Produse pentru senzor xovis 3d (14)

The OPTISENS ORP 8590 is an ORP sensor for general water and wastewater applications. The sensor type is equipped with a platinum electrode, a large ceramic diaphragm and a temperature sensor (Pt100). It features a robust design with CPVC body material. The sensor is available with an attached cable up to 10 m / 33 ft. It can be installed directly into a pipe or tank with the 3⁄4 NPT (male) process connection. The ORP sensor operates with the MAC 100 or any suitable analytical transmitter.

The PLC UV sensors and VIS sensors serve as precision sensors for the measurement of UV irradiances and illuminances in systems with programmable logic controllers (PLCs). Spectral range, measuring range, operating voltage, and output signal can be selected to match the measurement task and the PLC. The integrated electronics generate a signal voltage that is transmitted with the low interference cable to the PLC. The built-in diffusers provide the required cosine correction. The sensors are calibrated with traceability to the PTB (Physikalisch Technische Bundesanstalt, the German national test authority); after being calibrated, they are shipped with a factory calibration certificate. Excellent long-term stability is achieved through the use of appropriate materials. Of course, a repair and spare parts service is available for many years. Our product range includes eight spectral ranges and three measuring ranges for the sensors. Measuring range:0 - 100 mW/cm² Dimensions:80 x 40 x 20 mm Weight:150 g Connector:5-pole M12 Humidity:< 80% Non-condensing

Miniatursensoren für Messbereiche bis 500 mm Messbereich:50/300/500 mm Auflösung:1 - 160 µm Linearität:± 0,08% MR...±23% MR Ausgang:0...10 V / 4...20 mA / RS485 Schutzklasse:IP67

Touchless, redundant NOVOHALL Heavy Duty Rotary Sensor. Designed for use in mobile und safety-related applications under extreme environmental conditions.

The 3D-A5000 offers a variety of fields of view and measurement ranges to accommodate applications in the automotive, consumer goods, and logistics industries. Other features and benefits include: — Patent-pending 3D LightBurst technology enables rapid image acquisition — More than 1.5 million 3D data points detect fine features on parts — High Dynamic Range (HDR) mode captures scenes with high contrast — Powerful 3D tools in VisionPro solve challenging 3D applications — Factory-calibration delivers results in real-world units — Rugged IP65-rated housing provides protection in harsh factory environments

The optoNCDT 1320 is a new laser triangulation sensor with compact size for displacement, distance and position measurements. Due to its extremely compact size including integrated controller, the sensor can also be integrated into restricted installation space. Its low weight make the optoNCDT 1320 ideally suitable for applications where high accelerations occur, e.g., on the robot arm or in pick-and-place machines. The optoNCDT 1320 offers high accuracy and adjustable measuring rates up to 4kHz. The Active Surface Compensation (ASC) provides stable distance signal control regardless of target color or brightness. Very small objects can be detected reliably due to the small measurement spot size.

Das Sensorsystem ist als Komponente für den Einsatz beispielsweise in Windkraftanlagen zur Messung und Auswertung von Schwingungen im Turmkopf vorgesehen. Erfassung von dynamischen Beschleunigungen mittels MEMS-Sensoren mit anschließender Digitalisierung durch Controller. Das Gerät besteht aus einem Beschleunigungssensor, einer Controllereinheit und drei Arten von Ausgangsschnittstellen. Hauptmerkmal sind zwei Safety-Schaltkontakte (potential- frei), die z.B. in der Sicherheitskette angewendet werden können, um eine Sicherheitsabschaltung bei zu hohen Beschleunigungswerten vorzunehmen. Die Datenausgabe erfolgt über die CANopen Schnittstelle. Es kann das Standard- oder das Safetyprofil gewählt werden. Zusätzlich gibt es zwei Analogausgänge 4 ... 20 mA, die wahlweise zwei der drei Messachsen zugeordnet werden können. Durch die hohe Widerstandsfähigkeit gegen Vibration und Schock ist der Sensor für den Einsatz in Bereichen mit rauen Umweltbedingungen geeignet. Schnittstelle:Analog,CANopen,CANopen Safety,Relais Gehäusematerial:Aluminium Druckguss ADC 12 Besonderes Merkmal:SIL2/PLd Bauform:115mm, 120mm Anzahl Schaltausgänge:0, 1, 2 Messbereich:2g = ca. 20m/s²

The xiC camera line is highly versatile with a wide range of the most modern global shutter CMOS sensors up to 24.5 Mpix in resolution. The ultra-compact form factor, barely larger than the C-mount, combined with micro-B, type-C, and flex ribbon connectors make these cameras the perfect fit for various applications, especially for automation and embedded vision systems. For the same form-factor and sensor options, but increased bandwidth of 10 Gbit/s resulting in doubled frame rates, there is the xiX family. - Compact cameras with Sony Pregius™ sensors - 26 x 26 x 33 mm - Fast speed from 2.3 Mpix at 165 FPS to 12 Mpix at 31 FPS - Cool economy - Low power consumption with under 3 watts

Max. resolution 10 μm. Repeat accuracy 0.01 mm. SSI, RS485 output circuits. Reading distance ≤2 mm. Max. measuring length 20480 mm.

L'OPTISENS ORP 8590 est une sonde de Redox conçue pour les applications générales eau et eaux usées. Le type de sonde est équipé d'une électrode en platine, d'une grande membrane céramique et d'une sonde de température (Pt100). Il s'agit d'une version robuste avec un corps en CPVC. La sonde est disponible avec un câble moulé jusqu'à 10 m / 33 ft. Elle peut être installée directement sur une canalisation ou dans un réservoir avec un raccordement process 3⁄4 NPT (mâle). La sonde de Redox fonctionne avec le MAC 100 ou tout autre convertisseur adapté.

Performance Sensoren - zuverlässige Lösungen für die Fabrikautomation Messbereich:40 - 500 mm Auflösung:4 - 670 µm Linearität:± 0,15% MR...± 0,40 % MR Ausgang:0...10 V / 4...20 Ma Schutzklasse:IP67

Compact, non-contacting NOVOHALL rotary sensor in redundant version for automotive applications.

On requst: Very cost-effective potentiometric rotary sensor with integrated plug

The new generation of Micro-Epsilon’s 3D sensors impresses with high accuracy during measurement and assessment of components and surfaces. The surfaceCONTROL and reflectCONTROL inspection systems from Micro-Epsilon are intended for matt and shiny surfaces respectively. The 3D snapshots are recorded in a short time and provide detailed 3D point clouds. These 3D sensors are used, e.g., for geometric component testing, position determination, presence checks and the measurement of flatness or planarity. Thanks to their high performance, the sensors are used for inline applications, on robots and also for offline inspection.