Produse pentru ss moara tub (36)

Ons assortiment telt 15 000 artikelen, waaronder: RVS buizen 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541- Rondstaven van roestvrij staal 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 - Gelaste en niet gelaste buizen van roestvrij staal 904L 1.4539 UB6 - Massieve rondstaven van roestvrij staal UB6 904L 1.4539 - Vuurvaste buis en rondstaf 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex buizen UNS S31803 1.4462 - Super duplexbuizen UNS S32750 S32760 1.4410 1.4501- Massieve duplex- en super duplexrondstaven 1.4462 1.4410 1.4501 - Roestvrij plaatstaal 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541- Vuurvaste plaat 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplexplaten UNS S31803 1.4462 - Super duplexplaten UNS S32750 S32760 1.4410 1.4501- Platen van roestvrij staal UB6 904L 1.4539 - Buizen van legeringen 600; 601; 800; 825 - Hastelloy C276 - Buizen en platen 2.4816; 2.4851; 2.4856; 2.4360 - Flenzen van roestvrij staal duplex super duplex 904L UB6 1.4539

Tubes Titane

Aluminiumwerk Unna AG is specialised in the production of Aluminium tubes. The Aluminium tubes are extruded on site using two possible methods. These are either Seamless extrusion or Porthole extrusion. It is quite simple to distinguish between the two extrusion methods. In seamless extrusion, a mandrel is positioned and fixed inside the extrusion die, creating the inner contour of the tube. In porthole extrusion, the mandrel is fixed and is supported by a number of integral bridges affixed to the outer portion of the extrusion die.

Tubi di precisione trafilati a freddo in acciaio inox per cilindri oleodinamici - Tubi di precisione trafilati a freddo senza saldatura per cilindri oleodinamici in conformità alla norma EN10305-1 Acciaio inox AISI 304/304L e 316/316L Alesati/rullati/levigati ISO H8 In lunghezze commerciali 5-10 m o tagliati a misura Lunghezze commerciali:5-10 m

It carries out the transportation in horizontal and angular directions in places where there is a difference in elevation.

Valve mechanical shaft fittings,CNC machining.

Tube en inox 316, pour l'extérieur, diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 5 m Référence:0650.0500.6021 Matière:Inox 316 (Extérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur Diamètre tube:42,4 x 2 mm Longueur:5 mètres Section:Rond

Duplex UNS S31803/1.4462 is a duplex stainless steel with approximately 50% ferrite and 50% austenite. This grade has good mechanical strength at room temperature, resistant to corrosive attack, including pitting and is resistant to stress corrosion cracking. The grade is a successful alternative to the normal 300 series austenitic stainless steels, where its higher strength and resistance to stress corrosion cracking is required in critical applications. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):500 J/kg/°K Thermal conductivity:15 W/m/°K Thermal Expansion:13 μm/μm/°C Modulus Elasticity:200 Gpa Electrical Resistivity:8.5 μohm/cm Density:7.8 g/cm3

Weltweit einzigartig ist bei der Schierle Stahlrohre GmbH & Co. KG die Möglichkeit der Kombination aus dem Bezug von Stahlrohren und -stangen als Handelsware sowie von maßgeschneiderten Komponenten auf Kundenwunsch und nach Zeichnung für die verschiedensten Anwendungen. Das Produkt "Geschweißte Zylinderrohre (HPS)" weißt die folgenden Spezifikationen auf: Werkstoff: E235+C (St37-2 BK) bzw. E355+C (St52-3 BK) Toleranz AD: gem. EN10305-2 (DIN 2393) für kaltgezogene Rohre Toleranz ID: gem. ISO H9 - H10 (siehe Abmessungen) Rauigkeit: Ra max. 0,8 μm Geradheit: gerichtet auf 1 : 1.000 mm gemessen am Außendurchmesser Exzentrizität: gem. EN10305-2 (DIN 2393-1/-2) für kaltgezogene Rohre Herstellungslängen: 1,5 – 11 m Kompetenz in der Qualitätssicherung. Die Schierle Stahlrohre GmbH & Co. KG verfügt seit 1994 über ein Qualitätsmanagementsystem, das die Norm DIN EN ISO 9001:2008 erfüllt.

Konstruktionsrohre, Stahl / Aluminium / Edelstahl, für Rohr-Klemmverbinder Ausführung in Stahl ST verzinkt, blau passiviert ZB Ausführung in Aluminium AL • blank, unbehandelt BL • eloxiert, naturfarben EL Ausführung Edelstahl nichtrostend, 1.4301 NI blank, unbehandelt BL Sägeschnittfläche entgratet blank, d.h. nicht oberflächenbehandelt Artikelnummer:GN 990-AL-V12-100-BL Gewicht:12 d1:- d2:9 l ±0.5:* s1:V 12 s2:9 w1:1.5 w2:1.5

AMETEK Specialty Metal Products bietet eine breite Auswahl an Präzisionsrohren, die von seinen Tochterunternehmen Fine Tubes in Großbritannien und Superior Tube in den USA gefertigt werden.

Available in a variety of sizes for HVAC, industrial, and condenser applications Our aluminum round tubes can be designed for many industrial and commercial uses, but are ideal for heat transfer applications where weight and space are design concerns, including in HVAC units, manifolds, evaporators, and condensers. Other applications include electrical conduits and general tubing for plumbing and construction. • Available in a variety of sizes for HVAC, industrial, and condenser applications • A wide array of aluminum alloys available • High-strength materials available for high-pressure applications • Internally scarfed round tube

Cranked Steel Extension Tubes 1/8” BSP Male both ends Part No. BRT6

Universal solution when different hose diameters have to be welded together. These step connectors are mostly used for accessory exhaust systems with larger diameters.

Drehteile nach Kundenzeichnung aus Edelstahl und Automatenstahl. Komplett mit Fräsung, Bohrung, Querbohrung u. Gewinde hergestellt, entgratet, inkl. Oberflächenbehandlung/-veredelung Komplett mit durchgehender Bohrung auf dem Drehautomaten hergestellt

Rippenrohre von N-thalpie GmbH sind Rohre, die mit dünnen Metallblechen, sogenannten „Rippen“, beschichtet sind, die der Grundrohrstruktur hinzugefügt werden. Diese Rippen vergrößern die Rohroberfläche und sorgen so für eine bessere Wärmeübertragung. Zur Optimierung der Wärmeübertragung von Flüssigkeit zu Gas oder von Gas zu Flüssigkeit werden Rippenrohre eingesetzt.

W & D FR 7 Sägewellen

Tube en inox 304 pour l'intérieur, diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 2 m Référence:0650.0200.4021 Matière:Inox 304 (Intérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur, hors milieu salin (bord de mer) et chloré (piscines) Diamètre tube:42,4 x 2 mm Longueur:1 mètre Section:Rond

Tube en inox 316, pour l'extérieur, diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 1 m. Ce tube inox est a utiliser en extérieur, pour fabriquer un poteau ou une main courante. Référence:0650.0100.6021 Matière:Inox 316 (Extérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur Diamètre tube:42,4 x 2 mm Longueur:1 mètre Section:Rond

Tube en inox 304 diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 5 m Référence:0650.0500.4021 Matière:Inox 304 (Intérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur, hors milieu salin (bord de mer) et chloré (piscines) Diamètre tube:42,4 x 2 mm Longueur:5 mètres Section:Rond

Tube en inox 304 diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 4 m Référence:0650.0400.4021 Matière:Inox 304 (Intérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur, hors milieu salin (bord de mer) et chloré (piscines) Diamètre tube:42,4 x 2 mm Longueur:4 mètres Section:Rond

Tube en inox 316, pour l'extérieur, diamètre 42,4 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 4 m Référence:0650.0400.6021 Matière:Inox 316 (Extérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur Diamètre tube:42,4 x 2 mm Longueur:4 mètres Section:Rond

Tube en inox 304 diamètre 48,3 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 3 m Référence:0660.0300.4021 Matière:Inox 304 (Intérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur, hors milieu salin (bord de mer) et chloré (piscines) Diamètre tube:42,4 x 2 mm Longueur:3 mètres Section:Rond

21Cr-6Ni-9Mn is a high manganese nitrogen strengthened, austenitic stainless steel. It combines high strength in the annealed condition, excellent resistance to oxidation at high temperatures as well as good resistance to lead oxide and a high level of corrosion resistance at ambient temperatures. The alloy can be fabricated and formed much the same as type 304 and 316, and is readily wieldable. It remains nonmagnetic after severe cold work. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):500 J/kg/°K Thermal conductivity:14 W/m/°K Thermal Expansion:16.7 μm/μm/°C Modulus Elasticity:19.6 Gpa Electrical Resistivity:73 μohm/cm Density:7.83 g/cm3

Superior Tube Co. supplies above industry standard quality high performance used in the manufacturing of liquid and gas chromatography. High Performance Liquid Chromatography High performance liquid chromatography (HPLC) is used to analyze chemicals in both research and industrial processing. It’s an application that requires precision tubing, which is resistant to high temperatures, pressures and corrosion. For many years, Superior Tube has supplied tubes made from corrosion resistant austenitic, stainless steel and nickel alloys for a range of HPLC equipment. The tubing is used for the manufacturing of the columns in chromatography machines. This application requires exceptional inside diameter condition and overall tube strength to withstand the pressure involved when pumping liquids or gases through the column in order to extract samples for chemical analysis. Please note that we have a minimum order value of £10,000.

Alloy 209 is a fully austenitic nitrogen strengthened stainless steel, having twice the yield strength and superior corrosion resistance at room temperature when compared to 316/316L or 317/317L stainless steels. This grade does not become magnetic when cooled to sub-zero temperatures or to a cold working process and has high resistance to sulphide stress corrosion cracking in both annealed and cold worked/ cold worked & aged form up to 30 HRc hardness. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):134 J/kg/°K Thermal conductivity:15.6 W/m/°K Thermal Expansion:16.2 μm/μm/°C Modulus Elasticity:199 Gpa Electrical Resistivity:82 μohm/cm Density:7.88 g/cm3

Alloys 304 (S30400) and 304L (S30403) stainless steels are variations of the 18 percent chromium – 8 percent nickel austenitic alloy, the most familiar and most frequently used alloy in the stainless steel family. High strength, excellent corrosion resistance and minimized carbon content make Alloy 304 and 304L Stainless Steels useful for applications where welding is required. Uses include architectural mouldings and trim, welded components of chemical, textile, paper, pharmaceutical and chemical industry processing equipment. Other advantages are its resistance to oxidation, excellent formability, ease of fabrication and cleaning, excellent strength to weight ratio and good toughness at cryogenic temperatures. For severely corrosive environments,the lower content of Type 304L is preferred because of its greater immunity to intergranular corrosion. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):500 J/kg/°K Thermal conductivity:16.2 W/m/°K Thermal Expansion:17.2 μm/μm/°C Modulus Elasticity:19.3 Gpa Electrical Resistivity:7.23 μohm/cm Density:8.0 g/cm3

316LN (UNS S31653) is a low-carbon, nitrogen-enhanced version of Type 316 molybdenum-bearing austenitic stainless steel. The Type 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304. They also offer higher creep, stress-rupture and tensile strength at elevated temperature. The nitrogen in Type 316LN adds additional resistance to sensitization in some circumstances. The nitrogen content of Type 316LN stainless steel also provides some solid solution hardening, raising its minimum specified yield strength compared to Type 316L stainless steel. Like Types 316 and 316L, the Type 316LN alloy also offers good resistance to general corrosion and pitting/crevice corrosion. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):485 J/kg/°K Thermal conductivity:16.3 W/m/°K Thermal Expansion:16.5 μm/μm/°C Modulus Elasticity:200 Gpa Electrical Resistivity:7.4 μohm/cm Density:7.99 g/cm3

UNS NO8904, commonly known as 904L, is a low carbon high alloy austenitic stainless steel which is widely used in applications where the corrosion properties of AISI 316L and AISI 317L are not adequate. The addition of copper to this grade gives it corrosion resistant properties superior to the conventional chrome nickel stainless steels, in particular to sulphuric, phosphoric and acetic acids. However, there is limited use with hydrochloric acids. It also has a high resistance to pitting in chloride solutions, a high resistance to both crevice and stress corrosion cracking. Alloy 904L performs better than other austenitic stainless steels due to the higher alloying of nickel and molybdenum. The grade is non-magnetic in all conditions and has excellent formability and weldability. The austenitic structure also gives this grade excellent toughness, even down to cryogenic temperatures. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):450 J/kg/°K Thermal conductivity:11.5 W/m/°K Thermal Expansion:15.8 μm/μm/°C Modulus Elasticity:190 Gpa Electrical Resistivity:9.52 μohm/cm Density:7.95 g/cm3

The high precision seamless tubes manufactured at Fine Tubes begin their journey as seamless tube extrusions, in a range of different sizes. This material is reduced in size several times until it gradually reaches the exact specifications our customers require. Each time we perform a reduction process, the tube needs to be cut, cleaned and heat treated before the next one can commence. Please note that we have a minimum order value of £10,000.