Produse pentru masini (213)

Scraggy antislip tape with sticky reverse side. Resistant to abrasion. Easy fitting on smooth surfaces. Considerably decreases the danger of slipping. To be used in particular on the edge of stairs oading ramps in pedestrian zones at entrances on machine foot steps etc. Tested in accordance with antislip standard EN 13 552. In Stock:12 Product No:4219

Suitable for collecting of municipal and industrial waste. Lids are adjusted for collection of sorted waste possible adjustments at the customer's request. It is delivered with two braked wheels as standard. Rotary wheels of 200 mm diameter. Central brake can be delivered too. They meet EN 8402 and EN 8403 as for their dimensions. UV resistant resistant to chemical and biological impacts. Smooth surfaces avoid waste clinging. Material they are made from does not contain cadmium and can be regranulated. In Stock:3 pcs Product No:0013-3/1V/V Capacity:1100 Weight Kg:45 Load Capacity Kg:440 kg

Metal dustbin 110 and 70itres. Used for municipal waste collection. Using colourids the dustbins can be used even for sorted waste. Made from galvanized sheet metal resistant to the waste high temperatures e.g. hot ash In Stock:74 pcs Product No:1002

Suitable for collecting of municipal and industrial waste. ids are adjusted for collection of sorted waste possible adjustments at the customer's request. It is delivered with two braked wheels as standard. Rotary wheels of 200 mm diameter. Central brake can be delivered too. They meet EN 8402 and EN 8403 as for their dimensions. UV resistant resistant to chemical and biological impacts. Smooth surfaces avoid waste clinging. Material they are made from does not contain cadmium and can be regranulated. In Stock:2 Product No:0014-1 Capacity:1100 Weight Kg:45 Load Capacity Kg:440 kg

Scraggy antislip tape with sticky reverse side. Resistant to abrasion. Easy fitting on smooth surfaces. Considerably decreases the danger of slipping. To be used in particular on the edge of stairs oading ramps in pedestrian zones at entrances on machine foot steps etc. Tested in accordance with antislip standard EN 13 552. In Stock:1 Product No:4045

The barrel is made of steel galvanized sheets. The shell is welded and reinforced by pressed stiffeners. The bottom andid are connected with the shell by multiple safety folding. A sealing substance is applied in the folding to provide tightness that is examined with each barrel. The filling hole is closed by a plug that can be secured by a protective cap with a tearoff strip. This ensures original condition of the packing. The design enables multiple use minor repairs and recycling. In Stock:0 Product No:B0479 Bottom Thickness Mm:1 and 2 Shell Thickness Mm:1 and 2 Height:3 mm - 880

The barrel is made of steel galvanized sheets. The shell is welded and reinforced by pressed stiffeners. The bottom andid are connected with the shell by multiple safety folding. A sealing substance is applied in the folding to provide tightness that is examined with each barrel. The filling hole is closed by a plug that can be secured by a protective cap with a tearoff strip. This ensures original condition of the packing. The design enables multiple use minor repairs and recycling. In Stock:0 Product No:B0482 Bottom Thickness Mm:1 and 2 Shell Thickness Mm:1 and 2 Height:3 mm - 880

There are the basic types of wheelsisted in the offer: fixed rotary rotary with brake. Wheels are assembled from plastic disc with rubber tyre. Hardened galvanized steel fork. These wheels are an alternative to the wheels with a steel disc. They can be used in the same way as the wheels with a steel disc in a great range of handling machines. In Stock:82 Product No:6349

Individual parts of plastic containers are compatible only with the containers made by the company "EUROPLAST" as standard they are delivered without fasteners. Colour versions by agreement. In Stock:47 Product No:0004-A5

There are the basic types of wheelsisted in the offer: fixed rotary rotary with brake. Wheels are assembled from plastic disc with rubber tyre. Hardened galvanized steel fork. These wheels are an alternative to the wheels with a steel disc. They can be used in the same way as the wheels with a steel disc in a great range of handling machines. In Stock:0 Product No:6351

The barrel is made of steel galvanized sheets. The shell is welded and reinforced by pressed stiffeners. The bottom andid are connected with the shell by multiple safety folding. A sealing substance is applied in the folding to provide tightness that is examined with each barrel. The filling hole is closed by a plug that can be secured by a protective cap with a tearoff strip. This ensures original condition of the packing. The design enables multiple use minor repairs and recycling. In Stock:0 Product No:B0494-E Bottom Thickness Mm:1 Shell Thickness Mm:1 Height:3 mm - 820

The barrel is made of steel galvanized sheets. The shell is welded and reinforced by pressed stiffeners. The bottom andid are connected with the shell by multiple safety folding. A sealing substance is applied in the folding to provide tightness that is examined with each barrel. The filling hole is closed by a plug that can be secured by a protective cap with a tearoff strip. This ensures original condition of the packing. The design enables multiple use minor repairs and recycling. In Stock:0 Product No:B0412 Bottom Thickness Mm:1 and 2 Shell Thickness Mm:1 and 2 Surface Treatment:Zn Bottom:G2 Shell:x Deaeration Hole In The Bottom:G 3/4 Height:3 mm - 880

The barrel is suitable for transport and storage ofiquid substances. Stamping on theid means approval for transport according to international regulations: IMDGCode marine transport RID railway transport ADR road transport In Stock:0 Product No:B0427 Bottom Thickness Mm:1 Shell Thickness Mm:1 Surface Treatment:Zn Bottom:G2 Shell:x Deaeration Hole In The Bottom:G 3/4 Height:3 mm - 880

Made of Polyethylene with high density HDPE. For waste separation there are different versions ofids opening for glass/paper 160190/610x60 mm. Standardly delivered with two brakes on two wheels wheel diameter is 200 mm. Can be delivered in version equipped with central brake. In agreement with EN 840 certification. Resistant to UV radiation chemical and biological impacts and frost. Smooth surfaces help against sticking of waste on them. Manufacture materials does not contain any cadmium and can be granulated again. In Stock:0 Product No:0026-3/8-B Capacity:1100 Weight Kg:45 Load Capacity Kg:440 kg

Made of Polyethylene with high density HDPE. For waste separation there are different versions ofids opening for glass/paper 160190/610x60 mm. Standardly delivered with two brakes on two wheels wheel diameter is 200 mm. Can be delivered in version equipped with central brake. In agreement with EN 840 certification. Resistant to UV radiation chemical and biological impacts and frost. Smooth surfaces help against sticking of waste on them. Manufacture materials does not contain any cadmium and can be granulated again. In Stock:6 Product No:0026-B Capacity:1100 Weight Kg:45 Load Capacity Kg:440 kg

Suitable for collecting of communal and industrial waste. Adjustedids for collection of sorted waste average of hole for glass 160 mm possible adjustments available if required. Two braked wheels in a standard equipment. Rotary wheels of 200 mm diameter. Central brake available if required. Maximal recommendedoad 250/360 kg. Conform to DIN 30 700 and UNI 9260 as far as dimensions are concerned. Resistant to UV chemical and biological impacts. Smooth surfaces avoid waste adhering. Manufactured from recyclable material without cadmium content. The material may be regranulated. In Stock:0 pcs Product No:0055 Capacity:1100 Weight Kg:45 Load Capacity Kg:440 kg

Used for municipal waste collection. Using colourids the dustbins can be used even for sorted waste. Made from galvanized sheet metal resistant to the waste high temperatures e.g. hot ash. In Stock:2 Product No:1008-2

Two braked wheels in a standard equipment. Rotary wheels of 200 mm diameter. Central brake available if required. Maximal recommendedoad 250/360 kg. Conform to DIN 30 700 and UNI 9260 as far as dimensions are concerned. Resistant to UV chemical and biological impacts. Smooth surfaces avoid waste adhering. Manufactured from recyclable material without cadmium content. The material may be regranulated. In Stock:6 Product No:0029-6 Capacity:1100 Weight Kg:45 Load Capacity Kg:440 kg

Oilremoval "A" type designed for standard degreasing and washing products polluted with various types of oils machineryiquids and plastic greases. Theiquid is odourfree and high absorption capacity enablingongterm effective degreasing in ecologyfriendly washing units In Stock:0 Product No:6332-V

The barrel is made of steel galvanized sheets. The shell is welded and reinforced by pressed stiffeners. The bottom andid are connected with the shell by multiple safety folding. A sealing substance is applied in the folding to provide tightness that is examined with each barrel. The filling hole is closed by a plug that can be secured by a protective cap with a tearoff strip. This ensures original condition of the packing. The design enables multiple use minor repairs and recycling In Stock:0 Product No:B0427-E Bottom Thickness Mm:1 and 2 Shell Thickness Mm:1 and 2 Surface Treatment:Zn Bottom:G2 Shell:x Deaeration Hole In The Bottom:G 3/4 Height:3 mm - 880

Individual parts of plastic containers are compatible only with the containers made by the company "EUROPLAST" as standard they are delivered without fasteners. Colour versions by agreement. In Stock:24 Product No:0004-A1

Scraggy antislip tape with sticky reverse side. Resistant to abrasion. Easy fitting on smooth surfaces. Considerably decreases the danger of slipping. To be used in particular on the edge of stairs oading ramps in pedestrian zones at entrances on machine foot steps etc. Tested in accordance with antislip standard EN 13 552. In Stock:0 Product No:4047

Die Bending with Press Brake Custom manufacturing as well as large volume production Software simulation of bending feasibility CNC programming of press brakes from office “Z” bend, flattened hems and radius bends Bending flexibility thanks to 6-axis backgauge Maximal bending length 3000 m, maximal sheet thickness 10 mm

Suitable for collection of municipal and also industrial waste. Lids are adapted for sorted waste collection adaptation is possible based on a customer's wish. As standard it is delivered with two braked wheels. Rotary wheels 200 mm. They can be delivered with a central brake. As for their dimensions they meet EN 8402 and EN 8403. Resistant to UV resistant to chemical and biological impacts. Smooth surfaces impede the collection clinging. Material they are made of does not contain cadmium and can be granulated again. In Stock:7 pcs Product No:0013-1 Capacity:1100 Weight Kg:45 Load Capacity Kg:440 kg

For division in theongitudinal direction. Transparent plastic with bluish coat. In Stock:149 Product No:7335

The barrel is made of steel galvanized sheets. The shell is welded and reinforced by pressed stiffeners. The bottom andid are connected with the shell by multiple safety folding. A sealing substance is applied in the folding to provide tightness that is examined with each barrel. The filling hole is closed by a plug that can be secured by a protective cap with a tearoff strip. This ensures original condition of the packing. The design enables multiple use minor repairs and recycling. In Stock:0 Product No:B0433-E Bottom Thickness Mm:1 and 2 Shell Thickness Mm:1 and 2 Surface Treatment:Zn Bottom:G2 Shell:x Deaeration Hole In The Bottom:G 3/4 Height:3 mm - 880

Individual parts of plastic containers are compatible only with the containers made by the company "EUROPLAST" as standard they are delivered without fasteners. Colour versions by agreement. In Stock:31 Product No:0004-A2

Individual parts of plastic containers are compatible only with the containers made by the company "EUROPLAST" as standard they are delivered without fasteners. Colour versions by agreement. In Stock:22 Product No:0005-A3

They are intended for BIO waste collection. Containers in brown colour are equipped with air holes enabling the waste perfect venting. They reduce the waste volume thanks toiquid evaporation. iquid evaporation changes pH and thus the smell is reduced considerably. In Stock:2 Product No:0021-5bio Capacity:1100 Weight Kg:45 Load Capacity Kg:440 kg

Suitable for collecting of communal and industrial waste. Adjustedids for collection of sorted waste average of hole for glass 160 mm possible adjustments available if required. Two braked wheels in a standard equipment. Rotary wheels of 200 mm diameter. Central brake available if required. Maximal recommendedoad 250/360 kg. Conform to DIN 30 700 and UNI 9260 as far as dimensions are concerned. Resistant to UV chemical and biological impacts. Smooth surfaces avoid waste adhering. Manufactured from recyclable material without cadmium content. The material may be regranulated. In Stock:2 Product No:0021-5 Capacity:1100 Weight Kg:45 Load Capacity Kg:440 kg