Produse pentru magnet din (770)

Following standard colours are available ex stock » transparent: blue, yellow, green, orange, red, black, nature » completely coloured: blue, yellow, green, orange, red, black, white » High force on a small surface » Manufactured without glue » easy to grip, easy to detach Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » higher holding force Article number:OM014NdRd00 D mm:14 H mm:17.7 Force* N:19 Packaging unit:5 pieces

Magnets in different designs as a visual highlight on your memo board. Article number:G-MAG12Ndni D mm:12 H mm:16 Force* N:55 Packaging unit:4 pieces

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:AS043NdA-04s-03 D mm:43 H mm:10.3 l mm:22 +0.1/ -0.1 Thread M:M4 Force* N:100 Shear force* N:30 Weight g:37 Temperature °C:60

» Attention very strong holding force in case of direct contact with metal » Are particularly suitable for walls with magnetic paint » Excellent air gap bridging Alternative to the standard we also offer individual solutions: » Lacquering also possible in other colours Article number:DSP19-Ndni D mm:19 Force* N:85 Weight g:12 Packaging unit:10 pieces

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:MS2ARm15x8x3.5 Grade:RCS26H D mm:15 +0.1/ -0.1 d mm:8 +0.1/ -0.1 H mm:3.5 +0.1/ -0.1 Magnetization:axially Force* N:23 Weight g:3.7 Temperature °C:350

Following standard colours are available ex stock: blue, yellow, green, orange, red, black, white Following standard colours are available short term: brown, grey, light blue, pink, turquoise, violet The NdFeB magnets with a diameter of less than 25 are not fitted with a plastic ring on the holding surface. Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » Plastic housing with metallized surface (for example silver) Article number:OMAG-10 D mm:10.5 H mm:6.5 Force* N:1.5 Weight g:1.5 Magnetization:bipolar Magnet:hard ferrite Packaging unit:20 pieces

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:MAASm3x10 Grade:ANC5 D mm:3 +0/ -0.2 H mm:10 +0.1/ -0.1 Magnetization:axially Force* N:1.1 Weight g:0.6 Temperature °C:450

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:RM012ACSo88r-00 Grade:ANC5 D mm:13 d mm:4.5 H mm:9.7 h mm:W mm W mm:4.5 Force* N:Surface Surface:red Weight g:Temperature °C Temperature °C:180

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:MNARm12x3.5x3 Grade:N35 D mm:12 +0.1/ -0.1 d mm:3.5 +0.1/ -0.1 H mm:3 +0.1/ -0.1 Countersunk:yes Force* N:18 Weight g:2.2 Temperature °C:80

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:MSAQm7.5x4x1.5 Grade:RCS26H L mm:7.5 +0.1/ -0.1 B mm:4 +0.1/ -0.1 H mm:1.5 +0.1/ -0.1 Magnetization:axially Force* N:3.4 Weight g:0.4 Temperature °C:350

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A18C-KsB3.0H6 D mm:18 d1 mm:d2 mm d2 mm:H mm H mm:h mm h mm:Force* N Force* N:25 Shear force* N:Weight g Weight g:5.5 Temperature °C:60

Decoration magnet, hard ferrite, white Article number:HAMAG-C D mm:43 H mm:37 Force* N:120 Weight g:84 Fixing:hook

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Alternative to the standard we also offer individual solutions: » Magnets are also available in other dimensions » Possible operating temperature up to max. 180°C » Magnets in self-adhesive version Article number:MNASm5x3 Grade:N35 D mm:5 +0.1/ -0.1 H mm:3 +0.1/ -0.1 Magnetization:axially Weight g:0.5 Temperature °C:80

Following standard colours are available ex stock: blue, yellow, green, orange, red, black, white Following standard colours are available short term: brown, grey, light blue, pink, turquoise, violet Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » Plastic housing with metallized surface (for example silver) Article number:OMAG-21 L mm:21 B mm:12.5 H mm:6.5 Force* N:1.5 Magnetization:multipole Magnet:hard ferrite Packaging unit:10 pieces

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » Printable rubber coat Article number:A43x31A-KsM4 L mm:43 B mm:31 H mm:6.9 Thread MxL:M4x4.5 Force* N:105 Shear force* N:45 Weight g:27 Temperature °C:60

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A18C-KwB3.0H6 D mm:18 d1 mm:d2 mm d2 mm:H mm H mm:h mm h mm:Force* N Force* N:25 Shear force* N:Weight g Weight g:5.5 Temperature °C:60

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A12AG-KsM4x8 D mm:12 H mm:L mm L mm:15.5 Thread M:M4x8 Force* N:13 Shear force* N:Weight g Weight g:4.5 Temperature °C:60

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:MSASm4x3 Grade:RCS26H D mm:4 +0.1/ -0.1 H mm:3 +0.1/ -0.1 Magnetization:axially Force* N:2.5 Weight g:0.3 Temperature °C:350

Following standard colours are available ex stock: blue, yellow, green, orange, red, black, white Following standard colours are available short term: brown, grey, light blue, pink, turquoise, violet Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » Plastic housing with metallized surface (for example silver) Article number:OMAG-11x L mm:11 B mm:11 H mm:6.5 Force* N:1.5 Weight g:1.5 Magnetization:bipolar Magnet:hard ferrite Packaging unit:20 pieces

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:RM100ACBk99mf00 Grade:ANC5 L mm:100 H mm:10 B mm:15 Force* N:17 Surface:red-green Weight g:107 Temperature °C:180

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Alternative to the standard we also offer individual solutions: » Magnets are also available in other dimensions » Possible operating temperature up to max. 180°C » Magnets in self-adhesive version Article number:MNAQm7.5x4x1.5 Grade:N35 L mm:7.5 +0.1/ -0.1 B mm:4 +0.1/ -0.1 H mm:1.5 +0.1/ -0.1 Magnetization:axially Weight g:0.4 Temperature °C:80

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A18D-KwM4 D mm:18 Thread M:M4 Force* N:25 Temperature °C:60

The temperature indicated refers to the maximum operating material temperature. However, that value can be reduced according to geometry. Article number:MFARm13x3.5x3.9 Grade:26/22 D mm:13.6 +0.3/ -0.3 d mm:3.5 +0.1/ -0.1 H mm:3.9 +0.1/ -0.1 Magnetization:axially Countersunk:yes Force* N:2.5 Weight g:2.5 Temperature °C:250

The magnetic door stay is intended for fitting/attachment in/to door leaves. When fitted, the magnetic door stay is hidden in the door leaf. A separate installation set (TFS26-MONT) is available. With both installation variants, the door is held at the installation point of the disc when the door leaf with integrated door stay slides over the disc. Product TFS26-HlsKs serves for side mounting of our door stay to the door leaf. Article number:TFS26-KsNd D mm:50 d mm:26 H mm:26 SW mm:34 Force* N:105 Weight g:63 Temperature °C:60

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A12AG-KwM4x8 D mm:12 H mm:L mm L mm:15.5 Thread M:M4x8 Force* N:13 Shear force* N:Weight g Weight g:4.5 Temperature °C:60

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » Printable rubber coat Article number:A43x31A-KwM4 L mm:43 B mm:31 H mm:6.9 Thread MxL:M4x4.5 Force* N:105 Shear force* N:33 Weight g:27 Temperature °C:60

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A43C-KsB7.0H6 D mm:43 d1 mm:7.5 d2 mm:12.8 H mm:Force* N Force* N:100 Shear force* N:30 Weight g:27 Temperature °C:60

Alternative to the standard we also offer individual solutions: » Lacquering also possible in other colours » Equipped with a closed eyelet » Higher holding force Article number:DEMAG-16 D mm:16 Hook:M3 Force* N:18

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F10A-vM3 D mm:10 +0.1/ -0.1 d mm:6 +0.1/ -0.1 H mm:4.5 +0.2/ -0.1 L mm:11.5 +0.3/ -0.2 Thread M:M3 Temperature °C:200

Bar magnet AlNiCo, steel body, with internal thread Article number:S12.5 D mm:12.5 +0.1/ -0.1 H mm:16 +0.2/ -0.2 Thread MxL:M4x6 Force* N:20 Surface:zinc coated Weight g:15 Temperature °C:350