Produse pentru pompe de irigare (16)

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Ø Sortie:1" Référence:000091

Bewässerungsautomaten von Kärcher steuern Ihr Bewässerungssystem genau nach Plan.

Hervorragende Belastbarkeit und optimale Servicefreundlichkeit: Das robuste Design der PERIPRO® Schlauchpumpe in Industrieausführung von NETZSCH gewährleistet eine benutzerfreundliche Förderung abrasiver und aggressiver Medien in einer Vielzahl von Anwendungen. Dank ihrer hochbelastbaren Bauweise eignet sich die Schlauchpumpe ideal für Fördergüter mit einem Feststoff- und Faseranteil von bis zu 70 Prozent. Dadurch erfüllt die strapazierfähige PERIPRO® Industrieausführung die Anforderungen vieler industrieller Anwendungen. Mit unseren Schlauchpumpen können Sie selbst abrasive und aggressive Medien wie Schlämme, Keramikschlicker oder Mörtel sicher und effizient transportieren. Darüber hinaus überzeugt die Schlauchpumpe durch ihre außergewöhnliche Saugleistung, kombiniert mit hoher Wartungsfreundlichkeit. Dies wird erreicht durch den großen Durchmesser der Rollen, den geringen Schmiermittelbedarf und die minimale Anzahl an Verschleißteilen.

Pompe con girante monocanale aperta indicate per usi agricoli / civili / industriali per il pompaggio di acque pulite, poco sporche, fognature, fognature pesanti o liquidi similari, anche con parti solide in sospensione del diametro massimo consentito dalla girante. Portate: 0 – 2680 lt/min Prevalenze: 0 – 32 mt Potenze: 3 – 7,5 Kw Coperchio motore, cassa motore, corpo pompa, girante: ghisa G20 Albero motore: acciaio inox Aisi 420 Cavo elettrico: 10 mt in H07RN-F 2 o 4 poli, lubrificato ad olio atossico, classe d’isolamento F, grado di protezione IP68 Portate:0 – 2680 lt/min Prevalenze:0 – 32 mt Potenze:3 – 7,5 Kw Albero motore:acciaio inox Aisi 420 Cavo elettrico:10 mt in H07RN-F

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Ø Output:1" Reference:000088

Utilisations : Agriculture, jardinage, industrie, usage domestique et autres usages. Données techniques : Fonctionnement automatique • Aspiration jusqu'à 9 m • Température maximale du fluide 40 ºC • Température ambiante maximale 40 ºC. Composition : Electropompe centrifuge modèle XJM 100 L • Raccord automatique • Autoclave à membrane EPDM certifié eau potable • Pressostat • Manomètre • Fiche 5 voies • Câble d'alimentation 2,5 m • Fiche mâle avec terre. Les ensembles de 40 L comprennent un tube en treillis d'acier flexible pliable. équitation:1 CV sur 5 Ø Sortie:1" Référence:477.1104095

Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel. USES: Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Ø Output:1" Reference:000085

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel. Ø Output:1 1/4" Reference:275.0001 Pumped liquid:clean water. Maximum liquid temperature:35ºC. Maximum sand content:60g/m3. Power cable:20m neoprene. Immersion depth:20 m. Maximum number of starts per hour:30 Power:1.3 Kw. Motor:8.4 A. Condenser:30uF. DNC:1 ¼". Head:37 to 85m. Maximum flow:4.5 m3/h.

Livré partiellement assemblé, autoclavé dans un emballage séparé Utilisations : Agriculture, jardinage, industrie, usage domestique et autres usages. Données techniques : Fonctionnement automatique • Aspiration jusqu'à 9 m • Température maximale du fluide 40 ºC • Température ambiante maximale 40 ºC. Composition : Pompe électrique centrifuge • Raccord automatique • Autoclave à membrane EPDM certifié eau potable • Pressostat • Manomètre • Fiche 3 voies • Câble d'alimentation 2,5 m • Fiche mâle avec terre. Les ensembles de 40 L comprennent un tube en treillis d'acier flexible pliable. équitation:1 CV sur 5 Ø Sortie:1" Référence:477.1104122

Agriculture Jardinage Industrie Usage domestique et à d'autres fins. Données techniques: opération automatique Aspiration jusqu'à 9 m Température maximale du fluide 40°C Température ambiante maximale 40ºC. Constitution: Pompe électrique centrifuge modèle XJM 100 L matériel automatique Autoclave avec membrane EPDM certifié pour l'eau potable Pressostat Manomètre enregistrer 5 façons Câble d'alimentation de 2,5 mètres Fiche mâle avec terre. équitation:1 a 5cv Ø Sortie:1" Référence:477.cjh999

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Ø Output:1" Reference:000091

Set de pression Termar QB60 25 M Inclus: pompe électrique Autoclave 25L Pressostat Manomètre Enregistrez 5 voies. Remarque : Les composants de ces ensembles sont fournis dans des emballages séparés. Ensemble de pression Termar avec autoclave de 25 volts:240 HP:0,5 large:2.6 Sortie:1" MCA:3-35 G/H:21h00-300 Référence:477.1104000

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel. Ø Output:1 1/4" Reference:275.000097 Pumped liquid:clean water. Maximum liquid temperature:35ºC. Maximum sand content:60g/m3. Power cable:20m neoprene. Immersion depth:20 m. Maximum number of starts per hour:30 Power:0.6Kw. Motor:4.1 A. Condenser:16uF. DNC:1 ¼". Head:15 to 47m. Maximum flow:4.5 m3/h.

Pompe con girante VORTEX indicate per usi agricoli / civili / industriali per il pompaggio di acque pulite, poco sporche, fognature, fognature pesanti o liquidi similari, anche con parti solide in sospensione del diametro massimo consentito dalla girante. Portate: 0 – 2010 lt/min Prevalenze: 0 – 24 mt Potenze: 4 – 7,5 Kw Coperchio motore, cassa motore, corpo pompa, girante: ghisa G20 Albero motore: acciaio inox Aisi 420 Cavo elettrico: 10 mt in H07RN-F 2 o 4 poli, lubrificato ad olio atossico, classe d’isolamento F, grado di protezione IP68 Portate:0 – 2010 lt/min Prevalenze:0 – 24 mt Potenze:4 – 7,5 Kw Albero motore:acciaio inox Aisi 420 Cavo elettrico:10 mt in H07RN-F

Pompe progettate specificamente per essere usate in piscine e sistemi di pu- lizia con cestino per il filtro, disponibili in 3 dimensioni: MICRO: pompe centrifughe per trasferi- mento e filtrazione d’acqua (filtri silex o a cartuccia) per piccole piscine (di tela o di plastica) ed usi domestici. MINI: pompe centrifughe autoadescanti con prefiltro adatte all’uso in piccole o medie piscine.Sono ance adatte ad essere usate con acqua di mare in modo costante. ND: pompe professionali per piscine da 0,5 a 2 Hp progettate per garantire massima affidabilità. Portate: 0 – 500 lt/min Prevalenze: 0 – 18 mt Potenze: 0,19 – 1,5 Kw Corpo pompa, girante, diffusore: poly-propylene + 30% fibra di vetro Albero motore: acciaio INOX 2 poli, di tipo chiuso a ventilazione esterna, classe d’isolamento F, grado di protezione IP55. Portate:0 – 500 lt/min Prevalenze:0 – 18 mt Potenze:0,19 – 1,5 Kw