Produse pentru pompă de solvent (2)

La formulation d’un produit cosmétique est la clé de sa réussite car elle impacte à la fois son efficacité, sa texture et sa qualité. A partir de votre cahier des charges, nous proposons des prototypes fabriqués à partir d'ingrédients naturels. Chaque essai de formulation est évalué avant de vous être proposé pour avoir vos retours et éléments à optimiser. Lorsque vous validez la formule, nous passons aux tests d’évaluation et de caractérisation du produit avant sa fabrication.

Syntech Poliurea Spray-FR Syntech Polyurea Spray-FR is a 100% solid polyurea, it does not contain VOC and can only be applied by spraying using suitable bi-mixer machines that have flow and temperature control and are capable of reaching pressures greater than 180 bar. Added with additives that improve the self-extinguishing properties. It is of the aromatic type and belongs to the Euroclass B s2 d0 according to the EN 13501-1:2005 standard for concrete and fiber cement and in the RAL 7040 colour. It is characterized by a high degree of elongation and this allows it to be used as a very high performance waterproofing, therefore suitable for tanks, tubs and hydraulic works in general. The great adhesion capacity on different supports, after using primer, allows its use on new or existing structures. The pure polyurea Syntech Poliurea Spray-FR guarantees excellent adhesion to the substrate, giving rise to a continuous membrane, without any joints and extremely resistant: environmentally friendly, VOC FREE extremely resistant to atmospheric agents excellent fire resistance properties no weight loss Excellent resistance to puncture, impact and abrasion Constant performance at temperatures - 30 °C / +130 °C High static and dynamic crack-bridging capacity Gel time 10 sec It does not weigh down the structure It adapts to any geometric shape. SYNTECH POLYUREA SPRAY - FR is particularly used as a waterproofing on concrete or as a protective coating for water containment tanks, primary containment, flooring, purification plants, EPS coating, coating and protection of sheet metal, roofs, wooden balconies and canopies, tanks and swimming pools. All surfaces must be free of contaminants and humidity less than 3%; it must offer a mechanical grip on a solid and non-yielding substrate. Where necessary, we recommend preparation using shot peening, bush hammering, sanding or hydrowashing. Consult personnel for correct preparation of the substrate. It is recommended to use primers from the SYNTECH POLIUREA PRIMER range and contact Azichem technical staff for clarification on the most suitable type to use. SYNTECH POLIUREA SPRAY - FR pure polyurea requires a bimixer system capable of producing pressure over 180 bar and temperatures over 65 C°. Contact Azichem technical staff for clarification on the best gun to use and on the details relating to the air system. Approximately 2.9 kg of SYNTECH POLIUREA SPRAY - FR for each square meter of surface to be covered. Barrel 225 kg [A] - Barrel 205 kg [B] - Kit: 1 Barrel 225 kg [A] + 1 Barrel 205 kg [B]