interface Pre-wired for BST (Black Standard Temperature) sensor and control Pre-wired for plug-and-play radiometer for irradiance measurement Galvanized steel with powder coated exterior Engineered diffusive reflective stainless steel inner testing chamber for optimum spatial uniformity Easy access swing doors to luminary systems Robust refrigeration system for precision control of environmental parameters Multi-stage safety features Option Atlas25+ Core Cycles Indoor Filter Pyranometer CMP6 Class 1 - General Purpose Black Standard Temperature (BST) Controlling the Black Standard Temperature (BST)

These are machines used in construction for the mixing of aggregates, cement, and water to concrete consistency effectively. Cone concrete mixers have a design that ensures a complete turnover of materials to avoid a bad mix of the products. Essentially, these mixers would be very useful on all building sites, in concrete plants, and for industrial purposes since they are effective in producing the desired characteristics of concrete. Overall, cone mixers ease the process of making concrete mixtures and are hence indispensable in the construction field. Their performance is good, they have ease of operations, and they give uniform mixtures, therefore workable tools for professionals in the construction sector. 1. Cone-Shaped Mixing Drum The cone mixer basically consists of a mixing drum, which is cone-shaped in form. It is designed to ensure that aggregate and cement are mixed with water in the correct proportions to produce a homogeneous concrete mixture.

Compact constant voltage supply 24V for operation of LED modules, not dimmable, for indoor applications Article No.:OTNA4372 Code:DRIVER 30W DC 24V Product EAN:4003556012189 Box quantitiy (pcs.):16 EAN Box:4003556412187 Gross weight of box in kg:3.273 Length of box in m:0.261 Product weight:164 g

Ces nuances d'acier à grain fin et à haute résistance se caractérisent par leur bonne soudabilité et leur grande résistance à la fissuration fragile. Ils offrent d'excellentes propriétés de formage à froid et sont souvent utilisés pour des applications spéciales à basses températures (-20 ° C et moins).

Temperature control of liquids Tube coil heat exchangers (so-called tube cooling coil heat exchangers) are generally used to control the temperature of liquids. This system can also be used to heat or cool liquids in a controlled manner. Due to their special shape, pipe coil heat exchangers are sometimes also called hairpin heat exchangers. Inexpensive applications The simple and solid structure enables it to be used in cost-effective applications. Coiled tube evaporator systems are ideally suited for brine and glycol applications. Classic variant Coiled tube evaporator systems are a classic and proven variant in the field of heat exchanger systems. Coiled tube heat exchangers are often used in ice storage systems or in the production of cold water units. In ice storage systems, coils can be used to achieve an even build-up of ice around the coils. Materials:1.4301 (ANSI 304) 1.4404 (ANSI 316 L) 1.4571 (ANSI 316 Ti) Standard pipe:d = 21.3 x 1.5 mm, Pa from 1 - 50 bar surface:pickled, passivated (optionally e-polished) Manufacturing / acceptance:Pressure Equipment Directive 97/23 / EC

Valvola a sfera a passaggio totale, filettatura M/F, con leva in acciaio.