Produse pentru zinc pentru răceli (22)

Anwendungsbeispiele: thixotrop, selbstfließend, Hochofen: Rinnen (thixotrop) auf Basis AL2O3-SiC, Stahlwerk: Pfannen, Eisengießereien: Pfannen KEROXYD-Anwendungsgebiete Stahlindustrie Hochofen Stahlwerk Eisengießerei Kupolofen Pfannen Stahlgießerei Induktionsofen NE-Gießereien Schmelzöfen Warmhalteöfen

Optigrun Drainage Material Perl 2-10 BS is used as a drainage layer beneath extensive and intensive green roofs without water accumulation, for pressure resistant filling of Drainage Boards and as pressure resistant drainage and equalization layer beneath pathways. Material:Expanded shale Grading:2 - 10 mm Frost resistant:DIN 4226 Salt content:< 0,5 g/l Max. water capacity:11 - 19 Vol% Water permeability:> 420 mm/min Weight dry:560 kg/m³ Weight when saturated:670 kg/m³

Fluid Col Multi-purpose additive powder, to add to a suitable mixture of binders and aggregates, for the on-site production of mortars, grouts and concretes that are self-levelling, rheoplastic, controlled shrinkage or moderately expansionary, high mechanical strength, chemical and waterproofing. The physical-chemical action of Fluid Col is an interaction of positive contributions and modifications: drastic reduction of the A/C ratio, shrinkage-resistant action, superpozzolanic action and reaction of ultrafine fillers (MICROSIL 90), which transforms unstable, soluble, readily reactive calcium hydroxides into stable, insoluble, chemically and mechanically resistant hydrous calcium silicates. Preparation of mortars, grouts, rheofluid concretes, shrinkage-compensated or moderately expansionary, high mechanical, watertightness and chemical stability performance, for structural slubs, anchoring machines, road joints, etc. Add the product in a concrete mixer, mixer truck or mixer, together with the remaining anhydrous components of the mixture: cement and aggregates, any polypropylene and/or steel fibres, etc. The indicative dosage, depending on the type of conglomerate to be packaged and its purposes, varies between 12% and 15% of the weight of the cement. After a first mixing, add the mix water and mix thoroughly, until you obtain a homogeneous whole and free of lumps. The cement dosage must not be less than 350 kg/m³. Fluid Col is perfectly compatible with the addition of fibre d steel and/or polypropylene fibres READYMESH, for the preparation of conglomerates composite s, fibre reinforced. Add 10 - 15% of Fluid Col to the weight of the cement present in the mixture. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Tungrit, ein Wolfram Granulat, ist im Plansee Online Shop verfügbar. Für chemische Analysen oder als Ausgleichmasse ist das Tungrit Granulat genau die richtige Wahl. Einfach und schnell im Onlineshop des Herstellers bestellen: www.plansee.com/shop

Summenformel:LiCoO2 CAS:12190-79-3 Molekulargewicht: 97,87 Eigenschaften: Dunkelblaues Pulver, wasserunlöslich. Verwendung: Wird als Rohstoff für Lithium-Sekundärbatterien verwendet. Lithiumkobaltoxid ist ein besseres Kathodenmaterial in Lithium-Ionen-Batterien. Es bietet die Vorteile einer hohen Betriebsspannung, einer stabilen Entladung, einer hohen spezifischen Energie und einer guten Zyklenleistung, ist jedoch teuer ist hoch (Kobalt wird verwendet), schlechte Sicherheit, durchschnittliche Zyklenlebensdauer und schlechte Materialstabilität. Es wird hauptsächlich als Kathodenmaterial bei der Herstellung von Lithium-Ionen-Batterien für Mobiltelefone, Notebooks und andere tragbare elektronische Geräte verwendet. Derzeit hat die Spannung von Lithiumkobaltoxid 4,35–4,45 V erreicht.

Kalkstein besteht überwiegend aus Calciumcarbonat (oder Kalziumkarbonat). Bei Kalkstein handelt es sich um ein Sedimentgestein. Im Laufe der Jahrmillionen haben sich Ablagerungen aus den Urmeeren verfestigt. Zu diesen Ablagerungen gehörten u. a. Muschelschalen und Korallen, die zum grössten Teil aus Calciumcarbonat bestehen. Die stabilste Form (Modifikation) des Calciumcarbonats ist der Calcit. Viel seltener kommt Aragonit in Gesteinen vor. (Die anderen Formen wie Vaterit und amorphes Calciumcarbonat spielen für die Bildung von Kalkstein keine Rolle.) Fast immer enthält Kalkstein einen gewissen Anteil an Verunreinigungen, z. B. Ton oder Sandstein. Bei einem Gehalt von mehr als 95% Calciumcarbonat spricht man von hochprozentigem Kalkstein, den man zu Weisskalk brennen kann. In Netstal werden besonders reine Kalksteine mit einem Gehalt von bis zu 98 % Calciumcarbonat abgebaut. Die wichtigste Eigenschaft von Calciumcarbonat ist seine Zersetzung in Calciumoxid (CaO, gebrannter Kalk,...

Product Description   Commodity : Dysprosium Ferrum Alloy (DyFe Alloy) Dy 80%(-/+0.1%) RE Purity(TREM):99.9% Min.

El PCC se diferencia del GCC (Carbonato cálcico natural) por poder: -Disponer de partículas de menor tamaño y más uniformes. -Presentar distribuciones granulométricas más estrechas y estables. -Ejercer menor abrasión -Presentar superficies específicas superiores. -Asegurar purezas químicas más elevadas. Le PCC se différencie du GCC (Carbonates de Calcium Naturels) en ce qu’il permet de : -Disposer de particules plus petites et plus uniformes. -Présenter des distributions granulométriques plus étroites et plus stables. -Exercer moins d’abrasion. -Présenter des surfaces spécifiques supérieures. -Assurer des puretés chimiques plus élevées. The PCC can be distinguished from the GCC (Ground Calcium Carbonates) for: -The possibility to achieve smaller and more uniform particle sizes -More stable and narrower granulometric distribution -Lower abrasivity -Higher specific surface -Highest chemical purity.

Sodium Sulfide exists in flakes or liquid form and has either a yellow or red color. It is an inorganic compound. It has a typical mercaptan or rotten egg odor. It is completely soluble in water. It also reacts violently with strong acids. It reacts with oxidizing agents. It is insoluble in ether and slightly soluble in alcohol. During exposure to moist air, Sodium Sulfide and its hydrates will yield hydrogen sulfide. It is also known as „stinky alkali,“ and the liquid form is strongly alkaline. The chemical formula of Sodium Sulfide is Na2S. Boiling Point:122.78 - 131.67°C Melting Point:950 °C Viscosity:unavailable Purity:60% pH:11.5-12.5

Metallurgical silicon carbide with SiC 88%, 94% min mass proportions, in the form of 0-10mm grain size fraction for use as a modifier (deoxidizer) in the process of synthetic iron melting in cupola furnaces, electric arc or induction furnacer.

Esta granalha é proveniente do corte de arame de inox AISI304. Dependendo das características da matéria-prima usada, são obtidas diferentes durezas, sendo possível o fornecimento de diferentes esfericidades (G1, G2 e G3). > Aplicação industrial de abrasivos > Bem-Vindo à BLASQEM! O seu Especialista em Granalhas, Abrasivos e Equipamentos. Dureza:40 - 55 HRC Forma:cilíndrica ou esférica (G1,G2 ou G3) Densidade:7,8 g/cm3

Strahlmittel Nickelschlacke 0,8-3,0 mm zum Strahlen von Metalloberflächen vor dem Lackieren. Verpackung:Big Bag für 1 Tonne Herstellungsstandard:ISO 11126-3

Kaya tuzu insan sağlığı için en önemli bileşenleri bünyesinde toplayan doğal mineral kaynağıdır. Vücudumuzda bulunan 92 mineralden 84 tanesi bu tuzun içeriğinde yer alır. Büyükbaş sığır ve küçükbaş koyun keçilerin önünde sürekli bulunması gereken doğal tuzdur. Hayvanlar için kaya tuzu, hayvanların vücutlarında bulunan sodyum, klorür, potasyum ve magnezyum gibi minerallerin dengeye getirilmesine yardımcı olmak için kullanılan bir tuz türüdür

We are manufacturer and seller of NATURAL ZEOLITE (Clinoptilolite) Packing : in 25 Kg PP Bags on Pallets or 1 ton Big Bag Sizes : < 100 micron , 0-1 mm, 0,7-1,2 mm and other size : on request. Delivery Capacity : 6000 tons per Month Country of origin : Turkey Application : AGRICULTURE, GULF COURCE , WATER TREATMENT FILTER, OIL DRILLING

Dear sir. We are manifacturing Plactic pellet in Turkey, since 1991 We produce Hdpp an PP pellet 400.000 Mt per month best quality If you get interested, we would like to contact you again See more detail : http://www.ozkiliclar.com.tr

Reading Alloys hat sich auf Vorlegierungen, Titanpulver und gasverdüste Pulver spezialisiert.

Griechischer Weihrauch, Duftnote Byzantinum Kirchenbedarf / Weihrauch und Rauchfasskohlen Griechischer Weihrauch, Duftnote Byzantinum, 50 g Einheit: Stück Preis: 3.00 Euro verschiedene Gewichtseinheiten: 50g, 100g, 250g, 500g, 1000g

Pour l’agglomération du minerai de fer, ces castines sont constituées de calcaire à plus de 97% de carbonate de calcium. Elles servent également de composant dans les engrais. Contactez-nous pour des informations complémentaires

Optigrun Drainage Material Perl 2-10 LA is used as a drainage layer beneath intensive green roofs without water accumulation, for pressure resistant filling of Drainage Boards and as pressure resistant drainage and equalization layer beneath paving. Material:Lava Grading:2 - 10 mm Salt content:< 1.0 g/l Max. water capacity:14 - 18 Vol% Water permeability:180 - 450 mm/min Weight dry:min. 1,000 kg/m³ Weight when saturated:max. 1,300 kg/m³

Monocalcium phosphate occurs as a white or slightly dull powder or granules. It does not have a distinct smell. It is soluble in water and does not ignite when exposed to flames. Calcium (Ca):13% Min Fluorine (F):0.18% max Arsenic (As):0.002% Max Plumbum (Pb):0.002% Max Moisture:4.00% Max

Given that Ferric alum is powder that does not burn when it is exposed to fire, it is commonly used in firefighting foams. When applied at the base of fire, it forms a blanket that prevents the combusting materials from accessing oxygen that is required for them to keep burning. Some water treatment firms use the salt for treatment of water. During the treatment of water, the electrons in the water hydrolyze fast forming combinations with various metal elements in water. They form slats that sediment at the base of the container and can be filtered away. Unlike many water purification agents, Ferric alum can work at very low temperature. This makes it ideal for water treatment during fall and winter seasons. The same compound works well in disinfecting and treatment of sewerage systems. It combines with organic matter and deals with the resulting odor. Aluminium oxide Al2O3 %:min 16.0 Iron Fe content%:max 0.5 Water insoluble matter 1%:max 0.15 AS %:max 0.0005 Grain size:15 mm max

Es un abrasivo elaborado con minerales naturales, resistente, reutilizable y sin hierro. Dureza: 7.5-8.5 mohs Forma: angular Densidad: 3,5-4,0 g / cm3