Produse pentru masini (477)

Machine features Clamping force 3,100 kN. Size of the platens 550 x 550 mm. Injection volume 1,000 cm³ or 2,000 cm³. The H59 is designed for Automated production. Injection molding (more or less simple parts). Low floor space and height requirement. Optimized cycle time. etc. Closing:horizontal Operation :hydraulic Treated material:for elastomers, for rubber, for liquid silicone rubber Clamping force :3100kN

Designed for the manufacture of highvoltage insulators (550 kV), this press is one of the largest presses made by REP. The dimensions of the parts to be injected explain the huge size of the press 660 mm in diameter, 2,600 mm long, moulded in one go. The production of a complete insulator is therefore performed in one or two cycles, thus significantly increasing the profitability and reliability of the parts. Machine features Closing force 24,000 kN Size of the platens 1,500 x 3,000 mm Injection volume 25,000 cm³ x 2 (2 injection units) Closing:Vertical Clamping force:24 000kN Platen dimensions:1 500 x 3 000 mm Injection volume:: 25 000 cm³ x 2 (2 injection units)

Machine features Clamping force 500 kN. Size of the platens 300 x 300 mm. Injection volume 125 cm³. closing:Vertical Operation:Hydraulic Treated material:for rubber Clamping force:500kN

This press is intended for rubber overmolding of cables used for stone cutting. The cables must be positioned in the mould in the stretched position, and over moulding takes place successively in the jog mode. The “CFrame” design with a closing force of 1,000 kN has been tailored to these presses, because this technology gives access to all sides of the mold, what is essential for the successful finalization of this very special overmolding. Closing:Vertical Operation :hydraulic Other features:for parts with insert Clamping force :1000kN

Horizontal range H49, H59, H610 The range is designed for easy implementation of automated production processes, namely injection moulding of more or less sophisticated technical parts. Clamping force available from 1,950 kN to 4,000 kN. Shown above press types H49, H59 and H610 (with and without brush). Clamping force min:1950 kN Clamping force max:4000kN Closing:Horizontal

Type V510 Core 3,050kN G10 is the 10th generation of REP injection molding presses with two versions available, on the one hand the Lean range G10 Core and on the other hand the Performance range G10 Extended. The G10 Core is a machine line, which has been matched for less demanding processes. It features all major costoptimized functionalities and the expertise of REP. Closing:Vertical Clamping force:3 050kN

REP designs and manufactures injection moulding presses optimized for special applications, with one of them being the molding of bladders (open or closed) for the production of tyres. Clamping force from 8,000 to 22,000 kN. https//www.youtube.com/watch?v=7EOOJ7wB_us Closing:Vertical Operation :Hydraulic Clamping force:Min : 8 000kN Max : 22 000kN

Machine features Clamping force 1,100 kN. Size of the platens 335 x 400 mm. Injection volume 400 or 1,000 cm³ Closing:Vertical Operation :Hydraulic Treated material:for rubber Clamping force :1 100kN

In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs. Closing:Vertical Clamping force:6000kN Injection volume::2000 cm³ Other features:Fast-cycling, modular, for rapid production cycles, for gaskets

The Microject is a micromachine of a clamping force of 60 tons designed for the injection molding and overmolding of inserts used in small parts. Usability and flexibility. Plug and Produce! Characteristics MICROJECT LSR Maximum injection volume 3.77 (at 2000 bar) or 6.94 (at 1500 bar) or 10.37 (at 1000 bar). Clamping force 60 kN. Mould dimensions 150 x 100 mm. Overall dimensions 1.2 x 0.75 m. Simplicity and flexibility Installation in 30 minutes. Mould setting time optimally reduced. Intuitive touch screen interface. Clamping force:60kN Closing:Vertical Other features:for small parts

High technology range TurboCure®. The purpose of the Turbocure® solution consists in reducing the curing time by up to 50%. It includes the modules TempInverter® and FillBalancer®. They can be used together or individually depending on the application. This solution respects the integrity of the compound by focusing on improved quality. Display:Without display Type:programmable Use:for injection molding machines

TYC 22 Press The French company DubourgelGrange is renowned for the quality of its sanitary product range. The factory has fully automated "REP Tung Yu" machinery equipped with handling units and robots (loading and unloading), which operate in 3 shifts for the major part 7 days a week. These machines are used to produce highend toilet covers and seats made in thermoset resin (ureaformaldehyde). Clamping force:5000 kN Platen dimensions:800 mm x 800 mm

The CMX (Compact Multi Station of the generation 10) This new machine replaces the former CMS generation and makes the third generation of rotary machines with 2 major innovations. Integration of the processcontrol system of the latest generation (generation 10) with all 4.0 functions. Product range with the CMX1 (160T clamping force) and the CMX2 (250T clamping force). New generation of 4station molding machines The REP solution for large productions with optimal efficiency 90% increase in productivity compared with a singlestation press. 68% increase in productivity compared with a press equipped with a double plate stripping kit. The CMX machine is available with two clamping forces 160T (CMX1) or 250T (CMX2). Clamping force min:1600 kN Clamping force min:2500 kN Closing:Vertical Other features:fast-cycling, multi-component, modular, bi-material, for rapid production cycles

Type V410 Core 1,600kN G10 is the 10th generation of REP injection molding presses with two versions available, on the one hand the Lean range G10 Core and on the other hand the Performance range G10 Extended. The G10 Core is a machine line, which has been matched for less demanding processes. It features all major costoptimized functionalities and the expertise of REP. Closing:Vertical Clamping force:1 600kN

Machine features Specific pressure 500 kg/cm². Dimensions of the heating platens 1500 x 1500 mm. Minimum mould closing speed 0.03 mm/sec. Clamping force:20000 kN Platen dimensions:1500 x 1500 mm Type :compression

URP Joint venture United Rubber Machinery Strategic Alliance for Asian injection molding machine market between REP and LWB Steinl, Closing:Vertical Operation :Hydraulic Clamping force:1,600 kN, 2,600 kN, 3,000 kN, 5,000 kN

Type V710 Core 5,100kN G10 is the 10th generation of REP injection molding presses with two versions available, on the one hand the Lean range G10 Core and on the other hand the Performance range G10 Extended. The G10 Core is a machine line, which has been matched for less demanding processes. It features all major costoptimized functionalities and the expertise of REP. Closing:Vertical Clamping force :5 100kN

FROM THE NATURAL TO THE TRANSPARENT Our powerful and versatile CO2 laser engravers use a 10600nm wavelength in the infrared range, which provides a precise and permanent marking on a wide range of materials such as natural materials (wood, leather, paper, transparent material (glass, transparent plastics) and coated materials (painted surfaces, anodized aluminium). ECO-FRIENDLY SOLUTION FOR IDENTIFICATION MARKING Direct marking with CO2 laser engraver is a real alternative to stamping, inkjet or labelling in several fields. The CO2 laser works without consumables, unlike the other alternatives, so there is no need to replace ink or stop the laser head for maintenance. ONE SOLUTION FOR MARKING & READING With the efficient Vision Manager, identification of your parts is ensured. High-efficiency reading camera, easy to install, grade analysis and sending status information to the PLC are some of the features the module offers. Technique:CO2 laser source Configuration:For production lines Power:30 W X travel: 70 mm, 100 mm, 140 mm, 210 mm (3 in, 4 in, 6 in, 8 in) Y travel:70 mm, 100 mm, 140 mm, 210 mm (3 in, 4 in, 6 in, 8 in) Speed:10,000 mm/s

TOUCH & MARK The large color touchscreen and onboard control software make training a thing of the past. The intuitive system allows you to start marking text, logos and 2D codes straight away. Also metal plate engraving makes it the best engraving machine for metal. It makes the operator’s life easy and does not require a computer. I-SENSE DOT PEEN MARKING STATION The I-Sense function detects the surface of the workpiece, automatically adjusts the height of the Z-axis and starts marking with no intervention on the part of the operator. Several adjustment modes are available: automatic mode, programmable mode and normal mode, which allows manual adjustment. DYNAMIC DOT CONTROL Obtain a perfect result every time with the IMPACT DDC™ feature, a technology which enables automatic adjustment of point density according to the required size and depth of marking. Technique:electromagnetic, indent, dot peen, impact Material:metal, plastic, aluminum, for hardened materials, brass, for stainless steel Configuration:benchtop, manual Applications:data matrix, tubes, industrial, plates, pipe, bars, aluminum profiles, medical instruments... Other characteristics: compact, automatic, pneumatic, high-accuracy, semi-automatic, programmable, deep marking... X travel:100 mm (4 in) Y travel:120 mm (5 in)

L’air comprimé offre des avantages qui s’étendent bien au-delà de simples outils. Qu’il s’agisse d’applications courantes telles que le perçage, le tronçonnage ou l’ébavurage, ou d’outils spécifiques comme ceux dédiés au pansage, la technologie pneumatique fournit des caractéristiques inédites en matière de rapidité et de performance.

Le mariage de la technologie et de l’innovation donne naissance à nos porte-outils et fraises de carottage Hardcut. Idéaux pour les applications exigeantes, ils garantissent un perçage propre, rapide et efficace, même dans les matériaux les plus robustes.

Optimisez vos filetages internes avec notre variété de tarauds et leurs accessoires associés. De la conception standard aux besoins les plus spécifiques, notre sélection garantit une finition soignée et une durabilité exceptionnelle pour tous vos besoins de taraudage.

Pour un filetage externe impeccable, découvrez notre gamme de filières et leurs accessoires. Conçus pour offrir une précision sans faille et une résistance accrue, ces outils sont essentiels pour tout professionnel cherchant à réaliser des travaux d’usinage de qualité.

Le LS100 est un graveur laser CO2 compact, polyvalent et facile à utiliser pour le marquage et la découpe du bois, le gravage du verre, et bien plus encore. Solide et fiable, ce graveur laser est la solution idéale pour toutes vos applications. Environnement de travail unique La machine de découpe et de gravure laser LS100 est une solution haut de gamme : c'est le seul laser CO2 sur le marché fabriqué avec un châssis en aluminium monobloc, un logiciel CAD/CAM multi-technologies professionnel, et une source laser RF. Le couteau suisse des lasers Le LS100 est un graveur laser CO2 silencieux et compact, adaptable aux environnements de bureau, commerciaux et industriels. Il sert à la fois de machine de gravure d'étiquettes, de machine de gravure du bois, de graveur laser pour le verre, de découpeur laser, et bien plus encore. Ce laser CO2 s'adapte à tous vos besoins. Flux de travail rationalisé Que ce soit pour des unités uniques ou des petites/moyennes séries, le graveur laser CO2 LS100 améliore votre productivité avec des fonctionnalités conçues pour vous faire gagner du temps : réglage automatique de la hauteur de la table, tableau de contrôle intégré dans le laser, et un espace de travail bien éclairé avec une grande porte de chargement à l'avant.

Pour une coupe nette et une finition irréprochable, faites confiance à nos disques Abravaco. La garantie d’un résultat professionnel à chaque fois.

Presses à injecter économiques. Une unité d’injection REP sur un bâti de presse Tung Yu. Cette alliance de technologie offre de nombreuses possibilités : - Un boudinage et une injection séparés, grâce à l’unité d’injection de type «Y». - Une unité de fermeture à 2 ou 3 temps. - Une régulation proportionnelle en boucle fermée. - Un faible encombrement au sol et une ergonomie optimisée, grâce à sa conception modulaire.

SAFE No need for a bulky class 1 laser housing, the Mini-inline isolates the laser beam while the safety sensors make sure the part and Mini-inline are present: maximum laser engraver safety for the operator and his work environment. COMPACT Thanks to its size, the Mini-inline is easily added to your existing production line. It allows the integration of our industrial laser marking system in very narrow areas, to engrave the necessary information on a wide range of parts. COST-EFFECTIVE This accessory has the advantage of being cheaper than a class 1 laser protection housing: lower purchase price, and no pre-study cost for the final installation. In addition of the time saved installing the Mini-inline on the laser marker. Technique:Laser Suitable for:Large metal or plastic parts Compatible with:Fiber series (Fiber premium, standard and energy), Hybrid series, Green series Standard marking area:32 mm x 42 mm (1.26 in x 1.65 in) / Other dimensions on request

Augmentez votre efficacité en tournage grâce à nos accessoires de haute qualité. Des solutions adaptées pour toutes vos exigences en matière de tournage.

La presse compression TYC2RT permet une production de pièces moulées en caoutchouc, avec un moulage par compression ou une compression sous vide. La rentrée et sortie de 2 plaques avec une inclinaison de 45° de la plaque supérieure, convient pour différentes optionPresses de la série TYC de Tungyu Elles sont particulièrement adaptées pour mouler des joints toriques, des bouchons pharmaceutiques, des pistons de seringue, et de nombreuses autres pièces en caoutchouc. Elles se déclinent en 2 séries 2RT ou 3RT selon le nombre de plaques du moule. Dotées d'un système de fermeture à 4 colonnes avec un parallélisme de grande précision, leur course d'ouverture réglable permet différentes hauteurs de moule. Le système de cloche à vide réduit le temps de vulcanisation augmentant ainsi la productivité.

COMPACT The Fiber laser robust design and high-quality optical components guarantee high strength and low maintenance. Whether integrated on production lines or robotic cells, its implementation is simple in all mounting positions. The laser marker can be oriented to the part surface to significantly reduce installation times and costs. INDUSTRIAL Equipped to meet the needs of Industry 4.0 in terms of identification marking, the Fiber laser marker is equipped as standard with full network communication ports allowing full compatibility with all PLCs brands and ensure quick and cost-effective integration. POWERFUL This laser marking machine is available in several powers, 20W, 30W and 50W. The 20W laser head is adapted for most of the applications for a surface marking, 30w is the solution for your fast and high-contrast markings, and 50W is the most suitable solution for deep laser markings. Technique:Fibre laser source Configuration:For production lines Power:20 - 30 - 50 W X travel:65 mm, 110 mm, 175 mm, 205 mm (3 in, 4 in, 7 in, 8 in) Y travel:65 mm, 110 mm, 175 mm, 205 mm (3 in, 4 in, 7 in, 8 in)