Produse pentru senzor xovis 3d (23)

The OPTISENS ORP 8590 is an ORP sensor for general water and wastewater applications. The sensor type is equipped with a platinum electrode, a large ceramic diaphragm and a temperature sensor (Pt100). It features a robust design with CPVC body material. The sensor is available with an attached cable up to 10 m / 33 ft. It can be installed directly into a pipe or tank with the 3⁄4 NPT (male) process connection. The ORP sensor operates with the MAC 100 or any suitable analytical transmitter.

The PLC UV sensors and VIS sensors serve as precision sensors for the measurement of UV irradiances and illuminances in systems with programmable logic controllers (PLCs). Spectral range, measuring range, operating voltage, and output signal can be selected to match the measurement task and the PLC. The integrated electronics generate a signal voltage that is transmitted with the low interference cable to the PLC. The built-in diffusers provide the required cosine correction. The sensors are calibrated with traceability to the PTB (Physikalisch Technische Bundesanstalt, the German national test authority); after being calibrated, they are shipped with a factory calibration certificate. Excellent long-term stability is achieved through the use of appropriate materials. Of course, a repair and spare parts service is available for many years. Our product range includes eight spectral ranges and three measuring ranges for the sensors. Measuring range:0 - 100 mW/cm² Dimensions:80 x 40 x 20 mm Weight:150 g Connector:5-pole M12 Humidity:< 80% Non-condensing

Miniatursensoren für Messbereiche bis 500 mm Messbereich:50/300/500 mm Auflösung:1 - 160 µm Linearität:± 0,08% MR...±23% MR Ausgang:0...10 V / 4...20 mA / RS485 Schutzklasse:IP67

Touchless, redundant NOVOHALL Heavy Duty Rotary Sensor. Designed for use in mobile und safety-related applications under extreme environmental conditions.

WiDPr-es est un capteur de pression différentielle sans fil, sans pile et auto-alimenté, développé par ESCOM Enhanced Solutions (ESCOM-ES). WiDPr-es tire sa propre énergie des sources d'énergie ambiantes, ce qui en fait une solution autoalimentée et sans entretien. Le capteur transmet les données sans fil à l'aide de technologies avancées telles que Wi-fi, LoRa et Bluetooth Low Energy (BLE), ce qui permet de contrôler la pression en temps réel dans les systèmes CVC, de surveiller l'état des filtres et d'autres filtres industriels, etc. Plus besoin de kilomètres de câbles, de câblage, de chemins de câbles, de tranchées, de conduits, de supports, ni de piles, de remplacement et d'élimination des piles, etc. - Sans fil, sans batterie, auto-alimenté, récolte d'énergie, IoT - Pression différentielle, surveillance des filtres HVAC - Bluetooth, LoRa, Wi-Fi - Plug & Forget, sans entretien, sans câble, sans batterie

The 3D-A5000 offers a variety of fields of view and measurement ranges to accommodate applications in the automotive, consumer goods, and logistics industries. Other features and benefits include: — Patent-pending 3D LightBurst technology enables rapid image acquisition — More than 1.5 million 3D data points detect fine features on parts — High Dynamic Range (HDR) mode captures scenes with high contrast — Powerful 3D tools in VisionPro solve challenging 3D applications — Factory-calibration delivers results in real-world units — Rugged IP65-rated housing provides protection in harsh factory environments

The optoNCDT 1320 is a new laser triangulation sensor with compact size for displacement, distance and position measurements. Due to its extremely compact size including integrated controller, the sensor can also be integrated into restricted installation space. Its low weight make the optoNCDT 1320 ideally suitable for applications where high accelerations occur, e.g., on the robot arm or in pick-and-place machines. The optoNCDT 1320 offers high accuracy and adjustable measuring rates up to 4kHz. The Active Surface Compensation (ASC) provides stable distance signal control regardless of target color or brightness. Very small objects can be detected reliably due to the small measurement spot size.

Visionerf's Custom solutions offer a tailored approach to meet the unique needs of each client. Whether it's developing a new product or customizing an existing one, Visionerf works closely with clients to co-develop solutions that perfectly fit their requirements. This bespoke service ensures that every solution is optimized for the client's specific applications, providing maximum efficiency and effectiveness. The Custom solutions service is ideal for businesses that require specialized equipment or systems that are not readily available on the market. By collaborating with Visionerf, clients can benefit from the company's extensive expertise and experience in industrial vision systems, ensuring that their custom solution is of the highest quality and performance. This service not only enhances the client's operations but also provides a significant return on investment by optimizing processes and improving productivity.

L'Oxymax COS61D est un capteur d'oxygène numérique hautes performances qui permet une mesure rapide, précise et sans dérive. Il facilite votre process grâce à un faible besoin de maintenance, une disponibilité élevée et une utilisation simple. La couche fluorescente stable à long terme du capteur est sensible exclusivement à l'oxygène (insensible aux parasites), ce qui assure une mesure toujours fiable. Grâce à la technologie numérique Memosens, l'Oxymax COS61D combine intégrité maximale du process et des données et fonctionnement simple. Il facilite l'étalonnage en laboratoire. Principe de mesure:Capteur d'oxygène dissous Application:Aeration tank, river monitoring, water treatment, fish farming. Caractéristique:Digital, optical (luminescence) dissolved oxygen measurement. No flow needed; measurement possible i Gamme de mesure:0mg/l ... 20mg/l 0%SAT ... 200%SAT 0 ... 400hPa Principe de mesure:Oxygen-sensitive molecules (marker) are integrated in an optical active layer (fluorescence layer). Design:- Calibration data saved in sensor. High degree of EMC protection. Matériau:Sensor body : stainless steel 1.4571Membrane cap : POM Dimension:Diameter : 40mm (1.56inch)Length : 220mm (8.58inch) Température de process:-5 °C ... 55 °C ( 23 - 131 °F) Pression de process:max. 10bar (145psi)

The vibration sensors VIBRO-M are intended to detect deliberate destruction of metal grids or metal shields. The alarm is generated in the case of sawing, drilling or multiple beats. Vibration sensors VIBRO-M are intended for detection of destruction of physical fences. The vibration sensor VIBRO-M used for the protection of window, door or gate grids. If the surface of detection allows, it is possible in some cases to use the sensor to protect two grids welded by the metal rod, Like this we decrease expenses. Vandal-proof housing makes it impossible to dismount the sensor without opening the cover. Under the cover there is the tamper. Easy design and reliable sensors are well protected from climatic effects. Protected surface:10 m2 Supply Voltage:6…30 V Current consumption:0,002 A Detection probability:0.98 Operational temperature:minus 45...+65 °C Protection Level:IP-65 Alarm output:Relay contacts Dimensions:90x58x65 mm Weight:0,25 kg

Das Sensorsystem ist als Komponente für den Einsatz beispielsweise in Windkraftanlagen zur Messung und Auswertung von Schwingungen im Turmkopf vorgesehen. Erfassung von dynamischen Beschleunigungen mittels MEMS-Sensoren mit anschließender Digitalisierung durch Controller. Das Gerät besteht aus einem Beschleunigungssensor, einer Controllereinheit und drei Arten von Ausgangsschnittstellen. Hauptmerkmal sind zwei Safety-Schaltkontakte (potential- frei), die z.B. in der Sicherheitskette angewendet werden können, um eine Sicherheitsabschaltung bei zu hohen Beschleunigungswerten vorzunehmen. Die Datenausgabe erfolgt über die CANopen Schnittstelle. Es kann das Standard- oder das Safetyprofil gewählt werden. Zusätzlich gibt es zwei Analogausgänge 4 ... 20 mA, die wahlweise zwei der drei Messachsen zugeordnet werden können. Durch die hohe Widerstandsfähigkeit gegen Vibration und Schock ist der Sensor für den Einsatz in Bereichen mit rauen Umweltbedingungen geeignet. Schnittstelle:Analog,CANopen,CANopen Safety,Relais Gehäusematerial:Aluminium Druckguss ADC 12 Besonderes Merkmal:SIL2/PLd Bauform:115mm, 120mm Anzahl Schaltausgänge:0, 1, 2 Messbereich:2g = ca. 20m/s²

Diese Sensoren arbeiten mit einer hochauflösenden CMOS-Zeile und DSP-Technologie und ermitteln den Abstand über eine Winkelmessung. • CMOS-Zeile • Industrial Ethernet • Material-, farb- und helligkeitsunabhängiger Messwert • Webserver und graphisches Display für einfache Bedienung Diese Sensoren arbeiten mit einer hochauflösenden CMOS-Zeile und DSP-Technologie und ermitteln den Abstand über eine Winkelmessung. Sensoren mit Industrial Ethernet machen analoge und digitale Eingangskarten an der Steuerung überflüssig, da alle Service- und Messdaten dort in Echtzeit und ohne Umwandlung gelesen, analysiert und verarbeitet werden. Power-over-Ethernet vereint Datentransfer und Stromversorgung in einem Kabel und reduziert so den Verkabelungsaufwand.

The xiC camera line is highly versatile with a wide range of the most modern global shutter CMOS sensors up to 24.5 Mpix in resolution. The ultra-compact form factor, barely larger than the C-mount, combined with micro-B, type-C, and flex ribbon connectors make these cameras the perfect fit for various applications, especially for automation and embedded vision systems. For the same form-factor and sensor options, but increased bandwidth of 10 Gbit/s resulting in doubled frame rates, there is the xiX family. - Compact cameras with Sony Pregius™ sensors - 26 x 26 x 33 mm - Fast speed from 2.3 Mpix at 165 FPS to 12 Mpix at 31 FPS - Cool economy - Low power consumption with under 3 watts

Max. resolution 10 μm. Repeat accuracy 0.01 mm. SSI, RS485 output circuits. Reading distance ≤2 mm. Max. measuring length 20480 mm.

L'OPTISENS ORP 8590 est une sonde de Redox conçue pour les applications générales eau et eaux usées. Le type de sonde est équipé d'une électrode en platine, d'une grande membrane céramique et d'une sonde de température (Pt100). Il s'agit d'une version robuste avec un corps en CPVC. La sonde est disponible avec un câble moulé jusqu'à 10 m / 33 ft. Elle peut être installée directement sur une canalisation ou dans un réservoir avec un raccordement process 3⁄4 NPT (mâle). La sonde de Redox fonctionne avec le MAC 100 ou tout autre convertisseur adapté.

Performance Sensoren - zuverlässige Lösungen für die Fabrikautomation Messbereich:40 - 500 mm Auflösung:4 - 670 µm Linearität:± 0,15% MR...± 0,40 % MR Ausgang:0...10 V / 4...20 Ma Schutzklasse:IP67

Compact, non-contacting NOVOHALL rotary sensor in redundant version for automotive applications.

On requst: Very cost-effective potentiometric rotary sensor with integrated plug

The new generation of Micro-Epsilon’s 3D sensors impresses with high accuracy during measurement and assessment of components and surfaces. The surfaceCONTROL and reflectCONTROL inspection systems from Micro-Epsilon are intended for matt and shiny surfaces respectively. The 3D snapshots are recorded in a short time and provide detailed 3D point clouds. These 3D sensors are used, e.g., for geometric component testing, position determination, presence checks and the measurement of flatness or planarity. Thanks to their high performance, the sensors are used for inline applications, on robots and also for offline inspection.

Turbimax CUS52D es un sensor inteligente con calidad de laboratorio que funciona sin supervisión en todos los puntos de medición de sus aplicaciones de producción de agua. Gracias a su diseño higiénico autolimpiante, puede montarlo directamente en su sistema de tuberías. De este modo, se ahorrará extensas instalaciones de bypass y evitará pérdidas de producto. Gracias a la tecnología digital Memosens, el equipo Turbimax CUS52D combina una máxima integridad de proceso y datos con una fácil utilización. Permite la calibración en laboratorio y simplifica las tareas de mantenimiento preventivo. Measuring Principle:Single beam scattered light Application:Turbiedad en agua potable - todas las aplicaciones; turbiedad en agua de proceso - todas las aplicac Installation:En línea in situ, sensor con abrazadera,; celda de flujo, sensor con abrazadera,; Retraíble, sensor Measurement range:0.000 .. 4000FNU/NTU Measuring principle:Sensor de turbidez nefelométrica (dispersión; 90°) conforme a ISO7027 Design:Sensor, 40 mm, acero inoxidable Material:acero inoxidable 1.4404, zafiro, EPDM Dimension:Diseño de 40 mm, versión de pinza higiénica; 320 x 40 mm Process temperature:-20 .. 85°C Process pressure:0.5 .. 10 bares

The Cirrus3d scanner is a state-of-the-art tool designed to revolutionize the scanning process in industrial settings. This scanner is equipped with advanced stereovision technology, allowing it to capture detailed 3D point clouds of the working scene. The scanner's ability to operate in challenging environments, such as those with varying light conditions or high levels of dust, makes it an invaluable asset for industries that require precise and reliable scanning solutions. With the Cirrus3d scanner, users can define the parameters of the working scene graphically, ensuring that the volume of work and the density of points in the point cloud are tailored to their specific needs. This flexibility, combined with the scanner's robust design, ensures that it can handle a wide range of applications, from quality control to robot guidance, providing users with a comprehensive solution for their scanning needs.

La gamme de Cirrus3D scanner allie la flexibilité à la fiabilité par son aspect compact, sa légèreté et sa haute résolution. pour une rapidité et une précision incomparable. Facile à intégrer dans une installation en production grâce à sa calibration réalisée en usine, il est compatible avec tous les logiciels de traitement d'images du marché. Une innovation dans les gammes de caméras 3D compactes, son balayage laser associé à deux caméras haut de gamme, lui permet de scanner des pièces avec une excellente résolution, même sur les pièces brillantes.

The Cirrus3d linear is an innovative scanning solution designed to provide linear scanning capabilities for industrial applications. This product is ideal for environments where continuous scanning along a linear path is required, such as conveyor systems or production lines. The Cirrus3d linear is engineered to deliver high precision and reliability, even in challenging conditions, ensuring that every scan is accurate and consistent. This scanner is particularly beneficial for industries that require real-time monitoring and inspection of products as they move along a production line. Its advanced technology allows for seamless integration into existing systems, providing a robust solution that enhances productivity and quality control. With the Cirrus3d linear, businesses can achieve greater efficiency and accuracy in their scanning processes, making it a valuable addition to any industrial setup.