Produse pentru săgeți cu oțel inoxidabil (10883)

Internal Retaining Rings For Type J Bore (Inner Rings) Stainless Steel - DIN 472

M6 x 85mm Partially Threaded Hex Head Bolt Stainless Steel A2 - DIN 931. A wide range of Stainless Steel fasteners including Hexagon Head High Tensile Bolts Stainless Steel DIN 931 at cost-effective price available from A2Z Fasteners.

SPECIFICHE TECNICHE - Riferimento : 007236 - Marchio Pierre Guerin - Serbatoio a fondo piatto su piedini - Capacità : 190 HL - Materiale : 304 L - Finitura interna : laminato a freddo - Finitura esterna : spazzolato Tetto - Camino centrale - Portello Ø 500 in acciaio inox con morsetti - Entrata e uscita della serpentina interna - Raccordo per sensore di temperatura - 1 raccordo da 50 al camino, filettato internamente e esternamente - Supporto per passerella Fondo - Completamente drenato, valvola a sfera Ø 50 in acciaio inox - Piedi con viti e piastre di regolazione - Circuito di raffreddamento sul fondo del serbatoio Guscio - Porta in acciaio inox 410 x 530 con apertura esterna - Valvola a sfera in acciaio inox Ø 50 per il passaggio di aria pulita - Assaggiatore in acciaio inox - 2 serpentine in acciaio inox all'interno - 6 giri di circuito del mantello - 1 livello con ritorno nel camino DIMENSIONI - Diametro: 2785 mm - Altezza complessiva: circa 4500 mm

Rohrleitungssystem aus hochwertigen NiroSan®-Pressfittings (Edelstahlfittings) mit einer Formteildichtung aus EPDM (Ethylen-Propylen-Dien-Kautschuk) und NiroSan®-Edelstahl-Rohren nach DVGW-Arbeitsblatt GW 541 bzw. DIN EN 10312. Alle NiroSan®-Edelstahlfittings werden aus den Werkstoffen 1.4404 / AISI 316L (Formteile aus Edelstahl) und 1.4408 (Gewindeteile, Edelstahl-Feinguss) gefertigt. Der Werkstoff enthält mindestens 2,3 % Molybdän und weist einen geringeren Kohlenstoffanteil als der konventionelle Werkstoff 1.4401 auf. Damit ist er nicht nur gleichwertig zu diesem Edelstahl, sondern überzeugt durch seine deutlich höhere Korrosionsresistenz. Das NiroSan®-Presssystem ist geprüft nach den DVGW-Arbeitsblättern GW 541 und W 534 und zugelassen von DVGW, ÖVGW, SVGW sowie allen namhaften europäischen Zertifizierungsstellen. Die NiroSan®-Serie 9000 ist auch in einer speziellen LABS*- und silikonfreien Ausführung mit EPDM-Dichtring und in einer separaten Verpackung erhältlich. O ring:EPDM Operating pressure:16 bar Operating temperature:-30 - 120 °C Dimension:15 - 108 mm

Construction inox 304L. Pour flexible de 15m en 1/2 pouce. Garantie 5 ans. Entrée FBSP 1/2 et sortie MBSP 1/2. L’enrouleur permet un stockage parfait du flexible et augmente ainsi sa durée de vie. Pas de risque d’écrasement ou de pincement. Le flexible ne traîne pas au sol, pas de risque de chute, pas de zone de rétention. Le flexible reste en tension durant l’utilisation et se rembobine automatiquement. Blocage de la rotation par cliquet téflon. Fixation murale, sur support au sol ou au plafond. Bras articulé permettant d’orienter le flexible.

Barre ronde inox Exécution:Laminé à chaud Dimensions:Ø 10 à 80 mm

Matériaux : Manche ennois de Stamina, deux mitres et lame en inox Dimensions : Catégorie : Couteau de poche de 9 cm Laguiole Tradition Référence :7322 CP1 Pays de Fabrication : France Nos produits sont garantis 10 ans contre tout vice de fabrication dans le cadre d'un usage normal. L'usure des pièces due au temps n'entre pas dans la garantie ainsi qu'une mauvaise utilisation ou une chute. Les couteaux devront nous être retournés avec leur preuve d'achat. Pour éviter des envois inutiles vous pouvez nous transmettre une photo du produit à réparer à contact@vauzy-chassangue.com, nous vous soumettrons un devis.

Positioning system with protection class IP 65 for damp area applications The PSS 31x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes with hygienic design. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. Two bus connections are available for looping the bus signal (not for IO-Link). Set-up mode or manual positioning permits the connection of jog keys (optional, not for IO-Link). Nominal torque / Nominal rated speed:1 .. 5 Nm / 210 .. 40 rpm Protection class:IP 65 Material:Stainless steel housing Design:Longitudinal construction, space-saving, compact design Output shaft:8 mm hollow shaft with adjustable collar or 8 mm solid shaft Data interface:CANopen, PROFIBUS DP, DeviceNet, Modbus, Sercos, EtherCAT, PROFINET, EtherNet/IP, POWERLINK, IO-Link Special Features:Address switches, 2nd databus connection für ring wiring (not for IO-Link) Options for IE-Buses (standard for IO-Link):Wiring via Hub Options:Jog Keys, STO, NRTL

-Material :Stainless steel -Neck length:45mm -Style:England -Handcraft:Welding -Finish:Polishing -Features:with brass rowels and angled buttons Material :Stainless steel Neck length:45mm Style:England Handcraft:Welding Finish:Polishing Features:with brass rowels and angled buttons

Modern look through minimal attachment points Suitable for glass, wood, metal, plastic or stone panels Rustproof due to stainless steel AISI 304 Material:Stainless steel AISI 304 Diameter:Ø 65 mm Glass thickness:16 mm Glass drilling:Ø 45 mm / y = 65 mm Mounting:partial thread rod M16 / V2A Seal:EPDM

HAND WASHING SINK

M.E.G.A. S.p.A. has always stood out for its multitechnological capabilities and highperformance manufacturing, efficiently and flexibly carrying out the entire production cycle of each branch fitting, starting from forging through to the final testing phase and any inherent certification. Among the branch outlet fittings, the socalled MEGALETS stand out, selfreinforcing branch outlets with a traditional 90° conformation to the main pipeline. Depending on the different configurations, they are divided into LATROMEGALET that can be installed to obtain a branch outlet with an angle other than 90°. ELBOWMEGALET that can be mounted on a curve. INSERT MEGALET that can be welded directly inside the main pipe. All these types can be supplied with butt weld (BW), socketweld, threaded and also flanged ends.

Buy here tactile guiding systems for the blind made of steal, metal, plastic and concrete, e.g. studs and strips

Roulement à bille miniature en inox. Marque Japonaise EZO. Diamètre interieur: 12mm Diamètre extérieur: 24mm Largeur: 6mm

The use of the sealed rivet is recommended when the liquid seal is needed through the thicknesses to be fastened. Due to this particular feature, it is extremely important the precision of the hole and the finish of the surfaces. Otherwise it is recommended to put a gasket under the rivet head, (only for the blind rivet with cylindrical head).chiuso MATERIALS: BODY: ALMG5 (EN AW 5019) NAIL: WHITE ZINC PLATED STEEL WITH CHROME III

SUPRASAN HYPOCHLORITE è un prodotto disinfettante biocida, ad azione virucida, battericida e fungicida per superfici dure, comprese le superfici a contatto con alimenti.

Makro Teknik framings have wide range of uses in different industries. Used as assembly and support component in exterior hanging systems, electricity installations. Can be used single or attached with other framings. Supported with channel assembly accessories.

Runde Domdeckel für sterile Anwendungen Drucklose Domdeckel Profildichtung - Mannlöcher und Domdeckel

MOSO® Winkelkonsolanker WK-D mit allgemeiner bauaufsichtlicher Zulassung Z-21.8-1892 Der MOSO® Konsolanker WK-D mit justierbarer Druckschraube ist die perfekte Lösung für Abfangungen mit durchlaufender Winkelschiene. Mit der Justierschraube lassen sich Betonunebenheiten einfach ausgleichen. Höhenjustierung:+/- 25 mm Laststufen:3,5 - 25,0 kN Material:Nichtrostender Edelstahl, Korrosionsbeständigkeitsklasse (CRC) III Nachweis:Tragankerkopf nach DIBt-Zulassung Z-21.8-1892 Typenprüfung bzw. statische Berechnung Wandabstände:20 - 370 mm, größer auf Anfrage

Discover precision, quality and maximum freedom in planning: With its stainless steel frame and the high IP65 protection the CWL-I is perfectly suitable for demanding industrial requirements. This verifiable checkweigher or catchweigher reliably provides precise results at high loads. Realize the optimal solution for your needs with a large model variety and numerous options. Easily integrate the CWL-I in your internal conveyor system whether it is a sorting application, infeed line or a shipping system. Efficiently configure and parameterize your solution with the included Bizerba Configuration Tool software. Weighing ranges:From 15 kg to 60 kg; up to 3,200 d, verifiable Display:Metrology display in control cabinet Conveying speed:Up to 1.0 m/s (verifiable) Belt dimensions:Conveyor length up to 1,600 mm Conveyor width up to 1,000 mm Transport height:450 - 925 mm IP rating:IP65 Ambient temperature:0 °C to +40 °C

TECHNICAL SPECIFICATIONS -M3-M16 - M3-M30 tapping capacity -220V high efficiency, intelligent servo motor -Manual or Automatic operation possibilty -24V operating voltage for operator safety -Robust body structure -Digital torque setting -Digital forward and reverse speed control -Tapping by chip removal -Acrobatic arm mechanism that can xtend up to 1100 - 1200mm -Ability to tap vertically, horizontally and angle -Quick and easy tool changing -Clamps preventing tool breakage We offer practical use and competitive price advantage in metal processing.

Bossong injected anchors with sock and Presstec grout with TBOS bars. Stainless steel threaded bars. Couplers, turnbuckers, nuts, standard end and architectural end plates.

Stainless steel AISI 304 Strong cast iron wok Ø 280 mm Special design of 1+1 pipe burners to get a higher performance Top with splashback of 400 mm Table Top thickness 5 mm Cold water faucet with integrated tap in the control panel for easy use Cooling water overflow system which will flows above the wok into the water drain PRO. CODE:WK-1+1 WOK BURNER (S):1 SOUP BURNER (S):1 B(MM):1000 D(MM):850 H(MM):1100 KW:36.7

Standard stands are designed for mounting blocked mailboxes from one to four blocks. There may be two to ten places in one mailbox unit. One unit stand can also be used for individual, individual mailboxes. The stand is made of black metal. Before painting, we cover the components of the rack with powdered zinc primer for black steel and then we paint the mailboxes with powder polyester paints. Mailbox stands can also be made of stainless steel.

• Totem Distributeur de Solutions Hydro-Alcooliques, Manuel, Inox • Fabriqué en France. • Permet une distribution de solutions hydro-alcooliques avec le pied via une pédale manuelle. • Très pratique, peut se positionné partout. • Dimensions du Totem : - Hauteur : 995,0 mm - Diamètre du cylindre : 114,0 mm - Diamètre du socle : 300,0 mm (épaisseur : 5,0 mm) • Les dimensions ont été spécialement adaptées pour un distribution facilité aux personnes adultes. Poids:10 kg Dimensions:110 × 40 × 40 cm Hauteur:995,0 mm Diamètre du cylindre:114,0 mm Diamètre du socle:300,0 mm (épaisseur : 5,0 mm) Coloris:Acier Inoxydable Entretien:Rechargeable, Démontable et Nettoyable

MERKEZİ VE AYRI ISITMA SİSTEMLERİ İÇİN HER TÜRLÜ EBATLARDA BOYLER/AKÜMİLASYON TANKLARI

Fine Tubes is a leading supplier of aerospace hydraulic tubes where they are deployed in the airframes and engines of both commercial and military aircraft. Our thin wall tubes are used to actuate flight control surfaces that bear heavy aerodynamic loads such as flaps and slats. They are also crucial components in aircraft landing gear and brake systems. Trusted by Major Airframe Manufacturers Fine Tubes is one of only a handful of tube mills worldwide qualified to produce the titanium tubing used for the 5,000psi high-pressure hydraulic systems of the Airbus family. Titanium provides a weight saving of 42% compared to the equivalent quantity of traditional stainless steel tubing. Please note that we have a minimum order value of £10,000.

Garde-corps Avec Verre Et Câbles - GALERIES

Angles de rotation disponibles jusqu’à 240° Réglage des butées de fin de course +/ 10° Pression d’alimentation jusque 250 barg Montage suivant ISO 5211 Accessoires suivant VDI/VDE 3845 ATEX II 2G/D Disponibles avec micro centrale hydraulique Corps, cylindres hydrauliques et brides en aluminium 6082 T6 Carters ressorts en aluminium AS7G06Y33 (DIN 3.2384) Pignon et crémaillère en acier inoxydable DIN 1.4057 QT900 Angle de rotation maximum:110° (standard) Fluide d’alimentation:huile hydraulique (eau douce ou eau de mer sur demande) Autres matériaux de fabrication:acier, acier inoxydable

Miscelatore lavello inox con canna girevole. ART:8088 FINITURE:Cromo - Chrome