Produse pentru materii prime cu (47)

Rodac Petri Dish - Rodac Petri Dish PRODUCT CODE:002R Sterile:Gamma-R Raw Material:Polystyrene Barcode Number:8682009086029 Catalog number:MK.02.029

Low-Density Polyethylene (LDPE) that has been recycled and processed to create a GREY material. This material maintains the durability and flexibility of standard LDPE while promoting sustainability by utilizing post-consumer recycled content. It is certified by EUROCERT and meets PCR (Post Consumer Recycle) and GRS (Global Recycled Standard) standards.

Surfeco® PS 12 is a silicone-based spreading & penetration agent that greatly reduces surface tension. It shows a great hydrolytic stability over a wide pH range (2-12). The surface tension of 0.1% Surfeco® PS 12 aqueous solution was obtained as 27 dyn / cm. It has been determined that keep stable this performance in the pH range of 2-12. Increases the uptake of active ingredients Increases the leaf coverage/ stomata flooding Promotes spray volume reduction Enhances the efficacy of fertilizers or pesticide in the field Applicable to many products thanks to wide range pH stability (2-12) It is recommended to use up to %2-5% as an IN-CAN adjuvant to pesticide or fertilizer formulations. It is recommended to decide after laboratory tests for optimum dosage and compatibility.When considering the use of any Latro’s products in a particular application, you should review our latest Safety Data Sheet and ensure that the use you intend can be accomplished safely. Appearance:Light yellow / light brown liquid Solid Content at 160°C:87±2 Ionic Character:Weak Cationic

Raw Material: PP 750 ML Width:10 cm Height: 6 cm Length: 17.5 cm Grammage:29 g

90x15mm Compartmented Petri Dish - 90mm Two Compartmented Petri Dish PRODUCT CODE:064R - 064A Sterile:Gamma-R / Ebeam / Aseptic Sterile Raw Material:Polystyrene Barcode Number:8682009086067 Catalog number:MK.04.067

Composition:Polyoxyethylene polyoxypropylene block copolymer Disperlat® SC 46 is a block copolymer nonionic surfactant with relatively nontoxic Agrochemical formulations: Dispersing, wetting and compatibility agent for SC formulation as well as multipurpose emulsifier for EC formulation. Industrial formulations: Emulsifier, dispersing, wetting agen Enhance the dispersion and suspensiblity in water Rheology control When considering the use of any Latro’s products in a particular application, you should review our latest Safety Data Sheet and ensure that the use you intend can be accomplished safely. For Safety Data Sheets and other product safety information, contact the Latro’s Sales Office nearest to you. Before handling any other products mentioned in the text, you should obtain available product safety information and take the necessary steps to ensure safety of use. Appearance:Pale yellow to yellow liquid Solubility:Soluble in water pH of (5% soln.):5.5 – 7.5 Cloud point (10% aq. soln.):28 – 32°C Moisture content (%):Maximum 1.0%

Texhydro® FLASH is a next generation textile enhancer which helps providing softness and slickness to fabrics and garments. Especially recommend, for its high affinity, for synthetic and blend fabrics.It provides no yellowing effect, extreme shear stability, pH- temperature stability and electrolyte stability. Texhydro® FLASH is water dispersible and it is effective when used three to four times lower compared to amino silicone fluids. Proovides natural softness to sentetics and the blends Does not change the fastness value at 160 degrees High durability and resistance No yellowing Extreme stability under finishing conditions Applicable in padding and exhaustion process Self-dispersible Can be blended directly into the textile finishing bath Easy to handle Texhydro® FLASH can be considered to be utilized in textile finishing in all synthetics, synthetic/cotton blends, wool and polyester fleece. It can also be used on cotton fabrics. Appearance Visual:Colorless/yellowish liquid Solid Content HE73 / 01, Mettler Toledo, 160°C.:70% Viscosity at 25°C LVDV-E 230, Brookfield:Max 10000 cSt

10 ul Inoculatıon Loops - Inoculatıon Loops PRODUCT CODE:010R Sterilized:Gamma-R Raw Material:Polyethylene Barcode Number:8682009086111 Catalog number:MK.08.111

60x15mm Petri Dish - Petri Dish PRODUCT CODE:001R - 001A Sterile:Gamma-R and Ebeam Raw Material:Polystyrene Barcode Number:8682009086005 Catalog number:MK.01.005

Low-density polyethylene, or LDPE for short, is a type of thermoplastic made from the monomer ethylene. Because it is reasonably translucent, flexible, and durable, this type of plastic is frequently used in film applications. It's also utilized in the manufacture of various flexible bottles and lids, as well as cable and wire applications. 1375 KG /PALLET:KG

Cossil® TMS 50 ID is a mixture of MQ resin and isododecane. It can be added directly in oil phase of the formulations. It offers good water repellency. Cossil® TMS 50 ID is suitable for many personal care products such as antiperspirants, deodorants, skin care, color cosmetic, sun care products. INCI Name: Isododecane (and) Trimethylsiloxysilicate Cossil® TMS 50 ID can be used in many products. Sun Care Products (sun care creams and lotions) Make-up Pruducts (foundations concealers etc.) Color Cosmetics Products (lipsticks, mascaras, eyeliners, eyeshadows etc.) Hair Care Products (hair sprays, hair styling products etc.) Fast drying due to the volatility of isododecane Good water repellency Excellent film former Provides long-lasting effect Does not give tackiness Gives smooth feel Reduces whitening effect in lotions Appearance:Clear to slightly hazy liquid Viscosity at 25°C:100 - 1000 cP Resin:50%

Covered Tissue Tracking Cassette PRODUCT CODE:015 Color:White-Blue-Yellow-Green-Pink Raw Material:Polyacetal Barcode Number:B: 8682009086364 M:8682009086807 S:8682009086814 Y:8682009086821 P:8682009086562 Catalog number:B: PK.01.364 M: PK.01.807 S: PK.01.814 Y: PK.01.821 P: PK.01.562

100 ml Urine Container - Urine Cup PRODUCT CODE:022A - 022N - 022G Sterilized:Aseptic, Non-sterile and Gamma-R Raw Material:Polypropylene Barcode Number:8682009086197 N:8682009086180 G:8682009086203 Catalog number:A: NK.16.197 N: NK.16.180 G: NK.16.203

16x100 Bottom Conical Tube / 10 ml Product Code:014PS-014PP Raw material:Polystyrene - Polypropylene Barcode Number:8682009086128 - 8682009086173 Catalog Number:NK.01.142NK.04.128 - NK.03.173

90x15mm Petri Dish - 90mm Petri Dish PRODUCT CODE:005R - 005A Sterile:Gamma-R /Ebeam / Aseptic Sterile Raw Material:Polystyrene Barcode Number:8682009086043 - 8682009086050 Catalog number:MK.03.043

Linear Low-Density Polyethylene (LLDPE) Compound, Flexible, High Strength, Puncture Resistant, Film Extrusion, Blown Film, Stretch Wrap, Copolymer, High Clarity, Impact Resistance, Seal Strength, Toughness, Versatility, Industrial Packaging, Agricultural Film, High Tensile Strength

16*85 Polypropylene Tube Product Code:033 Raw material:Polypropylene Barcode Number:8682009086531 Catalog Number:NK.09.531

16x100 Round Bottom Tube / 10 ml Product Code:014PS - 014PP Raw material:Polystyrene - Polypropylene Barcode Number:8682009086128 - 8682009086135 Catalog Number:NK.04.128 - NK.04.135

Nova HC 17041 is a low-viscosity macro emulsion of a high molecular weight silicone fluid. especially for fabric softeners. Nova HC 17041 improves the properties when combined with conventional laundry products. Improves the properties of the fabric softeners. Easy to mix Improves the softening efficacy Increases hydrophilicity of fabrics Significantly improves the ironing properties. Nova HC 17041 is suitable for combining with the following products to improve performance. 2 in 1 Liquid detergent Fabric softeners Laundry conditioners Easy ironing spray Appearance:Milky liquid Solid Content:45 – 50% Solubility:Soluble in water Ionic character:Slightly cationic pH at 25 °C:6-8

Texamin® RUSTIC is a textile softener low-viscosity macro emulsion of a high molecular weight silicone fluid. Texamin® RUSTIC can be used for all natural and synthetic fiber mixtures, and is effective on a variety of woven or knit fabrics whether prepared by ring or opened spun yarns. Texamin® RUSTIC imparts a super soft and smooth hand, giving a slippery effect. Soft, silky handle High surface smoothness Improves the crease recovery Compatible with resin finishing agents Improves the sewability Color intensifying properties Compatible with resins Improves wash and wear properties Pre-dilute with cold water on a ration between 1:2 to 1:4. You can adjust the pH with acetic acid before adding the diluted Texamin® RUSTIC to the application. Complete foulard will then take place and the solution will be clear. Dry at 120 to 180°C (248 to 356°F) for 30 to 60. Appearance Visual:Milky liquid Solid Content (%) HE73 / 01, Mettler Toledo, 160°C.:43-48% Solubility:Soluble in water Ionic character:Slightly cationic pH at 25 °C pH 7110, Inolab, at 25°C.:6-8

12x75 Test Tube / 5 ml / PS Product Code:012PS - 012PP Raw material:Polystyrene - Polypropylene Barcode Number:8682009086142 Catalog Number:NK.01.142

Buffer Tube / 5 ml Antigen Tube with Drops Product Code:046 Raw material:Polyethylene Barcode Number:8682009086784 Catalog Number:NK.10.784

1.5 ml Eppendorf Tube Product Code:065 Raw material:Polyethylene Barcode Number:8682009086579 Catalog Number:NK.14.579

Maxant® WORK is a highly effective silicone antifoam emulsion. It offers excellent foam control and high stability in various foaming systems. Maxant® WORK is stable under extreme condition with low concentrations. Maxant® WORK is suitable for fully-synthetic working fluids and emulsion type working fluids Permanent foam cut off Rapid foam knock-down Long durability in acidic and alkaline conditions Outstanding durability at low add on levels Excellent foam control Keep the initial performance Shear Stability Maxant® WORK is mainly designed for preventing foam in process applications. Maxant® WORK can be added directly into the foam solution. 1-20ppm is suitable for application. Appearance Visual:Milky white liquid Solid Content (%) HE73 / 01, Mettler Toledo, 160°C.:31-35% Ionic character:Nonionic Viscosity at 25°C LVDV-E 230, Brookfield:1000 - 3000 cp

Buffer Tube Set 2 / 5 ml Antigen Tube with Drops Product Code:055 Raw material:Polyethylene Barcode Number:8682009086753 Catalog Number:NK.10.753

200 ml Sample Container Product Code:027A - 027N Sterile:Aseptic and Non-sterile Raw material:Polypropylene Barcode Number:A: 8682009086395 N:8682009086388 Catalog Number:A: NK.19.395 N: NK.19.388

500ml Water Sample Bottle Product Code:030 Feature:A - O: No Thiosulphate. AT-OT: There is thiosulfate Raw material:Polypropylene Barcode Number:A: 8682009086289 AT: 8682009086302 O: 8682009086272 OT:8682009086296 Catalog Number:A:NK.22.289 AT:NK.22.302 O:NK.22.272 OT: NK.22.296

Maxant® PRO is a highly effective silicone antifoam emulsion. It offers excellent foam control and high stability in various foaming systems. Permanent foam cut off Stable effects during storage period Rapid foam knock-down Foam inhibition in extreme temperatures (up to 95 °C) Long term foam inhibition Compatibility with wetting agents Long durability in acidic and alkaline conditions Outstanding durability at low add on levels Maxant® PRO is mainly designed for preventing foam in process applications. For process applications, we recommend prediluting Maxant® PRO silicone antifoam with cold water in a ratio of 1:1 to 1:10. Appearance Visual:Milky white liquid Solid Content (%) HE73 / 01, Mettler Toledo, 160°C.:20-25% pH at 25°C pH 7110, Inolab:7-8 Ionic character:Nonionic Viscosity at 25°C LVDV-E 230, Brookfield:1000-1500 CP

2,000 ml Pet Water Sample Bottle BOX SIZE:30*55*60 PACKAGING:30pcs/Pe bag, 30×1pcs/carton

Saliva Saliva Test Container Product Code:060 Raw material:Polyethylene Barcode Number:8682009086555 Catalog Number:NK.11.555