Produse pentru magnet din (1323)

Alternative to the standard we also offer individual solutions: » Lacquering also possible in other colours » Equipped with a closed eyelet » Higher holding force Article number:DEMAG-16 D mm:16 Hook:M3 Force* N:18

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F10A-vM3 D mm:10 +0.1/ -0.1 d mm:6 +0.1/ -0.1 H mm:4.5 +0.2/ -0.1 L mm:11.5 +0.3/ -0.2 Thread M:M3 Temperature °C:200

Bar magnet AlNiCo, steel body, with internal thread Article number:S12.5 D mm:12.5 +0.1/ -0.1 H mm:16 +0.2/ -0.2 Thread MxL:M4x6 Force* N:20 Surface:zinc coated Weight g:15 Temperature °C:350

The above mentioned flat pot magnets are manufactured from standard parts according to DIN EN ISO 4017-8.8. Dimensions and tolerances depend on the current status of the standard. Hexagon screws are suitable for being tightened with an open-end spanner. This is a special advantage in comparison to our round flat pot magnets, which only can be screwed on by hand. The hexagon screws are available with different lengths corresponding to fixed standards. By this simplified production method they are quite economical resp. there is a cost benefit compared with the turned special parts. Article number:FG010NdAG06v-00 SW mm:10 h mm:4 +0/ -0.5 Thread MxL:M6x12 Force* N:25 Temperature °C:80

The above mentioned flat pot magnets are manufactured from standard parts according to DIN EN ISO 4026-45H. Dimensions and tolerances depend on the current status of the standard. The threaded pins with hexagon socket have a universal thread and are available with different lengths corresponding to fixed standards. By this simplified production method they are quite economical resp. there is a cost benefit compared with the turned special parts. Moreover, through the universal thread, they benefit from a continuously adjustable magnetic attachment point. Article number:FG006NdAG06v-00 Thread MxL:M6x12 SW mm:Force* N Force* N:2.5 Weight g:Temperature °C Temperature °C:80

Following standard colours are available ex stock » transparent: blue, yellow, green, orange, red, black, nature » completely coloured: blue, yellow, green, orange, red, black, white » high adhesive force at a small diametre » Manufactured without glue » easy to grip, easy to detach Alternative to the standard we also offer individual solutions: » Plastic housing in special colours Article number:OM014NdRd01 D mm:14 H mm:17.7 Packaging unit:5 pieces

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F6-NdAGvM3x7 D mm:6 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 Thread MxL:M3x7 Weight g:1.3 Temperature °C:80

Bar magnet AlNiCo, steel body - with threaded neck Article number:S6AGvM3x7 D mm:6 +0.1/ -0.1 H mm:20 +0.2/ -0.2 Thread MxL:M3x7 Force* N:Weight g Weight g:4.5 Temperature °C:450

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F10B-v D mm:10 +0.1/ -0.1 H mm:4.5 +0.2/ -0.1 Temperature °C:200

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F50C-v D mm:50 +0.2/ -0.1 H mm:10 +0.5/ -0.2 d1 mm:8.5 +0.2/ -0.2 d2 mm:22 Force* N:180 Weight g:85 Temperature °C:200

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F6-NdBv D mm:6 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 Temperature °C:80

Use as door stop is possible. It may be used in saunas or infrared cabins. Article number:FSW15-NdAGM6x23 Force* N:50 Weight g:10 Temperature °C:80

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F16-SCCvT D mm:16 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 d1 mm:3.5 +0.1/ -0.1 d2 mm:6.6 +1/ 0 Force* N:57 Weight g:Temperature °C Temperature °C:280

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets. Article number:F20C-4016 D mm:20 +0.1/ -0.1 H mm:6 +0.2/ -0.1 d1 mm:4.1 +0.4/ 0 d2 mm:9.4 +1/ 0 Force* N:22 Weight g:Temperature °C Temperature °C:220

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets. Article number:F25A-4016M5 D mm:25 +0.1/ -0.1 d mm:8 +0.2/ -0.2 H mm:7 +0.3/ -0.2 L mm:16 +0.5/ -0.3 Thread M:M5 Force* N:32 Weight g:20 Temperature °C:220

Bar magnet AlNiCo, steel body with fitting tolerance h6 Article number:S6P D mm:6 (h6) H mm:10 +0.2/ -0.2 Temperature °C:450

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F16C-v D mm:16 +0.1/ -0.1 H mm:4.5 +0.2/ -0.1 d1 mm:3.5 +0.2/ -0.2 d2 mm:6.5 +1.5/ 0 Force* N:14 Weight g:Temperature °C Temperature °C:200

Flat pot magnets hard ferrite, with cylinder bore Article number:F84C-Ks D mm:84 H mm:20 d1 mm:12 d2 mm:6.4 t mm:15 Force* N:650 Colour:black Weight g:470 Temperature °C:60

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F10AG-vM3x7 D mm:10 +0.1/ -0.1 H mm:4.5 +0.2/ -0.1 L mm:7 +0.5/ -0.5 Thread M:M3 Force* N:Weight g Weight g:Temperature °C Temperature °C:200

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F6-NdAv D mm:6 +0.1/ -0.1 d mm:6 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 L mm:11.5 +0.2/ -0.2 Thread M:M3 Temperature °C:80

The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes Article number:MS130NdSo00rh00 L mm:130 B mm:145 H mm:75 Temperature °C:80

Bar magnet NdFeB, steel body, zinc coated Article number:S4Nd D mm:4 +0.1/ -0.1 H mm:20 +0.2/ -0.2 A¹ mm:15 Force* N:2.5 Temperature °C:80

Bar magnet AlNiCo, steel body - with internal thread Article number:S6G D mm:6 +0.1/ -0.1 H mm:20 +0.2/ -0.2 Thread MxL:M3x5 Force* N:Weight g Weight g:Temperature °C Temperature °C:450

The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes Article number:MS130HFSo00rh00 L mm:130 B mm:145 H mm:75 Temperature °C:80

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F25-NdDvM4 D mm:25 +0.1/ -0.1 d mm:4.5 H mm:7 +0.2/ -0.2 Thread M:M4 Force* N:160 Weight g:24 Temperature °C:80

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A18D-KsM4 D mm:18 Thread M:M4 Force* N:25 Temperature °C:60

Magnetic system with stainless steel body and strong neodymium magnet core. This series have a deeper magnetic force than the classic flat pot systems. Two milled surfaces on the perimeter allow to fix the system with a tool. The holding surface is over molded with a hard type of rubber (TPE) and protects the magnet from strikes. At the same time the rubber effects a noise absorption. Article number:FG013NdAG06rh00 D mm:13 +0.2/ -0.2 H mm:16 +0.2/ -0.2 Thread MxL:M6x10 SW mm:11 b mm:Force* N Force* N:15 Weight g:13 Temperature °C:80

Bar magnets AlNiCo, steel body, zinc coated Article number:S6 D mm:6 +0.1/ -0.1 H mm:20 +0.2/ -0.2 A¹ mm:12 Weight g:4.5 Temperature °C:450

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F10-NdCv D mm:10 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 d1 mm:2.6 +0.1/ -0.1 d2 mm:5.2 +1/ 0 Force* N:19 Weight g:Temperature °C Temperature °C:80

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F6-SCBv D mm:6 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 Temperature °C:200