Produse pentru mepilex border (4)

Sigma Piles

Système de volets persiennes battantes à lames fixes ou orientables. Ces lames peuvent être actionnées manuellement ou être motorisées.

PROTEX is an excellent quality emulsion paint for interior and exterior use, with great hiding power and exist the 10 basic colour. It’s suitable for the colour mix of plastic and acrylic paints. It’s suitable for plaster, concrete, bricks and wood. It has great working and levelling properties, strong adhension and quick drying. It gives a beautiful mat finish. Information: Emulsion paint based on P.V.A-VEOVA copolymer. Applycating with brush, roller or airless and thinning with 5-10% clean water. The spreading rates are 9-12m²/Lt. on previously prepared surfaces. It drying normally on touch after 1-2 hours and recoatable after 3 hours. Times make different under cold or dump conditions PACKAGE:0,17 LT, 0,375 LT, 0,75 LT, 10 LT, 3 LT COLOR:Black, Blue

In the injection moulding process TPE pellets are fed into the machine through a hopper and then into a heated barrel. The heat from the barrel turns the material into a liquid resin which is then injected into a closed mould under high pressure. After allowing the molten polymer to cool, the finished part can be removed from the mould. Injection moulding is a high-volume, high tooling cost process, the advanced properties of our TPE compounds deliver short cycle times allowing parts to be produced at a rapid rate. The information below is intended as a general overview, settings may vary depending on the specific grade selected. Please CONTACT US for detailed processing information Settings Equipment Conventional injection moulding machine Compression set At least 2:1. Special screws with short sections and higher compression ratios (3:1 to 4:1) may be good at low screw speeds Shrinkage Between 1.0% and 2.5% depending on the grade, type of application and location of the gate. Moul