Produse pentru utilizat (145)

Knight Optical can offer you stock and custom lambda/10 mirrors for use in imaging applications, in a range of materials such as BK7 or equivalent, Zerodur, Quartz, UV Fused Silica and many more. Mirrors are made from low expansion glass for optimum stability to maintain the lambda/10 flatness. The mirrors help produce high quality images and can be coated with a variety of coatings to ensure that the perfect quality image in the wavelength you require is achieved: •Enhanced aluminium 94%R for visible applications. •99.9% dielectric for laser use in visible applications. •UV aluminium for UV applications down to 180nm. •98.5% dielectric for laser use in the NIR applications. •Ion plated silver for NIR-2000nm applications. •Protected gold for 750nm to far infra-red applications Lambda/10 mirrors are used to produce a better quality signal from the mirror, resulting in a higher quality imaging. Read PDF for more information… Material::N-BK7 (or equivalent), Zerodur, UV Fused Silica, Borosilicate Shape::Circular, Square or rectangular Dimensional Tolerances::+/- 0.5mm Parallelism::< 3 arcminutes Surface quality::<10-5 Scratch/Dig Flatness:: λ/10 or λ/20 over 90% of mirror aperture Coating::A range of mirror coatings to suit your wavelength

Knight Optical We offer Stock Polarisers used in the visible range in cameras/photography. We supply a range of Polarizer options for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Linear Polarisation can be split into P-Polarised (Light where the electric field is Parallel to the plane of incidence) and S-Polarised (Light where the electric field is Perpendicular to the plane of incidence) light, where a polariser can be used to eliminate one plane of polarisation. This is done to decrease ‘glare’ (reflections on the surface) when an image is being taken, and increase the contrast. This is used often with cameras to obtain ‘better’ image quality at the expense of an image that appears slightly darker. For more information read the PDF…. Material::N-BK7 or Equivalent Diameter Tolerance::+0.0/-0.25mm Length/Width Tolerance::±0.5mm (<100mm) ±1mm (100-400mm), nominal (>400mm) Axis direction: :±2°

KO can offer Metallic Neutral Density Filters for use in Photographic Applications. We supply a range of Metallic Neutral Density (ND) Filters for a variety of applications – all individually QA checked and metrology tested for quality to ensure parts meet customers’ specifications. What’s more, our Metallic ND Filters are supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Our Metallic ND Filters reflect (with a metallic coating) light neutrally over a wavelength range (typically visual). They can be used to lower the intensity of light prior to the image plane. These are often used in photography, allowing photographers more flexibility with their setups to achieve desired effects. Often, an ND filter will be used in conjunction with a long exposure to prevent washed-out and overexposed images. They can also be used to add motion blur, reduce depth of field and to use a wider aperture. For more information read PDF… Shapes: :Circular Filters, Square Filters Dimensional Tolerances::+/- 0.1mm Flatness::< 5(1) @ 632.8nm Surface quality::< 40-20 Scratch/Dig

Knight Optical can offer Pellin-Broca Prisms for use within Atomic Spectroscopy. We supply a range of Pellin-Broca Prisms for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Atomic Spectroscopy. Pellin-Broca Prisms are designed with a given material, angle and wavelength in mind to perfectly deviate a beam of the given wavelength by 90 degrees. These are often used to separate beams of differing colours and as such are ideal for use in optical atomic spectroscopy or to separate outputs of a multi-line laser. For more information read PDF…

Knight Optical can offer custom Rod Lenses for use within Optical Systems. We supply a range of custom & stock Rod lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Rod Lenses are a special variant of cylindrical lenses so they focus light to a line. Rod lenses have an outside face that is polished and the ends are ground. Typical uses for rod lenses would be to generate a line image from a circular laser beam. Rod lenses can be cut at 45 degrees for use in beam steering and other similar applications. For more information read PDF ….. Material::N-BK7 or equivalent, Borosilicate, UV Fused Silica Shapes::Plane, 45° Dimensional Tolerances::+/- 0.1mm Centering::< 3 arcminutes Surface quality::< 40-20 Scratch/Dig Surface Figure: :< 5(1) @ 633nm Coating::Antireflective coatings for application bandwidth (if required) Mounting::Available on request

Knight Optical can offer dichroic bandblocking filters for use in Fluorescence Microscopy. We supply a range of dichroic bandblocking filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in fluorescence microscopy. Dichroic bandblocking filters are used to block a specific wavelength band and transmit the rest. Our Dichroic bandblocking filters are usually made for bands between 300-1200nm. Our dichroic filters are usually specced for a 0° AOI. Use at a 45° results in a CWL shift of around 35-50nm. They are used as beamsplitters in fluorescence microscopy to transmitting For more information read PDF…. Material::Borosilicate Dimensional Tolerances::±0.1mm Wavelength Range::CWL between 300-1200nm Wavelength Accuracy: :± 5nm Peak Transmission::> 95% out of band FWHM: :Dependant on type Surface quality: :< 40/20

Knight Optical can offer UV Fused Silica Windows for Vacuum Applications. UV Fused Silica is a relatively hard optical glass with a very low coefficient of thermal expansion. This means that it is a good choice for us in Vacuum applications, as any difference in temperature will not affect the optical performance. In addition to the above, UV FS has high transmission from UV to NIR meaning that there is little loss of image when it is used for a Vacuum Window/viewport and therefore the quality of the optical system is not compromised. All our UV Fused Silica Lenses are fully inspected on their quality in our ISO 9001 certified, state-of-the-art Metrology laboratory, using our Trioptics Optispheric, and Starrett AV300 and Zygo Verifire XPZ. This allows us to work to the highest QA standards and meet the tolerance specifications on these precision components Read PDF for more info Material::UV Grade Fused Silica Operating Wavelength::587nm Diameter Tolerance::+0 / -0.10mm Centring Tolerance::<5 arc min Focal Length Tolerance::± 0.2mm (<10mm) ±2.0% (10mm – 1000mm) Centre Thickness Tolerance::±0.2mm Surface Figure::3/ 3 (1) Surface quality::<40-20 Scratch/Dig Coating::Optional

Knight Optical offer a range of Stock Achromatic Doublet Lenses for use within Light Engines. Light engines are used for applications such as fibre optic lighting displays & in diagnostic tools like western blots & polymerase chain reaction systems. These Light Engines are typically able to produce changing colour displays. Within the light engine are a range of lenses & filters. The lenses help to homogenise and collimate the light, ensuring for a crisp high-quality beam output. Achromatic Doublets are typically used in light engine systems & correct for chromatic aberrations which exist in singlet lenses. This is when different wavelengths of light refract at different rates. The doublet lens helps to correct this by facilitating the focusing of the light to the same point. This is especially important in light engines which typically generate white light. Read PDF for more information Material::BK7, SF11 Overall Diameter Tolerance::+0/-0.10mm Focal Length Tolerance::± 1.0%

Knight Optical can offer Gelatine Neutral Density Filters for use in Photographic Applications. We supply a range of Gelatine Neutral Density Filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Photographic Applications. Our Neutral Density Filters attenuate light neutrally over a wavelength range (usually visual). They can be used to lower the intensity of light prior to the image plane. These are often used in photography, allowing photographers more flexibility with their setups to achieve the desired effects. Often an ND filter will be used in conjunction with a long exposure to prevent washed out and overexposed images. For more information rread the PDF …. Shapes::Circular Filters, Square Filters Dimensional Tolerances::+/- 0.1mm Density::+/- 5% Surface Quality: :< 60-40 Scratch/Dig

Powderfree, nitrile single use disposable glove. Extremely strong and offers greater chemical and puncture resistance than regular nitrile disposables. ProductType:Hand Protection Material:Nitrile

Lightweight, powderfree, singleuse gloves with textured fingertips. ProductType:Hand Protection Glove Type:Disposable Nitrile Glove

Lightweight, powderfree, singleuse gloves with textured fingertips. Provides a very good alternative to Vinyl gloves. ProductType:Hand Protection Glove Type:Disposable Nitrile Glove

High performance, powderfree, nitrile single use disposable glove. Significantly stronger alternative to latex. ProductType:Hand Protection Glove Type:Disposable Nitrile Glove

Powderfree, nitrile single use disposable glove. Extremely strong and offers greater chemical and puncture resistance than regular nitrile disposables. ProductType:Hand Protection Material:Nitrile

Lightweight, powderfree, singleuse gloves with textured fingertips. ProductType:Hand Protection Glove Type:Disposable Nitrile Glove

Lightweight, powderfree, singleuse gloves with textured fingertips. ProductType:Hand Protection Glove Type:Disposable Nitrile Glove

Lightweight, powderfree, singleuse gloves with textured fingertips. ProductType:Hand Protection Glove Type:Disposable Nitrile Glove

Low temperature grease with very good wear protection, high carrying capacity, high metal affinity and long service life at negative temperatures to -54 °C. Oil based:Synthetic hydrocarbons Operating temperature range::-54°C to 120°C

For injection of Oil or Grease. E.g Into Bearings or Seals. For connecting into a 4 Jaw Hydraulic Coupler Lube Injector-D with Snap-on Coupling Part No. 32 408 44 For injection of Oil or Grease:For injection into bearings or seals For connecting into a 4 Jaw Hydraulic Coupler:Snap-on Coupling

Our Inspire range offers exceptional quality, stylish Infrared panel heaters in a wide variety of surfaces and finishes including white aluminium, white or black glass, picture, mirror and structured glass finishes. These beautiful energy-efficient heaters are of the highest quality and come complete with a 10 year guarantee.

Lightweight, powderfree, singleuse gloves with textured fingertips. ProductType:Hand Protection Glove Type:Disposable Nitrile Glove

High performance, powderfree, nitrile single use disposable glove. Significantly stronger alternative to latex. ProductType:Hand Protection Glove Type:Disposable Nitrile Glove

Lightweight, powderfree, singleuse gloves with textured fingertips. ProductType:Hand Protection Glove Type:Disposable Nitrile Glove

For all types of size reduction: 7.5KW to 1000KW - 50KG PER HOUR to 5000KG PER HOUR. Key Features - Free Standing and self supporting - Self regulating feed and easy access via low profile hopper - Outfeed size of material can easily be adjusted via quick change screens - Fully automatic control - Low operating costs and minimal service parts

Lightweight, powderfree, singleuse gloves with textured fingertips. ProductType:Hand Protection Glove Type:Disposable Nitrile Glove