Produse pentru masini (522)

Stanzen-Ziehen-Schweißen-Polieren-Montieren Herstellung von Stanz, - Biege- und Tiefziehteilen aus metallischen und nichtmetallischen Werkstoffen - Folgearbeitsgänge Gewindeschneiden, Bohren, Montieren und Polieren

Stanzen-Ziehen-Schweißen-Polieren-Montieren Herstellung von Stanz, - Biege- und Tiefziehteilen aus metallischen und nichtmetallischen Werkstoffen - Folgearbeitsgänge Gewindeschneiden, Bohren, Montieren und Polieren

HF-dichte Prüfkabine zur Prüfung von Mittelspannungssteckern Kabinenteile aus verzinktem Blech - Bleche schwimmend gelagert mit HF-dichtem Wabenfilter als abgedichtete Lüftungsabdeckung Kabinenfilter für Stromdurchlass Zutrittstür mit geschirmter Polykarbonatscheibe HF-dichte Schiebetür Maße variable Maße nach Kundenwunsch Abbildung Musterkabine (4000 x 3000 x 2430) mm

zur Qualitätsüberprüfung von Glasscheiben, Solarpaneelen, lackierten Fahrzeugteilen u.ä. auf Funktion unter Hageleinfluss nach DIN EN 61215 zum Verschießen DIN-gerecht hergestellter Eiskugeln oder Kugeln aus Ersatzwerkstoffen wie z.B. Holz und Kunststoff geeignet Mechanische Daten Kugeldurchmesser 25,4 mm (andere auf Anfrage) Kugelmasse (Eis) 7,53 g Prüfgeschwindigkeit 23 m/s, variabel einstellbar Messwerte: Geschwindigkeit der Kugel, Genauigkeit <1 % Maße Prüfeinrichtung (3385 x 2855 x 1408) mm (BxHxT) Anschlussmedien 230 VAC, 50/60Hz Druckluft trocken, 5bar Optionales Zubehör Gießvorrichtung für DIN-gerechte Eiskugeln Gefriereinrichtung für Eiskugeln Druckluftbereitstellung Laserzieleinrichtung Positionierung von Hand oder mit elektrischem Positioniersystem

Die SF-Scroll-Kompressoren basieren auf einer neuen Technologie und gewährleisten einen wirtschaftlichen Betrieb, extrem niedrige Geräuschpegel, minimale Serviceanforderungen und Platzersparnis. Die SF-Scroll-Kompressoren basieren auf einer vollkommen neuen Technologie und gewährleisten einen wirtschaftlichen Betrieb, extrem niedrige Geräuschpegel, minimale Serviceanforderungen und Platzersparnis, all dies dank des einfachen und kompakten Designs. Die Geräte sind mit einem IP55-Elektromotor, Klasse F, ausgestattet. Diese Kompressoren haben minimale Serviceanforderungen, 10.000 Betriebsstunden praktisch ohne Wartung; zwischenzeitliche Routinearbeiten bleiben begrenzt und sind problemlos durchzuführen. Volumenstrom: 126 bis 1.488 l/min Motorleistung: 1,5 bis 15 kW Luftgekühlt: Ja Betriebsdruck (max.): 8 und 10 bar

Die Kombination von Eigenschaften, die Atlas Copco-Kompressoren von anderen unterscheidet, hat einen neuen Quantensprung in punkto Kundennutzen vollzogen: Das "WorkPlace"-Kompressorsystem. Den Kompressor aus dem herkömmlichen Kompressorraum herauszuholen und an den eigentlichen Anwendungsort zu platzieren, ist dank der extrem niedrigen Geräuschpegel und der Integration von optionalen Nebenaggregaten, wie Ausrüstungen für die Aufbereitung von Luft und Kondensat, Realität geworden. Das WorkPlace-Kompressorsystem vereinfacht einerseits die Installation und hat andererseits eine viel größere positive Auswirkung auf den Kundennutzen als traditionelle Produkte. Die GA 30-90-Serie ist in den folgenden Ausführungen verfügbar: Luft- oder wassergekühlt Pack- oder Full-Feature-Versionen (einschließlich Trockner) Ausführungen für hohe Umgebungstemperaturen (bis zu 50 °C, 145 °F) Volumenstrom: 3.918 bis 16.230 l/min Motorleistung: 30 bis 90 kW

Präzise Sägezuschnitte von unseren Band- und Kreissägeautomaten

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VCV provides the ultimate flexibility for machining large components. In addition to the «on center» machining capability of a standard lathe the VCV machines are able to machine eccentric features. With the use of our extensive range of standard milling and drilling attachments, the VCV machine range is capable of full 5 sided machining of components up to 12,000 mm in diameter and 350 tons in weight. On machines with a Yaxis the component can be machined in any position. The turning table is set on a sliding bed. The default Yaxis travel corresponds to the swing diameter of the machine size, but can be tailored to suit any application. Swing diameter:mm 12,000 Table diameter:mm 9,000 / 10,000 Y-axis:mm +/- 6,000 Working height max:mm 10,000 Main drive S1:kW 2x 60 - 2x 150

Fewer rejects thanks to high concentricity and axial runout accuracies (< 2 μm) Wide manufacturing range thanks to precise and powerful table drive (torque motorIncreased productivity through complete machining in just one setup Swing diameter:mm 900 Grinding diameter:mm 800 Height under grinding wheel thickness 100 mm:mm 600 Standard table diameter:mm 800 Table speed:rpm 150 Table load:kg 2,000 Carriages:1 Grinding ram stroke:mm 800 Feed force:kN 10 X- and Y-axis speed max.:mm/min 10,000 Spindle-holder tilt:degree - 5° + 275° Tilt lead:degree 1° (Hirth) Power (conv. GW) (S1):kW 7 à 25 Speed (conv. GW):rpm 6,000 à 12,000 Power (CBN wheels) (S1):kW 15 / 25 Speed (CBN wheels):rpm 8,000 / 18,000 GW diameter (conv. or CBN) max.:mm 150 / 300 Wheel thickness max.:mm 50 / 100 Wheel-holder clamping taper face:x Surface grinding spindle (conv. GW) (S1):kW 25 Spindle speed:rpm 5,000 Wheel diameter max.:mm 400 Electropermanent magnetic chuck No. of poles / slots width:mm 24 / 10H10

Scharmann has developed the ECOSPEED F for highspeed machining of mediumsized aluminium structural components. The horizontal spindle arrangement, the vertical pallet arrangement and the Sprint Z3 parallel kinematic machining head, which delivers high travel speeds (50 m/min) and accelerations (9.81 m/s²), all come from the successful ECOSPEED. What sets the F version apart from the standard ECOSPEED is that the machine column is stationary. The pallet travels in the X direction on the vertically arranged table group. The ECOSPEED F is equipped with a rotating double pallet station, located parallel to the Xaxis, which enables component loading and unloading during the machining cycle Length (X-axis):mm 8,000 Width (Y-axis):mm 2,000 / 2,500 Payload:kg 6,000 X-axis:mm 8,300 Y-axis:mm 2,500 / 3,000 Z-axis (spindle horizontal pos.):mm 670 Z-axis (spindle +/- 45°):mm 370 A/B-axis, conical work envelope:° +/- 45 Pallet changing time (definend cycle):sec 225 Chip to chip time (definend cycle):sec 13 Acceleration / deceleration in X-axis:m/s2 5.30 / 4.30 Acceleration / deceleration in Y-axis:m/s2 9.81 Acceleration / deceleration in Z-axis:°/s2 685 Acceleration / deceleration in A- and B-axis:m/min max. 50 Rapid traverse / feed in X-axis:m/min max. 50 Rapid traverse / feed in Y-axis:m/min max. 50 Rapid traverse / feed in Z-axis:m/min max. 50 Rapid traverse / feed in Bt-axis:rpm 20 Tool magazine:WERO rack type 129 / 300 pockets C-axis:° 360 continuous

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VCV provides the ultimate flexibility for machining large components. In addition to the «on center» machining capability of a standard lathe the VCV machines are able to machine eccentric features. With the use of our extensive range of standard milling and drilling attachments, the VCV machine range is capable of full 5 sided machining of components up to 12,000 mm in diameter and 350 tons in weight. On machines with a Yaxis the component can be machined in any position. The turning table is set on a sliding bed. The default Yaxis travel corresponds to the swing diameter of the machine size, but can be tailored to suit any application. Swing diameter:mm 1,600 Table diameter:mm 1,250 / 1,400 Y-axis:mm +/- 800 Working height max:mm 1,885 Main drive S1:kW 2x 60 - 2x 150

The mediumsized all round machining centers guarantee maximum efficiency, high machining quality and reliability. The Heckert Athletic series are perfect for a wide field of application in all areas of the metalworking industry. X / Y / Z travel mm:1,200 / 950 / 1,200 Rapid traverse m/min:65 Tool holder:HSK-A100 Max. tool length mm:800 Max. tool diameter mm:340 Pallet dimension mm:630 x 630 (630 x 800) Workpiece core contour ø in mm:1,250 Max. workpiece height mm:1,250 Loading mass kg:1,500 Machine length mm:8,100 Machine width mm:4,940

With the T/TF series, Droop+Rein offers gantry machining centres for heavyduty machining in many sectors Applications range from tool and mould making, aircraft component manufacturing and engine manufacturing to general mechanical engineering. Based on the robust, highly accurate and powerful basic machines, the T/TF series offers an extensive system of innovative automation and expansion stages that enable the machines to be adapted flexibly to each machining task. The optional automatically changing forktype milling head makes complex and demanding machining possible. Through extensive application knowhow, a variety of different milling heads are available including vertical milling heads, angle milling heads, and forktype milling heads for positional or simultaneously controlled applications. Power:kW 50 - 150 Torque:Nm 2,400 - 10,000 Speed:rpm 2,500 - 6,000 Length:mm 3,000 - 10,000 mm + 1,000 mm steps Width:mm 2,000 - 4,500 mm + 500 mm steps X-axis:mm 3,000 - 11,000 mm + 1,000 mm steps Y-axis:mm 3,000 - 6,000 mm + 500 mm steps Z-axis:mm 1,500 - 4,000 mm W-axis:mm 1,000 - 5,000 mm + 500 mm steps (only for T) C-axis:° ± 180/n x 360 X-axis:m/min 30 Y-axis:m/min 30 Z-axis:m/min 20 W-axis:m/min 4 (only for T) C-axis:°/min 3,600

The 5axis Mill / Turn center model s128 is a perfect combination of maximum performance and minimum footprint. On less than 2m², the s128 is a concentrate of high technology; Milling, Turning, Drilling, Engraving, Setting preparation and Diamond cutting processes are possible to produce parts as single unit or as serial manufacturing. The machining of miscellaneous parts from bar or blank and demanding perfect surface quality can be achieved with very short changeover time. Features Compact machine less than 2m² Flexible manufacturing solution Production from bar or blank 5Axis simultaneously Longitudinal Z:mm 150 Transversal X:mm 360 Vertical Y:mm 115 Power:kW 1 Torque:Nm 6 Spindle Speed:2000 min-1 Rotation speed C-axis:°/min 50000 Travel:° +30/-130 Torque max:Nm 122 Power:kW 1 Maximim speed:°/min 36000 Rotation speed:50000 min-1 Power:kW 5,2 Torque:Nm 1,2 Tool-holder type:SKI 20 Type:Pick and place Number of tools:16/24 positions Max. tool diameter:mm 40 Max. tool length:mm 86 Max. tool weight:kg 0,8 Installed power:13 kVA Voltage:400V/ 50Hz Compressed air supply:bar 6 Machine (without any options):kg 1100

With the FOGS NEO series, Droop+Rein has developed a powerful machine concept for complex machining. The range of services covers processes from machining standard geometries and prefinishing contours to final finishing. For dynamic machining with the highest feed rates, the concept caters for the movement and acceleration of constant masses, regardless of workpiece size and weight. Dynamic and flexible With its new, highly flexible and fast Caxis (±400°), the Droop+Rein FOGS NEO highspeed machining centre is ideal for the complete multifunctional machining of very large workpieces. Of course, the series also features automatic pallet or tool change, tool diameter and length measurement and automatic billing of contour deviations. Thanks to a variety of components and peripheral devices from their modular system, Droop+Rein can create an efficient and processoriented overall system that is tailored to the customer. Power:kW 40 Torque:Nm 700 - 1,800 Speed:rpm 4,000 - 6,000 Length:mm 3,000 - 30,000 + 1,000 mm steps Width:mm 2,000 - 6,000 + 500 mm steps X-axis:mm 3,800 - 31,000 + 1,000 mm steps Y-axis:mm 2,500 - 7,000 + 500 mm steps Z-axis:mm 1,500 - 2,500 C-axis:° ± 200/± 400/n x 360 X-axis:m/min 40 Y-axis:m/min 40 Z-axis:m/min 30 C-axis:°/min 4,320

The vertical lathes of the TVU product line of Berthiez are especially suited for machining engine and turbine components, which are primarily used in the aerospace industry as well as for alternative and classical power generation. The TVU vertical lathes are characterized by a complete cast design, highprecision static and dynamic positioning as well as longlasting reliability. Advantages of the TVU vertical turning lathes are, completely cast iron construction, high static and dynamic axis stability, high accuracies and long term reliability. For higher flexibility the machine can be equipped with several pallet change systems and adaptable milling heads. The optional Yaxis table traverse will permit the turning, milling and grinding of complex components in a single clamping. Swing diameter:mm 1,400 Turning diameter:mm 1,250 with standard tool clearance 170mm Machining height fixed crossrail:mm 800-1,130 Machining height moveable crossrail:mm 1,120 / 1,560 Moveable crossrail stroke:mm 800 Step moveable crossrail:mm 100 Table diameter:mm 1,250 Table speed:rpm 630 Table drive power S1 100%:kW 51 / 71 Table torque S1 100%:kW/Nm 10.6 / 13.5 Table load max.:kg 3,500 Cutting force:kN 50 Feed force:kN 15 Ram cross section:mm 250 x 250 Ram stroke:mm 1,000 / 1,250 Rapid traverse max.:mm/min 20,000 Tool interface:CAPTO / HSK / KM Spindle power S1:kW 21 / 36 Spindle speed:rpm 6,000 C-axis feedback intervall:sec 2 Tool interface:CAPTO / HSK / KM / ISO Torque:Nm 200 / 345 Swing diameter:mm 1,000 Twin-pallet Pallet diameter:mm 1,250 Twin-pallet Swing diameter:mm 1,250 Lateral pallet Pallet diameter:mm 1,250 Lateral pallet Swing diameter:mm 1,350 Front pallet Pallet diameter:mm 1,250 Front pallet Swing diameter:mm 1,400 Load on pallet:kg 2,000

Gantry design For machining of largest and heaviest workpieces Droop+Rein offers a floor guided gantry machine line. Best accessibility and utilisation of floor space for largest workpieces combined with highest flexibility in size and configuration. Cross rail, moveable (GS) or fixed (GFS) Economic machining of largest components – flexible, dynamic and precise Floor space savings compared to table moving machines In line with the modular principle – various controls, table configurations, milling head/spindles and tool changer configurations Length:mm 3,000 – 30,000 Width:mm 2,000 – 3,000 X-axis:mm 4,000 – 31,000 Y-axis:mm 3,000 – 4,000 Z-axis:mm 1,500 W-axis:mm 1,250 C-axis:mm ± 400 X-axis:m/min 30 Y-axis:m/min 40 Z-axis:m/min 30 W-axis:m/min 4 C-axis:°/min 4,320 Power S1/S6:kW 40/60 Torque S1/S6:Nm 1,100/1,800 Speed:rpm 4,000-6,000

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VCV provides the ultimate flexibility for machining large components. In addition to the «on center» machining capability of a standard lathe the VCV machines are able to machine eccentric features. With the use of our extensive range of standard milling and drilling attachments, the VCV machine range is capable of full 5 sided machining of components up to 12,000 mm in diameter and 350 tons in weight. On machines with a Yaxis the component can be machined in any position. The turning table is set on a sliding bed. The default Yaxis travel corresponds to the swing diameter of the machine size, but can be tailored to suit any application. Swing diameter:mm 7,000 Table diameter:mm 5,000 / 6,000 Y-axis:mm +/- 3,500 Working height max:mm 6,350 Main drive S1:kW 2x 60 - 2x 150

The vertical lathes of the TVU product line of Berthiez are especially suited for machining engine and turbine components, which are primarily used in the aerospace industry as well as for alternative and classical power generation. The TVU vertical lathes are characterized by a complete cast design, highprecision static and dynamic positioning as well as longlasting reliability. Advantages of the TVU vertical turning lathes are, completely cast iron construction, high static and dynamic axis stability, high accuracies and long term reliability. For higher flexibility the machine can be equipped with several pallet change systems and adaptable milling heads. The optional Yaxis table traverse will permit the turning, milling and grinding of complex components in a single clamping. Swing diameter:mm 2,300 Turning diameter:mm 2,100 with standard tool clearance 170mm Machining height fixed crossrail:mm 800-1,570 Machining height moveable crossrail:mm 1,120 / 1,560 / 2,000 Moveable crossrail stroke:mm 800 / 1,000 Step moveable crossrail:mm 100 Table diameter:mm 1,600 Table speed:rpm 320 Table drive power S1 100%:kW 51 / 71 / 100 Table torque S1 100%:kW/Nm 25 / 31.8 / 32.4 Table load max.:kg 15,000 Cutting force:kN 50 Feed force:kN 15 Ram cross section:mm 250 x 250 Ram stroke:mm 1,000 / 1,250 Rapid traverse max.:mm/min 20,000 Tool interface:CAPTO / HSK / KM Spindle power S1:kW 21 / 36 Spindle speed:rpm 6,000 C-axis feedback intervall:sec 2 Tool interface:CAPTO / HSK / KM / ISO Torque:Nm 200 / 345 Swing diameter:mm 1,900 Twin-pallet Pallet diameter:mm 1,600 Twin-pallet Swing diameter:mm 2,000 Front pallet Pallet diameter:mm 1,600 Front pallet Swing diameter:mm 2,300 Load on pallet:kg 5,000

Efficient high performance machining requires a rugged machine buildup without weakness. All technical parameters such as axis strokes, forces, torques and accelerations are set according to application requirements. The design of the STC X series has no bottleneck reducing the maximum possible material removal rates. With its design, unmatched productivity is possible. The STC X machine enhancement is ever ongoing. The goal is to continuously increase the customer benefits, i. e. increase productivity, increase accuracy or expand the application options. Pallet clamping surface according to DIN 55201:mm 800x800 (800x1000 / 1000x1000) Max. workpiece weight:kg 3000 Column linear travel X:mm 1700 Main spindle vertical travel Y:mm 1600 (1900) Table traverse travel Z:mm 1950 Swing diameter:mm 2000 A-axis:degree -100/+60 B-axis:degree endless X/Y/Z:m/min 45 A-axis:rpm 6(12) B-axis:rpm 5.5 (10) Motor spindle , max. Speed:rpm 8000 Max. power (100% ED):kW/Nm 37/940 Total taper:SK 50 (HSK-A100) Positioning uncertainty (P):sec 0,005 / 6 Positioning scatter (Ps):sec 0,0028 / 4 Reversal error (U):sec 0,002 / 3 Weight:t 42 Space requirement for basic machine LxWxH:mm 9500x7800x4550

These fouraxis horizontal machining centres are spacesaving miracles, but they remain true to our stringent quality standards in every respect. They guarantee maximum precision for your work processes thanks to our guiding values of accuracy and rigidity. These are values embodied by Heckert machining centres throughout their decadeslong history on the market. X / Y / Z travel mm:850/1020/1000 Rapid traverse m/min:80 X/Y/Z acceleration:6/10/7 Chip-to-chip time sec:3.1 Tool holder:HSK-A100 Max. tool length mm:600 Max. tool diameter mm:340 Pallet dimension mm:500 x 630 Time required to change pallets sec:13 Workpiece core contour ø in mm:900 Extended workpiece contour ø in mm:1,100 Max. workpiece height mm:1,050 Loading mass kg:1,500 Machine length mm:7,950 Machine width mm:3,300

Wir sägen und bearbeiten Profile aus Metall.

The LX series was specifically designed for the highprecision, efficient fiveaxis machining of turbine blades. This ultramodern machining platform is the result of decades of experience in the development of machine tools, CAM systems and special tools combined with our inhouse expertise in the prototype and series production of turbine blades. Max. distance between centers mm:1805 Swing Diameter mm:650 X-Axis mm:1800 Y-Axis mm:660 Z-Axis mm:600 A-Axis (Root Station) degree:360 endless A-Axis (Tip Station) degree:360 endless Swivel B-Axis degree:+/- 87 Linear Axes X Y Z U/min:50 Rotary Axis A U/min:200 Rotary Axis B U/min:60 Linear Axes P mm:0.009 Linear Axes Ps mm:0.0028 Rotary Axes P sec:6.0 Rotary Axes Ps sec:4.0 Power at 100% Duty kW:28 Torque at 100% Duty Nm:181 Speed U/min:18000 Tool Taper:HSK-A63 Max. Tool Weight kg:6.5 Max. Tool Diameter mm:150 Max. Tool Length mm:250 Standard / Max. number of Tools:24 / 62 Tool Chance Time sec:8 Max. Workpiece Diameter mm:NA Total weight (part and fixture) kg:NA Workpiece Change Time sec:NA Weight kg:32000 Lenght x Width x Height mm:10400 x 5920 x 3500 Safety Concept:CE-compliant Siemens 840D:Siemens 840D

The RVU grinding machines set new standards in highprecision machining and are especially suitable for high precision grinding applications in the bearing and aerospace industries. The range can be equipped with up to four watercooled grinding spindles which can achieve a performance of 45 kW at 18,000 rev/min. (according to the type of grinding wheel selected) The RVU facilitates a complete machining processing without interruption as optional dressing units, grinding wheel changers and workpiece measurement are available. Additional options for hard metal machining boring and workpiece measurement increase the possible applications of the machine series considerably. Swing diameter:mm 1,800 Grinding diameter:mm 1,600 Height under grinding wheel thickness 100 mm:mm 500 / 800 Standard table diameter:mm 1,600 Table speed:rpm 120 Table load:kg 4,000 Carriages:1 Grinding ram stroke:mm 800 / 1,000 Feed force:kN 10 X- and Y-axis speed max.:mm/min 10,000 Spindle-holder tilt:degree - 5° + 275° Tilt lead:degree 1° (Hirth) Power (conv. GW) (S1):kW 7 à 45 Speed (conv. GW):rpm 4,000 à 12,000 Power (CBN wheels) (S1):kW 15 / 25 Speed (CBN wheels):rpm 8,000 / 18,000 GW diameter (conv. or CBN) max.:mm 150 / 300 / 400 / 500 Wheel thickness max.:mm 50 / 100 / 190 Wheel-holder clamping taper face:x Surface grinding spindle (conv. GW) (S1):kW 25 Spindle speed:rpm 5,000 Wheel diameter max.:mm 400 / 500 Electropermanent magnetic chuck No. of poles / slots width:mm 32 / 10H10

The SIP SPC Series not only provides the user with the ultimate in precision but also with tried and tested sophisticated automation. Investment in SIP technology produces returns, thanks to aboveaverage longterm precision and many years of durability. Pallet clamping surface mm:1 250 Workpiece interference area diameter (mm) mm:940 / 1 250 Maximum workpiece weight kg:800 Maximum feed X / Y / Z m/min:40 Maximum number of tool slots:320 Length x Width x Height mm:4 550 x 7 760 x 4 150

The vertical lathes of the TVU product line of Berthiez are especially suited for machining engine and turbine components, which are primarily used in the aerospace industry as well as for alternative and classical power generation. The TVU vertical lathes are characterized by a complete cast design, highprecision static and dynamic positioning as well as longlasting reliability. Advantages of the TVU vertical turning lathes are, completely cast iron construction, high static and dynamic axis stability, high accuracies and long term reliability. For higher flexibility the machine can be equipped with several pallet change systems and adaptable milling heads. The optional Yaxis table traverse will permit the turning, milling and grinding of complex components in a single clamping. Swing diameter:mm 1,400 Turning diameter:mm 1,250 with standard tool clearance 170mm Machining height fixed crossrail:mm 800-1,130 Machining height moveable crossrail:mm 1,120 / 1,560 Moveable crossrail stroke:mm 800 Step moveable crossrail:mm 100 Table diameter:mm 800 Table speed:rpm 800 Table drive power S1 100%:kW 51 / 71 Table torque S1 100%:kW/Nm 10.6 / 13.5 Table load max.:kg 3,500 Cutting force:kN 50 Feed force:kN 15 Ram cross section:mm 250 x 250 Ram stroke:mm 1,000 / 1,250 Rapid traverse max.:mm/min 20,000 Tool interface:CAPTO / HSK / KM Spindle power S1:kW 21 / 36 Spindle speed:rpm 6,000 C-axis feedback intervall:sec 2 Tool interface:CAPTO / HSK / KM / ISO Torque:Nm 200 / 345 Swing diameter:mm 1,000 Twin-pallet Pallet diameter:mm 800 Twin-pallet Swing diameter:mm 1,250 Lateral pallet Pallet diameter:mm 1,000 Lateral pallet Swing diameter:mm 1,350 Front pallet Pallet diameter:mm 800 Front pallet Swing diameter:mm 1,400 Load on pallet:kg 2,000

Finishing centers for the jewelry industries, the machines range s210/ s220 combine several processes such as Milling, Engraving, Drilling and Faceting to produce parts for the most demanding key players of the jewelry crafts worldwide. His legendary finishing qualities best fit the requirements in terms of accuracy and ease of use. Features 6 to 8Axis Faceting, engraving, drilling, milling 2 spindles with changer and tool magazine High frequency 45.000min1 spindle Easy changeover of the programs CNC control unit Siemens 840Di Voltage:3x400 V /50 Hz Control voltage:24 V DC Installed power:7,5 kVA 15A Air pressure:bar min 5 (max 10) Weight:kg 1200 CNC control unit:Siemens 840 Di Engraving software:CAD-CAM/Vision numeric Horizontal Spindle:10000 min-1 Vertical spindle s220:HF 45000 min-1 Angular displacement D-shaped surface A:° 180 Dividing device B:° 360 Drum for angular positioning C:° s210: 225 / s220: 180 Linear displacement X:mm s210: 25 / s220: 41 Linear displacement Y:mm s210: 80 / s220: 41 Vertical displacement milling head Z:mm s210: 150 / s220: 133 Manual Q axis:mm s210: 45 / s220: 33 Manual RB axis:mm s210: 20 / s220: 20 SP axis:° s210: 360 / s220: SP1/SP2 360 Tool holder:Automatic diamond tool revolver 6 positions Magazine:s210: manual / s220: Tool magazine 8 positions Clamping:s220: Pneumatic clamping and unclamping system Optical:Centering microscope device Tool holder:Ø 30mm D-Shaped ring until radius of 5mm Code reader:Bar code reader integration / programs record Machine (without any options):kg s210: 1000 / s220: 1300

The vertical lathes of the TVU product line of Berthiez are especially suited for machining engine and turbine components, which are primarily used in the aerospace industry as well as for alternative and classical power generation. The TVU vertical lathes are characterized by a complete cast design, highprecision static and dynamic positioning as well as longlasting reliability. Advantages of the TVU vertical turning lathes are, completely cast iron construction, high static and dynamic axis stability, high accuracies and long term reliability. For higher flexibility the machine can be equipped with several pallet change systems and adaptable milling heads. The optional Yaxis table traverse will permit the turning, milling and grinding of complex components in a single clamping. Swing diameter:mm 1,400 Turning diameter:mm 1,250 with standard tool clearance 170mm Machining height fixed crossrail:mm 800-1,130 Machining height moveable crossrail:mm 1,120 / 1,560 Moveable crossrail stroke:mm 800 Step moveable crossrail:mm 100 Table diameter:mm 800 Table speed:rpm 800 Table drive power S1 100%:kW 51 / 71 Table torque S1 100%:kW/Nm 10.6 / 13.5 Table load max.:kg 3,500 Cutting force:kN 50 Feed force:kN 15 Ram cross section:mm 250 x 250 Ram stroke:mm 1,000 / 1,250 Rapid traverse max.:mm/min 20,000 Tool interface:CAPTO / HSK / KM Spindle power S1:kW 21 / 36 Spindle speed:rpm 6,000 C-axis feedback intervall:sec 2 Tool interface:CAPTO / HSK / KM / ISO Torque:Nm 200 / 345 Swing diameter:mm 1,000 Twin-pallet Pallet diameter:mm 800 Twin-pallet Swing diameter:mm 1,250 Lateral pallet Pallet diameter:mm 800 Lateral pallet Swing diameter:mm 1,350 Front pallet Pallet diameter:mm 800 Front pallet Swing diameter:mm 1,400 Load on pallet:kg 2,000

Flexibility, efficiency and precision play a very important role for machine manufacturers and tool builders, especially when dealing with large components. These three requirements led to the development of the gantry machining centre TS/TFS NEO with a fixed and movable crossbeam, whereby the customer chooses the table designs, controls and milling units suitable for them on a modular basis. The TS/TFS NEO features a new milling unit and a modified Caxis (±400°) which, thanks to its enormous flexibility, can be used for efficient production of highly precise machine parts. The large number of automatically changeable milling heads increases the machine's flexibility within its scope of application. The TFS also allows automatic tool or spindle changing and tool or workpiece measurement. Power:kW 40 Torque:Nm 700 - 1,800 Speed:rpm 4,000 - 6,000 Length:mm 2,000 - 5,000 mm + 1,000 mm steps Width:mm 2,000 - 5,000 mm + 1,000 mm steps X-axis:mm 3,000 - 6,000 Y-axis:mm 3,000 - 4,000 Z-axis:mm 1,500 - 2,500 W-axis:mm 1,250 mm (only for TS) C-axis:° ± 200/± 400/n x 360 X-axis:m/min 30 Y-axis:m/min 40 Z-axis:m/min 30 W-axis:m/min 4 m/min (only for TS) C-axis:°/min 4320

The vertical lathes of the TVU product line of Berthiez are especially suited for machining engine and turbine components, which are primarily used in the aerospace industry as well as for alternative and classical power generation. The TVU vertical lathes are characterized by a complete cast design, highprecision static and dynamic positioning as well as longlasting reliability. Advantages of the TVU vertical turning lathes are, completely cast iron construction, high static and dynamic axis stability, high accuracies and long term reliability. For higher flexibility the machine can be equipped with several pallet change systems and adaptable milling heads. The optional Yaxis table traverse will permit the turning, milling and grinding of complex components in a single clamping. Swing diameter:mm 2,800 Turning diameter:mm 2,600 with standard tool clearance 170mm Machining height fixed crossrail:mm 800-1,570 Machining height moveable crossrail:mm 1,120 / 1,560 / 2,000 / 2,440 Moveable crossrail stroke:mm 800 / 1,000 Step moveable crossrail:mm 100 Table diameter:mm 2,200 Table speed:rpm 250 Table drive power S1 100%:kW 51 / 71 / 100 Table torque S1 100%:kW/Nm 26.1 / 36.4 / 37.1 Table load max.:kg 20,000 Cutting force:kN 50 Feed force:kN 15 Ram cross section:mm 250 x 250 Ram stroke:mm 1,000 / 1,250 / 1,500 Rapid traverse max.:mm/min 20,000 Tool interface:CAPTO / HSK / KM Spindle power S1:kW 21 / 36 Spindle speed:rpm 6,000 C-axis feedback intervall:sec 2 Tool interface:CAPTO / HSK / KM / ISO Torque:Nm 200 / 345 Swing diameter:mm 2,200 Front pallet Pallet diameter:mm 2,200 Front pallet Swing diameter:mm 2,800 Load on pallet:kg 6,000