Produse pentru mps 5172 tranzistor (52)

The B+B measuring transducer module Pt1000 with current output 4-20mA, is an accurate reliable digital measuring transducer in a miniaturised PCB design with modern ASIC technology - digitally calibrated for connecting Pt1000 sensors. Name:Measuring transducer module Temperature measuring range:0...+300 °C Sensor:Platinum sensor Pt1000 , resistance characteristic DIN/IEC 60751 Measuring current:<300 µA Accuracy:<0.5% Output signal:4…20 mA, two wire Operating voltage:10...30 V DC Overvoltage protection:Varistor and RC-filter Permissible load:Ra[Ω]≤(Uv[V]-10V) / 0,02 A (only in case of 4…20 mA) Application temperature:-20...+80 °C Connection:Solder termination Dimensions:(LxWxH) 27 x 15 x 5 mm Scope of delivery:Our Pt1000 sensors are not included in scope of delivery, please order separately. Weight:0.002 kg

T0.20B LOW VOLTAGE CURRENT TRANSFORMERS

Il mondo futuro di automazione presenta le sfide quali rete, la velocità, l'accuratezza, l'integrazione e la convenienza. CARATTERISTICHE — Pronto ad usare con c'è ne faccia del sensore per i vostri bisogni di misura, indipendente del produttore — Configurazione ultraveloce del pulsante — Riconoscimento automatico del sensore dovuto lo spaccapietre TEDS — Interfaccia estensibile di fieldbus via il regolatore del bus — Ethernet di sostegni ha basato i fieldbuses come PROFINET, EtherCAT, interfaccia dell'ingresso/uscita di EtherNet/IP oder — Esportazione sincrona di fino a 8 canali di misura via il regolatore del bus — Funzione completa dell'esportazione di misura-dati — Adatto a misure della forza, di pressione, di spostamento, di velocità di rotazione e di coppia di torsione, compreso le misure combinate — Tari la funzione tramite pulsante o i segnali dell'ingresso/uscita per ogni amplificatore 9250 Tipo:di segnale Funzione secondaria:di misura Altre caratteristiche:fieldbus, per pressione, multicanale,

Ersetzt teure Wechslerkontakte, die als Öffner eingesetzt werden Ideal für Alarm-Anwendungen und Levelsensor-Arrays Kundenspezifische Selektierung erhältlich

The pressure transducers of the PD-10LHP series have been developed to measure differential pressure. These OEM pressure transducers have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure tiny pressure differences even at an extremely high line pressure. Pressure Ranges:0…0,1 to 0…30 bar Line Pressure:600 bar Accuracy:±0,25 %FS Long Term Stability:±0,15 %FS Dimensions:⌀ 19 mm x 35 mm Temperature Range:-40…125 °C

TRANSISTOR MG200H-1AL2 - S-2530009

Firstohm M-25 Metal Film Fixed Resistors 422kOhms 1% - RESISTORS Condition:New Manufacturer:FIRSTOHM Type:M-25

Cemented Wirewound Resistor 10w 12 Ohms Rebc10w12r - ELECTRONICS OF LEISURE ACTIVITIES

TSJ/TSSJ Multi-Function Tact Switches Mini-joysticks

Signalkonverter SK20 von SSI Geber Signalen nach Analog 0...10V, 0/4...20mA Konvertierung von SSI-Daten an Analoge Geräte. 16Bit Auflösung 1ms Wandelrate. Lupen/Fensterfunktion. Teach-In Programmierung Eingangssignal: SSI Datenformat: 13/25 Bit Standalone, 8 - 25 Bit Parallelbetrieb Code: Gray- / Binärcode Taktfrequenz: 230 kHz Standalone, 70 - 600kHz Parallelbetrieb Signalausgang: 0-10V, 0/4-20mA Auflösung: 16Bit max. Fehler: 0,1% (Strom) 0,2% (Spannung) Schutzart: IP20 Versorgungsspannung: 24V DC

Die AMS 5812 sind hochgenaue OEM-Sensoren mit analogem und digitalem Ausgang. Die AMS 5812 sind kalibriert und im Bereich von -25 bis +85 °C kompensiert. Die Sensoren haben einen analogen ratiometrischen Ausgang (0,5…4,5 V bzw. 2,5 V ±2 V) und ein I²C-Bus-Interface. Am digitalen Ausgang ist zu­sätzlich zur Druck- auch die Temperaturinformation verfügbar. Die Drucksensoren der Serie AMS 5812 basieren auf hochstabilen, piezoresistiven Druckmesszellen, die zusammen mit einem ASIC auf einem Keramiksubstrat montiert sind. Die Sensoren sind als Nachfolger des SM5852 mit diesem kompatibel, und besitzt einen moderneren ASIC für eine bessere Temperaturkompensation und Kalibration.

The LTC1151CN8 is a high performance, low power, chopper stabilized instrumentation amplifier. It is designed to provide superior performance in a wide variety of applications. Kynix Part #:KY32-TPS544B25RVFT Manufacturer Part #:TPS544B25RVFT Product Category:DC Switching Regulators Manufacturer:Microchip Technology Package:SOP8 Quantity:3157 PCS Lead Time:3(168 Hours)

La serie MM10 sin retorno por muelle / MMR10 con retorno por muelle se utiliza en aplicaciones con espacio muy reducido, que requieren un sensor de desplazamiento miniaturizado con larga vida útil, alta precisión y varilla de empuje guiada en ambos lados. Potenciómetro lineal con resolución casi infinita Diseño mini que ahorra espacio Longitudes de medición de 8 mm a 15 mm Varilla de empuje guiada por detrás y por delante Larga vida útil

1.25G BIDI SFP Optical Transceiver Features Supports1.25Gb/s bit rate Bi-direction transmission, LC Connector Hot Pluggable SFP form factor Digital diagnostic monitoring support Single 3.3V power supply RoHS-10 compliant and lead-free All-metal housing for superior EMI performance Case operating temperature:0℃ to+ 70℃/ -40℃ to +85℃

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Messumformer für Frequenz (Rechtecksignal). Einfache Anwendung; für raue Betriebsbedingungen. Kompakte Bauform für Anreihmontage. Feinjustierung des Messbereichs mit integriertem Trimmpotentiometer; plombierbar. Betriebszustandsanzeige via integrierter LED. Aufgrund seiner Bauart und seiner Zulassungen besonders geeignet für den Schiffbau. Analoger Ausgang: 0...10 VDC, 2..10 VDC, 0...20 mA, 4...20 mA Zulassungen: BV, DNV-GL, LR Betriebsspannung:9...32 VDC Eingangssignal:Frequenz Rechtecksignale Ausgangssignal:0-10 VDC, 2-10 VDC, 0-20 mA, 4-20 mA Betriebstemperatur:-20...+70 °C Anschluss:DIN EN 46244 Flachstecker A6,3 x 0,8 Befestigung:G-Schiene TS32 oder Hutschiene TS35

10G 25G 40G 100G

Measuring transducer for ICP/IEPE 3-way isolation 1 or 2 analogue outputs Plug-in filter modules 10..10 kHz

• Galvanische 3-Wege-Trennung • Zugfederklemmen-Anschluss • Spannungsversorgung über Rückwandbus möglich • Kompakte Bauform, nur 6,2 mm breit • Genauigkeit 0,1% • Mit Speisung für 2-Draht Messumformer

capteur numérique unipolaire à effet Hall IC

Alps ist als Hersteller von Potentiometern seit Jahrzenten weltweit bekannt. Neben den typischen Audioanwendungen werden Alps Proukte immer stärker auch im Automotive Bereich eingesetzt. Als autorisierter Distributor der ALPS ELECTRIC JAPAN können wir Ihnen sämtliche Produkte anbieten. Unser großes Lager ermöglicht es ebenfalls auch kleinere Mengen liefern zu können. Bezeichnung:RK16 Herkunftsland:Japan Typ:Drehpotentiometer sonstiges: mit u. ohne Motor

Depuis de nombreuses années, KUK Group est l'un des principaux fabricants de transformateurs, de selfs et d'émetteurs spécifiques aux clients - aussi bien pour les hautes fréquences (HF) que pour les basses fréquences (LF). Nous bobinons aussi bien des bobines standard que des bobines spécifiques aux clients. Nos connaissances approfondies en matière de bobinage et de fabrication multidisciplinaires font de KUK une organisation professionnelle et fiable dans laquelle les intérêts du client sont d'une importance capitale. -Transformateurs et bobines haute fréquence avec noyaux en ferrite -Transformateurs monophasés et triphasés 50Hz -Armoires de transformation et de distribution pour les sites médicaux tels que les salles d'opération, les unités de soins intensifs et les centres de dialyse

Firecomms’ SMI transceivers comply to the IEEE1394b standard developed for communication over plastic optic fiber. The Small Media Interface has a small form factor with plug options that include a self releasing lock on the plug offering pull force on the cable in excess of 100 N. Non-magnetic versions are available for Medical device applications.

• According to DIN EN 61810-1, DIN EN 60664-1 • Power miniature relay for SMD mounting • High switching power AC 250 V / 5 A • High dielectric strength 4 kV • High limiting continuous current Ith = 5 A • Compact size V = 2,47 cm3 • Safe separation L + K ≥ 5,5 mm EN 50178 Function:Power miniature relay, SMD Type of relay:monostabil Contact material:AgSnO2; AgNi Continuous current:5 A Nominal voltage UN DC:4,5 - 48 V Voltage Range UN:0,75 - 1,6 V Test voltage (AC) contact set - coil:≥ 4 kV eff Clearance and creepage distances, contact set - coil ≥:5,5 mm Temperature range (- / +):40 - 80 °C Protection type:RT III (wash-tight) Size L x W x H:20,2 x 10,1 x 13,5 mm Approvals:cRUus Relay type:OW 5699_SMD

El mundo futuro de la automatización presenta desafíos tales como establecimiento de una red, velocidad, exactitud, integración y rentabilidad. CARACTERÍSTICAS — Listo para utilizar con ningunos haga del sensor para sus necesidades de la medida, independiente del fabricante — Configuración ultrarrápida del botón — Reconocimiento automático del sensor debido al separador TEDS — Interfaz extensible del fieldbus vía el regulador del autobús — Ethernet de las ayudas basó fieldbuses como PROFINET, EtherCAT, interfaz de la entrada-salida de EtherNet/IP oder — Exportación síncrona de hasta 8 canales de la medida vía el regulador del autobús — La instalación completa de la exportación de los medida-datos — Conveniente para la fuerza, la presión, la dislocación, la velocidad rotatoria y las medidas del esfuerzo de torsión, incluyendo medidas combinadas — Destare la instalación vía el botón o las señales de la entrada-salida para cada amplificador 9250 Tipo:de señal Función secundaria:de medidas Otras características:fieldbus, para galga extensométrica, Otras características:para celda de carga, para presión, Otras características:multivías, 8 canales

Precision, reliability and long-term stability are the main characteristics for our digital humidity and temperature sensors with I²C interface. Name:Digital humidity and temperature sensor Humidity measuring range:0...100% RH Humidity accuracy:±1.8% RH at +23 °C Digital interface:I²C, adress 0x28 or alternative adress Hysteresis:<±2% RH Humidity resolution:0.02% RH Linearity error humidity:<±1% RH Response time humidity:<10 s with metal line filter Tk residual error:0.05% RH/K (at 0...+60 °C) Long-term drift humidity:<0.5% RH/a Humidity measuring principle:capacitive polymer humidity sensor Temperature measuring range:-40...+125 °C Accuracy:±0.2 °C (at 0...60 °C) Reproducibility temperature:±0.1 K Response time temperature:<10 s with metal line filter Resolution:0.015 °C Long-term drift temperature:<0.05 K/a Temperature measuring principle:PTAT (integrated) Pressure resistance:16 bar Operating voltage:2.7...5.5 V Connection:TO39 Footprint Dimensions:Ø9x H5.2 mm Current consumption:typ. <22 µA bt 1 Hz measuring rate, 850 µA maximal Weight:0.001 kg

Precision, reliability and long-term stability are the main characteristics for our digital humidity and temperature sensors with I²C interface. Name:Digital humidity and temperature sensor Humidity measuring range:0...100% RH Humidity accuracy:±1,8% RH at +23°C (0...90% RH) Digital interface:I²C, adress 0x28 or alternative adress Hysteresis:<±2% RH Humidity resolution:0.02% RH Linearity error humidity:<±1% RH Response time humidity:<10 s with metal line filter Tk residual error:0.05% RH/K (at 0...+60 °C) Long-term drift humidity:<0.5% RH/a Humidity measuring principle:capacitive polymer humidity sensor Temperature measuring range:-40...+125 °C Accuracy:±0.2 °C (at 0...60 °C) Reproducibility temperature:±0.1 K Response time temperature:<10 s with metal line filter Resolution:0.015 °C Long-term drift temperature:<0.05 K/a Temperature measuring principle:PTAT (integrated) Operating voltage:2.7...5.5 V Connection:TO39 Footprint Dimensions:Ø9x H5.2 mm Current consumption:typ. <22 µA bt 1 Hz measuring rate, 850 µA maximal Weight:0.0008 kg

Precision, reliability and long-term stability are the main characteristics for our digital humidity and temperature sensors with I²C interface. Name:Digital humidity and temperature sensor Humidity measuring range:0...100% RH Humidity accuracy:±1,8% RH at +23°C (0...90% RH) Digital interface:I²C, adress 0x28 or alternative adress Reproducibility humidity:0.2% RH Hysteresis:<±2% RH Humidity resolution:0.03% RH Linearity error humidity:<±1% RH Response time humidity:<4 s Tk residual error:0.05% RH/K (at 0...+60 °C) Long-term drift humidity:<0.5% RH/a Humidity measuring principle:capacitive polymer humidity sensor Temperature measuring range:-40...+125 °C Accuracy:±0.2 °C (at 0...60 °C) Reproducibility temperature:±0.1 K Resolution:0.015 °C Response time temperature:<5 s Long-term drift temperature:<0.05 K/a Temperature measuring principle:PTA (integrated) Operating voltage:2.7...5.5 V Connection:SIL-connection, pluggable, RM 1.27 mm Dimensions:(LxWxH) 10.2 x 5.1 x 1.8 mm Current consumption:typ. <22 µA bt 1 Hz measuring rate, 850 µA maximal Weight:0.0006 kg

The Pt500 temperature sensors are long term-stable, highly accurate and intermateable. The sensors are available in packs of 5. Name:Platinum temperature sensor Sensor element:Pt-thin film measuring resistance Temperature measuring range:-70...+500 °C Temperature Coefficient:TK = 3850 ppm/K Accuracy:Class F 0,3 (Class B) DIN EN 60751 conform Connection wires:NiPt coated wire Connection length:Wire length 10 mm ±1 mm Long-term stability:Max. R0-Drift 0.04% after 1000 h at 500 °C Shock resistant:min. 40g speed-up at 10 to 2000 Hz, depending on way of installation Shock strength:min. 100 g speed-up ati 8 ms half sinusoidal wave, depending on montage Environmental conditions:unprotected, to be used in dry conditions only Self-heating:0,4 k/mW at 0 °C Insulating resistance:>100 MΩ at 20 °C, >2 MΩ at 500 °C Response time temperature:T0,5= 0,05 s;T0,9= 0,15 s; Airflow (v=2 m/s) : T0,5= 3,0 s; T0,9= 10,0 s Measuring current:0,3...1,0 mA 500 Ω: 0,1...0,7 mA 1000Ω: 0,1...0,3 mA Dimensions:(LxWxH) 2.3x 2.1x 0.9 mm Packing unit:5 pieces Weight:0.0044 kg

The Pt100 temperature sensors are long term-stable, highly accurate and intermateable. The sensors are available in packs of 5. Name:Platinum temperature sensor Sensor element:Pt-thin film measuring resistance Temperature measuring range:-70...+500 °C Scope:-50...+300 °C Accuracy:F 0,15 (Cl. A) Temperature Coefficient:TK = 3850 ppm/K Connection wires:NiPt coated wire Connection length:Wire length 10 mm ±1 mm Long-term stability:Max. R0-Drift 0.04% after 1000 h at 500 °C Shock resistant:min. 40g speed-up at 10 to 2000 Hz, depending on way of installation Shock strength:min. 100 g speed-up ati 8 ms half sinusoidal wave, depending on montage Environmental conditions:unprotected, to be used in dry conditions only Insulating resistance:>100 MΩ at 20 °C, >2 MΩ at 500 °C Self-heating:0,4 k/mW at 0 °C Response time temperature:T0,5= 0,05 s;T0,9= 0,15 s; Airflow (v=2 m/s) : T0,5= 3,0 s; T0,9= 10,0 s Measuring current:0,3...1,0 mA 500 Ω: 0,1...0,7 mA 1000Ω: 0,1...0,3 mA Dimensions:(LxWxH) 2.3x 2.1x 0.9 mm Packing unit:5 pieces Weight:0.0044 kg