Produse pentru masini (94)

Mesh Spider is the lifting equipment to move electrowelded mesh panels which, thanks to its innovative patented hiding guns, can hook mesh bundles from the inside. Due to its automatic hooking and releasing device Mesh Spider can move one or more mesh bundles in a fast and safe way resulting in room saving as the bundles can be stocked one next to the other. Thanks to its reduced dimensions, it can be used with both a crane or a forklift. Available version MESH SPIDER 46 m INT it is able to hook from the inside mesh bundles with 3 picking points. Max. lifting weight:6000 kg (13200 lb) Mesh length:4÷6m (13'÷20') Mesh bundle height:150÷700 mm (8"÷28") Min. Cross wires distance:150x150 mm (6"x6") Picking points:3

Bidirectional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cuttosize bars using wires up to Ø 28 mm (#8). Driven by digital electric servomotors. Bar Wiser 28 bar shaping machine is equipped with Max. pulling speed 180 m/min (600 ft/min) 2 bending units (upper and lower) Clamp for extraction of the end part of the bar Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) Bar Wiser 28 Pack 0 Storage rack pneumatically operated. Processed wire type:Bar Single strand:1 Ø 8÷28 mm (#8) Double strand:2 Ø 8÷20 mm (#6) Pulling speed:180 m/min (600 ft/min) Bending speed:574°/sec Average power consumption:3 kWh

Automatic bar bending machine for the production of shapes with positive bends (“L”, “C” and double “C”), up to Ø 40 mm (#11). Device for the production of "bottlenecks“. Automatic system for bars feeding and discharging. Bending speed:35-54°/sec Average power consumption:1 kWh

Stirrup bender and bar shaping machine from coil with disk bending system for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 16 mm (#5). Driven by electric servomotors. This automatic shaping and stirrup bender from coil is equipped with Max. pulling speed 140 m/min (460 ft/min) HS Version 200 m/min (660 ft/min); Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick; Disk bending unit; Cutting with Brushless motors; Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades; Web Teleassistance. The 'bridge' version (Opera 16 Bridge) is suitable for accepting an optional mobile carriage which allows collecting and classifying the manufactured stirrups and rebars. Processed wire type:Coil Single strand:1 Ø 6÷16 mm (#5) Double strand:2 Ø 6÷13 mm (#4) Pulling speed:140 m/min (460 ft/min) Bending speed:1900°/sec Average power consumption:9 kWh

Mesh Spider is the lifting equipment to move electrowelded mesh panels which can hook mesh bundles from the outside. Due to its automatic hooking and releasing device Mesh Spider can move one or more mesh bundles in a fast and safe way resulting in room saving as the bundles can be stocked one next to the other. Thanks to its reduced dimensions, it can be used with both a crane or a forklift. Available version MESH SPIDER 46 m EST it is able to hook from the outside mesh bundles with 3 picking points. Max. lifting weight:6000 kg (13200 lb) Mesh length:4÷6m (13'÷20') Mesh bundle height:150÷700 mm (8"÷28") Picking points:3

Electromechanical automatic rebar cutting bench with 6 transfer roller conveyors. The cutting bench 'BAT 6' represents the ideal solution for those working large numbers of smallsized orders and it is especially designed for civil housing. Thanks to 6 different chambers optimise processing of small orders even without the transfer unit. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance. Cuts per minute:30 Pulling Speed:115 m/min (380 ft/min) Pulling Speed (Brushless):160 m/min (530 ft/min) Average power consumption:3 kWh

Fast automatic wire straightening and cutting machine, with rollers, for the production of cuttosize wires up to Ø 16 mm (#5). Driven by digital electric servomotors. Max pulling speed 240 m/min (790 ft/min) Straighteners (horizontalvertical) with electronic setting Rollers for the extraction of the last part of the coil (Optional) Automatic 6inlets motorized wire change and insertion unit (Optional) Patented motorized horizontal wire change unit which allows to change the diameter and the coil in "Zero time" (Optional) Web Teleassistance Single strand:1Ø 8÷16 mm (#5) Double strand:2Ø 8÷13 mm (#4) (OPTIONAL) Pulling speed:up to 240 m/min (790 ft/min) Average power consumption:20 kWh

Automatic wire straightening and cutting machine, with rollers, for the production of cuttosize wires up to Ø 13 mm (#4). Driven by digital electric servomotors. Capacity 2 Ø 10 mm (#3) Max pulling speed 150 m/min (495 ft/min) Straighteners with independent position and adjustment displays for the wires Cutting with Brushless Motorized wire change unit Web Teleassistance Single strand:1 Ø 5÷13 mm (#4) Double strand:2 Ø 5÷10 mm (#3) Pulling speed:150 m/min (500 ft/min) Average power consumption:4 kWh

Dualdirection bar bending machine with threespeeds selfbraking motor driven by inverter. The machine doesn't pull the bars during bending operations. The equipment is driven by a selfbraking motor. Electronic digital programmer mod. 'KS31' which allows Programming stirrups and shapes with up to 30 bends; Adjusting bending angles; Storing up to 50 different shapes. Plate revolving speed:5-7,5-10 Installed power:5,5 kW Machine's weight:815 kg (1800 lb) Machine dimensions:157x110x108(h)cm (62"x43"x42"h)

Automatic steel ring bending machine for the production of circles, spirals and radius bars for diameters from Ø 6 mm (#3) to Ø 40 mm (#14). The machine uses a system of 4 rollers, one of which is specifically to ensure the stability and consistency of the radius of the curve. The rebar combined machine CER40 can be programmed to produce automatically up to 5 different radius curves on the same bar thanks to the measuring system. Bending capacity:6÷40 mm (#3÷#14) Min bending radius:25 cm (10") Plate revolving speed:13-42 rpm Installed power:7.8 kW Machine's weight:780 kg (1700 lb) Machine dimensions:138x82x95(h)cm (55"x32"x37"h)

Thanks to its innovating system, SBL takes, counts and moves the bars for shearline feeding in a completely automatic way. With SBL you save money and enhance productivity due to its flexibility. Advantages 1. ‘SBL’ is extremely fast so it can feed more bars compared with manual feeding. The result is higher productivity per hour for any kind of shear line. 2. No need of hard and dangerous bar handling so no need of people for such operation resulting in great money saving. 3. The elimination of manual bar feeding enhances security at job site. 4. “SBL” special structure makes it possible to feed shearlines with higher a number of bars of different diameter and length resulting in a. drastic reduction in machine setup; b. plant overall dimensions determined by clients’ room available; c. higher flexibility of the plant.

Automatic mesh bending machine, equipped with double gearmotor, fast fitting pins. It is equipped with Reinforced framework; Bending pin holder; Adjustable mobile bending bar (minimum length 70 mm); 'KS31' electronic digital programmer which allows adjusting bending angles. Max. Mesh length:4 m (13') Working capacity:20 Ø 12 mm (#4)

Rebar shearing machine for fast bars cutting. Cutting antirepetitiveness system. Capacity 1 bar Ø 32 mm 90 cuts/minute Cuts per minute:30 Installed power:2.2 kW Machine's weight:330 kg (730 lb) Machine dimensions:53x92x72(h)cm (21"x36"x28"h)

Stirrup bender and bar shaping machine from coil with 2 bending heads, allows to produce stirrups and shaped wires with bends at both ends using wires up to Ø 25 mm (#8). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 160 m/min (525 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit Automatic motorized wire change Automatic adjustable wireguide Web Teleassistance Prestraightening Feeding Unit (Optional). Processed wire type:Coil Single strand:1 Ø 10÷25 mm (#8) Double strand:2 Ø 10÷20 mm (#6) Pulling speed:160 m/min (525 ft/min) Bending speed:585°/sec Average power consumption:10 kWh

Coil Mover is a safe and compact clamp for unloading trucks and handling coils in the factory. Thanks to its innovative shape, it allows the hooking of the rewinded coils from the inside. Coil internal diameter:550÷900 mm (22"÷35") Max. lifting weight:5000 kg (11000 lb)

Rotor type wire straightening machine for the production of cuttosize wires up to Ø 8 mm (0.315 in.). Driven by digital electric servomotors. Max pulling speed 160 m/min (525 ft/min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm). Fixed cut with automatic backstop length for a maximum cutting flexibility (± 0.5 mm). Rotating cut system with automatic measurement via encoder for higher productivity (± 0.5 mm/m). Single strand:1 Ø 3÷8 mm (0.315 in.) Pulling speed:160 m/min (530 ft/min) Average power consumption:4 kWh

The rotor type wire straightening machine RI 12 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 4mm to Ø 12mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market. Available versions RI 12/ML The manual setting of the mechanical lengthstop will enable processing wires with a bar length accuracy of ±0,1 mm. This newly designed contactless lengthstop enables to action the cut without the conventional

Ring bending machine for rings of unlimited radius (rib rings) and spirals. Driven by a variablespeed electric motor min 20; max 30 rpm. Adjustable bending radius from a minimum 15 cm (with small diameters) and over. For Ø 6 mm (#3) Ø 32 mm (#10) wires. Bending capacity:6÷32 mm (#3÷#10) Plate revolving speed:20-30 rpm Installed power:1.8 kW Machine's weight:320 kg (705 lb) Machine dimensions:80x70x94(h)cm (31"x28"x37"h)

Bidirectional automatic stirrup bender for the production of stirrups and shaped wires both from bars (up to Ø 22 mm #7) and from coils (up to Ø 16 mm #5). The lower bending unit performs downward bends. Driven by electric servomotors. These automatic stirrup benders are equipped with Max. pulling speed 100 m/min (330 ft/min) External and internal straightening unit Semiautomatic cycle for shaped wires with bends on both ends Barholding clamp for downward bends Virtual mandrel for the upper processing unit Web Teleassistance Processed wire type:Coil Pulling speed:100 m/min (330 ft/min) Bending speed:685°/sec Average power consumption:2 kWh

Stirrup bender and bar shaping machine from coil with 2 bending heads for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 16 mm (#5). Driven by electric servomotors. Also available HS version machine. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 140 m/min (460 ft/min) HS Version 200 m/min (660 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick AntiTwist electronic device (Optional) Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit (upper and lower) 4 pulling drive wheels Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance 3D version for the production of tridimensional pieces. Processed wire type:Coil Single strand:1 Ø 6÷16 mm (#5) Double strand:2 Ø 6÷13 mm (#4) Pulling speed:140 m/min (460 ft/min) Bending speed:1680°/sec Average power consumption:5 kWh

Automatic mesh bending machine, equipped with double gearmotor, fast fitting pins and switch for 3 mechanical programs. It is equipped with Reinforced framework; Bending pin holder; Adjustable mobile bending bar (minimum length 70 mm);

Four speed dualdirection bar bending machine. It doesn't pull the bars during bending operations. Driven by digital electric servomotors. Industrial PC equipped with touch screen graphic display 8'', which allows Programming stirrups and shapes with up to 30 bends; Adjusting bending angles; Storing up to 100 different shapes. Plate revolving speed:12 rpm Installed power:14 kW Machine's weight:1250 kg (2760 lb) Machine dimensions:157x104x87(h)cm (62"x41"x34"h)

The rotor type wire straightening machine RI 8 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 3mm to Ø 8mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market. Available versions RI 8/ML The manual setting of the mechanical lengthstop will enable processing wires with a bar length accuracy of ±0,1 mm. This newly designed contactless lengthstop enables to action the cut without the conventional

Stirrup bender and bar shaping machine from coil with 2 bending heads for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 20 mm (#6). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 140 m/min (460 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick AntiTwist electronic device (Optional) Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit (upper and lower) Pulling with 4 motors and 4 pulling drive wheels Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance Prestraightening Feeding Unit (Optional) Automatic motorized wire change (Optional) 3D version for the production of tridimensional pieces. Processed wire type:Coil Single strand:1 Ø 8÷20 mm (#6) Double strand:2 Ø 8÷16 mm (#5) Pulling speed:140 m/min (460 ft/min) Bending speed:840°/sec Average power consumption:8 kWh

Machine for the assembly of the (EPS) polystyrene sheet shaped to two external electrowelded mesh. The assembling machine welds the vertical connectors to the two external mesh, producing the prefabricated sandwich panel. This way it is possible to produce all types of insulated panels single panels, double panels and floor panels of different thicknesses, ideal for the construction of residential, commercial and industrial buildings.

Electromechanical mesh cutting machine. It cuts in two directions thanks to the two kW 3 cutting motors, a kW 0.75 press motor and a kW 0.55 feeding motor. It is equipped with Reinforced framework; Continuous shear cutting unit; Rubber inlaid meshpressing beam.

Electromechanical automatic bar cutting bench with 5 transfer roller tracks and a second additional rebar conveyor. Thanks to the second transfer track, parallel to the cutting unit, cutbars can be placed along the whole length of the roller track optimizing the use. This means that the same roller track can be used to store different orders. Basically, it is as if you had a much greater number of roller tracks allowing a better cutting optimization thus reducing the quantity of scraps. The bar cutting bench "OPTIBAT 5" represents the ideal solution for those working large numbers of smallsized orders and it is especially designed for civil housing. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance. Cuts per minute:30 Pulling Speed:115 m/min (380 ft/min) Pulling Speed (Brushless):160 m/min (530 ft/min) Average power consumption:3 kWh

Electromechanical automatic rebar cutting bench with 3 transfer roller conveyors. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance. Cuts per minute:30 Pulling Speed:115 m/min (380 ft/min) Pulling Speed (Brushless):160 m/min (530 ft/min) Average power consumption:3 kWh

Cage making machine for the production of cylindrical cages with variable pitch welded spiral wrap; max cage Ø 1100 mm. High productivity and flexibility is guaranteed by the configuration of the machine and by the fully automatic welding unit SAF 3000. With the machine to produce cylindrical poles CM PRO 1100 is also possible to produce on the machine square or rectangular cages and cages with the bars bent on the end (90 °bends, bottle necks and pointed). Min. cage Ø:200 mm (8") Max cage Ø:1100 mm (43") Max cage's weight:3 t (6600 lb) Max cage's length:16 m (52') Wire spiral Ø:6÷16 mm (#3÷#5) Spiral pitch:0÷500 mm (20") Longitudinal bars Ø:12÷32 mm (#3÷#10) Average power consumption:5 kW/h

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 36 mm (#11) Plate revolving speed 8 RPM Plate revolving speed:8 rpm Installed power:2.2 kW Machine's weight:387 kg (850 lb) Machine dimensions:80x89x86(h)cm (31"x35"x34"h)