Produse pentru mingoda (40)

Tisch für Pneumatikzylinder ISO Ø16 bis Ø40 Kugelbuchsenführung Schutz durch Vorabstreifer Steifer als eine Führungseinheit Diese Tische behalten über den gesamten Hub die gleiche Qualität an Führung und Steifigkeit bei. Bei einer vertikal versetzten Masse weisen diese Tische eine höhere Steifigkeit als eine HFührungseinheit auf. Hydraulische Stoßdämpfung auf den Tischen Ein hydraulischer Dämpfer lässt sich gegenüber dem Pneumatikzylinder montieren, um z.B. das Absenken zu dämpfen und/oder den Hub der Zylinderstange zu begrenzen. Der Hub beim Stangenrückzug lässt sich mit Hilfe der schwimmenden Stangenkupplung am Schlitten einstellen. Einsatz in rauher Umgebung Für staubige Umgebungen können zusätzliche Abstreifer aus Nitril oder Polyurethan vor den Kugelbuchsen angebracht werden. Eine korrosionsbeständige Version kann mit Säulen, Stangenkupplung und Schrauben aus rostfreiem Stahl angeboten werden (der Schlitten und die Platten bleiben aus eloxiertem Aluminium).

Führungssäulen für Kugel oder Gleitlager Ø10, 12, 16, 20, 25, 30 und 40 Führungssäulen mit Gewindebohrungen an beiden Enden (außer Edelstahl) Nur 1 Seite) 4 mögliche Materialien – für Kugelbuchsen gehärteter Stahl Cf53 oder gehärteter rostfreier Stahl X46Cr13 (h6) – für Gleitbuchsen Chromstahl CK45 oder Edelstahl 304L (f7) Mehrere Standardlängen auf Lager und Sonderlängen auf Anfrage.

Ces blocs-palier permettent de réaliser des tables linéaires à 2 colonnes Guidage sur 4 douilles à billes Protection par joints racleurs Option : Pour environnement poussiéreux, racleurs additionnels en nitrile (/RNI) ou en polyuréthane (/RPU) Informations complémentaires Ces blocs-paliers (ou paliers quadruples) possèdent 4 douilles à billes équipées de joints racleurs. Pour les environnements poussiéreux ou sévères, les options racleurs additionnels en nitrile (/RNI) ou en polyuréthane (/RPU) sont disponibles. Avec 2 colonnes de guidage en acier trempé, vous réalisez facilement une table linéaire de précision supportant des couples et des charges importantes (suivant la longueur des colonnes). Le corps du bloc palier est en aluminium anodisé. Modèle:5136 Ø colonnes:Ø12 à Ø16 Dimensions:...

Table for pneumatic cylinders ISO Ø16 to Ø40 Guided on ball bushings Protected by wipers seals More rigid than a H guide unit These tables maintaining the same quality of guidance and rigidity throughout the stroke. For a offcentered payload in vertical, these tables allow to be more rigid than a guide unit in H. Hydraulic shock absorber on this table A hydraulic shock absorber may be placed in opposition to the pneumatic cylinder to dampen, for example, the descent and/or limit the stroke at the output of the cylinder rod. The retracting stroke can be adjusted by the floating rod coupling. Use in harsh environment For dusty environments, additional nitrile or polyurethane scrapers can be added in front of the ball bushings. An anticorrosion version can be proposed with the rods, the coupling and the screws in stainless steel (the carriage and the plates remain in anodized aluminum). It’s possible to make these tables with plain bearings (bronze or polymer) on request. Model:3071 à 3074 Cylinder Ø:Ø16 to Ø40 Guide rods Ø:Ø12 to Ø25 For cylinder:ISO6432 and ISO15552 Maxi carried payload:0,5 to 40 kg

Manual lifting table Driving by leadscrew Guided by 2 rods Interest of lifting table These tables can be fixed by only one end thanks to a reinforced sole, for vertical or offset applications (using the mobile body). This simplifies installation directly on a plate or directly on the body of another table no need to build a vertical structure to fix it. In the fixed body version, they also make it possible to fix a load at the end (on the end flange) the quality of the embedding of the guide rods in this flange guarantees reliability even in the event of a bulky load (example label printer). Indeed, the assembly presented on the photo below corresponds to the height and width adjustment application of a label printer on a conveyor. The printer is attached to the end of the horizontal table and the base of the vertical table is attached to the side of the conveyor. For XY crossed tables, the tables are mounted one on the other directly by the body (long body version only) Model:309E - 309N Guide rods Ø:Ø12 to Ø25 Maxi stroke:300 mm Maxi carried payload:1 to 23 kg

Positioning table for electric motor Guided by 2 rods on ball bushings Motor adaptation on linear table These ballscrew tables are delivered without motor, but the adaptation of your motor can be done by us. Some adaptations are standard, especially for standard motors (NEMA17 or NEMA23), if the dimensions of your motor are not listed, contact us to check the feasibility of your motor adaptation from our rough parts. Tables with ballscrew for motor The ballscrew is reversible and the axial precision of these tables is <0.07 mm. The maxi stroke is 400 mm, and any intermediate stroke can be produced. For a XY cross table, the tables are mounted on each other directly by the body with option 308922* (smooth holes are made in the body of a table). For less precise positioning applications, these tables are available with trapezoidal screw. Model:3081 to 3084 Guide rods Ø:Ø12 to Ø25 Maxi stroke:400 mm Maxi carried payload:2 to 40 kg

Kleiner manueller Positioniertisch Metrischer Gewindetrieb mit reduziertem Spiel Geführt von 2 Stahlsäulen Präzision und Kompaktheit dieses kleinen manuellen Tisches Hierbei handelt es sich um den kleinsten manuellen Tisch in unserem Sortiment (Breite 54 mm / Höhe 27,5 mm). Der Schraubengang beträgt 1 mm, und die axiale Genauigkeit <0,05 mm nach dem Einrasten (<0,10 mm vor dem Einrasten). Die Arretierung in Position erfolgt an der Übertragungsschraube, entweder am Lager oben auf der Frontplatte (Position B1) oder am Ende des Tisches (Position B2). Taste, Anzeige und maximaler Hub der kleinen Tische Der Wellenabgang ist mit einem Gewinde versehen, um den Rändelknopf mit oder ohne Stellungsanzeiger (oder das Handrad, dies kann jedoch nicht mit einem Anzeiger verwendet werden) einzuschrauben. Beachten Sie die umgekehrte Darstellung der Anzeigen, wenn der Tisch vertikal montiert ist. Der maximal erreichbare Hub beträgt 100 mm, und jeder nicht standardmäßige

Manual table with double carriage with reversed step (the 2 carriages move away or get closer) Driving by leadscrew Guided by 2 rods Interest of table with reversed step The two carriages move away or get closer symmetrically during the rotation of the trapezoidal screw thanks to right and lefthand thread, this allows for example to adjust the spacing of the outer guides of a conveyor according to the type of product transported. Precision and robustness of right and lefthand thread table The guidance is provided by 2 rods on 4 calibrated bronze bearings (reduced play) or 4 ball bushings for guidance without clearance. The guide length of long body tables (309N/P) allows to accept large loads and torques. The axial positioning accuracy of these tables is <0.15 mm (in practice 0.02 to 0.10 mm). But the blocking in position is done on the carriage, by pressure on a guide rod, so as to remove the axial play of the nut of the trapezoidal screw after blocking Model:309R Positioning indicator Position clamping Guide rods Ø:Ø12 to Ø25 Maxi stroke:200 mm / carriage Maxi carried payload:1 to 40 kg

Small manual positioning table Driving by metric screw M6x1 Guided by 2 rods in steel Precision and compactness of this small manual table It is the smallest manual table in our range (width 54 mm / height 27,5 mm). Screw step is 1 mm per round and axial precision of these tables is <0.05 mm after locking in position (<0,10 mm before locking in position). Locking in position is done on the transmission screw, either at the top of the bearing (position B1) or at the end of the table (position B2). Grip knob, position indicator and maxi stroke The shaft outlet is threaded to screw in the grip knob with or without a position indicator (or the handwheel, but it can’t be used with an indicator). The maxi stroke is 100 mm, and any intermediate stroke can be produced. Compact lifting table, miniature cross table and base plate A version « Z axis » allows to fix the table only by its end plate. It can be fixed directly on the carriage of another table for a YZ mounting. Model:309A0 Screw Ø x lead (mm):M6 x 1 Guide rods Ø (mm):Ø8 Strokes (mm):0 – 100 Maxi carried payload (kg):1

Positioning table for electric motor Guided by 2 rods on ball bushings (bronze bearings on request) Motor adaptation for linear table These leadscrew tables are delivered without motor, but the adaptation of your motor can be done by us. Some adaptations are standard, especially for standard motors (NEMA17 or NEMA23), if the dimensions of your motor are not listed, contact us to check the feasibility of your motor adaptation from our rough parts. Trapezoidal screw tables for motor The trapezoidal screw is irreversible and the axial precision of these tables is <0.15 mm (in practice 0.02 to 0.10 mm). The maxi stroke is 750 mm, and any intermediate stroke can be produced. For a XY cross table, the tables are mounted on each other directly by the body with option 308922* (smooth holes are made in the body of a table). For more precise positioning applications, these tables are available with ballscrew. Model:3081 to 3084 Guide rods Ø:Ø12 to Ø25 Maxi stroke:400 mm Maxi carried payload:2 to 40 kg