Produse pentru utilizat (152)

PETIT DÉJEUNER Un excellent petit-déjeuner est la base d'une bonne journée. d'une bonne journée ! Dans les bois, des hommes se battent pour du le riz au lait. SOUPES Rien ne vaut le froid pour se réchauffer qu'une soupe bien chaude ! Au début, les hommes pensaient que la soupe de betterave était réservée aux femmes. Aujourd'hui, ce sont eux qui l'apprécient, ce sont eux qui l'apprécient. REPAS PRINCIPAUX Avec viande ! Sans viande ! Sans gluten sans gluten ! Sans lactose ! Végétalien ! Il y en a pour tous les goûts ! Si vous aimez les plats plus épicés, ajoutez un peu moins d'eau. un peu moins d'eau. Si vous recherchez une plus doux, ajoutez un peu plus d'eau. LE DÉVELOPPEMENT EST NOTRE QUOTIDIEN Nous développons nos produits et concevons de nouvelles solutions globales, en impliquant à la fois le le Centre des sciences de l'alimentation et les Forces spéciales de différents pays et les principaux acteurs dans le domaine des activités de plein air. processus. HAUTE :ÉNERGIE BONNES :CALORIES POIDS :LÉGER

Protech WAC-RC Single-component colored finish in water dispersion for the opaque protection of concrete surfaces and cementitious substrates, wall coverings, and appropriately prepared and primed floors. The product is a painting system suitable for environments with the presence of food, which can be used to protect walls and ceilings that comply with the HACCP protocol, in order to prevent possible food contamination. Excellent resistance to atmospheric agents and aggressive industrial environments Good water vapor permeability and water repellency Wide range of colors available Uniform matte finish Low maintenance over time Good resistance to diluted acids and alkalis, fuels and hydrocarbons Excellent resistance to detergents and disinfectants Excellent resistance to mold attack Perfectly washable It meets the following requirements: Legislative Decree n. 193 of 06/11/2007 “Implementation of Directive 2004/41/EC relating to food safety controls and application of community regulations in the same sector” - HACCP UNI 11021:2002 “Products and systems for painting environments with the presence of food”, in particular it is suitable for walls, ceilings and surfaces for which resistance to washing is required; can be washed with chloroactive detergent (detergent A); can be washed with alkaline degreaser (detergent B); can be washed with acid descaler (detergent C); can be washed with disinfectant (detergent D); resists temperature changes. Colored protective finish of concrete surfaces, cement plasters Anti-carbonation finishing of concrete structures Wall finishing for food, wine and butcher shops Wall finishing for chemical and pharmaceutical industries Finishing and coating of suitably prepared metal surfaces Protective finish for floors already treated with resins or primed Protective treatment of oxidized asphalt surfaces Finish for environments in the presence of food. Concrete The surfaces to be coated must be stable, clean and free of substances that can affect the adhesion of the coating such as dirt, grease, oil, traces of coatings and surface treatments, etc. Any weak or detaching parts must be removed before applying the product by mechanical sanding with diamond discs and dust extraction. The tensile strength must not be less than 1.5 N/mm². The application of Protech WAC-RC on new or particularly absorbent cementitious substrates must always be preceded by the application of a coat of Protech fix AC water-based anchoring primer. Wait 3-4 hours before applying the finish. Resin coatings The surfaces to be coated must be stable, clean and free of substances that can affect the adhesion of the coating such as dirt, grease, oil, etc. Sand the surface by mechanical sanding with diamond discs and dust extraction. It is advisable to wash the surfaces and wait for them to dry completely before applying the finish. The application of Protech WAC-RC on resinous and multilayer systems must always be preceded by sanding the entire surface in order to promote and guarantee optimal adhesion of the product to the support. PVC Wash the PVC surfaces to be treated with specific detergents to remove any substances that may affect the adhesion of the coating such as dirt, grease, oil, materials that block the pores in order to promote better capillary penetration of the product into the support. The application of Protech WAC-RC on PVC supports can be carried out directly with appropriate dilutions of the product in first and second coat. Steel Any welding residues must be removed and the joints sanded. Sandblast to cleanliness level Sa 2½ according to ISO8501-1. The surfaces to be coated must be free from dirt, oil, grease and impurities. Average surface roughness degree RZ ≥ 50 μm. An anti-corrosion treatment is recommended before applying the coating. The application of Protech WAC-RC on steel supports must always be preceded by the application of a coat of “surface tolerant” epoxy-polyamide primer in the solvent phase Syntech Poliurea Primer Epoxy Metal. Approximately 0.20 kg of Protech WAC-RC for each square meter of surface to be painted for each coat. Apply two coats.. Packaging: 20 kg bucket UM: €/kg

Bulletproof Pants with the peculiarity of replacement of the ballistic elements that go in the soft state from the level STANAG 2920 with fragments from 450 meters per sec at level NIJSTD0101.04 IIIA 9 mm - 44mag 440 meters per sec until you get to insert in the removable bags with velcro, rigid panels level NIJSTD0101.04 III - 7.62 NATO. Colors and writings at the customer’s request. Accessories Braces and adjustable belt. Weight: 2 kg The weight may vary depending on the protection requested by the customer. weight :2,00 kg MODULABLE ELEMENTS:REPLACEABLE material:NOMEX 3 ANTIFIAMMA KERMELL KEVLAR KEVLAR XP TWARON GOLDFLEX

FEATURES - High impact resistance polycarbonate shell with head ventilation system, - Internal polystyrene lining for maximum absorption bumps, - Padded internal lining in fireproof fabric, - 4 mm polycarbonate visor with locking up or down, - Shaped neck protection with inserts in polycarbonate and fireproof fabric covering, - Quick release retention system with chin guard removable. Sizes: One size Weight: - 1,350 grams Colors: - White, - Blue, - Light blue, - Green. INTERNAL COVERING :FIREPROOF FABRIC VISOR:POLYCARBONATE - 4MM shell:POLYCARBONATE

Each panel is contained in a fabric lining suitable to protect from rays ultraviolet within the band of spectrum of 2,200 Armstrong. The outer lining is made of fabric 65% polyester 35% cotton, or CORDURA®. Easily adjustable and usable in each operational situation. Anti-crease and easily washable, this one feature comes from the ability to remove ballistic panels. WRITTEN:REMOVABLE LINING:CORDURA POLYESTER 65% COTTON 35% MATERIAL:KEVLAR DUPONT GOLD FLEX KEVLAR XP DYNEEMA TWAROM

This bag that, when opened, transforms into a bulletproof vest is designed to be used to escort VIPs. The design is designed for very quick and easy donning and use. The outer lining is made of CORDURA 1000D or NYLON 1000D. Weight: 1.900 kg. One size. Color: Black. INTERNAL MATERIAL:composite EXTERNAL MATERIAL:nylon 1000D EXTERNAL MATERIAL:cordura 1000D

1 utility pouch con chiusura a cerniera con passanti elastici interni e tasca a scomparsa, per trasporto di materiale vario. 1 tasca doppia porta caricatore per pistola calibro 9 mm regolabili. 2 tasche doppie porta caricatore per calibro 5.56 x 45 mm. 1 tasca doppia porta granata da 40 m. 1 tasca porta radio. 1 tasca admin agganciabile sul petto, con tasca a scomparsa, tasca secondaria e porta caricatore per pistola,con chiusura a velcro regolabile. 1 tasca porta vescica per idratazione (vescica non inclusa). 8 spazi porta caricatore per calibro 5.56 x 45 mm 1 sacca a scomparsa porta caricatori esausti.

Piramide olfattiva Ogni goccia di Essenza Concentrata Fior di Loto è studiata per profumare tutto il bucato. Il suo inebriante profumo regala alla biancheria la più tenera delle suggestioni perma­nendo nel tempo. Un liquido da aggiungere all’ammorbidente nel bucato a mano, in lavatrice durante l’ultimo risciacquo. Profuma Bucato Fior di Loto è priva di parabeni e nichel free

Ogni goccia di Essenza Concentrata Spring è studiata per profumare tutto il bucato. Un’esplosione di freschezza duratura con una combinazione di note dolci e floreali che accentuano l’intensità del profumo donando ai capi un carattere deciso. Un liquido da aggiungere all’ammorbidente nel bucato a mano, in lavatrice durante l’ultimo risciacquo. Profuma Bucato Spring è priva di parabeni e nichel free.

Ammorbidente con una formulazione altamente concentrata, professionale e con profumazione di lunga durata. Ammorbidente HQ Eco Green presenta una speciale formulazione, che contiene il 100% di tensioattivi e sostanze ammorbidenti di origine vegetale. Il nostro liquido ammorbidente è ottimizzato per sistemi automatici di lavaggio biancheria.

Il nostro sgrassatore pre-trattante G2 è una soluzione fortemente concentrata e sgrassante ideale per rimuovere le macchie più difficili dai tessuti. Grazie alla sua formula avanzata, questo prodotto è in grado di agire efficacemente su una vasta gamma di macchie, come quelle di grasso, olio, vino, caffè e altro ancora. Il nostro sgrassatore pre-trattante è facile da usare, può essere diluito e usato nebulizzandolo direttamente sulla macchia, lasciandolo agire per alcuni minuti prima di metterlo nella lavatrice o dosandolo direttamente durante lavaggio. La macchia scomparirà senza lasciare tracce. Prova il nostro sgrassatore G2 pre-trattante contro le macchie difficili e scopri la differenza!

Ogni goccia di Essenza Concentrata Eden è studiata per profumare tutto il bucato. Questa fragranza può essere definita “indimenticabile”, merito della sua piramide ol­ fattiva che mescola intense note fiorite ad un fondo boisé. Un liquido da aggiungere all’ammorbidente nel bucato a mano, in lavatrice durante l’ultimo risciacquo. Profuma Bucato Eden è priva di parabeni e nichel free.

Ogni goccia di Essenza Concentrata Orchidea è studiata per profumare tutto il bucato. Le sue note dal sapore estremamente femminile ed elegante sono impreziosite dall’es­senza delicata del suo fiore che rilascia sui capi l’armonia e la sensazione di passione e amore. Un liquido da aggiungere all’ammorbidente nel bucato a mano, in lavatrice du­rante l’ultimo risciacquo. Profuma Bucato Orchidea è priva di parabeni e nichel free.

Ammorbidente HQ Neutro è un liquido ammorbidente igienizzante concentrato coaudiuvante antistatico che conferisce freschezza e morbidezza ai tessuti. Ammorbidente HQ igienizzante è un liquido ammorbidente neutro senza profumazione. Può essere utilizzato da solo o insieme alle nostre Essenze Bucato.

Isole del Gusto con vetrina refrigerata ventilata per autoservizio, robusto telaio in acciaio cromato su ruote, rivestimento essenziale in laminato ed illuminazione a LED.Profondità regolabile per l’esposizione temporanea di prodotti contenuti in vaschette (max. h=200mm), in bottiglia o in appoggio sul fondo/piano. Gas refrigerante R290 (GWP3). MODELLI ES BULE PLANTINUM PIUS 3 Capacità vaschette (GN):3 MODELLI ES BULE PLANTINUM PIUS 3 Range:+4/+8 °C MODELLI ES BULE PLANTINUM PIUS 3 Dimensioni mm:1169x760x1688 MODELLI ES BULE PLANTINUM PIUS 4 Capacità vaschette (GN):4 MODELLI ES BULE PLANTINUM PIUS 4 Range:+4/+8 °C MODELLI ES BULE PLANTINUM PIUS 4 Dimensioni mm:1494x760x1688

Vetrine refrigerate per il self service studiate per garantire un’ottima visibilità ai piatti ed agli alimenti esposti. Refrigerazione ventilata canalizzata verticalmente per garantire una temperatura omogenea sui 3 ripiani.Vasche per il self service con profondità regolabile per l’esposizione temporanea di prodotti contenuti in vaschette (max. h=200mm) o in appoggio sul fondo/ piano. MODELLI BULE PLANTINUM PIUS 3 Capacità vaschette (GN):3 MODELLI BULE PLANTINUM PIUS 3 Range:+4/+8 °C MODELLI BULE PLANTINUM PIUS 3 Dimensioni mm:1169x760x1485 MODELLI BULE PLANTINUM PIUS 3 Dimensioni foro mm:1135×726 MODELLI BULE PLANTINUM PIUS 4 Capacità vaschette (GN):4 MODELLI BULE PLANTINUM PIUS 4 Range:+4/+8 °C MODELLI BULE PLANTINUM PIUS 4 Dimensioni mm:1494x760x1485 MODELLI BULE PLANTINUM PIUS 4 Dimensioni foro mm:1460×726 MODELLI BULE PLANTINUM PIUS 5 Capacità vaschette (GN):5 MODELLI BULE PLANTINUM PIUS 5 Range:+4/+8 °C MODELLI BULE PLANTINUM PIUS 5 Dimensioni mm:1819x760x1485 MODELLI BULE PLANTINUM PIUS 5 Dimensioni foro mm:1785×726

Isole del Gusto refrigerate con vasca ventilata, robusto telaio in acciaio cromato su ruote, rivestimento essenziale in laminato e sovrastruttura in vetro con illuminazione a LED.Gas refrigerante R290 (GWP3). MODELLI ES BULE PIUS 3 Capacità vaschette (GN):3 MODELLI ES BULE PIUS 3 Range:+4/+8 °C MODELLI ES BULE PIUS 3 Dimensioni mm:1169x760x1288 MODELLI ES BULE PIUS 4 Capacità vaschette (GN):4 MODELLI ES BULE PIUS 4 Range:+4/+8 °C MODELLI ES BULE PIUS 4 Dimensioni mm:1494x760x1288 MODELLI ES BULE PIUS 6 Capacità vaschette (GN):6 MODELLI ES BULE PIUS 6 Range:+4/+8 °C MODELLI ES BULE PIUS 6 Dimensioni mm:2144x760x1288

Il BINS2 è un carro raccoglifrutta semovente progettato per ottimizzare la raccolta e la potatura nei moderni impianti ad interfilare ridotto. Dotato di due piattaforme di lavoro, una anteriore fissa e una posteriore ad elevazione idraulica, offre una larghezza chiusa di 1,70 metri e può essere aperto fino a 3,10 metri. La lunghezza del piano è di 1,50 metri, con un'altezza massima di 2,50 metri. Equipaggiato con 4 ruote motrici e sterzanti indipendenti, il BINS2 garantisce una manovrabilità eccellente, mentre gli elevatori idraulici anteriori e posteriori facilitano il carico e scarico dei bins.

Il M9DT24 è un carro raccoglifrutta semovente progettato per ottimizzare la raccolta e la potatura nei moderni impianti ad interfilare ridotto. Dotato di un piano di lavoro unico ad elevazione idraulica, offre una larghezza chiusa di 1,30/1,50 metri e può essere aperto fino a 2,28/2,80 metri grazie alle aperture idrauliche. La lunghezza del piano è di 2,00 metri, con un'altezza massima di 2,40 metri. Equipaggiato con 4 ruote motrici e sterzanti indipendenti, il M9DT24 garantisce una manovrabilità eccellente, mentre gli elevatori idraulici anteriori e posteriori facilitano il carico e scarico dei bins.

Il M9DT26 è un carro raccoglifrutta semovente ideale per la raccolta e la potatura in impianti ad interfilare ridotto. Questo modello è dotato di un piano di lavoro ad elevazione idraulica con larghezza chiusa di 1,30/1,50 metri, apribile fino a 2,28/2,80 metri. La lunghezza del piano è di 2,50 metri, con un'altezza massima di 2,60 metri. Il M9DT26 è equipaggiato con 4 ruote motrici e sterzanti indipendenti, garantendo una manovrabilità superiore. Gli elevatori idraulici anteriori e posteriori facilitano il carico e scarico dei bins, mentre la trasmissione idrostatica e il cambio a due rapporti a comando elettrico assicurano un controllo preciso della velocità.

L'HF4000 è un carro raccoglifrutta semovente progettato per la raccolta e la potatura nei moderni impianti ad interfilare ridotto. Dotato di un piano di lavoro unico ad elevazione idraulica, offre una larghezza chiusa di 1,30/1,50/1,70/1,80 metri e può essere aperto fino a 2,28/2,80/3,10/3,30 metri. La lunghezza del piano è di 4,00 metri, con un'altezza massima di 2,50/2,90 metri. Equipaggiato con 4 ruote motrici e sterzanti indipendenti, l'HF4000 garantisce una manovrabilità eccellente, mentre gli elevatori idraulici anteriori e posteriori facilitano il carico e scarico dei bins.

L’azienda Commercializza pallets in plastica ottenuti dall'impiego di materiali da riciclo e conformi ai requisiti specificati nel Regolamento di certificazione "Plastica Seconda Vita".

UNIFILO® 800 Series continuous filament mats represent a large choice of tailored reinforcement solutions for efficient manufacture of various composite parts by closed mold process. EFFICIENT PROCESSING U850 high permeability product family enables enhanced resin flow in highly filled systems. U810 product family offers a good compromise between low, medium and high drapability and permeability. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. U800 products are available with varying strand design and binder contents to match up with specific customer applications. U800 Series mats are compatible with unsaturated polyester, vinyl ester, acrylic and epoxy resins. They are designed to be processed in closed mold processes including RTM (high and lowpressure injection), infusion and compression molding. Applications include heavy truck, automotive and industrial parts. NOMINAL MAT WEIGHT (G/CM2):225- 300 - 450 - 600- 900 NOMINAL MAT WEIGHT (OZ./SQ.FT.):0.75 - 1.0 - 1.5 - 2.0 - 3.0 ROLL WIDTH (CM):127- 138

QUALITY DESIGNED TO INCREASE PRODUCTIVITY M723A chopped strand mat represents an ideal solution for demanding applications requiring good surface finish and exceptional mechanical properties, in hand layup or closed mold processes. EASY HANDLING AND MOLDABILITY Very good glass bonding provides excellent dry handling characteristics and minimized fiber shedding during molding process. HIGH PROCESS EFFICIENCY Fast wetting and quick air release help reducing the labor required to roll out the part. Exceptional wet tensile strength perfectly fits wet and carrying process. HIGH PERFORMANCE Optimized product design allows good surface finish and smooth surface behind gelcoat while providing the final part with exceptional tensile and flexural performances. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. NOMINAL MAT WEIGHT (G/SQ.M):300 - 450 – 600 - 900 NOMINAL MAT WEIGHT (OZ./SQ.FT):1.0 – 1.5 – 2.0 – 3.0 ROLL WIDTH (CM):96.5 - 127 – 152.4 ROLL WIDTH (IN):38 – 50 - 60 NOMINAL MAT WIDTH (CM):96.5 - 127 - 152.4 NOMINAL MAT WIDTH (IN):38 - 50 - 60 ROLL DIAMETER (CM):28.6 ROLL DIAMETER (IN):11 1/4 ROLLS PER PALLET:16 PALLET SIZE (CM):114.3 x 114.3 PALLET SIZE (IN):45 x 45

SE2350 singleend Type 30® roving is designed for applications requiring high strength, efficient processing and demanding fatigue life. Maximum strand integrity results from uniform distribution of a proprietary sizing system ensuring excellent resintoglass binding. EXCELLENT PROCESSING Smooth runout from lower drag across contact points produces less fuzz, resulting in smoother parts, less cleanup, and improved machine efficiencies. FAST WETOUT WITH REDUCED COST Fast, uniform strand wetout leads to higher glass loading and good adhesion with reduced resin in both amine and anhydride cured epoxy resin systems. This results in optimized part production speed and increased productivity, reducing manufacturing costs. GOOD MECHANICAL PROPERTIES Excellent shear and tensile properties in both amine and anhydride resin systems; good laminate properties in burst, static, and cyclic fatigue provide maximum part strength and long part service life. STRAND TENSILES: ASTM D 2343:Amine/DER 331 Epoxy Resin STRENGTH (MPA):2240 STRENGTH (KSI):325 INTERLAMINAR SHEAR STRENGTH NOL RING: ASTM D 2344:Amine/DER 331 Epoxy Resin DRY SHEAR STRENGTH (MPA):64.4 DRY SHEAR STRENGTH (PSI):9340 SHEAR STRENGTH RETENTION 72 HR BOIL (%):95% YIELD:250 (16 and 22 micron) TEX:2000 (16 and 22 micron) MANUFACTURING REGION:North America

M6X1 chopped strand mat represents a compelling solution for large and thick part manufacturing when high productivity is required in hand layup or closed mold processes. EASY HANDLING AND MOLDABILITY Optimized chop length mix provides superior dry tensile strength while bringing good conformability to contoured molds. HIGH PROCESS EFFICIENCY Fast wetthrough and low resin pickup combined with excellent handling properties in dry and wet conditions. This makes the product an ideal choice for large and thick parts production with dry and wetcarrying process. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. HAND LAY UP CLOSED MOLDS M6X1 mat is designed for use with polyester, vinyl ester resin systems inhand layup or closed mold applications including automotive parts, boats, chemical tanks and pools. (Picture copyright nostal6ie, shutterstock.com. For application illustration only.) NOMINAL MAT WEIGHT (G/CM2):225 - 300 - 450 – 600 ROLL WIDTH (CM):95 - 125 ROLL Ø (CM):30 ROLLS PER PALLET:12 PALLET SIZE (CM):127x97

Owens Corning surfacing glass NonWovens key product benefits are high strength performance, hot tensile and thermal stability, helping improved dimensional stability and preventing tiles from curling and shrinking.

790C wet use chopped strand (WUCS), featuring Advantex® glass fibers, is specifically designed for higherfeed rate processes in dry feed applications. EXCELLENT FIRE/FLEXURAL STRENGTH Engineered to provide fire resistance performance and meet regional building codes. Improves flexural strength of wallboards for ease of handling and installation. High strength characteristics to enhance abuse resistant wallboard systems. EFFICIENT PROCESSING Designed to improve higherfeed rate processes where the uniform glass dosage rate and dispersion reduces feed flow variations and causes clumps. ENHANCED GLASS FIBER CHARACTERISTICS Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. Boronfree Advantex® glass contributes to decreased emissions, reduces the environmental impact of manufacturing fiberglass, and provides superior performance in corrosive environments compared to standard Eglass. PHYSICAL PROPERTY:Softening Point ADVANTEX(R) GLASS:916 °C TRADITIONAL E-GLASS:850 - 870 °C MOISTURE CONTENT:5.3 - 8.3% % STRAND SOLIDS LEVEL:.14 - .22% FIBER DIAMETER:14.4 - 17.6μ

OptiSpray® F Roving represents a compelling solution for fabricators that want to save time and resin while increasing the performance of their products. INCREASED EFFICIENCY Low fuzz combined with easy chopping, flat lay down and uniform dispersion saves time. REDUCED COST Higher glass loading with optimal resin consumption reduces the amount of expensive resin required. GREAT PERFORMANCE Good mechanical properties, great surface quality, excellent conformability, doesn't trap air, low spring back. FAST WETOUT Designed to provide optimal performance for sprayup applications where fast wetout speed is preferred; great performance in various types of part complexities. Owens Corning also offers Technical Support, which focuses on trouble shooting and increased productivity for our customers.

M705 chopped strand mat represents a compelling solution to hand lay up high glass content and thin laminates balanced with good mechanical properties. EASY HANDLING & MOLDABILITY Optimized chop length mix provides good confirmability to complex contoured molds. PROCESS EFFICIENCY Fast wetting and quick air release help reduce the labor required to roll out the part. BALANCED PERFORMANCES Moderate impregnation speed reduces resin consumption, resulting in thinner laminate with high glass content, and improved mechanical properties. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. M705 mat is designed for use with unsaturated polyester, vinyl ester resin systems in hand layup applications including automotive parts, boats, chemical tanks and pools. NOMINAL MAT WEIGHT (G/CM2):225 - 300 - 375 - 450 - 600 ROLL WIDTH (CM):95 - 104 - 125 NOMINAL MAT WIDTH (CM):95 -104 -125 ROLL DIAMETER (CM):30 ROLLS PER PALLET:12 PALLET SIZE (CM):127 x 97