Produse pentru utilizat (1809)

Ziehmesser- und Oszilliermesser Typ Z104 mit flachem Schaft. Eigenschaften: Messer zum Schneiden dünner Materialien. Eignet sich für das Schneiden von kleinen Radien. Empfohlene Materialien: Wellpappe (bis 7 mm) Verwendung: PCT mit Messerhalter Typ 3 Hersteller Artikel-Nr.: 5221104 Artikel-Nr:20310673 Hersteller:Zünd Hersteller-Nr:5221104

Typ: Fräser R103 Egenschaften: Ø 3.0 mm, Schaft Ø 6.0 mm,1 Schneide Empfohlene Materialien: Acryl Aluminium Max. Tiefe: 11.0 mm Max. U/min.: 50.000 Hersteller Artikel-Nr.: 3910743 Artikel-Nr:20310490 Hersteller:Zünd Hersteller-Nr:3910743

Typ: Fräser R116 Egenschaften: Ø 6.0 mm, Schaft Ø 6.0 mm,1 Schneide, poliert und gewuchtet Empfohlene Materialien: Forex MDF Holz Dibond Max. Tiefe: 22.0 mm Max. U/min.: 50.000 Hersteller Artikel-Nr.: 3910759 Artikel-Nr:20310163 Hersteller:Zünd Hersteller-Nr:3910759

790C wet use chopped strand (WUCS), featuring Advantex® glass fibers, is specifically designed for higherfeed rate processes in dry feed applications. EXCELLENT FIRE/FLEXURAL STRENGTH Engineered to provide fire resistance performance and meet regional building codes. Improves flexural strength of wallboards for ease of handling and installation. High strength characteristics to enhance abuse resistant wallboard systems. EFFICIENT PROCESSING Designed to improve higherfeed rate processes where the uniform glass dosage rate and dispersion reduces feed flow variations and causes clumps. ENHANCED GLASS FIBER CHARACTERISTICS Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. Boronfree Advantex® glass contributes to decreased emissions, reduces the environmental impact of manufacturing fiberglass, and provides superior performance in corrosive environments compared to standard Eglass. PHYSICAL PROPERTY:Softening Point ADVANTEX(R) GLASS:916 °C TRADITIONAL E-GLASS:850 - 870 °C MOISTURE CONTENT:5.3 - 8.3% % STRAND SOLIDS LEVEL:.14 - .22% FIBER DIAMETER:14.4 - 17.6μ

OptiSpray® F Roving represents a compelling solution for fabricators that want to save time and resin while increasing the performance of their products. INCREASED EFFICIENCY Low fuzz combined with easy chopping, flat lay down and uniform dispersion saves time. REDUCED COST Higher glass loading with optimal resin consumption reduces the amount of expensive resin required. GREAT PERFORMANCE Good mechanical properties, great surface quality, excellent conformability, doesn't trap air, low spring back. FAST WETOUT Designed to provide optimal performance for sprayup applications where fast wetout speed is preferred; great performance in various types of part complexities. Owens Corning also offers Technical Support, which focuses on trouble shooting and increased productivity for our customers.

Schneidunterlage PLP soft Menge/Format: 6 Unterlagen à 940 mm x 1100 mm Stärke: ca. 2.5 mm Farbe: Schwarz Besondere Eigenschaften: Gute Planlage, höhere Luftdurchlässigkeit für besseres Vakuum Artikel-Nr:99310044.15 Hersteller:Diverse

M705 chopped strand mat represents a compelling solution to hand lay up high glass content and thin laminates balanced with good mechanical properties. EASY HANDLING & MOLDABILITY Optimized chop length mix provides good confirmability to complex contoured molds. PROCESS EFFICIENCY Fast wetting and quick air release help reduce the labor required to roll out the part. BALANCED PERFORMANCES Moderate impregnation speed reduces resin consumption, resulting in thinner laminate with high glass content, and improved mechanical properties. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. M705 mat is designed for use with unsaturated polyester, vinyl ester resin systems in hand layup applications including automotive parts, boats, chemical tanks and pools. NOMINAL MAT WEIGHT (G/CM2):225 - 300 - 375 - 450 - 600 ROLL WIDTH (CM):95 - 104 - 125 NOMINAL MAT WIDTH (CM):95 -104 -125 ROLL DIAMETER (CM):30 ROLLS PER PALLET:12 PALLET SIZE (CM):127 x 97

Typ: Fräser R505 für die Verwendung im ARC Schaftdurchmesser 6 mm, Fräsdurchmesser 5 mm, Frästiefe 16 mm, 1 Schneide Speziell für Zünd Cutter entwickelte Fräser. Geeignet für harte sowie weiche Materialien wie z. B. Acryl, Aluminium, Dibond, Forex, MDF, Pertinax und Kunststoffe wie PET, PP, PE, PVC-U, PS. Hersteller Artikel-Nr.: 5218139 Artikel-Nr:20310680 Hersteller:Zünd Hersteller-Nr:5218139

Introducing higher performance composites by Owens Corning more modulus, more benefits, more opportunities. This new higher performance glass provides a boost in mechanical properties enhancing part performance or cost optimization through redesign. Reduce the weight of pultruded parts by up to 8% by using higher modulus glass, saving material cost. Improve performance by up to 15% in axial tensile strength for helically wound pipe compared to reference products. The glass can be used in high temperature muffler applications due to an annealing point increase of 25 30°C compared to current products. Higher modulus can enable fiberglass rebar with modulus up to 70 GPa on straight bars. Properties previously unattainable on bent bars can now be achieved. Central strength members can be made 8% lighter, enabling increased fiber optic capacity in the cable. Reduce the weight of parts for automotive applications by up to 9%.

Typ: Fräser R34 Egenschaften: Ø 1.0 mm, Schaft Ø 3.0 mm,3 Schneiden Empfohlene Materialien: Harte Materialien, Hartmessing Max. Tiefe: 3.0 mm Max. U/min.: - Hersteller Artikel-Nr.: 3910424 Artikel-Nr:2310133 Hersteller:Zünd Hersteller-Nr:3910424

Unifilo® 500 Series continuous filament mats represent a large choice of tailored reinforcement solutions for efficient manufacture of high performance profiles by pultrusion process FREEDOM OF DESIGN AND WHITE COLOR U527 product easily adapts to complex die shapes and preserves part white color. U528X1 product offers a great balance between softness, white color and good tensile strength requirements. PRODUCTIVITY AND HIGH PERFORMANCE U528 product is easy to splice and enables excellent processability. It provides very good mechanical and dielectrical properties to molded parts U529 product higher tensile strength fits the requirement for most challenging profiles and fast pultrusion process speed. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. Unifilo®500 Series mats are available with varying binder contents to match up with specific customer applications NOMINAL MAT WEIGHT (G/CM2):225 - 300 - 450 - 600 - 900 ROLL WIDTH (CM):127 - 138

OC Paneluxe™ multiend roving represents a compelling solution for panels where excellent translucency performance is required. Produced with patented Advantex® corrosion resistant ECR glass by Owens Corning and compatible with unsaturated polyester resins. EXCELLENT PROCESSING Designed for excellent processing at various line speeds, OC Paneluxe™ roving features easy unwinding and chopping, flat laydown, and uniform dispersion with low fuzz and static. With high impregnation and wetthrough characteristics, the product allows excellent resin flow in translucent applications. IMPRESSIVE AESTHETICS Excellent fiber distribution provides a homogeneous surface aspect with limited fiber prints, resulting in consistent thickness throughout the laminate. Absence of white fibers and fiber springback along with significant reduction of air entrapment ensures excellent translucency of laminates. LINEAR WEIGHT OF ROVING (TEX):2400 YIELDS (YDS/LB):207 LOSS ON IGNITION (%) ISO 1887:1995:0.65

Owens Corning surfacing glass nonwovens key product benefits are high strength performance, hot tensile and thermal stability, helping improved dimensional stability. They help carpet tiles preventing from curling and shrinking. In cushion vinyl flooring, they help improve manufacturing line speed, and installation with less breakage.

Einfaches, robustes Oszilliermesser Verwendung: EOT, POT, 0.63 mm Empfohlene Materialien: Leder Gewebe; Textile Wellpappe Filz Gummi Sandwichplatte Max. Schnitttiefe: 8.7 mm Messermaterial: HM Messerdicke: 0.63 mm Vorschnitt: 1.2 + 0.51 x Tm Nachschnitt: ohne Hersteller Artikel-Nr.: 3910317 Artikel-Nr:20310020 Hersteller:Zünd Hersteller-Nr:3910317

ME1510 represents a compelling solution for structural applications requiring high mechanical properties. This multiend roving product increases physical properties – enabling vehicle light weighting, increased fuel efficiency and lower CO2 emissions. EXCELLENT PROCESSABILITY Due to excellent wettability in epoxy and phenolic matrices, very high glass content is achievable, enabling excellent processability while compounding. OUTSTANDING MECHANICAL PROPERTIES Superior strength and flexural modulus enable light weighting in vehicles to increase fuel efficiency, lower CO2 emissions and increase range in electric vehicles. ENHANCED SERVICE LIFE Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. FIRE RESISTANT Compatible with phenolic resins used in fire resistance applications such as electric vehicles. HEIGHT (MM):254 NOMINAL WEIGHT (KG):20.5 LINEAR WEIGHT OF ROVING:2400 and 4800 TEX 207 and 103 Yeild LOSS ON IGNITION (%) ISO 1887: 1995:0.7 MOISTURE CONTENT (%) ISO 3344: 1997:≤ 0.10

Schneidunterlage PLP Menge/Format: 6 Unterlagen à 940 mm x 1100 mm Farbe: Schwarz - Stärke: ca. 2.5 mm Farbe: Golf - Stärke: ca. 2.75 mm Artikel-Nr:50310074 Hersteller:Diverse Hersteller-Nr:3912164

Owens Corning® Milled Fibers are designed to enhance mechanical properties, increase stiffness, improve dimensional stability, and minimize distortion under elevated temperatures. EXCELLENT DISPERSION & IMPREGNATION Predispersed nature promotes excellent dispersion in the matrix. Shortfiber thermoplastic compounds will show improved melt flow characteristics with shorter input fiber lengths. IMPRESSIVE AESTHETICS Fiber length and excellent distribution qualities provide a homogeneous, highly pigmentable surface with limited fiber prints and good color. ENHANCED PART STRENGTH Glass reinforced parts exhibit improved mechanical properties, modulus and dimensional stability. Powder Relatively freeflowing with a high bulk density for use in formulations requiring very uniform dispersion and short fibers with median fiber lengths typically in the range of 40 110 microns.

U801/U809 continuous filament mats represent specific solutions to homogeneously reinforce expanded polyurethane foam. CUSTOMIZED FOR P U FOAM PROCESS U801/U809 specific design helps to even mat expansion during the PU foaming process. U809 is compatible with CO2 blowing agent used in insulating material manufacturing process. Excellent glass/polyurethane bonding brings improved mechanical performance and dimensional stability to the PU foam. U801 superior drapability fits the most complex mold shapes. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. U801/U809 mats are compatible with polyurethane resin systems and designed for PU foam reinforcement process. U809 is suited for LNG (Liquified Natural Gas) carrier cryogenic insulating systems. U801 is recommended for PU foam reinforcement in replacement of wood structure, in housing and recreational vehicle applications. NOMINAL MAT WEIGHT (G/CM2):225 - 300 - 450 - 600 - 900 NOMINAL MAT WEIGHT (OZ./SQ.FT):0.75 - 1.0 - 1.5 - 2.0 - 3.0 ROLL WIDTH (CM):127 - 128

SE8400 Type 30™ singleend roving is specifically designed for pultrusion processing in applications requiring high electrical resistance. Produced with Advantex®, corrosionresistant ECR glass technology by Owens Corning. Compatible with polyester, vinyl ester and epoxy resins. EFFICIENT PROCESSING Better wetout in polyester, vinyl ester, and epoxy resin, offering fast processing and good glasstoresin bonding, resulting in optimized part production. Good wetout and resin bonding results in excellent visual appearance of parts produced. GOOD MECHANICAL PROPERTIES Low seed glass results in excellent dielectric properties which are ideal for applications requiring high electrical resistance. ADVANCED SERVICE LIFE Advantex® corrosion resistant glass fiber combined with low seed glass is ideal for longterm electrical, physical, and acid resistance, reducing the potential for costly brittle fracture failures in the field. STRAND TENSILES: ASTM D 2343:Tensile Strength, psi (Mpa) AVG. E-701 POLYESTER RESIN:353,900 (2440) % GLASS :58.8 AVG. DER 331 EPOXY RESIN:338,800 (2336) % GLASS:54.5 TEX:4400 YIELD:113 MANUFACTURING REGION:North America

Fahrwerk Serie G Die Giganten - Gigantische Tragkraft und kompakte Abmessungen. Trotz extrem hoher Traglasten bieten wir Ihnen hier kompakte Fahrwerke – Einbauhöhe 180mm - mit denen Sie im Alltag gut arbeiten können. - Mit halbierter Rollenbreite und doppelter Rollenanzahl werden Lenkbewegungen deutlich erleichtert und Reibungskräfte bei Kurvenfahrt drastisch reduziert. - Alle Transportfahrwerke sofort einsatzbereit: Das Lenkwerk wird mit kugelgelagertem Drehteller und Deichsel geliefert. Traglast:30 t Einbauhöhe:180 mm

Ziehmesser/Oszilliermesser spitz für weiche Materialien. Als Oszilliermesser eingesetzt, ist dieses robuste Messer universal einsetzbar. Verwendung: EOT, POT 0.63 mm, UCT Einsatzhülse 40, SCT Empfohlene Materialien: Faltkarton; 100g - 1500g Dichtungsmaterial Schaumstoff Leder Magnetfolie Polycarbonat Lackierplatte Papier; 100-400g Max. Schnitttiefe: 7.4 mm Messermaterial: HM Messerdicke: 0.63 mm Vorschnitt: 0.73 x Tm Hersteller Artikel-Nr.: 3910306 Artikel-Nr:20310015 Hersteller:Zünd Hersteller-Nr:3910306

10-Segmentmesser, ähnlich Z51/Z52, jedoch mit kleinerem Überschnitt und grösserer Schneidkraft. Verwendung: DRT, PRT Empfohlene Materialien: Textilien Technische Textilien Kohlfaser Glasfaser Aramidfaser Max. Schnitttiefe: 3.5 mm Messermaterial: HM Messerdicke: 0.6 mm Hersteller Artikel-Nr.: 3910335 Artikel-Nr:20310482 Hersteller:Zünd Hersteller-Nr:3910335

Typ: Fräser R125 Egenschaften: Ø 5.0 mm, Schaft Ø 6.0 mm,1 Schneide Empfohlene Materialien: Acryl Aluminium Max. Tiefe: 12.0 mm Max. U/min.: 37.200 Besonderheit: linksdrall Hersteller Artikel-Nr.: 3910749 Artikel-Nr:20310167 Hersteller:Zünd Hersteller-Nr:3910749

Schneidunterlage Cuttervlies Menge/Format: 1 Unterlage à 1.000 mm x 900 mm Stärke: ca. 3.0 mm Farbe: Schwarz Artikel-Nr:99310031.1 Hersteller:Diverse

Typ: Fräser R124 Egenschaften: Ø 4.0 mm, Schaft Ø 6.0 mm,1 Schneide, linksdrall Empfohlene Materialien: Acryl Aluminium Max. Tiefe: 12.0 mm Max. U/min.: 46.600 Besonderheit: linksdrall Hersteller Artikel-Nr.: 3910748 Artikel-Nr:20310166 Hersteller:Zünd Hersteller-Nr:3910748

Oszilliermesser mit kleinem Vorschnitt. Wie Z41, jedoch länger. Verwendung: EOT, POT 0.63 mm. Empfohlene Materialien: Leder Wellpappe Gewebe; Textile Filz Schaumstoff Max. Schnitttiefe: 13.2 mm Messermaterial: HM Messerdicke: 0.63 mm Vorschnitt: 0.8 + 0.18 x Tm Nachschnitt: 1.20 mm Hersteller Artikel-Nr.: 5002488 Artikel-Nr:20310453 Hersteller:Zünd Hersteller-Nr:5002488

Typ: Fräser R119 Egenschaften: Ø 6.0 mm, Schaft Ø 6.0 mm,2 Schneiden Empfohlene Materialien: Leichter Schaum < 52 kg/m³ Max. Tiefe: 40.0 mm Max. U/min.: 48.000 Hersteller Artikel-Nr.: 3910727 Artikel-Nr:20310494 Hersteller:Zünd Hersteller-Nr:3910727

Servofahrwerke Bei den JUNG Servo-Fahrwerken bieten wir Ihnen eine Kombination aus einem Kreiselfahrwerk und einem starrem Fahrwerk, vereint in einer Kassette. Somit können Sie die Servo-Fahrwerke als Lenkwerk, Fahrwerk oder Tandemfahrwerk verwenden. - Einbauhöhe: 150mm - Schwenkbare Lenkrollen reduzieren die Lenkkraft aus dem Stand um bis zu 80 %. - Spurtreues Fahren durch starre Hinterachse mit Professional-Rollen. - Jede Kassette kann als Lenk- oder Fahrwerk eingesetzt werden. - Extrem manövrierbar durch kugelgelagerten Drehteller mit rutschfestem Belag. - Flexibel einsetzbar als Lenkwerk, Fahrwerk oder Tandem. - 90° zum Fahrweg verschiebbar. - Bodenschonend, kein Abrieb durch den Rollenbelag. - Niedrige Einbauhöhe, geringes Eigengewicht. - Im Set mit zusätzlicher Deichsel zum Nachlenken an der Rückseite, dadurch sehr enge Kurvenradien fahrbar. - Geprüft ANSI ⁄ ASME (USA) Traglast:3,5 t Einbauhöhe:150 mm

158B Roving is specifically designed for use in filament winding applications using epoxy resin, where high strength is required. 158B is suitable to reinforce phenolic resins. Fast wetout properties and high burst strength maximize customers’ processing and minimize costs.EXCELLENT PROCESSING Smooth runout combined with low fuzz properties, result in smoother parts and less downtime for cleanup, enabling higher efficiencies and lower manufacturing costs. FAST WETOUT Allows the processor to optimize part production speed resulting in increased productivity and reduced costs. HIGH BURST STRENGTH Excellent glass/resin bonding, which provides high burst strength in pipe or vessels. CORROSION RESISTANT Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion.

Fahrwerk Serie G Die Giganten - Gigantische Tragkraft und kompakte Abmessungen. Trotz extrem hoher Traglasten bieten wir Ihnen hier kompakte Fahrwerke – Einbauhöhe 180mm - mit denen Sie im Alltag gut arbeiten können. - Mit halbierter Rollenbreite und doppelter Rollenanzahl werden Lenkbewegungen deutlich erleichtert und Reibungskräfte bei Kurvenfahrt drastisch reduziert. Dadurch wirkt sich die stark verminderte Reibung durch spurtreues Fahren positiv aus. - Alle Transportfahrwerke sofort einsatzbereit. Das Fahrwerk besteht aus 2 Kassetten mit Verbindungsstange. Traglast:30 t Einbauhöhe:180 mm