Produse pentru mingoda (1478)

Ball Valves - Flange ball valve KS76.3MD

Ball Valves - Flange ball valve KS150 / KS300 (ASME / ANSI)

Ball Valves - 3-pc-stainless steel ball valve type KM_ 3-tlg.-

Ball Valves - Flanged ball valve KS180

Ball Valves - Flange ball valve KS76.3MD

Ball Valves - Flanged ball valve KS180

Ball Valves - Stainless steel block ball valve GE5

Sprocket Wheel Rollers With Square Rods - SPECIAL ROLLERS (GST)

Development structure is available from 1,050 to 1,400 mm (42” to 55”) Maingate structure is available from 1,400 – 2,000 mm (55” to 78”) Supplied complete with garland or fixed frame idlers Suitable for floor or roof mounting Dimensions: Available as development and maingate structure Belt widths from 1,050 – 2,000 mm (42” to 78”)

Sideguide Rollers - SPECIAL ROLLERS (GST)

Excellent roundness and balance reduces vibration and ensures quiet operation and extended roller life Dimensions: Roller diameter 127-194 mm (5 to 7-5/8”) Shaft diameter up to 60 mm (2-3/8”) Bearing 6305, 6306, 6307, 6308, 6309, 6310

Available as frames only or fitted with rollers as idlers We supply trough carry, impact, training, and disc return fixed frames in a wide range of sizes for belt widths from 350 mm to 3,500 mm (14″ to 138″) Frames are either galvanized or with a painted surface finish All our frames provide minimal gaps between rollers and are designed to counteract material build-up Our frames are designed to maintain an optimum conveyor belt profile for low rolling resistance, excellent belt support, good belt guidance and long belt life

Wide range to meet even the toughest demands includes a standard range for compact light duty and medium duty pulleys as well as engineered class pulleys for heavy duty applications Available in all sizes with masses up to 45 tonnes as drive, tail and bend pulleys Advanced design process incorporating Finite Element Analysis ensure the pulleys are designed to world’s best practice Dead-shaft, wing and deflection wheels for high angle conveying are also available

A flow formed roller shell and hollow formed shaft Option for an increased wall thickness at the middle of the shell for reduced shell deformation and increased fatigue life Extremely low TIR with a accurate and constant shell thickness significantly reduces vibration and increases service life Dimensions: Roller diameters 159 – 219 mm (6-1/4” to 8-5/8”) Shaft diameters up to 82 mm (3-1/4”) Bearings 6308, 6310, 6312

With over 12million units sold globally, the GUP Series is our most popular roller offering the best value for money in light and medium bulk materials handling. We’ve been manufacturing GUP rollers since 1980, using a fully automated production line that guarantees GURTEC’s German engineering quality in every roller, with the shortest lead times in the market.

La vanne à boisseau 6R est équipée de notre actionneur compact électrique et grâce à ses faibles dimensions, elle constitue la solution idéale pour le montage peu encombrant. Elle est prévue pour une utilisation à long terme. Actionneur actionneur:Actionneur électrique

Belt-tracking Rollers - SPECIAL ROLLERS (GST)

Der pneumatische Schwenkantrieb sorgt für eine zuverlässige Steuerung des Kugelhahns 6L. Der Kolbenantrieb ist kompakt und wartungsfrei und kann mit allen neutralen, gasförmigen Medien betrieben werden. Standardmäßig ist der Antrieb federrückstellend. Antrieb:Schwenkantrieb

Diabolo Rollers - SPECIAL ROLLERS (GST)

Die Bauwagen der Baureihe RASANT sind Schnellläufer-Bauwagen mit einer Zuggeschwindigkeit von 80 km/h bzw 100 km/h. RASANT Bauwagen gibt es als Einachser, Zweiachser oder mit Tandemfahrgestell. Sie sind gefedert und verfügen über eine Auflaufbremse beziehungsweise bei Zweiachsern auch Druckluftbremse. Bei den Einachsern stehen Aufbaulängen von 2,0 bis 6,0 m zur Verfügung, bei den Tandemachsern von 4,0 m bis 7,0 m und bei den Zweiachsern von 4,0 m bis 8,0 m. Die Aufbaubreite beträgt 2,20 m, 2,40 m oder 2,50 m. Schnellläufer, 80 km/h oder 100 km/h 1-achsig, 2-achsig oder mit Tandem-Achse mit DIN-Zugöse, Kugelkupplung oder höhenverstellbarer Auflaufeinrichtung Aufbaulängen: - Einachser von 2 m bis 6 m - Tandemachser von 4 m bis 7 m - Zweiachser von 4 m bis 8 m Aufbaubreite 2,20 / 2,40 oder 2,50 m Runddach

Stub Rollers - SPECIAL ROLLERS (GST)

This ball valve is the ideal partner wherever aggressive gases and liquids have to be safely and reliably shut-off, isolated, mixed or distributed. It is light and compact and also has a good flow rate, even with soiled media. The shut-off body consists of a ball with a hole drilled through it. When the valve is open the entire cross-section is clear. A special mounting system makes it easy to assemble the ball valve in the desired location. Our ball valve is also available on request in the bulkhead version. Media:Gases and fluids

Conical Rollers - SPECIAL ROLLERS (GST)

Our garland rollers are connected to each other with flexible links and fixed to the conveyor frame with suspension links Free movement in the direction of the belt travel has also a positive influence on the self-centering of the belt easy to replace by lifting the idler set from the mounting hook

Positive action training frames in all configurations Side guide rollers orientate the frame and help ensure the belt tracks centrally on the conveyor Dimensions: Available in all configurations for both carry and return frames Positive action helps keep the belt aligned with the center of the conveyor

Le valvole a sfera multiport 6X con azionamento orientabile pneumatico (STANDARD) sono composte da due valvole a sfera a più vie collocate una sopra l'altra su due livelli in un alloggiamento dalla struttura compatta. Tra i due singoli livelli non esiste nessun collegamento del flusso. Mediante una commutazione entrambi i flussi dei fluidi vengono distribuiti o raccolti sincronicamente tramite un albero comune. Una miscelazione accidentale dei flussi dei fluidi è esclusa. Pressione di comando:6 bar

L'actionneur pneumatique garantit une commande fiable de la vanne à boisseau 6L. L'actionneur à piston est compact et ne nécessite aucune maintenance ; il peut être exploité avec tous les fluides neutres, gazeux. L’actionneur est en série à rappel de ressort. Actionneur:Pneumatique

La vanne à boisseau multiport 6X avec actionneur pneumatique (STANDARD) est composée de deux voies, aménagées de manière compacte dans un boîtier, l'une au-dessus de l'autre. Toute communication entre les deux niveaux est impossible. Un cycle permet de distribuer ou de collecter en synchronisation les deux courants par l’intermédiaire d’un arbre commun. Tout mélange intempestif des courants est impossible. . Toute communication entre les deux niveaux est impossible. Un cycle permet de distribuer ou de collecter en synchronisation les deux courants par l’intermédiaire d’un arbre commun. Tout mélange intempestif des courants est impossible. Pression de commande:6 bar

increases friction between the belt and the surface of the pulley improves efficiency and guidance helps prevent material building up on the surface of the pulley protects the shell of the pulley from wear provides a wear surface that can be replaced economically Lagging materials for drive and non-driven pulleys: HP142 – Hot vulcanized rubber lagging HP144 – Cold bonded rubber lagging HP145 – Hot vulcanised ceramic lagging HP146 – Cold bonded ceramic lagging HP147 – Hot cast urethane lagging HP148 – Cold bonded urethane lagging HP149 – Direct bonded ceramic lagging

Block Body Ball Valves with SAE Flange Adapters BBV22/BBV23 ▪ Two-way high-pressure block body ball valves designed for use as on/off devices for hydraulic applications ▪ With standard and extended SAE split flange connectors according to ISO 6162-1/2 and SAE J 518 C ▪ Pressure range: up to 420 bar / 6000 PSI (depending on size and material combination of the ball valve) Please note: The final maximum working pressure is determined by flange and pipe/tubing rating. Forged Body Ball Valves with SAE Flange Adapters FBV22/FBV23 ▪ Two-way high-pressure forged body ball valves designed for use as on/off devices for hydraulic applications ▪ With standard and extended SAE split flange connectors according to ISO 6162-1/2 and SAE J 518 C ▪ Pressure range: up to 420 bar / 6000 PSI (depending on size and material combination of the ball valve) Please note: The final maximum working pressure is determined by flange and pipe/tubing rating.