Produse pentru magnet din (1171)

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F16C-v D mm:16 +0.1/ -0.1 H mm:4.5 +0.2/ -0.1 d1 mm:3.5 +0.2/ -0.2 d2 mm:6.5 +1.5/ 0 Force* N:14 Weight g:Temperature °C Temperature °C:200

Flat pot magnets hard ferrite, with cylinder bore Article number:F84C-Ks D mm:84 H mm:20 d1 mm:12 d2 mm:6.4 t mm:15 Force* N:650 Colour:black Weight g:470 Temperature °C:60

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F10AG-vM3x7 D mm:10 +0.1/ -0.1 H mm:4.5 +0.2/ -0.1 L mm:7 +0.5/ -0.5 Thread M:M3 Force* N:Weight g Weight g:Temperature °C Temperature °C:200

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F6-NdAv D mm:6 +0.1/ -0.1 d mm:6 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 L mm:11.5 +0.2/ -0.2 Thread M:M3 Temperature °C:80

The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes Article number:MS130NdSo00rh00 L mm:130 B mm:145 H mm:75 Temperature °C:80

Bar magnet NdFeB, steel body, zinc coated Article number:S4Nd D mm:4 +0.1/ -0.1 H mm:20 +0.2/ -0.2 A¹ mm:15 Force* N:2.5 Temperature °C:80

Bar magnet AlNiCo, steel body - with internal thread Article number:S6G D mm:6 +0.1/ -0.1 H mm:20 +0.2/ -0.2 Thread MxL:M3x5 Force* N:Weight g Weight g:Temperature °C Temperature °C:450

The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes Article number:MS130HFSo00rh00 L mm:130 B mm:145 H mm:75 Temperature °C:80

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F25-NdDvM4 D mm:25 +0.1/ -0.1 d mm:4.5 H mm:7 +0.2/ -0.2 Thread M:M4 Force* N:160 Weight g:24 Temperature °C:80

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A18D-KsM4 D mm:18 Thread M:M4 Force* N:25 Temperature °C:60

Magnetic system with stainless steel body and strong neodymium magnet core. This series have a deeper magnetic force than the classic flat pot systems. Two milled surfaces on the perimeter allow to fix the system with a tool. The holding surface is over molded with a hard type of rubber (TPE) and protects the magnet from strikes. At the same time the rubber effects a noise absorption. Article number:FG013NdAG06rh00 D mm:13 +0.2/ -0.2 H mm:16 +0.2/ -0.2 Thread MxL:M6x10 SW mm:11 b mm:Force* N Force* N:15 Weight g:13 Temperature °C:80

Bar magnets AlNiCo, steel body, zinc coated Article number:S6 D mm:6 +0.1/ -0.1 H mm:20 +0.2/ -0.2 A¹ mm:12 Weight g:4.5 Temperature °C:450

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F10-NdCv D mm:10 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 d1 mm:2.6 +0.1/ -0.1 d2 mm:5.2 +1/ 0 Force* N:19 Weight g:Temperature °C Temperature °C:80

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F6-SCBv D mm:6 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 Temperature °C:200

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets. Article number:F50C-4016 D mm:50 +0.2/ -0.1 H mm:10 +0.5/ -0.2 d1 mm:8.5 +0.2/ -0.2 d2 mm:22 Force* N:145 Weight g:85 Temperature °C:220

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F25D-vM4 D mm:25 +0.1/ -0.1 H mm:7 +0.3/ -0.2 K mm:5.2 Thread M:M4 Force* N:36 Weight g:18 Temperature °C:200

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A12A-KsM4 D mm:12 L mm:14.5 Thread M:M4 Force* N:13 Temperature °C:60

Following standard colours are available ex stock » transparent: blue, yellow, green, orange, red, black, nature » completely coloured: blue, yellow, green, orange, red, black, white » no nickel – no allergy » attractive design » grip edge for easy detachment » magnets are protected and do not break (possible in case of raw magnets) » usable on both sides (for example for paperclips, pens, scissors) » top / bottom colour mix Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » higher holding force Article number:OM025NdRd00 D mm:25 Packaging unit:5 pieces

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A12A-KwM4 D mm:12 L mm:14.5 Thread M:M4 Force* N:13 Temperature °C:60

Systems for plugging into a groove that keep using locking lug without additional fastening. Article number:MBS56x12x12 H mm:12.2 L mm:56 l mm:53 B mm:12 b mm:11 t mm:2.2 Force* N:85 Weight g:24 Temperature °C:60

Ein spezielles Permanent-Magnetsystem ermöglicht Arbeitstemperaturen von bis zu 300°C für maximal 5 Minuten und von 250°C dauerhaft. Ideal zum Bewegen von geheizten Werkzeugen und Gesenken, oder auch von wärmebehandelten Werkstücken. Der FX-VV HOT hält was andere fallen lassen. Die FX Produktfamilie reicht von Universell bis Hochspeziell - Sicher haben wir auch das passende Gerät für Ihre Anwendung.

FX-HVS HV Systeme erlauben es dem Anwender, die am Kran schwebende Last um 90° zu schwenken. Durch einfache Arretierung am System kann die Last jederzeit die Lage von Horizontal nach Vertikal wechseln. FX HV Wendevorrichtungen ermöglichen es, liegende Werkstücke in die Senkrechte zu bewegen oder auch andresherum.

Super lightweight aluminum body for direct installation of clamping elements. The PMNM UPC pallet is delivered completely ready fitted to fit the Erowa UPC clamping system with original Erowa elements. Optional with handles and/or link Gripper. is used to clamp small and medium-sized workpieces. It works without an external power supply and is activated manually via a changeover lever.

FXL-RR magnetic chucks are especially suitable for the rotationally symmetrical machining of rings, sleeves and flanges. The radial pole pitch ensures uniform clamping over the entire contact area and additional mechanical positioning and clamping aids can be inserted into the T-slots in the poles. The T-slots provide the further option of also using mobile or fixed pole extensions to free the workpiece or to clamp it without pull-down.

Permanent Magnetic Circular Chuck Type RNF with neodymium magnet system and low height are used for clamping of small and thin workpieces. Structure: — Neodymium magnet system, steel body, — Max Pole pitch 1,5+0,5mm — Holding power 80N/cm² — Magnetic field height 4mm — Pole plate wearing limit 4mm — Switch travel MAG-ENT-MAG 180° Recommendation: Fine pole circular chuck for small parts

FXE-TTP Elektro-Permanent Traverse für Träger und Profile heben lange Werkstücke sicher und erlauben es dank Ihrer speziellen Polgemoetrie auch Werkstücke seitlich anzupacken um diese aus einem Bündel zu lösen oder auch um diese um 90° zu drehen. FXE-T Traversenlösungen mit onBoard Steuerungstechnik werden direkt an Netzspannung betrieben und sind somit sehr schnell auch an verschiedenen Kranen, ohne individuelle Steuerungsinstallation, verwendbar. Flaig Magnetsysteme bietet Traversen für alle Blechformate, Träger und Profile und auch zum Abräumen von Schneidetischen in nur einem Hub.

FXE-TP electro-permanent lifting magnets are ideally suited for beams and profiles due to their special design. The pick-up of beams at the profile web is possible without any problems due to the specially shaped pole surface. FXE-TP lifting magnets are also available as a truss solution, specially tailored to your application.

FX-HVS HV systems allow the user to swivel the load suspended on the crane by 90°. By simply locking it to the system, the load can change position from horizontal to vertical at any time. FX HV turning devices make it possible to move horizontal workpieces to the vertical or vice versa. Ask us for more.

FX-R ist die Baureihe für Rundmaterialhandling. Das tiefe flachwinkelige Prisma sorgt für ein sicheres Positionieren auf der Last und leitet das Magnetfeld tief ins Material. Das Magnetsystem lässt sich in der gesamten Durchmesserbandbreite gut schalten und schlägt nicht zurück, ein Abscheren der Last durch Verdrehen wird durch das übergreifende Prisma verhindert. Flachmaterial, auch bei geringer Materialstärke, ist für den FX-R kein Problem. Bei heißen Werkstücken schützt das tiefe Prisma den Magnetkern vor Überhitzung. Der Lasthebemagnet für Wellen und Stangen.

FX-R is the series for round material handling. The deep shallow-angled prism ensures safe positioning on the load and guides the magnetic field deep into the material. The magnet system can be switched well in the entire diameter bandwidth and does not recoil, shearing of the load due to twisting is prevented by the overlapping prism. Flat material, even with low material thickness, is no problem for the FX-R. With hot workpieces, the deep prism protects the magnet core from overheating. The lifting magnet for shafts and bars.