Produse pentru mingoda (2273)

Plastic Metal Ball Joint P010 Material Information:Plastic-PA66 GF30 Compatible With:S15, S18 Components:P001, PA01 Unit Weight:0,008 KG

Ball Socket Connectors B402 Material Information:Steel ,DIN 1.0718 Surface treatment:Zinc plated Compatible with:S12 Components:B402; DS08 Unit Weight:0,007 KG

Ball Joint Connectors J033 Material Information:Steel ,DIN 1.0718 Surface treatment:Zinc plated Compatible with:S15, S18 Components:B001; DS10; PA45 Unit Weight:0,029 KG

Diabolo Rollers - SPECIAL ROLLERS (GST)

Kleiner manueller Positioniertisch Metrischer Gewindetrieb mit reduziertem Spiel Geführt von 2 Stahlsäulen Präzision und Kompaktheit dieses kleinen manuellen Tisches Hierbei handelt es sich um den kleinsten manuellen Tisch in unserem Sortiment (Breite 54 mm / Höhe 27,5 mm). Der Schraubengang beträgt 1 mm, und die axiale Genauigkeit <0,05 mm nach dem Einrasten (<0,10 mm vor dem Einrasten). Die Arretierung in Position erfolgt an der Übertragungsschraube, entweder am Lager oben auf der Frontplatte (Position B1) oder am Ende des Tisches (Position B2). Taste, Anzeige und maximaler Hub der kleinen Tische Der Wellenabgang ist mit einem Gewinde versehen, um den Rändelknopf mit oder ohne Stellungsanzeiger (oder das Handrad, dies kann jedoch nicht mit einem Anzeiger verwendet werden) einzuschrauben. Beachten Sie die umgekehrte Darstellung der Anzeigen, wenn der Tisch vertikal montiert ist. Der maximal erreichbare Hub beträgt 100 mm, und jeder nicht standardmäßige

Stub Rollers - SPECIAL ROLLERS (GST)

TGS gas spring brackets are made from free cutting steel and stainless steel material which are available with many surface treatment options. Additional to our standard product range we offer custom design gas spring brackets as well.

Conical Rollers - SPECIAL ROLLERS (GST)

Our garland rollers are connected to each other with flexible links and fixed to the conveyor frame with suspension links Free movement in the direction of the belt travel has also a positive influence on the self-centering of the belt easy to replace by lifting the idler set from the mounting hook

Positive action training frames in all configurations Side guide rollers orientate the frame and help ensure the belt tracks centrally on the conveyor Dimensions: Available in all configurations for both carry and return frames Positive action helps keep the belt aligned with the center of the conveyor

Ball Socket Connectors B007 Material Information:Steel ,DIN 1.0718 Surface treatment:Zinc plated Compatible with:S21, S22, W22 Components:B007; DS13 Unit Weight:0,029 KG

Ball Joint Connectors J174s Material Information:Stainless steel / AISI 304 Compatible With:A22,A28 Components:B006S; DS13S; PA55S Unit Weight:0,049KG

increases friction between the belt and the surface of the pulley improves efficiency and guidance helps prevent material building up on the surface of the pulley protects the shell of the pulley from wear provides a wear surface that can be replaced economically Lagging materials for drive and non-driven pulleys: HP142 – Hot vulcanized rubber lagging HP144 – Cold bonded rubber lagging HP145 – Hot vulcanised ceramic lagging HP146 – Cold bonded ceramic lagging HP147 – Hot cast urethane lagging HP148 – Cold bonded urethane lagging HP149 – Direct bonded ceramic lagging

Ball Joint Connectors J032 Material Information:Steel ,DIN 1.0718 Surface treatment:Zinc plated Compatible with: S15, S18, D15, D18, W18 Components:B001; DS10; PA01 Unit Weight:0,029 KG

TGS-Gasfederverbinder bestehen aus Stahl, Edelstahl, Aluminium und Kunststoff, die mit vielen Oberflächenbehandlungsoptionen erhältlich sind. Zusätzlich zu unserem Standardsortiment bieten wir auch kundenspezifische Gasfederendstücke an.

Manual table with double carriage with reversed step (the 2 carriages move away or get closer) Driving by leadscrew Guided by 2 rods Interest of table with reversed step The two carriages move away or get closer symmetrically during the rotation of the trapezoidal screw thanks to right and lefthand thread, this allows for example to adjust the spacing of the outer guides of a conveyor according to the type of product transported. Precision and robustness of right and lefthand thread table The guidance is provided by 2 rods on 4 calibrated bronze bearings (reduced play) or 4 ball bushings for guidance without clearance. The guide length of long body tables (309N/P) allows to accept large loads and torques. The axial positioning accuracy of these tables is <0.15 mm (in practice 0.02 to 0.10 mm). But the blocking in position is done on the carriage, by pressure on a guide rod, so as to remove the axial play of the nut of the trapezoidal screw after blocking Model:309R Positioning indicator Position clamping Guide rods Ø:Ø12 to Ø25 Maxi stroke:200 mm / carriage Maxi carried payload:1 to 40 kg

Hydraulic operated Rotational speed of brush: max. 150 RPM Can be adjusted by hydraulic pump – brush will be lifted to operation position by hydraulic cylinder and keep same pressure against the belt

Ball Joint Connectors J033s Material Information:Stainless steel / AISI 304 Compatible With:A15,A18 Components:B001S; DS10S; PA45S Unit Weight:0,029 KG

Aluminium rollers are ideal for harsh corrosive environments The light weight also provides EHS benefits during installation and replacement Dimensions: Roller diameter 127-152 mm (5” to 6”) Shaft diameter up to 60 mm (2-3/8”) Bearing 6205, 6305, 6307, 6308, 6309

Small manual positioning table Driving by metric screw M6x1 Guided by 2 rods in steel Precision and compactness of this small manual table It is the smallest manual table in our range (width 54 mm / height 27,5 mm). Screw step is 1 mm per round and axial precision of these tables is <0.05 mm after locking in position (<0,10 mm before locking in position). Locking in position is done on the transmission screw, either at the top of the bearing (position B1) or at the end of the table (position B2). Grip knob, position indicator and maxi stroke The shaft outlet is threaded to screw in the grip knob with or without a position indicator (or the handwheel, but it can’t be used with an indicator). The maxi stroke is 100 mm, and any intermediate stroke can be produced. Compact lifting table, miniature cross table and base plate A version « Z axis » allows to fix the table only by its end plate. It can be fixed directly on the carriage of another table for a YZ mounting. Model:309A0 Screw Ø x lead (mm):M6 x 1 Guide rods Ø (mm):Ø8 Strokes (mm):0 – 100 Maxi carried payload (kg):1

Support discs prevent build up on the roller and therefore help avoid accelerated belt wear Various profiles and arrangements are available to suit customer demands Dimensions: Roller diameter 89-250 mm (3-1/2” to 10”) Shaft diameter up to 60 mm (2-3/8”) Roller length up to 3,000 mm (118”)

Positioning table for electric motor Guided by 2 rods on ball bushings (bronze bearings on request) Motor adaptation for linear table These leadscrew tables are delivered without motor, but the adaptation of your motor can be done by us. Some adaptations are standard, especially for standard motors (NEMA17 or NEMA23), if the dimensions of your motor are not listed, contact us to check the feasibility of your motor adaptation from our rough parts. Trapezoidal screw tables for motor The trapezoidal screw is irreversible and the axial precision of these tables is <0.15 mm (in practice 0.02 to 0.10 mm). The maxi stroke is 750 mm, and any intermediate stroke can be produced. For a XY cross table, the tables are mounted on each other directly by the body with option 308922* (smooth holes are made in the body of a table). For more precise positioning applications, these tables are available with ballscrew. Model:3081 to 3084 Guide rods Ø:Ø12 to Ø25 Maxi stroke:400 mm Maxi carried payload:2 to 40 kg

Sprocket Wheel Rollers - SPECIAL ROLLERS (GST)