Produse pentru mingoda (68)

The ball sector motor valve type 4037 is suitable for use in potentially explosive atmospheres in accordance with Directive 94/9 EC. This motorized control valve is used in a number of process applications for shutoff and control tasks, especially with abrasive, pasty and fibrous fluids. Size:DN 25 - DN100 Pressure DN25 - DN50:PN40, ANSI#300, ANSI#150 Pressure DN65 - DN100:PN25, ANSI#150 Material:Stainless steel 1.4408 / 1.4404 Media temperature:-40 °C up to 220 °C

Rolled composite plain bearing steel / PTFE coated | Maintenance-free dry plain bearing | DIN 1494 / ISO 3547 TEF-MET/B is a versatile, corrosion-resistant dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding and wear behaviour, for all types of movement, high load capacity, good corrosion resistance, non-magnetic. For technical details, please visit the product page on our website! Support material/Carrier material:Bronze (CuSn6) Intermediate layer:Sintered bronze Sliding layer:PTFE Static load:≤ 200 [N/mm2] Dynamic load:≤ 140 [N/mm2] at slow sliding speed Sliding speed:≤ 2.5 [m/s] Friction value:0.02 [µ] to 0.18 [µ] Temperature strain:– 200 [°C] to + 280 [°C] Max. PV-value:1.8 [N/mm² x m/s] Housing Ø:H7 Bushing inner-Ø after mounting:H9 Shaft tolerance:f7

Machined bronze plain bearing | Requires maintenance | DIN 1850 / ISO 4379 BRO-MAS® is a plain bearing requiring maintenance, is suitable for operation in contaminated environments, has good corrosion resistance, and is insensitive to shock loads. Oil or grease lubrication is needed. Additional lubrication grooves or holes significantly reduce relubrication intervals and improve lubricant distribution. For technical details, please visit the product page on our website! Support material/Carrier material:CuZn25Al5 (Standard alloy) Static load:≤ 200 N/mm² Dynamic load:≤ 150 N/mm² Sliding speed:≤ 10 m/s Friction value:0,09 up to 0,15 µ Temperature strain:-40 up to +300 °C Max. PV-value:1,8 N/mm² x m/s Hardness:190 - 220 HB Housing Ø:H7 Bushing inner-Ø after mounting:E7 / s6 (until 120 ø r6) Shaft tolerance:f7

Wrapped composite sliding bearing with lubrication pockets/ CuSn8P & graphite | maintenance-free | DIN 1494 / ISO 3547 BRO-LUB is a maintenance-free bronze plain bearing with solid lubricant depots. Initial lubrication is necessary! High load capacity with low wear, very suitable for low sliding speeds and oscillating movements. For technical details, please visit the product page on our website! Support material/Carrier material:Bronze (CuSn8P) Static load:≤ 120 N/mm² Dynamic load:≤ 40 N/mm² Sliding speed:≤ 2,5 m/s Friction value:0,03 up to 0,25 µ Temperature strain:-100 up to +200 °C Max. PV-value:2,8 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:H9 Shaft tolerance:f7

Solid bronze plain bearing | Maintenance-free | With solid lubricant deposits in the sliding surface | Version available with water-resistant solid lubricant LUB-MET® is a maintenance-free plain bearing. However, initial lubrication is necessary. For high loads, shock loads, wear-resistant, insensitive to dirt, corrosion-resistant, long service life. For technical details, please visit the product page on our website!v Support material/Carrier material:CuZn25Al5 Static load:≤ 150 N/mm² Dynamic load:≤ 100 N/mm² Sliding speed:≤ 1,0 m/s Friction value:0,03 up to 0,20 µ Temperature strain:-100 up to +300 °C Max. PV-value:2,8 N/mm² x m/s Hardness:190 - 220 HB Solid lubricant percentage:25 - 30 % Housing Ø:H7 Bushing inner-Ø after mounting:E7 / s6 (until 120 ø r6) Shaft tolerance:f7

La vanne à trois voies à secteur sphérique Type 4080 avec positionneur intégré en fonction de répartition ou de mélange est idéale pour une large gamme de tâches de régulation de procédés industriels. Grâce à sa construction, la vanne à trois voies à secteur sphérique permet une régulation très précise sur une grande plage de réglage et convainc par des valeurs Kvs exceptionnellement élevées dans toutes les directions de débit. Taille:: DN 50 - DN 150 Pression::DN 50: PN40; DN 65 - DN150: PN25 Matériaux:Acier inox 1.4408 / 1.4404 Température::Température du fluide de -40 °C à +220 °C selon d'étanchéite

Filament-wound composite bearing with self-lubricating inner | Surface backed with a high-strength | Maintenance-free | With a sliding layer of PTFE with lubricant additives COM-KU®/M is a self-lubricating and maintenance-free plastic plain bearing. Using a heavy-duty glass fibre fabric combined with a selected binder resin helps to increase the mechanical properties, pressure further and wear resistance of this bearing type. The special lubricant additives and the PTFE in the sliding layer reduce the friction coefficient, optimising the wear behaviour and thus the material's service life as a dry sliding bearing. For technical details, please visit the product page on our website! Support material/Carrier material:Compound plastic in winding technology Static load:≤ 240 N/mm² Dynamic load:≤ 140 N/mm² Sliding speed:≤ 0,2 m/s Friction value:0,03 up to 0,12 µ Temperature strain:-100 up to +130 °C Max. PV-value:1,8 N/mm² x m/s Humidity absorption:0.15 % at 20 °C in 24 h Housing Ø:H7 Bushing inner ø after mounting:H9 Shaft tolerance:h7 / h8

Wrapped composite sliding bearing Stainless steel / PTFE coated | Maintenance-free dry sliding bearing | Corrosion resistance | Chemical resistance | DIN 1494 / ISO 3547 NOX-MET® is a versatile, corrosion-resistant dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding and wear behaviour, high load capacity, shock resistant, chemically resistant against acids and bases (ph-value 0-14), corrosion resistant. For technical details, please visit the product page on our website! Support material/Carrier material:1.4301 (1.4401 on request) Intermediate layer:Sintered bronze Sliding layer:PTFE Static load:≤ 250 [N/mm2] Dynamic load:≤ 140 N/mm² Sliding speed:≤ 2.0 [m/s] Friction value:0,02 to 0,18 Temperature strain:–200 to +280°C Max. PV-value:1,8 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:H9 Shaft tolerance:f7

Das Kugelsektor-Motorventil Typ 4030 wird in einer Reihe von verfahrenstechnischen Prozessen für Absperr- und Regelaufgaben insbesondere bei abrasiven, pastösen und faserhaltigen Fluiden eingesetzt. Diese Baureihe zeichnet sich durch extrem hohe Stellverhältnisse (300:1) und einer hohen Durchflussleistung aus. Nennweite:DN 25 - DN 300 Nenndruck:DN25 - DN50: PN40, ANSI#300, ANSI#150; DN65 - DN100: PN25, ANSI#150; DN125 - DN300: PN16, ANSI#150; Temperatur:-40°C bis 220°C Werkstoffe:Edelstahl 1.4408 / 1.4404 Anschlüsse:Zwischenflansch-Ausführung Zubehör:Endlagenschalter; Stellungsrückmeldung; Nullspannungsrückstellung; … Motorantrieb:Regelantriebe oder 3-Punkt Antriebe; Spannung 230 VAC, 115 VAC, 24 VAC; 400 V, 24 VDC Antriebsvarianten:Elektrische Schwenkantriebe (Auf/Zu, Regelung) Anwendung:Flüssigkeiten, Suspensionen sowie Gase, auch verschmutzt, abrasiv oder pastös.

Wrapped composite sliding bearing with lubrication pockets/ copper-plated steel & CuSn10Pb10 & graphite | maintenance-free | DIN 1494 / ISO 3547 BIV-LUB® is a maintenance-free composite plain bearing with solid lubricant depots. Initial lubrication is necessary! High load capacity with low wear, very suitable for low sliding speeds and oscillating movements. For technical details, please visit the product page on our website! Support material/Carrier material:steel copper plated (1.0330) Sliding layer:CuPb10Sn10CuPb10Sn10 (leadfree on request) Static load:≤ 200 N/mm² Dynamic load:≤ 75 N/mm² Sliding speed:≤ 0,4 m/s Friction value ***:0,08 up to 0,22 µ Temperature strain:-100 up to +200 °C Max. PV-value:2,8 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:H9 Shaft tolerance:f7

T-Slot Nuts and Rhombus T-Slot Nuts for Aluminum Profiles for groove width: 5 - 6 - 6,5 - 8 - 10 - 11 - 12 different designs possible: — single, double — retractable, swiveling — with/without thread — ESD-capable different fixations possible: — spring plate — spring ball — pressure spring different materials possible: — steel, galvanized — plastic — stainless steel separate spring for slot nut as mounting and positioning aid available as accessory many different designs in lengths and widths with/without fixation in the delivery assortment individual designs on request

Wrapped composite sliding bearing steel / Special PTFE coated Maintenance-free dry sliding bearing | DIN 1494 / ISO 3547 TEF-MET/P is a versatile dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, it is very well suited for lubricated applications (e.g. hydraulic oil lubrication). For technical details, please visit the product page on our website! Support material/Carrier material:Steel tin-plated Intermediate layer:Sintered bronze Sliding layer:PTFE + fillers Static load:≤ 250 [N/mm2] Dynamic load:≤ 140 [N/mm2] at slow sliding speed Sliding speed:≤ 2,5 m/s Friction value:0,02 to 0,18 Temperature strain:– 200 to + 280 °C Max. PV-value:1,8 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:H9 Shaft tolerance:f7

Wrapped spring steel plain bearing | Requires maintenance | DIN 1498 | DIN 1499 FER-MET® is a spring steel plain bearing without integrated sliding material. Lubrication of the bearing point is necessary. Very high load capacity and impact resistance for heavy-loaded applications with impact loads. Very wear-resistant. A standard gap design with a straight slot and without chamfer inside [EG], but can also be manufactured with other slot shapes if required. For technical details, please visit the product page on our website! Support material/Carrier material:55Si7/CK67 Static load:≤ 350 N/mm² Dynamic load:≤ 200 N/mm² Sliding speed:≤ 1,1 m/s Friction value:0,50 up to 0,60 µ Temperature strain:-200 up to +350 °C Max. PV-value:1,2 N/mm² x m/s Hardness:48 – 52 HRC Housing Ø:H8 Bushing inner-Ø after mounting:D10 up to D13 Shaft tolerance:f7 up to h8

Fibre-reinforced compound plain bearing in wound technology | Maintenance-free | High load capacity COM-KU®/D is a self-lubricating and maintenance-free compound plain bearing. It has good sliding properties and is suitable for loads (also impact loads and with edge pressures). Good damping properties, very suitable for low sliding speeds, good chemical resistance, and long service life. Suitable as a replacement for lubricated bearings. For technical details, please visit the product page on our website! Support material/Carrier material:Compound plastic in winding technology Static load:≤ 130 N/mm² Dynamic load:≤ 100 N/mm² Sliding speed:≤ 2 m/s Friction value:0,04 up to 0,10 µ Temperature strain:-200 up to +150 °C Humidity absorption:0.3 % at 20 °C in 24 h Housing Ø:H7 Bushing inner-Ø after mounting:Depending on the diameter. It should be kept in mind that this material's installation dimensions an Shaft tolerance:Depending on the application

Solid, turned, grinded and hardened steel plain bearing | Requires maintenance FER-MAS® is a steel plain bearing without integrated sliding material. Good lubrication is required! Suitable for highest loads, insensitive, long service life. For technical details, please visit the product page on our website! Support material/Carrier material:100Cr6 hardened and grinded alternatively 20MnV6 Static load:≤ 250 N/mm² Dynamic load:≤ 150 N/mm² Sliding speed:≤ 0,6 m/s Friction value:0,05 up to 0,25 µ Temperature strain:-100 up to +250 °C Max. PV-value:1,2 N/mm² x m/s Hardness:58 up to 62 HRC Housing Ø:H7 Shaft tolerance:f7 to h6

Das Kugelsektorventil Typ 4032 mit hochauflösendem Motorantrieb ermöglicht eine Ansteuerung von bis zu 8192 Einzelschritten auf 90° Schwenkbewegung. Als Flächengewichtsregelventil für die Papierherstellung entwickelt, findet dieses hochpräzise Stellventil auch Anwendungen in anderen Branchen bei höchsten Anforderungen an die Regelgüte und Positioniergenauigkeit. Antriebsvarianten: Elektrische Stellantriebe mit ca. 8200 Schritte/90°; Elektrische Stellantriebe mit ca. 1500 Schritte/90°; Elektrische Stellantriebe mit ca. 2000 Schritte/90° Nennweite:DN 25 - DN 250 Nenndruck:DN25 - DN50: PN40, ANSI#300, ANSI#150; DN65 - DN100: PN25, ANSI#150; DN125 - DN250: PN16, ANSI#150 Werkstoffe:Edelstahl 1.4408 / 1.4404 Temperatur:-40 °C bis 220 °C Anschlüsse:Zwischenflansch-Ausführung Motorantrieb:Regelantriebe ; S1500 24VDC, S2000 24VDC, Papyros 100 - 230 VAC Anwendung:Flüssigkeiten, Suspensionen sowie Gase, auch verschmutzt, abrasiv oder pastös. Eingangssignal:4 - 20 mA, Schrittsignal; Profibus, Modbus

Wrapped composite plain bearing steel / PTFE coated | Maintenance-free dry plain bearing | DIN 1494 / ISO 3547 TEF-MET is a versatile dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding- and wear behaviour, for all types of movement, high load capacity, all-round adaptable. For technical details, please visit the product page on our website! Support material/Carrier material:Steel tin-plated Intermediate layer:Sintered bronze Sliding layer:PTFE Static load:≤ 250 N/mm² Dynamic load:≤ 140 N/mm² Sliding speed:≤ 2,5 m/s Friction value:0,02 up to 0,18 µ Temperature strain:– 200 up to + 280 °C Max. PV-value:1,8 N/mm² x m/s Housing Ø:H7 Bushing inner ø after mounting:H9 Shaft tolerance:f7

The ball sector valve type 4040 with pneumatic actuator can be used for almost all on/off and control applications, especially with abrasive, pasty and fibrous fluids. This series is characterised by an extraordinary rangeability of 300 1 and a high flow capacity. Size:DN 25 - DN 300 Pressure DN25 - DN50:PN40, ANSI#300, ANSI#150 Pressure DN65 - DN100:PN25, ANSI#150 Pressure DN125 - DN300:PN16, ANSI#150 Material:Stainless steel 1.4408 / 1.4404 Media temperature:-40 °C up to 220 °C

The ball sector motor valve type 4030 is used in a number of process applications for shut off and control tasks, especially with abrasive, pasty and fibrous fluids. This series is characterised by an extraordinary rangeability of 300 1 and a high flow capacity. Size:DN 25 - DN 300 Pressure DN25 - DN50:PN40, ANSI#300, ANSI#150 Pressure DN65 - DN100:PN25, ANSI#150 Pressure DN125 - DN300:PN16, ANSI#150 Material:Stainless steel 1.4408 / 1.4404 Media temperature:-40 °C up to 220 °C

Das Dreiwege-Kugelsektorventil Typ 4080 mit integriertem Stellungsregler in Aufteilfunktion oder Mischfunktion eignet sich ideal für eine große Bandbreite verfahrenstechnischer Regelaufgaben. Aufgrund seiner Konstruktion ermöglicht das Dreiwege-Kugelsektorventil eine hochpräzise Regelung über einen großen Regelbereich und überzeugt mit außerordentlich hohen Kvs-Werten in allen Durchflussrichtungen. Nennweite::DN50-DN150 Nenndruck:DN 50: PN40; DN 65 - DN150: PN25 Werkstoff:Edelstahl 1.4408 / 1.4404 Temperatur:Medientemperatur -40 °C bis 220 °C je nach Dichtungsausführung

The ball sector valve type 4032 with high resolution motor actuator providing over 8,000 steps of resolution in 90° of travel. Developed as a basis weight control valve for paper production, this high precision control valve is also used in other industries where the highest demands are placed on control quality and positioning accuracy. Size:DN 25 - DN 250 Pressure DN25 - DN50:PN40, ANSI#300, ANSI#150 Pressure DN65 - DN100:PN25, ANSI#150 Pressure DN125 - DN250:PN16, ANSI#150 Material:Stainless steel 1.4408 / 1.4404 Media temperature:-40 °C up to 220 °C

Sintered bronze plain bearings | Maintenance-free | Oil-impregnated | Self-lubricating | DIN 1850 / ISO 2795 SIB-MET® is a self-lubricating and maintenance-free plain bearing. Suitable for high speeds at low loads. Suitable for high sliding speed at low load capacity. For technical details, please visit the product page on our website! Support material/Carrier material:CuSn10 (SINT B50) Static load:≤ 50 N/mm² Dynamic load:≤ 5 N/mm² Sliding speed:≤ 6,0 m/s Friction value:0,05 up to 0,20 µ Temperature strain:-20 up to +100 °C Max. PV-value:1,6 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:H7 / H8 Shaft tolerance:f7

Our rod ends in the best quality for you We manufacture rod ends in various designs for you. You can order these in our online shop in the desired dimensions and with individual adjustments. We will also be happy to supply you with other unique designs at short notice on request. Convince yourself of our more than 40 years of experience in plain bearing technology! Rod ends consist of a housing and a built-in spherical plain bearing. The housing of a screwable rod end has an external or internal thread. Rod ends are particularly suitable for use in linkage and lever connections. In our product range, you will find both maintenance-free and maintenance-bound rod ends. Our special hydraulic rod ends are available either for bolting on or for welding on. Our rod ends are suitable for high static loads. The maintenance-required rod ends can withstand changing loads and impact loads permanently without any problems, while maintenance-free models can only do this to a limited extent.

Rolled composite plain bearing | Maintenance-free | Steel / graphite bronze | With embedded solid lubricants GAP-MET®/S is a maintenance-free composite plain bearing. However, oil or grease lubrication is possible. High load capacity and strength, for all slow movement types, suitable for contaminated environments, no moisture absorption, good chemical resistance. For technical details, please visit the product page on our website! Support material/Carrier material:Steel (also available as bronze GAP-MET®/B or stainless steel GAP-MET®/N) Intermediate layer:CuSn alloy Sliding layer:Graphit film Static load:≤ 260 N/mm² Dynamic load:≤ 80 N/mm² Sliding speed:≤ 0,5 m/s Friction value:0,10 up to 0,20 µ Temperature strain:-150 up to +280 °C Max. PV-value:1,0 N/mm² x m/s Housing Ø:H7 Bushing inner ø after mounting:H8 / H9 Shaft tolerance:To be specified by the client

Wrapped composite sliding bearing steel / POM | low-maintenance | With lubrication pockets | DIN 1494 / ISO 3547 POM-MET® is a low-maintenance composite sliding bearing with a POM coating. Initial lubrication is required. Both oil or grease lubrication are possible. Due to the lubricant pockets, relubrication intervals are significantly reduced! Suitable for all sliding movements, good load capacity, robust and resistant to dirt. Suitable for grease or oil lubrication and all kinds of movement, good load capacity, robust and insensible to dirt. For technical details, please visit the product page on our website! Support material/Carrier material:Tin-plated steel (1.0330) Intermediate layer:Sintered bronze Sliding layer:Acetal resin / POM Static load:≤ 250 N/mm² Dynamic load:≤ 140 N/mm² Sliding speed:≤ 2,5 m/s Friction value:0,04 to 0,12 µ Temperature strain:–40 bis +130 °C Max. PV-value:2,8 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:D9 to D10 Shaft tolerance:h8

Wrapped bronze sliding bearing with lubrication pockets/ CuSn8P (DIN 17662) | Low-maintenance | DIN 1494 / ISO 3547 BRO-MET® is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. Due to the lubricant depots, relubrication intervals are significantly reduced! High load capacity and strength with low wear, suitable for rough operation, corrosion resistant. High load capacity and stability at low abrasion, suited for rough operation, corrosion resistant. For technical details, please visit the product page on our website! Support material/Carrier material:Bronze (CuSn8P) Static load:≤ 120 N/mm² Dynamic load:≤ 40 N/mm² Sliding speed:≤ 2,5 m/s Friction value:0,05 up to 0,12 µ Temperature strain:-40 up to +250 °C Max. PV-value:2,8 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:H9 Shaft tolerance:f7

Spherical plain bearings are machine elements that can be installed immediately and are produced according to a specific standard. Since they are plain bearings, there is sliding contact between the inner and outer ring. Spherical plain bearings are ideal for rotary, tilting and swivelling movements and are insensitive to shocks, impacts and vibrations. This makes them extremely popular for load-bearing and guiding functions. You will find both maintenance-free and maintenance-required spherical plain bearings in our product range. Our maintenance-free spherical plain bearings comply with DIN ISO 12240-1, dimensional series E/G. The sliding pairing consists of a hard chrome/PTFE composite. The bearings themselves are manufactured with the tolerance group CN. These are also available in sealed versions. If you require additional dimensions or unique designs, please let us know in an enquiry form, and we will supply you with the desired product.

Solid sintered bronze bearing | Maintenance-free | With uniformly embedded solid lubricant in the bronze or iron matrix GAP-MET®/M is a maintenance-free plain bearing. However, oil or grease lubrication is possible. High load capacity and strength for all slow movement types, suitable for contaminated environments, no moisture absorption, good chemical resistance and good temperature resistance. The parts are mechanically reworkable. For technical details, please visit the product page on our website! Support material/Carrier material:Self-lubricating sliding material, powder metallurgically produced. Homogeneous microscopic fine dis Static load:≤ 250 N/mm² Dynamic load:≤ 130 N/mm² Sliding speed:≤ 0,4 m/s Friction value:0,10 up to 0,20 µ Temperature strain:-50 up to +350 °C Max. PV-value:1,5 N/mm² x m/s Housing Ø:H7 Bushing inner ø after mounting:According to customer specification (D8 / H8 / H9) Shaft tolerance:To be specified by the client

Wrapped bronze sliding bearing with lubrication holes/ CuSn8P (DIN 17662) | Low-maintenance | DIN 1494 / ISO 3547 BRO-MET®/L is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. The hole depots reduce the relubrication intervals even more! High load capacity and strength with low wear, suitable for rough operation, corrosion resistant. High load capacity and stability at low abrasion. Because of perforations lubrication clearances are reduced to a minimum! For technical details, please visit the product page on our website! Support material/Carrier material:Bronze (CuSn8P) Static load:≤ 120 N/mm² Dynamic load:≤ 40 N/mm² Sliding speed:≤ 2,5 m/s Friction value:0,05 up to 0,20 µ Temperature strain:-40 up to +250 °C Max. PV-value:2,8 N/mm² x m/s Housing Ø:H7 Bushing inner-Ø after mounting:H9 Shaft tolerance:f7

COM-KU®/S is a self-lubricating and maintenance-free plastic plain bearing. However, additional lubrication is possible. It is well suited for simple applications and axial movements Support material/Carrier material:Plastic bearing produced in injection moulding process Static load:≤ 70 N/mm² Dynamic load:≤ 40 N/mm² Sliding speed:≤ 1,0 m/s Friction value:0,08 up to 0,20 µ Temperature strain:-50 up to +100 °C Max. PV-value:0,6 N/mm² x m/s Humidity absorption:0.1 % at 20 °C in 24 h Housing Ø:H7 Bushing inner ø after mounting:E10 Shaft tolerance:h - tolerance (recommended h9)