Produse pentru aplicatie (1612)

Unisan A composite mortar that is fibre-reinforced, consolidating, dehumidifying, grey in colour and utilised for the structural restoration of crumbling old or monumental masonry. It contains no substances that are potentially harmful to masonry and is composed of NHL 3.5 natural hydraulic lime and hydraulic binders free from soluble salts, along with silicas with pozzolanic activity, selected siliceous-calcareous aggregates, specific shrinkage-reducing agents and resistant alkaline READYMESH fibres that confer high flex-traction whilst increasing the performance of the mortar’s fracture energy. In conjunction with ARMAGLASS STRUCTURA fibreglass mesh, it is ideal for the structural restoration of old walls or crumbling constructions. Construction of plasters and reinforced slabs in interventions of restoration, construction of plaster and dehumidifying coatings with high performance, bedding of bricks and modular elements. The surfaces should be clean and free of any soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition of "saturated dry surface". In the case of structural reinforcing slabs, you will need to proceed with applying an appropriate reinforcing electrowelded mesh, to be fixed with PROFIX, Grout Micro-J, Repar Tix G2 or Syntech IC 55. Pour about 2/3 of the mixing water into the mixer, add Unisan and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 12-14% of the weight of the bag. After mixing is completed wait a few minutes before applying. Apply the product by plastering trowel and brick trowel, or preferably with plastering machine (type PFT model G4). Do not apply in case of direct exposure to sunlight or excessive ventilation. Cure the protection and the prolonged moist hardening, of exposed surfaces. Approximately 15 kg/m² of Unisan for every centimetre of thickness to be implemented (approximately 1500 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Knight Optical offer a range of Stock N-BK7 Dome Windows, for use with Underwater Lighting. A dome is an optical window composed of two parallel curved surfaces. Domes are commonly used in defence applications and often in extreme environments such as Submersible ROV’s. The shape of the window creates a naturally strong shape that gets tougher under pressure. Using a curved dome optical surface allows for an increased beam angle, therefore allowing a greater area to be lit from one light source. For visible applications, N-BK7 with its high optical quality and uniform transmission and low absorption in the visible spectrum makes it an ideal material for underwater lighting. A tough and cost effective solution which allows for good transmission of the light source in the underwater environment will both protect the light source as well as transmitting from 300nm up to 2µm. For more information read PDF Material::N-BK7 or Equivalent Diameter Tolerance::±0.1 Thickness Tolerance::±0.1 (±0.2 for >100mm diameter) Surface Quality::<60/40 Scratch/Dig Chamfer::0.2x45° typical Centricity::<0.1mm

I nostri scambiatori di calore saldobrasati offrono soluzioni su misura per la più ampia gamma di applicazioni possibili. Grazie alla produzione automatizzata e al design compatto della nostra serie brasate, possiamo montare uno scambiatore di calore personalizzato nel più breve tempo possibile. Scegliamo tra scambiatori di calore a piastre saldobrasati in rame e nichel o VacInox a seconda del campo di applicazione. Cerchiamo la soluzione più economica tra le varie dimensioni e i diversi accessori a nostra disposizione, adattandola esattamente alle vostre esigenze con connessioni personalizzate.

Der elektronische Druckschalter DS 400 ist eine gelungene Kombination aus — intelligentem Druckschalter — digitalem Anzeigegerät und ist für vielzählige Applikationen in unterschiedlichen Industriebereichen konzipiert. Standardmäßig verfügt der DS 400 über einen PNP-Schaltausgang und ein Anzeigemodul, das drehbar im Kugelgehäuse montiert ist. Zusätzliche optionale Ausführungen wie z.B. eine eigensichere Ex-Ausführung, ein zweiter Schaltausgang sowie ein Analogausgang runden das Profil ab. Merkmale: — Nenndrücke: 0 ... 100 mbar bis 0 ... 600 bar — Genauigkeit: 0,35 % (Opt. 0,25 %) FSO — Messwertanzeige auf 4-stelligem LED-Display — Anzeigemodul dreh-und konfigurierbar Optionale Merkmale: — Ex-Ausführung Ex ia = eigensicher für Gase — Drucksensor verschweißt — kundenspezifische Ausführungen

Codifica, marcatura, trattamento preliminare in ambienti industriali . Teste di stampa senza compromessi. È già pronta la prossima generazione. Maggiore velocità, minore usura. Un lavoro di testa, che ripaga i nostri clienti Due particolari esigenze dei nostri clienti ci hanno spinto a migliorare ulteriormente le nostre leggendarie e robuste teste di stampa macrocarattere REA JET: — Raddoppio del potenziale di velocità precedente fino a 600 m/min — Aumentarne la durata grazie a una minore usura 7 ugelli = 5-27 mm 16 ugelli = 5-67 mm 32 ugelli = 5-140 mm 7 ugelli:5-27 mm 16 ugelli:5-67 mm 32 ugelli:5-140 mm

The GESIPA® TRI-FOLD® blind rivet forms three press lashes on the closing head side during setting. The advantages The large moulded lashes distribute the exerted clamping force evenly and gently onto the riveted material. Also, the large surface of the lashes offer excellent protection against the rivet being pulled through very soft, porous or brittle application parts. Thanks to its special design, the TRI-FOLD® is also able to compensate over-dimensional or irregular drill hole diameters. Application areas TRI-FOLD® blind rivets are excellently suited for the automotive field, e.g. for plastic panelling, car body parts and for the interior work inside vehicles, but also for all other applications that are particularly soft, brittle, easily deformed or porous. Material:alu/alu

CALCAST® CC 500 ist ein keramischer Dämmstoff aus Calciumsilicat mit einem Raumgewicht von 1.200 kg/m³. Die Anwendungsgrenztemperatur beträgt 1.200 °C. Diese liegt damit um 200 °C höher als bei den anderen CALCAST® - Werkstoffen. CALCAST® CC 500 zeichnet sich darüber hinaus durch eine hohe Temperaturwechselbeständigkeit aus. Diese wird hervorgerufen durch die geringe Schwindung des Werkstoffes bei hohen Temperaturen. Der Werkstoff wird von flüssigem Aluminium nicht benetzt. Ideal ist der Einsatz als Abdeckung von Rinnen beim Vorheizen und beim Transport von Metall. Weitere Anwendungsgebiete sind z. B. die Isolation von Ofendeckeln, Wänden von Durchlauföfen usw. Bearbeitung CALCAST® CC 500 lässt sich präzise in engen Toleranzen bearbeiten. Mit unseren 5-Achs Bearbeitungsmaschinen können wir komplizierteste Geometrien fertigen.

Oil-, water-, dirt- and stainproof impregnation for high-quality concrete products, frequently used for surface- treated (shotblast, bush-hammered, brushed) concrete products. Water-based, fast-drying, strong and long lasting water beading and oil beading effect and easy-to-clean effect.

Neben dem Standardprogramm an Hochdruck-Plungerpumpen bieten wir auch eine große Auswahl von Edelstahlpumpen in unterschiedlichen Werkstoffen an, ebenso wird dem Bedarf für besondere Anwendungen Rechnung getragen. Eine Ausstattung mit Sonderdichtungen wie z.B. Viton, Teflon und FFKM o.ä. ist auf Kundenwunsch in der Regel möglich.

MATERIALS 90% cotton 10% recicled polyester 100% cotton FABRICS (100% MADE IN PORTUGAL) Micropolar / Gauze / Double gauze Jersey / Fleece CERTIFICATIONS Oeko-Tex 100 Class I FINISHED Embroidery Digital print Conventional print Yarn dyed Garment dyed Other washings and dyes MEASURES:100 X 100 cm / 80 X 80 cm

Inkrementaler Messtaster mit magnetischem Funktionsprinzip. Extrem unempfindlich gegenüber Verschmutzungen wie Ölnebel, Feuchtigkeit und Staub. Perfekt geeignet zur automatisierten Messwerterfassung in Messvorrichtungen, Montage und Fertigungsanlagen. Messbereich:12mm Genauigkeit:6µm (p-p) / 10µm(p-p) Auflösung:1µm / 5 µm Max. Ansprechgeschindigkeit :100m/min Referenzmarke:keine Messbolzenbetätigung:Feder / Pneumatisch mit Adapter DZ176 (optional) Ausgangsignal:TTL-Linedriver (RS422) mit Interpolator MT14 (optional)) Kompatible Messwertanzeige :LT10 / LT11 Serie

BOIS : Vernis / Laques sur Mobilier / Menuiserie / Ebénisterie / Agencement / Lutherie / Instruments de musique

Unsere Seefracht-Versanddienste sorgen für einen effizienten Transport Ihrer Waren zu entfernten Küsten mit reibungsloser und pünktlicher Lieferung über weite Ozeane.

Zahn schwamm applikator

Borne EPOQ

RK Rose+Krieger, Mutlilift II safty kaldırma sütununu medya teknolojilerindeki yüksek uygulamalar için özel olarak geliştirmiştir. Bu uygulamalarda projektörlerin ve monitörlerin doğru yerde konumlandırılması gibi görevlerde kullanılmaktadır. Kaldırma sütunu bu uygulamalarda yüksekte tavana monte edilmektedir. Yüksekteki bu uygulamaların altından genellikle insanlar geçmektedir. Kaldırma sütununun kontrolsüz bir şekilde açılması veya inmesi nedeniyle insanlara ve eşyalara yönelik bir tehlike oluşmaması için RK Rose+Krieger Multilift II safety için dahili bir güvenlik sistemi geliştirdi. Bu sistem temel olarak özel bir plastik amortisör bulunan mekanik bir son dayanak noktasından meydana gelmektedir. Bu güvenlik özelliği, tahrikin arızalanması halinde kaldırma sütununun iç profilinin kontrolsüz bir şekilde dış sütundan kayarak dışarı çıkmasını önlemektedir. Bu yeni kaldırma sütunu modeli sayesinde düşmeyi önleyecek maliyetli, harici bir yapı kurulmasına gerek kalmamaktadır.

The Weber PickRobot stands for the uncompromising automation of slicing applications. Specifically adapted to your application area, it can be used flexibly for all insertion tasks and is available in five different executions: SmartPicker, single, double, triple or quad PickRobot. As powerful and highly efficient automation components with up to 230 picks per minute, the robots integrate perfectly into your line and ensure maximum performance. In combination with the Weber VMAX thermoforming technology, loading portions into an advancing index is possible, which maximizes performance even better than ever before. Advantages Flexible, reduced labor costs, and easy-to-clean Multi-variety and multi-layer packs available for compact spaces (overlapping, 90° rotation, variable portion shapes) Complete filling of the package when portions overlap Virtually eliminates human contact Improves food safety Handles all popular portion shapes and sizes Portion turning or correction:any angle Maximum load capacity incl. gripper:3 kg Infeed output (picks/min):65 Height (mm):2970 Width (mm):3017 Power supply (V/Hz/A):euronorm-plug CEE, 32 A, 16 A, 200 V– 600 V three-phase current, 50/60 Hz (country departed) Power rating (kW):4 kW Compressed air port:coupling plug AG 1/4 NW 7 Air pressure (bar):min. 6 Compressed air consumption (l/min):standard 140

The top labeling machine is the self adhesive labeling machine for pasting labels on top of the products, such as boxes, pouch, caps,lipsticks, or any flat surface of the products. This type of labeler is flexiable, and can bu customized fixing on the exited production line, and easy to move to other place. if change the labeling head direction, then it can be a side labeling machine.With touch screen control panel,make it easier and quicker to adjust various parameter,improve the labeling accuracy and working efficiengy. Label detection electric eye, product detection electric eye and optical fiber amplified adopts famous brands such as Germany SICK, Japan PANASONIC, Germany LEUZE (For transparent sticker) etc Labeling Speed:60-200pcs/min(Depending on label length and bottle thickness) Height of Object:30-350mm Thickness of Object:20-120mm Height of Label:15-140mm Length of Label:25-300mm Label Roller Inside Diameter:76mm Label Roller Outside Diameter:320mm Accuracy of Labeling:±1mm Power supply:220V 50/60HZ 0.75KW Single-phase Gas Consumption of Printer:5Kg/cm^2 Size of Labeling Machine:1000(L)×650(W)×1500(H)mm Weight of Labeling Machine:120Kg

Taśmy Flat-Flex® już od 85 lat cieszą się zaufaniem w branży przemysłowej. Dzięki otwartej powierzchni wynoszącej do 86 %, taśmy Flat-Flex® zapewniają maksymalną przepustowość i stanowią sprawdzonym rozwiązanie dla dużych przetwórców. Dzięki zatwierdzonej przez amerykański departament rolnictwa (USDA) konstrukcji oraz zdolności do zachowania czystości w miejscu zamontowania, jeszcze bardziej ułatwiają spełnienie wymogów higienicznych linii produkcyjnej, a dzięki możliwości wyboru spośród szerokiej gamy średnic drutu i podziałek, użytkownik jest w stanie dobrać odpowiednią taśmę do swojego produktu. Średnica drutu (mm):0,9 - 4 Zakres podziałki (mm):4 - 25 Średnia masa (kg/m2):1 - 5,5 Maks. naciąg taśmy na odcinek (N):13,4 - 390 Typowe przestrzenie otwarte (%):67 - 85 Szerokość taśmy (mm):28 - 4500

CNC wood milling machine WATTSAN A1 6090. Ideal for rapidly starting production. Despite the fact that the model belongs to the CNC wood router machine for beginners, complex products are made with this machine. WHY YOU SHOULD BUY THIS CNC WOOD ROUTER MACHINE 1) Solid cast iron frame ensures reliable and high processing accuracy. 2) It is possible to complete the machine with a 4th rotary axis. 3) Attractive to entrepreneurs starting their business as it is easy to use and quickly pays off.

Variaciones sobre un paralelepípedo. Las rejillas, bordes simples o triples decoran las opciones, estos modelos se pueden colocar horizontal o verticalmente, especialmente en los baños.

Lichte lagedrukslangen op maat voor de spoorwegsector. Alle afmetingen zijn verkrijgbaar in volgende uitvoeringen recht, recht met reduceerstuk, 90°elleboog, 45°elleboog, 135°elleboog en 180°. We staan u graag bij met het ontwikkelen van vormen op maat volgens uw vereisten/ontwerp. Hieronder vindt u de nominale drukken voor de Shore Master. Slangen gebruikt voor airconditioning, verwarming, ventilatie, radiateurkoelvloeistof, remkoeling, dakdrainage en motortoepassingen

Axinar has designed and produces, solar panel stands and mounts for various applications. The photovoltaic support system, is an innovative system exclusively developed by Axinar. This system is based on high-quality galvanized steel components. The base is designed with both the longevity of the construction and the ease of installation in mind. This system supports 3 rows of panels per table. As a result, the installation of the panels is easier, always maintaining the limits set by regulations for the overall height of the structure. The structural elements are designed to be adaptable to different soil conditions and flexible in the construction space. Upon request, the base can be adjusted to any desired angle.

Soluciones de software adaptadas a las necesidades individuales de las tiendas minoristas y grandes superficies de distribución: programación de las balanzas, gestión comercial, control de almacenes, albaranes y facturación, y diseño gráfico de etiquetas y tickets.

aluPLUS è un contenitore moderno in alluminio pressofuso per applicazioni elettriche ed elettroniche in ambito industriale. È disponibile nelle dimensioni industriali standard per il montaggio di morsetti, circuiti stampati o piastre di montaggio. Gli ambiti di applicazione sono numerosi. aluPLUS è adatto sia al libero montaggio a parete sia all'ambito dell'elettronica industriale e della struttura delle macchine. Sul coperchio è già presente un alveolo per alloggiare tastiere a membrana oppure piastre frontali. Le fascette estetiche consentono di nascondere le viti del fissaggio a parete o al coperchio e garantiscono un look accattivante del contenitore. Il contenitore deve essere montato chiuso. Le filettature di montaggio integrate M5 nella parte inferiore e sul coperchio offrono possibilità di montaggio ottimali per diversi componenti interni. Sono sempre disponibili inoltre numerosi accessori nonché avvitamenti per cavi compatibili. EN AC-44300 DIN EN 1706:Alluminio

Material :Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Processing:turning, milling, drilling, wire EDM, welding Tolerance:+-0.05mm, as required Suface treatment: anodizing, electroplating

Girls' patterned tights made of microfiber with sewn-in dancer applications and sequins. Sewn gusset, 40 den.

Surveying of insurance damage - Applications

5-axis/5-sided machining means the C 42 lends itself to be used in every application area. With traverse paths adapted to the workpiece size and perfectly designed for 5-axis applications, the C 42 is ideal wherever complex, close-tolerance components are required. This includes various applications in the tool and mould making, medical, aerospace, motorsport, machine sectors and other industries: The C 42 machining centre is at home in every area. The space-saving circular tool magazine integrated into the base body of the machine works according to the pick-up principle - thus enabling quick tool changes. In the standard version, the C 42 can hold 42 tools and can be extended to 192 pockets. The control panel can be easily adjusted to the respective user. Milling and turning in one clamping with the C 42 U MT dynamic model. Fully integrated rotary table that does not interfere with demanding milling processes and 5 axes simultaneously. Traverse X-axis:800 mm Traverse Y-axis:800 mm Traverse Z-axis:550 mm Rapid linear traverse (dynamic) X-Y-Z:45-45-40 m/min (60-60-60 m/min) Linear acceleration (dynamic) X-Y-Z:6 (10) m/s² Linear feed force X-Y-Z:8500 N Max. vertical table clearance:700 mm Max. workpiece diameter:Ø 800 mm Max. workpiece height:560 mm Collision circle (A axis) in 0° position:Ø 990 mm

Paper; C1S, C2S, Kraft, Special, Duplex Printing; CMYK, Pantone, UV, Silk Screen Lamination; Matte, Gloss, Varnish, Dispersion Application; Hot Foil, Deboss, Emboss, Grain, Spot UV