Produse pentru mingoda (194)

The ball sector motor valve type 4030 is used in a number of process applications for shut off and control tasks, especially with abrasive, pasty and fibrous fluids. This series is characterised by an extraordinary rangeability of 300 1 and a high flow capacity. Size:DN 25 - DN 300 Pressure DN25 - DN50:PN40, ANSI#300, ANSI#150 Pressure DN65 - DN100:PN25, ANSI#150 Pressure DN125 - DN300:PN16, ANSI#150 Material:Stainless steel 1.4408 / 1.4404 Media temperature:-40 °C up to 220 °C

Das Dreiwege-Kugelsektorventil Typ 4080 mit integriertem Stellungsregler in Aufteilfunktion oder Mischfunktion eignet sich ideal für eine große Bandbreite verfahrenstechnischer Regelaufgaben. Aufgrund seiner Konstruktion ermöglicht das Dreiwege-Kugelsektorventil eine hochpräzise Regelung über einen großen Regelbereich und überzeugt mit außerordentlich hohen Kvs-Werten in allen Durchflussrichtungen. Nennweite::DN50-DN150 Nenndruck:DN 50: PN40; DN 65 - DN150: PN25 Werkstoff:Edelstahl 1.4408 / 1.4404 Temperatur:Medientemperatur -40 °C bis 220 °C je nach Dichtungsausführung

The ball sector valve type 4032 with high resolution motor actuator providing over 8,000 steps of resolution in 90° of travel. Developed as a basis weight control valve for paper production, this high precision control valve is also used in other industries where the highest demands are placed on control quality and positioning accuracy. Size:DN 25 - DN 250 Pressure DN25 - DN50:PN40, ANSI#300, ANSI#150 Pressure DN65 - DN100:PN25, ANSI#150 Pressure DN125 - DN250:PN16, ANSI#150 Material:Stainless steel 1.4408 / 1.4404 Media temperature:-40 °C up to 220 °C

Sintered bronze plain bearings | Maintenance-free | Oil-impregnated | Self-lubricating | DIN 1850 / ISO 2795 SIB-MET® is a self-lubricating and maintenance-free plain bearing. Suitable for high speeds at low loads. Suitable for high sliding speed at low load capacity. For technical details, please visit the product page on our website! Support material/Carrier material:CuSn10 (SINT B50) Static load:≤ 50 N/mm² Dynamic load:≤ 5 N/mm² Sliding speed:≤ 6,0 m/s Friction value:0,05 up to 0,20 µ Temperature strain:-20 up to +100 °C Max. PV-value:1,6 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:H7 / H8 Shaft tolerance:f7

Our rod ends in the best quality for you We manufacture rod ends in various designs for you. You can order these in our online shop in the desired dimensions and with individual adjustments. We will also be happy to supply you with other unique designs at short notice on request. Convince yourself of our more than 40 years of experience in plain bearing technology! Rod ends consist of a housing and a built-in spherical plain bearing. The housing of a screwable rod end has an external or internal thread. Rod ends are particularly suitable for use in linkage and lever connections. In our product range, you will find both maintenance-free and maintenance-bound rod ends. Our special hydraulic rod ends are available either for bolting on or for welding on. Our rod ends are suitable for high static loads. The maintenance-required rod ends can withstand changing loads and impact loads permanently without any problems, while maintenance-free models can only do this to a limited extent.

Rolled composite plain bearing | Maintenance-free | Steel / graphite bronze | With embedded solid lubricants GAP-MET®/S is a maintenance-free composite plain bearing. However, oil or grease lubrication is possible. High load capacity and strength, for all slow movement types, suitable for contaminated environments, no moisture absorption, good chemical resistance. For technical details, please visit the product page on our website! Support material/Carrier material:Steel (also available as bronze GAP-MET®/B or stainless steel GAP-MET®/N) Intermediate layer:CuSn alloy Sliding layer:Graphit film Static load:≤ 260 N/mm² Dynamic load:≤ 80 N/mm² Sliding speed:≤ 0,5 m/s Friction value:0,10 up to 0,20 µ Temperature strain:-150 up to +280 °C Max. PV-value:1,0 N/mm² x m/s Housing Ø:H7 Bushing inner ø after mounting:H8 / H9 Shaft tolerance:To be specified by the client

Wrapped composite sliding bearing steel / POM | low-maintenance | With lubrication pockets | DIN 1494 / ISO 3547 POM-MET® is a low-maintenance composite sliding bearing with a POM coating. Initial lubrication is required. Both oil or grease lubrication are possible. Due to the lubricant pockets, relubrication intervals are significantly reduced! Suitable for all sliding movements, good load capacity, robust and resistant to dirt. Suitable for grease or oil lubrication and all kinds of movement, good load capacity, robust and insensible to dirt. For technical details, please visit the product page on our website! Support material/Carrier material:Tin-plated steel (1.0330) Intermediate layer:Sintered bronze Sliding layer:Acetal resin / POM Static load:≤ 250 N/mm² Dynamic load:≤ 140 N/mm² Sliding speed:≤ 2,5 m/s Friction value:0,04 to 0,12 µ Temperature strain:–40 bis +130 °C Max. PV-value:2,8 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:D9 to D10 Shaft tolerance:h8

Wrapped bronze sliding bearing with lubrication pockets/ CuSn8P (DIN 17662) | Low-maintenance | DIN 1494 / ISO 3547 BRO-MET® is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. Due to the lubricant depots, relubrication intervals are significantly reduced! High load capacity and strength with low wear, suitable for rough operation, corrosion resistant. High load capacity and stability at low abrasion, suited for rough operation, corrosion resistant. For technical details, please visit the product page on our website! Support material/Carrier material:Bronze (CuSn8P) Static load:≤ 120 N/mm² Dynamic load:≤ 40 N/mm² Sliding speed:≤ 2,5 m/s Friction value:0,05 up to 0,12 µ Temperature strain:-40 up to +250 °C Max. PV-value:2,8 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:H9 Shaft tolerance:f7

Spherical plain bearings are machine elements that can be installed immediately and are produced according to a specific standard. Since they are plain bearings, there is sliding contact between the inner and outer ring. Spherical plain bearings are ideal for rotary, tilting and swivelling movements and are insensitive to shocks, impacts and vibrations. This makes them extremely popular for load-bearing and guiding functions. You will find both maintenance-free and maintenance-required spherical plain bearings in our product range. Our maintenance-free spherical plain bearings comply with DIN ISO 12240-1, dimensional series E/G. The sliding pairing consists of a hard chrome/PTFE composite. The bearings themselves are manufactured with the tolerance group CN. These are also available in sealed versions. If you require additional dimensions or unique designs, please let us know in an enquiry form, and we will supply you with the desired product.

Solid sintered bronze bearing | Maintenance-free | With uniformly embedded solid lubricant in the bronze or iron matrix GAP-MET®/M is a maintenance-free plain bearing. However, oil or grease lubrication is possible. High load capacity and strength for all slow movement types, suitable for contaminated environments, no moisture absorption, good chemical resistance and good temperature resistance. The parts are mechanically reworkable. For technical details, please visit the product page on our website! Support material/Carrier material:Self-lubricating sliding material, powder metallurgically produced. Homogeneous microscopic fine dis Static load:≤ 250 N/mm² Dynamic load:≤ 130 N/mm² Sliding speed:≤ 0,4 m/s Friction value:0,10 up to 0,20 µ Temperature strain:-50 up to +350 °C Max. PV-value:1,5 N/mm² x m/s Housing Ø:H7 Bushing inner ø after mounting:According to customer specification (D8 / H8 / H9) Shaft tolerance:To be specified by the client

Wrapped bronze sliding bearing with lubrication holes/ CuSn8P (DIN 17662) | Low-maintenance | DIN 1494 / ISO 3547 BRO-MET®/L is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. The hole depots reduce the relubrication intervals even more! High load capacity and strength with low wear, suitable for rough operation, corrosion resistant. High load capacity and stability at low abrasion. Because of perforations lubrication clearances are reduced to a minimum! For technical details, please visit the product page on our website! Support material/Carrier material:Bronze (CuSn8P) Static load:≤ 120 N/mm² Dynamic load:≤ 40 N/mm² Sliding speed:≤ 2,5 m/s Friction value:0,05 up to 0,20 µ Temperature strain:-40 up to +250 °C Max. PV-value:2,8 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:H9 Shaft tolerance:f7

COM-KU®/S is a self-lubricating and maintenance-free plastic plain bearing. However, additional lubrication is possible. It is well suited for simple applications and axial movements Support material/Carrier material:Plastic bearing produced in injection moulding process Static load:≤ 70 N/mm² Dynamic load:≤ 40 N/mm² Sliding speed:≤ 1,0 m/s Friction value:0,08 up to 0,20 µ Temperature strain:-50 up to +100 °C Max. PV-value:0,6 N/mm² x m/s Humidity absorption:0.1 % at 20 °C in 24 h Housing Ø:H7 Bushing inner ø after mounting:E10 Shaft tolerance:h - tolerance (recommended h9)

Das Kugelsektorventil Typ 4040 mit pneumatischem Antrieb kann für nahezu alle Absperr- und Regelaufgaben insbesondere bei abrasiven, pastösen und faserhaltigen Fluiden eingesetzt werden. Diese Baureihe zeichnet sich durch extrem hohe Stellverhältnisse (300:1) und einer hohen Durchflussleistung aus. Stellungsregler: Digitaler Stellungsregler Typ 8049; Stellungsregler mit integriertem Prozessregler Typ 8049 IPC; Stellungsregler Typ 8049 optional in EX- Ausführung; Stellungsregler mit Anbau nach VDI-Standard Antriebsvarianten: Pneumatischer Schwenkantrieb mit Anbausatz nach DIN/ISO 5211; Einfachwirkend oder Doppeldwirkend; Ohne Antrieb mit Standardanbausatz nach DIN/ISO 5211; Handbetätigt Nennweite:DN 25 - DN 300 Nenndruck:DN25 - DN50: PN40, ANSI#300, ANSI#150; DN65 - DN100: PN25, ANSI#150; DN125 - DN300: PN16, ANSI#150 Werkstoffe:Edelstahl 1.4408 / 1.4404 Temperatur:-40 °C bis 220 °C Anschlüsse:Zwischenflansch-Ausführung Zubehör:Endlagenschalter; Stellungsrückmeldung; Filterdruckregler; Pilotventil; … Anwendung:Flüssigkeiten, Suspensionen sowie Gase, auch verschmutzt, abrasiv oder pastös.

Wrapped composite sliding bearing with lubrication pockets/ copper-plated steel & AlSn20Cu | Low-maintenance | DIN 1494 / ISO 3547 For high sliding speeds, optimum sliding behaviour with good lubricant supply. BIV-MET®/A is a composite sliding bearing requiring maintenance; oil or grease lubrication is needed. For technical details, please visit the product page on our website! Support material/Carrier material:steel tin plated (1.0330) Sliding layer:AlSn20Cu Static load:≤ 100 N/mm² Dynamic load:≤ 700 N/mm² Sliding speed:≤ 25 m/s Friction value:0,08 up to 0,17 µ Temperature strain:-10 up to +200 °C Max. PV-value:6,0 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:H9 Shaft tolerance:f7

ROBUST Series—BGR

Spinshot TM II Series

Spinshot TM II Series

Ball fountain made of corten steel with water bowl model FIDSCHI Ball fountain and water bowl, overflowing with LED lighting Here starts modern garden architecture Standard dimensions Delivery includes: - fully funcional inclusive pump, assembly instruction with assembly parts - with LED lighting in warm white - water collection basin made of GFK plastic with GFK cover, which is buried under the AQUA BOWL in the ground - power connection with 220 V and 5m electric wire and schuko plug (type CEE 7/4) 2 sockets are required for the lighting and pump.

Ball fountain Trilogy Model Barbados Ball fountain Trilogy made of CORTENsteel in a linearly arrangement Standard dimensions ØKugeln Gewicht Ø Sammelgefäß Delivery includes: - fully funcional inclusive pump, assembly instruction with assembly parts - with LED lighting in warm white - galvanized water basin with fine woven granting (free openings <15mm) which can be buried under the ground - for a ground-level installation is a cover necessery - power connection with 220 V and 5m electric wire and schuko plug (type CEE 7/4) - decorative gravel >15mm recommended 2 sockets are required for the lighting and pump.

Standard Series

AL/BL sliders with light-(Z) or medium (H) preload are standard stock items with prompt delivery AL:Normal length, low height-square type slider with tap holes on top BL:Long length, low height-square type slider with tap holes on top

The eye-catcher: ball fountain SAMOA Noble ball fountain made of corten steel Standard dimensions Delivery includes: - fully funcional inclusive pump, assembly instruction with assembly parts - with LED lighting in warm white - water collection basin made of GFK plastic with GFK cover, which is buried under the AQUA BOWL in the ground - power connection with 220 V and 5m electric wire and schuko plug (type CEE 7/4) - Decorative gavel > 15 mm recommended 2 sockets are required for the lighting and pump.

fine-grain solid carbide ball nose end mill: with single flute

fine-grain solid carbide 3D ball nose end mill: with double flute

ROBUST Series—BGR

fine-grain solid carbide radius end mill: with single flute, right-hand cutting, shank without clamping surface DIN 6535-HA

AN/BN sliders with light- (Z) or medium (H) preload are standard stock items with prompt delivery AN: Normal length, high-square type slider with tap holes on top BN: Long length, high-square type slider with tap holes on top

fine-grain solid carbide pyramid end mill: burr style with toothed ball nose, right-hand cutting, shank without clamping surface DIN 6535-HA, suitable for fibreglass-reinforced plastics and foams, also available with diamond-coating (price on request)

Standard Series

Wide Series