Produse pentru utilizat (9)

service de transport de marchandises jusqu'à 500 quintaux

Supply of mineral-insulated heating cables for pipes, gutters, ramps, and industrial applications. Heating cables are among the most commonly used solutions for heating pipes and surfaces, both external and internal, protecting them from cold damage. The complete range of heating cables offered by ESAF is suitable for various applications, including industrial contexts, for electric tracing and heating of tanks and cisterns, as well as domestic settings, to prevent pipes, gutters, or ramps from freezing. Why Choose Esaf Heating Cables: • Operating temperature down to -60°C • Easy to install with various available accessories • Cables suitable for large-scale tracing SUPPLY OF HEATING CABLES FOR DOMESTIC AND INDUSTRIAL USE ESAF specialises in the supply and sale of high-performance electrical resistors for the temperature control sector. Looking for more information? Contact us to request the catalogue of heating cables provided and explore the various solutions. CATALOGUE OF SUPPLIED HEATING CABLES Esaf offers a wide range of heating cables to suit every type of application, both domestic and industrial: • Self-regulating heating cables • Constant power heating cables • Mineral-insulated heating cables • Frost protection cables for metal and plastic pipes • Heating cables for roofs and gutters • Heating mats and trace heaters for ramps • Heating cables for long pipes • Heating cables for industrial processes • Accessories for heating cables

ART. 3372 CERNIERE PER NAUTICA IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione: 24pz Dimensioni (mm): 40x55x1,5

Sanavel Breathable, natural, non-toxic, indoor paint, based on potassium silicate. Mineral-based, active formulation, high mildewcide and anti-condensation performance, prepared according to traditional recipes, for use in ecological building interventions, new buildings and in the restoration of vintage buildings and monuments. Sanavel consists of potassium silicate, natural pigments. It has very high breathability, remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances and toxic emissions in general, and does not have thermoplastic effects. Restoring and decorative paint for interior environments. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc. Pre-existing paints (washable, organic, solvent based etc. ) must be thoroughly removed. Preliminarily treat the support with the fixative Sanaxil Fix. Apply by brush, roller or spray. Sanavel is "dust-free" (it has started to be consistent to the touch) after about 1 hour. It can be overcoated after 4-5 hours, while it will be dry in-depth after 10-12 hours. Apply from 0.30 to 0.40 liters of Sanavel per square metre of surface to be painted. Pail 4 l - Pail 14 l

Il Parametro Antiossidante Riducente Ferrico (FRAP) è una misura diretta del potere riduttivo totale di una matrice biologica ed un indice indiretto della capacità del sistema considerato di resistere al danno ossidativo. Il FRAP utilizza gli antiossidanti nel sistema biologico come agente riduttivo in un metodo colorimetrico basato su reazioni redox (Benzie IFF, Strani JJ, Anal Biochem 1996, 239: 70-76). La riduzione a pH acido del complesso TPTZ-Fe(III) alla forma ferrosa (Fe(II)) è caratterizzata da un colore blu intenso. La reazione viene monitorata misurando l'assorbanza della soluzione a 595 nm. Le assorbanze registrate vengono confrontate con una curva standard Fe(II) di valori noti. I risultati sono direttamente proporzionali al potere riduttivo totale dell'antiossidante nella miscela di reazione.

ART. 3370 CERNIERE PER NAUTICA IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione: 24pz Dimensioni (mm): 40x42x1,5

ART. 3370 CERNIERE PER NAUTICA IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione: 24pz Dimensioni (mm): 40x70x1,5

Sanadek Breathable, natural, non-toxic paint, for internal use, diffusive type, based on long hardening lime putty, prefiltered. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanadek has high breathability, it has remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and interior renovation paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. Apply from 0.30 to 0.40 liters of Sanadek per square metre of surface to be painted. Pail 4 l - Pail 14 l

Protech WAC-RC Single-component colored finish in water dispersion for the opaque protection of concrete surfaces and cementitious substrates, wall coverings, and appropriately prepared and primed floors. The product is a painting system suitable for environments with the presence of food, which can be used to protect walls and ceilings that comply with the HACCP protocol, in order to prevent possible food contamination. Excellent resistance to atmospheric agents and aggressive industrial environments Good water vapor permeability and water repellency Wide range of colors available Uniform matte finish Low maintenance over time Good resistance to diluted acids and alkalis, fuels and hydrocarbons Excellent resistance to detergents and disinfectants Excellent resistance to mold attack Perfectly washable It meets the following requirements: Legislative Decree n. 193 of 06/11/2007 “Implementation of Directive 2004/41/EC relating to food safety controls and application of community regulations in the same sector” - HACCP UNI 11021:2002 “Products and systems for painting environments with the presence of food”, in particular it is suitable for walls, ceilings and surfaces for which resistance to washing is required; can be washed with chloroactive detergent (detergent A); can be washed with alkaline degreaser (detergent B); can be washed with acid descaler (detergent C); can be washed with disinfectant (detergent D); resists temperature changes. Colored protective finish of concrete surfaces, cement plasters Anti-carbonation finishing of concrete structures Wall finishing for food, wine and butcher shops Wall finishing for chemical and pharmaceutical industries Finishing and coating of suitably prepared metal surfaces Protective finish for floors already treated with resins or primed Protective treatment of oxidized asphalt surfaces Finish for environments in the presence of food. Concrete The surfaces to be coated must be stable, clean and free of substances that can affect the adhesion of the coating such as dirt, grease, oil, traces of coatings and surface treatments, etc. Any weak or detaching parts must be removed before applying the product by mechanical sanding with diamond discs and dust extraction. The tensile strength must not be less than 1.5 N/mm². The application of Protech WAC-RC on new or particularly absorbent cementitious substrates must always be preceded by the application of a coat of Protech fix AC water-based anchoring primer. Wait 3-4 hours before applying the finish. Resin coatings The surfaces to be coated must be stable, clean and free of substances that can affect the adhesion of the coating such as dirt, grease, oil, etc. Sand the surface by mechanical sanding with diamond discs and dust extraction. It is advisable to wash the surfaces and wait for them to dry completely before applying the finish. The application of Protech WAC-RC on resinous and multilayer systems must always be preceded by sanding the entire surface in order to promote and guarantee optimal adhesion of the product to the support. PVC Wash the PVC surfaces to be treated with specific detergents to remove any substances that may affect the adhesion of the coating such as dirt, grease, oil, materials that block the pores in order to promote better capillary penetration of the product into the support. The application of Protech WAC-RC on PVC supports can be carried out directly with appropriate dilutions of the product in first and second coat. Steel Any welding residues must be removed and the joints sanded. Sandblast to cleanliness level Sa 2½ according to ISO8501-1. The surfaces to be coated must be free from dirt, oil, grease and impurities. Average surface roughness degree RZ ≥ 50 μm. An anti-corrosion treatment is recommended before applying the coating. The application of Protech WAC-RC on steel supports must always be preceded by the application of a coat of “surface tolerant” epoxy-polyamide primer in the solvent phase Syntech Poliurea Primer Epoxy Metal. Approximately 0.20 kg of Protech WAC-RC for each square meter of surface to be painted for each coat. Apply two coats.. Packaging: 20 kg bucket UM: €/kg